Belkin Routers :: N750DB Not Connected To Internet
Feb 1, 2013N750DB status light is constant amber, router says I am not connected to the internet, but everything on my network is connected and can access the internet.
View 1 RepliesN750DB status light is constant amber, router says I am not connected to the internet, but everything on my network is connected and can access the internet.
View 1 RepliesOld phone iphone 4 connected.
View 1 Replies View Relatedi have a n750db and cannot setup my roku 2 xs. anyone have success that they can share?
View 6 Replies View RelatedIPhone 5 will not connect to N750DB? Old phone iphone 4 connected.
View 1 Replies View RelatedI have a Belkin N750DB router. I've had it for about 1 month. It's worked great. This morning I got a message on my computer saying I needed to perform an update on the router. I did it and now the router won't turn back on. I've tried all of the easy stuff...unpluging power, unpugging internet, unpluging power to the modem that feeds into the router, pressed the reset button. I've even tried other electrical oputlets to make sure it wasn't the power supply. No little blue light. I'm technologically challenged to begin with. Oh, and I can't find the original disk that came with it. Is there anything I can do?
View 1 Replies View RelatedI have a Belkin N750DB (F9K1103) that has been working great for many months. All of the sudden, when I reboot it r power cycle it, it loses its configuration. Even if I restore the configuration, it immediately goes away. I have tried unplugging for an extended time and holding the reset button for a full factory reset.
View 1 Replies View RelatedIt seem like 2 or 3 times a day my router software says your router will reset in 3 minutes or something like that. How do I prevent this? I do have self healing turned on for 4 a.m. each morning but it resets at other times. I own a belkin n750db f9k1103 v.1
View 2 Replies View RelatedI have a N750Db router along with a Dual-band wireless range extender. It works great, but it created two new networks with "_xt" at the end of the SSID to denote the extended networks. This means I have to disconnect/reconnect to the base/extended networks as I move around my house. If I were to rename the extended networks to have the same SSID as the base networks, would that allow me to walk around my place without having to connect to the extended network, or will it create some sort of conflict or error?
View 3 Replies View RelatedWe added a Belkin N750DB wireless to our building yesterday. Everyone is working fine except one computer that is an apple. Her wi-fi keeps going on and off. Is there a setting we need to change so this stops happening and she has constant internet?
View 1 Replies View RelatedWhat do I do if I cannot access the setup address IE 198.168.2.1?I use my N750DB as a network booster at home. It runs via ethernet cable from the main router. I used to be able to get on no problem and now, I just can't. I have spent 2 days trying to sort my internet problems.
View 4 Replies View RelatedWhen I plug in my HP Ethernet Printers via the four LAN ports they are not seen
View 1 Replies View RelatedI keep getting "Speed Test: Error occurred during test." message when I run Streamline speed test on N750DB router. I'm not sure what my download and upload speeds are which is why I went with run a speed test to begin with.
View 17 Replies View RelatedHow can I update my router if my Internet won't work with the router connected? Right now my Ethernet line is going directly from my PC to my modem. Belkin N750.
View 1 Replies View RelatedI have a N450DB wireless N Router model number F9K1105 and I'm connected to the internet with an occasional interuption. The light on the front of the router is blinking orange and I have reset it and powered it down several times with no luck. According to my settings I have the newest firmware and all updates have been performed.
View 3 Replies View RelatedI have a Belkin N450BD that doesn't seem to want to connect with my Siemens modem. The WLAN cable is connected to the WLAN port on my router but the WLAN light on the modem doesn't illuminate.
View 1 Replies View RelatedI purchased the Belkin N600DB, but I can't seem to find a way to reserve IP addresses for my connected devices. I need to run a server through the router, but (naturally) it keeps changing my local IP address. I cannot find the reservation utility.
View 1 Replies View Relatedsaying not connected when on router set up....when Ethernet is connected to laptop and router? n -router model f5d8236-4 v2
View 3 Replies View RelatedNewer router purchased in Sept. 2012, can't get laptop connected to it.
View 1 Replies View Relatedhow do I MANUALLY assign ip address to devices connected to my n300
View 1 Replies View RelatedAfter much troubleshooting to connect and stream content from my desktop to my blu-ray player, it only works if my laptop is also connected to the network. I use a Belkin N150 F9K1001v1. I cannot for the life of me figure out why it will stream just fine as long as my laptop is running as well. I am confused if this is an issue with the router or with Windows7 Homegroup (though other share options proved unfruitful).
