Belkin Routers :: Setup Belkin F7D1301 With A 16 Port 10/100 Switch?
Apr 26, 2013How do I setup my Belkin F7D1301 with a 16 port 10/100 switch so I can use the wireless on the Belkin and have the 16 port switch for my hard wires?
View 1 Replies
ADVERTISEMENT
Belkin Routers :: Not Having Mac Filtering On F7d1301
Apr 13, 2013I have added a list of Mac numbers for allowed devices & checked the enable mac filtering box,but did not check the block box.All the Mac number devices, cannot access the wifi.But if I uncheck the "enable mac filtering box"all the Mac number devices can access the wifi.This also include other devices not in the list can also access to the wifi.It seem that the router can only block mac number BUT cannot have "allow list"I checked my firmware = 1.00.22 (Aug31 2000 14.36.01)Is this the latest firmware??
View 6 Replies View RelatedBelkin Routers :: Why Cannot Have Allow Mac Filtering On F7d1301
Feb 21, 2013I have added a list of Mac numbers for allowed devices & checked the enable mac filtering box, but did not check the block box.
All the Mac number devices, cannot access the wifi. But if I uncheck the "enable mac filtering box" all the Mac number devices can access the wifi.
This also include other devices not in the list can also access to the wifi. It seem that the router can only block mac number BUT cannot have "allow list"
I checked my firmware = 1.00.22 (Aug31 2000 14.36.01) Is this the latest firmware?
Belkin Routers :: F7D1301 Not Compatible With New Modem
Dec 16, 2012I was told by my Internet company that my router may not be compatible with my new modem (from them). I have a Basic Wireless Router. Model f7d1301. Purchased about 1 year ago. I was told that Belkin designs it this way so we have to buy a new one regularly. But 1 year!!! That is terrible. Is it true? Is this older router no good? I have purchased a new one and it seems to,have solved the problem. It does take me very happy that I already have to buy a new one....
View 1 Replies View RelatedBelkin Routers :: F7D1301 Turned To Solid Orange On Router
Oct 29, 2012F7D1301 v1 is my router model. i installed it this morning; all was working fine; then i changed password; still working fine; then i attempted to change pw a second time; router turned to solid orange and no matter what i try, i can't get it working again. i reset it, unplugged it, etc.
View 5 Replies View RelatedF7d1301 V1 / Belkin Wifi Router Not Working?
Jun 1, 2012My Belkin Wifi router which was working fine earlier has stopped working now. It shows a red/orange light and nothing else ( it normally shows a green light ). The light doesn't blink or flash. As a consequence, my wifi devices aren't connecting to the internet, however i can connect via my pc normally through my modem. I have a iball Baton modem and the model number of my wifi router is F7D1301 V1.
View 4 Replies View RelatedCabling / Cards :: Using Second Belkin F7d1301 Router As Repeater Or Range Extender?
Apr 7, 2011i have beetel adsl2+router connected to my main computer through ethernet cable but its wifi signal is very low. its signal hardly reach the other end of my house where my bedroom is, and i want to surf on my laptop or mobile from my bedroom only so basically i want to extend my wifi range or boost the signal the thing is i have a belkin f7d1301 basic n150 wireless router, i want to know whether i can use it as range extender or any other thing to boost my signal.
View 7 Replies View RelatedBelkin F7D1301 / Baton IBLR6111A - NAT Capable Modem Linked For Failover
Jan 31, 2013There are a total of 7 systems on the network. The network has evolved from two small shops (3-4 computers each) to a single one with a sum total of 7 systems. Historically there were two ISP (which the new management would like to continue). Thus there are two NAT enabled devices at the last-mile from each ISP
Belkin F7D1301
Baton iBLR6111A
Networking is almost an unknown to me. An ip config on the computers in the network brought the realization there are 2 sub-nets ... at least it looks like there are 2 sub-nets (192.168.1.x, and 192.168.2.x).
My gut tells me the above mentioned modem/router cannot be connected & configured to be used transparently for the computers connected to the other modem/router without additional hardware. Is this right?
Belkin Routers :: F5D9230-4 V5111 Belkin G Mimo Firmware Latest Version?
