Belkin Routers :: Cannot Get Roku 2 XS Setup On A N750DB
Dec 20, 2012i have a n750db and cannot setup my roku 2 xs. anyone have success that they can share?
View 6 Repliesi have a n750db and cannot setup my roku 2 xs. anyone have success that they can share?
View 6 RepliesOld phone iphone 4 connected.
View 1 Replies View RelatedN750DB status light is constant amber, router says I am not connected to the internet, but everything on my network is connected and can access the internet.
View 1 Replies View RelatedIPhone 5 will not connect to N750DB? Old phone iphone 4 connected.
View 1 Replies View RelatedI have a Belkin N750DB router. I've had it for about 1 month. It's worked great. This morning I got a message on my computer saying I needed to perform an update on the router. I did it and now the router won't turn back on. I've tried all of the easy stuff...unpluging power, unpugging internet, unpluging power to the modem that feeds into the router, pressed the reset button. I've even tried other electrical oputlets to make sure it wasn't the power supply. No little blue light. I'm technologically challenged to begin with. Oh, and I can't find the original disk that came with it. Is there anything I can do?
View 1 Replies View RelatedI have a Belkin N750DB (F9K1103) that has been working great for many months. All of the sudden, when I reboot it r power cycle it, it loses its configuration. Even if I restore the configuration, it immediately goes away. I have tried unplugging for an extended time and holding the reset button for a full factory reset.
View 1 Replies View RelatedIt seem like 2 or 3 times a day my router software says your router will reset in 3 minutes or something like that. How do I prevent this? I do have self healing turned on for 4 a.m. each morning but it resets at other times. I own a belkin n750db f9k1103 v.1
View 2 Replies View RelatedI have a N750Db router along with a Dual-band wireless range extender. It works great, but it created two new networks with "_xt" at the end of the SSID to denote the extended networks. This means I have to disconnect/reconnect to the base/extended networks as I move around my house. If I were to rename the extended networks to have the same SSID as the base networks, would that allow me to walk around my place without having to connect to the extended network, or will it create some sort of conflict or error?
View 3 Replies View RelatedWe added a Belkin N750DB wireless to our building yesterday. Everyone is working fine except one computer that is an apple. Her wi-fi keeps going on and off. Is there a setting we need to change so this stops happening and she has constant internet?
View 1 Replies View RelatedWhat do I do if I cannot access the setup address IE 198.168.2.1?I use my N750DB as a network booster at home. It runs via ethernet cable from the main router. I used to be able to get on no problem and now, I just can't. I have spent 2 days trying to sort my internet problems.
View 4 Replies View RelatedWhen I plug in my HP Ethernet Printers via the four LAN ports they are not seen
View 1 Replies View RelatedI keep getting "Speed Test: Error occurred during test." message when I run Streamline speed test on N750DB router. I'm not sure what my download and upload speeds are which is why I went with run a speed test to begin with.
View 17 Replies View RelatedHow do I setup my Belkin F7D1301 with a 16 port 10/100 switch so I can use the wireless on the Belkin and have the 16 port switch for my hard wires?
View 1 Replies View Relatedroku player will not connect through verizon router, message
View 1 Replies View RelatedI've been given a F5D7632-4 modem router which is said to be in working order, but without the Setup Assistant Software CD-ROM. How can I get a replacement for this?
View 1 Replies View RelatedI have new Belkin router and giving old one to my brother. It is F5D8233-4. Can I install without the CD "setup assistant"?
View 1 Replies View RelatedIf I want to setup my N+ router 5FD8235-4 V 2 as an access point. How do I go about doing that?
View 5 Replies View RelatedIs there a way to quickly disable Wi-Fi on a N-150 from the router setup page? I have looked on my admin page but I don't see it. I just want to be able to turn the radio on and off from the PC that is connected via ethernet.