View 2 Replies View RelatedHere is my Windows IP Configuration:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : domain.invalid
Link-local IPv6 Address . . . . . : fe80::102:103b:dc51:f708%10
IPv4 Address. . . . . . . . . . . : 192.168.254.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.254.254
I have been receiving error messages that the router, model F9K1105 v3, was not connected periodically. The "fix it" option usually took care of it. Then I noticed that the indicator for the modem was showing the color grey instead of blue. I also became unable to access the settings with the default IP. I wasn't able to fix this so I tried to reinstall the software and reset the modem to just start all over. I was unable to get the computer to detect the router during setup. Unplugged, tried new cable etc. No luck. It was still saying it was unable to connect, and still unable to get to setup page. I happened to notice I WAS online and can connect to the router wirelessly with an Iphone.
What can I do to get the software to see that I am connected and how do I get to the setup page? Basically get everything to work like it did when I first installed it. Eventually I want to connect my old router to this one and use it as an access point.
I have a Belkin N600 model # F9K1102v1 i am loosing connection on all of the components connected to it wired or wireless. They all loose connection at the same time. I also noticed the clock in the router does not set to the correct time it is reading 1970 for the year and never changes.
View 1 Replies View RelatedI have N600 HD Wireless dual band N Router. have successfully installed the router on wireless mode, however I have the following problem in accessing the storage devices connected to the Router.I can see the storage devices connected to the Router in the "Belkin USB Print and Storage center", but when I double click to browse the devices, it does not open up.
View 1 Replies View RelatedI have a 1TB hard drive connected to my N600DB that I use as a media server to my kids Xbox... My problem is that I use this drive to back up all my data from my laptop, including movies, pictures and music. I only want to share the movies... I have over 5000 pictures alone so my router never gets to index all the movies I want to share..
P.S. I have the F9K1102 v1 with Firmware 1.00.19
Can 2 N300 wireless bridges be connected to the same wireless access point ?
View 1 Replies View RelatedThis is the second time I have had this issue happen. Here is some probably useful information:
-I have (2) HP Pavillion dv6000 laptops running on Vista
-I have (1) iPad 2
-I am using a Belkin Surf N300 router
We lost power due to a storm last week, and both of my laptops would not connect to the Internet. I could connect to the router with access saying local only. I called Belkin and they changed some information on my laptop to allow me to connect. Now, I have the same issue with my other HP laptop and again called Belkin but they could not fix the issue. I can connect to the router and use the Internet on my iPad and (1) of my HP laptops, but not my last one. Even when I connect to the router with an Ethernet cable, it says local only access and no internet connection. So I did the ipconfig /all on both laptops and here is what they say..
Laptop that does NOT connect to Internet shows this:
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Melanie-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
I am having trouble keeping a stable internet connection when connecting through the router. I am on my third new router in one week thinking it was a router issue but I don't think so anymore. I am on cable internet using a motorola surfboard modem. The router I bought is a Belkin N750. I also tried a Cisco E1200 and EA2700 with no luck. I have been on the phone with support for probably ten hours total and tried all of their settings to no avail.
View 4 Replies View RelatedI have a Belkin G Wireless Router which until recently, apart from a few signal drop-outs, was working fine.A couple of weeks ago, I tried to connect to the internet but despite the icon on my netbook showing that my Wireless Network Connection is connected and has excellent strength, I am unable to open any webpages etc. I tried re-booting the router but it is still not working.
The modem is working fine as I am able to access the netbook if I plug my netbook into it directly and I don't think it is an issue with my netbook as I have the same problem if I try to connect my HTC Smartphone to the internet through Wi-Fi too, eg recognises signal but cannot access pages.The router was permanently plugged in and turned on which I have since heard tends to burn them out so I am thinking it might be an issue with the router.
My neighbor is using my Belkin Router the basic one and has comcast. We both use his internet and have had no problems until the past 3 days. He just got the home phone service from comcast and the phone line is setup through the modem. Ever since comcast came to his apartment and set this up the home phone service to his modem the router is connected but there is no internet access. What is going on and how can I fix this. He has an HP with windows Vista and I have a Toshiba Satellite L675 that has Windows 7 Home premium edition on it.
View 1 Replies View RelatedCan't get internet.I can plug laptop directly into modem and works fine. When I plug modem into brand new wireless router (N300) the light glows amber. I've been through the set-up 10 times. Actually the same reason I replaced old router with this one.
View 2 Replies View Relatedmy belkin G F5D7234-4 router internet light won't come on??
View 1 Replies View RelatedI have a belkin n300 and it whilst the modem itself is showing a static blue light, its coming up as an explanation mark on the wifi symbol on my macbook. This has been happening since yesterday when I was fiddling around with the settings on the IP address (192.168.2.1) to get the printer to work wirelessly which it did once then the wifi network went down.
View 1 Replies View RelatedI havent been able to connect to the internet with my wireless Belkin N150 router in 2 days! I have tried everything. I have done everything on this website and it still will not get on the internet. My modem works fine.
View 3 Replies View Related