Apr 26, 2013(F5D9230-4 v5111 Belkin mimo router ) is version 5.02.08 the most up to date firmware for my router?
View 1 Replies View RelatedBelkin Routers :: Cannot Get Roku 2 XS Setup On A N750DB
Dec 20, 2012i have a n750db and cannot setup my roku 2 xs. anyone have success that they can share?
View 6 Replies View RelatedBelkin Routers :: F5D7632-4 - No Setup Assistant Software CD-ROM
Dec 29, 2012I've been given a F5D7632-4 modem router which is said to be in working order, but without the Setup Assistant Software CD-ROM. How can I get a replacement for this?
View 1 Replies View RelatedBelkin Routers :: F5D8233-4 Cannot Find CD Setup Assistant
May 22, 2013I have new Belkin router and giving old one to my brother. It is F5D8233-4. Can I install without the CD "setup assistant"?
View 1 Replies View RelatedBelkin Routers :: 5FD8235-4 V2 - Access Point Setup
Feb 2, 2013If I want to setup my N+ router 5FD8235-4 V 2 as an access point. How do I go about doing that?
View 5 Replies View RelatedBelkin Routers :: N150 - Disable Wifi From Setup Page?
Feb 10, 2013Is there a way to quickly disable Wi-Fi on a N-150 from the router setup page? I have looked on my admin page but I don't see it. I just want to be able to turn the radio on and off from the PC that is connected via ethernet.
View 3 Replies View RelatedBelkin Routers :: F9K1105 V3 Was Not Connected Periodically / Can't Access Setup
Jun 8, 2013Here is my Windows IP Configuration:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : domain.invalid
Link-local IPv6 Address . . . . . : fe80::102:103b:dc51:f708%10
IPv4 Address. . . . . . . . . . . : 192.168.254.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.254.254
I have been receiving error messages that the router, model F9K1105 v3, was not connected periodically. The "fix it" option usually took care of it. Then I noticed that the indicator for the modem was showing the color grey instead of blue. I also became unable to access the settings with the default IP. I wasn't able to fix this so I tried to reinstall the software and reset the modem to just start all over. I was unable to get the computer to detect the router during setup. Unplugged, tried new cable etc. No luck. It was still saying it was unable to connect, and still unable to get to setup page. I happened to notice I WAS online and can connect to the router wirelessly with an Iphone.
What can I do to get the software to see that I am connected and how do I get to the setup page? Basically get everything to work like it did when I first installed it. Eventually I want to connect my old router to this one and use it as an access point.
Belkin Routers :: F7D4302 - Can't Forward A Third Port
Mar 6, 2013I have two ports forwarded on my F7D4302 router, used for security cams, trying to add a third. The router does not open the third port. I've tried several different configuration without success. Since I've already been successful with the first two, I am puzzled.
View 2 Replies View RelatedBelkin Routers :: F5D8230-4 How To Set Up Port Forwarding
Dec 5, 2012I need to set up port forwarding to access a security camera from my home computer. I can't get it to work on my F5D8230-4.
View 8 Replies View RelatedBelkin Routers :: How To Get Port Forwarding On N750 Db
Feb 8, 2012how do i do port forwarding on my belkin n750 db i want to view my cams when not home i can view on my network not tmobile?
View 3 Replies View RelatedBelkin Routers :: No Wifi Protected Setup (wps) Light And Button On N600 Db
Dec 1, 2012On Page 16 of my N600 DB manual it says that below the "Router Status Light" and above the "WPS" letters there is a "Wi-Fi Protected Setup (WPS) Light and Button". When I look at my router all I see in this space is a raised rectangular plastic strip. Should I have a light and button there?
View 1 Replies View RelatedBelkin Routers :: How To Setup Universal Wireless HDTV Adapter F7D4555v1
Dec 11, 2012Could not find on Belkin website, hyperlink came up with "oops' result. Basic instructions to hook this up to my TV.
View 1 Replies View RelatedBelkin Routers :: Can N150 Setup To Just Run Private Network / Not Connect To Internet
Nov 5, 2012Can the N150 be set up so that it just runs a private network - not connect to the internet? The auto-setup doesn't seem to work without a modem attached to it and I don't want it to be hooked up to the outside world, just a few computers and a NAS device on a private net.