View 3 Replies View RelatedHere is my Windows IP Configuration:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : domain.invalid
Link-local IPv6 Address . . . . . : fe80::102:103b:dc51:f708%10
IPv4 Address. . . . . . . . . . . : 192.168.254.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.254.254
I have been receiving error messages that the router, model F9K1105 v3, was not connected periodically. The "fix it" option usually took care of it. Then I noticed that the indicator for the modem was showing the color grey instead of blue. I also became unable to access the settings with the default IP. I wasn't able to fix this so I tried to reinstall the software and reset the modem to just start all over. I was unable to get the computer to detect the router during setup. Unplugged, tried new cable etc. No luck. It was still saying it was unable to connect, and still unable to get to setup page. I happened to notice I WAS online and can connect to the router wirelessly with an Iphone.
What can I do to get the software to see that I am connected and how do I get to the setup page? Basically get everything to work like it did when I first installed it. Eventually I want to connect my old router to this one and use it as an access point.
On Page 16 of my N600 DB manual it says that below the "Router Status Light" and above the "WPS" letters there is a "Wi-Fi Protected Setup (WPS) Light and Button". When I look at my router all I see in this space is a raised rectangular plastic strip. Should I have a light and button there?
View 1 Replies View RelatedCould not find on Belkin website, hyperlink came up with "oops' result. Basic instructions to hook this up to my TV.
View 1 Replies View RelatedCan the N150 be set up so that it just runs a private network - not connect to the internet? The auto-setup doesn't seem to work without a modem attached to it and I don't want it to be hooked up to the outside world, just a few computers and a NAS device on a private net.
View 1 Replies View RelatedN600 DB on OSX. I keep on reading the material that there is a link on the dashboard that I click on to set up the router manually. Nowhere on the dash board is that link. Where is that link?
View 1 Replies View RelatedThe main router is Belkin N300 and the new one is D-Link N300 DIR-651 for extended range.
View 1 Replies View Related(F5D9230-4 v5111 Belkin mimo router ) is version 5.02.08 the most up to date firmware for my router?
View 1 Replies View RelatedI am trying to setup a roku and the main router is about 30 ft away. I put in a repeater and it works for the laptop in the front room but not the roku. I was wondering if i could get a wireless adapter say the WET610N and configure it on the main computer then just plug it into the roku.
View 1 Replies View Relatedi put the password into Roku and it said that it couldn't connect and my computer can connect fine i don't know whats wrong with it
View 6 Replies View RelatedI have two Roku units and neither can connect to the internet with my Motorola sbg901 wireless modem. Up until just a few days ago I was able to connect just fine. I called my ISP (Cableone) and tried to have them change my DNS settings to open DNS to see if that fixed the problem but they said they wouldn't do that.
View 14 Replies View RelatedWe recently connected the Netgear WNR2000 to our modem. All wireless devices connect just fine, except for our Roku XD. It says there is an activation error. I've reset the box, unplugged, changed the channel via wireless settings. What's next??? I'm quite frustrated and would like to get this to work. The message I get is "activation issue. There was a problem connecting to the Roku server". Argh!! It was working fine with the other wireless modem/router (versalink 327W), but it kept going off (as in the signal would drop and we would have to turn it off/on to get it to work) and connected the netgear router to it today.
View 5 Replies View RelatedI have a router with wireless capabilities but my tv is far from the router and impossible to connect with an ethernet cable. Is there any way to install a Roku wirelessly to your HD tv?
View 3 Replies View RelatedI tried to set it up on a new dir 655 but the password the roku asks for does not work. I have the latest firmware installed. I tried entering my ssid manually and then the key. I did reset everything and try again. Why is my wireless not working? The ethernet port to my desktop is working fine.
View 2 Replies View RelatedI am trying to gain access to Netflix using a Roku player, but I need the network security key, which someone else originally set up for me. That person doesn't remember the network security key. Is there a way I can find out what the network security key is, or is there some way that I can set up another one?
View 3 Replies View RelatedHow do I get my router to connect to roku.When I enter my router password in Roku it doesn't find the router. And when I use Cisco Network Magic, it doesn't find the Roku device.
View 8 Replies View Related