Belkin Routers :: N300 Wireless Bridges Be Connected To Same Access Point
Nov 21, 2012Can 2 N300 wireless bridges be connected to the same wireless access point ?
View 1 Replies
ADVERTISEMENT
Belkin Routers :: Setting Up Max N300 As Access Point With USB Drive
Dec 17, 2012I wanted to set Belkin Share Max n300 as an access point. I followed the instructions, set the IP address to the suggested one and connected it to the main router. It worked, computer connected to the Belkin via wire was getting IP address from DHCP on main router. But: The Belkin device itself became invisible. I lost connection to Belkin device via config page via HTTP. It does not respond to any IP address so I actually cannot use it for purpose I wanted to set up secondary Wi-fi, I just cannot configure it. Also I wanted to use USB ports of the Belkin to connect external drives. I cannot do it as well. More over it does not go back. It does not reset to the original router option.
View 2 Replies View RelatedBelkin Routers :: Configure N300 As Access Point - Unidentified Network?
Nov 9, 2012As per settings menu, I tried to give it an IP address but the new address is not accessible for further configuration. When I connected to the router it status changes to "unidentified network".
My primary network address range is 192.168.1.1 to 192.168.1.10. So I gave address to belkin as 192.168.1.100. But I can not access this address from both primary and belkin network.
Belkin Routers :: Assign Ip Address To Devices Connected To N300?
Jan 5, 2013how do I MANUALLY assign ip address to devices connected to my n300
View 1 Replies View RelatedBelkin N300 / D-Link N300 DIR-651 - Can Setup Two Wireless Routers To One Modem
Feb 20, 2013The main router is Belkin N300 and the new one is D-Link N300 DIR-651 for extended range.
View 1 Replies View RelatedBelkin Routers :: No Guest Access On N300 F9K1002v1?
Jun 1, 2013I have a N300 f9k1002v1 router and would like to add guest access. Unfortuantely I can't find any info on how to do this. The user guide alludes to it but has no details. I also checked out this link: [URL]
since my router setp does not show "guest access" under "wireless" I skipped to #6 as stated. However when I get to #9 there is no "guest settings" dropdown for me to use.
Belkin Routers :: No Access To Internet Via A N300 Wi-Fi Extender?
Mar 10, 2013My N300 Wifi Range Extender does not let me connect to Internet. I can access other systems connected on the main WIfi network, but I cannot access Internet.I observe as well that all systems connected to the Extender appear, from the main Wifi network, having the same Mac address. I believe that my ISP (Telenet) does not accept that, and that this is the reason I cannot connect to Internet. Is there any way to change that behaviour ?
View 9 Replies View RelatedBelkin Routers :: N300 Internet Access Through Router
Dec 9, 2012i m using belking sufr n300 but i m not able to access internet. if i connect brodband cable directly to computer then i am able to browse.
View 1 Replies View RelatedBelkin Routers :: N300 Has No Wireless Activity
Jan 2, 2013This morning I lost wifi connectivity. I reset the router and powered off and on the modem along with the router but to no avail. The blue stripe no longer shows on the top corner of the machine.I am able to connect to the internet using the ethernet ports on the router. I also tried to get into programming using 192.168.2.1 but it is timing out.
View 1 Replies View RelatedBelkin Routers :: Set-up N300 Wireless Without Modem?
Feb 12, 2013Can I set-up the N300 wireless router without a modem, this I want to use for wireless printer connections only for several PCs
View 2 Replies View RelatedBelkin Routers :: Slow Wireless Speed With N300
Apr 23, 2013I purchased a Belkin N-300 router, model F9K1002V4, about 6 months ago, and recently upgraded my cable internet service to a 20+ mbps level, in hopes of improving the speed of my wireless devices. The speed on all of my wireless devices (a new laptop, ipad, and iphone) is still below 1mbps, even when I'm in the same room with the router. The speed on my wired computer registers above 20mbps, so I don't think the problem lies with the cable internet. I have tried to download the firmware update on Belkin's site, but my computer says it doesn't have the right program to run it, and it can't find the program on the web. I sent an e-mail to Belkin customer service, but they just sent me an automated reply, referring me back to their website, with the firmware update that I can't access.