View 1 Replies View RelatedBelkin Routers :: N600 Accessing Hdd On Usb Port Is Very Slow
Oct 19, 2012Accessing my hdd on the usbport is very slow. Have a n600 router. Can I boost this in any way?
View 2 Replies View RelatedBelkin Routers :: Sub Netting N150 With Each Wired Port
Dec 10, 2012Can any of the wired/wireless routers like the n-150 be sub-netted with each wired port being its own subnet?
View 1 Replies View RelatedBelkin Routers :: N600 DB / Cannot Find Manual Link On Dashboard To Setup Manually
May 20, 2013N600 DB on OSX. I keep on reading the material that there is a link on the dashboard that I click on to set up the router manually. Nowhere on the dash board is that link. Where is that link?
View 1 Replies View RelatedBelkin Routers :: Surf N300 - Configuration With Lan Switch Through Network?
Nov 23, 2012We have 12 PC connected through a Switch(D-Link 10/100 mbps) with Configtured with Manual IP Address. the IP address range is 192.168.1.1 subnet mask 255.255.0.0 default gateway 192.168.1.1.Internet Cable Connected from Modem to Switch Directly & all the computer access internet by filling DNS with 202.56.224.153 other 59.144.127.17, We fill this DNS only where we want Internet access allowed by limiting that pc with Limited User access. How to configure Belkin Surf N300 Router with this network.
View 1 Replies View RelatedBelkin Routers :: F7D6301 V1 Can't Seem To Find That Page Again So Can Switch It Back
Mar 31, 2013I turned a Belkin Surf N300 into an access point using the settings page via IP address, now I can't seem to find that page again so I can switch it back. The model number is F7D6301 v1.
View 7 Replies View RelatedBelkin Routers :: No Support For F9J1005v1 - Port Forward / Firmware Update?
Dec 27, 2012There is no support for Model F9J1005v1. How do I update its firmware and how do I port forward on the same
View 2 Replies View RelatedBelkin Routers :: AC1200 - USB Port Doesn't Work With Canon Printer?
Feb 2, 2013I have a Belkin AC1200 Router. It seems working properly re Internet/Wireless connections. When I connect a printer (Canon Pixma MP500) through the USB port the (USB) light doesn't turn on, nor the printer is appearing on the "available devices" (Belkin USB Print and Storage Center).
View 2 Replies View RelatedBelkin N300 / D-Link N300 DIR-651 - Can Setup Two Wireless Routers To One Modem
Feb 20, 2013The main router is Belkin N300 and the new one is D-Link N300 DIR-651 for extended range.
View 1 Replies View RelatedBelkin N150 Disc For Setup
Apr 15, 2012i cant find my disc for setup?
View 2 Replies View RelatedWifi Isn't Connecting Although The Belkin Router Is Setup
Nov 10, 2012The other day my wifi was working the all of a sudden today my wifi stopped and said it's disconnected. On the router the only non-green light says "LINK"and it keeps flashing orange. How do i fix this because i cannot tweet pics from my phone without this working...
View 1 Replies View RelatedBelkin F5d7632 4 Wireless Router Setup?
Feb 2, 2013I have belkin f5d7632-4 router, it works ok wirelessley with my smartphone when it is 'open' but setting a passphrase on the router stops access from the phone even with the correct passphrase, other devices act the same as though it is the wrong passphrase
View 1 Replies View RelatedProtocols / Routing :: To Setup A Successful DMZ On Belkin Router
Jan 15, 2012I have a problem with my Belkin router that is ruining any online gaming experience I want to have. Any time I try to play a game on my PC, I have to deal with STRICT NAT. On my router setup page I have all security features off, UPnP is enabled, and i'm pretty sure I have my computer in a DMZ. (As far as I know a DMZ'd computer should have an Open Nat right?)When I use run>cmd>ipconfig it says my ip address is 192.168.2.2, which is the same exact thing that is in my DMZ box, but it isn't appearing to work.Does anybody have an idea how to set up a successful DMZ on a belkin router?
View 4 Replies View Related