View 4 Replies View RelatedBelkin Routers :: N600 - Unable To Access Dashboard In Access Point Mode?
Mar 6, 2013Setup N600 DB as an access point using the most recent firmware,3.03.12? Once I do I'm not able to access the dashboard even through I enabled the remote management option.
View 2 Replies View RelatedBelkin Routers :: N750 - Access Point Support Of Guest Access
Jan 9, 2013Does the N750 (F9K1103V1) support Guest Access while in Access Point mode? It will not provide an IP address when a guest attempts to connect.
View 20 Replies View RelatedBelkin Routers :: F9K1102 V1 Guest Access While In Access Point Mode
Jan 17, 2013I have an n600 ( F9K1102 v1 , firmware 1.00.09 ). My ISP provides my main router for my network, but I want to use the N600 as an access point, I have activated the "Use as Access Point" feature.Is it possible to still utilize the Guest Access feature in this case?
View 1 Replies View RelatedRouters / Switches :: Belkin Wireless N300 Has Orange Light
Feb 12, 2012Belkin wireless n300 router has an orange light. All of the cables are plugged in and have tried ipconfig?
View 1 Replies View RelatedBelkin Routers :: N300 Can't Get Sky On Demand Wireless Bridge To Work
Nov 23, 2012I have just bought a n300 everything works well except i cant get my sky on demand wireless bridge to work , sky have said all ok, as have my broadband supplier. im told i need to maybe change my wireless settings in router !
View 2 Replies View RelatedBelkin Routers :: Change Wireless Encryption From AES To TKIP On N300?
Feb 2, 2013The entry on the Router wireless > Security page shows WPA2-PSK as selectable. But, AES is not.
View 2 Replies View RelatedBelkin Routers :: N300 - Cannot Connect Usb Adapter To Wireless Router
Mar 1, 2013my netgear wireless router cannot see my n300 usb adapter. it shows as working in my device manager, but the netgear router says wireless not connected. when installing the adapter it said that windows has an icon to the left of the taskbar that i can click on and ask to join a network, which it didnt. it just showed network and an option to open network and sharing center, which i did. there were no wireless networks that showed available for me to log into with the adapter
View 4 Replies View RelatedBelkin Routers :: Using F5D7230-4 As Access Point?
Dec 20, 2012Can I use my F5D7230-4 as an access point? I need to provide a hardwired ethernet connection to my A/V reciever but not have a wired port in the area of my house. I have an existing wireless router thru Century Link. Could I have the Belkin attach itself to the wireless network and then have a cat 5 come out of one of the four ports to connect my A/V reciever to the network?
View 1 Replies View RelatedBelkin Routers :: Connecting 4TB Seagate BackupPlus USB HDD To ShareMax N300 Wireless
Jan 26, 2013I am trying to connect a Seagate Backup Plus 4TB USB HDD to the USB port on my Belkin ShareMax N300 wireless router. The router does not recognize this HDD. I know that the HDD is functioning because it works when I connect it directly to my laptop USB. I also know the Belkin USB port is working because it recognizes a 4GB USB memory stick and a 320GB Toshiba USB HDD. Is there a fundamental compatability problem, or is there some configuration that must be performed (e.g., reformat from NTFS to FAT32, etc.)? I saw some message traffic on the Belkin support site that indicated some issues with earlier versions of Belkin routers using larger HDDs (e.g., 4 TB). My router has a serial number 121026G3101468, model number F7D7301 v1.
View 3 Replies View RelatedBelkin Routers :: 5FD8235-4 V2 - Access Point Setup
Feb 2, 2013If I want to setup my N+ router 5FD8235-4 V 2 as an access point. How do I go about doing that?
View 5 Replies View RelatedBelkin Routers :: F9K1102 V3 Access Point IP Error
Mar 23, 2013When I set up the Belkin F9K1102 as an access point I can no longer access it via the ip-address and it does not accept the new ip-address I've given it, but takes the ip-address 192.168.2.254, while my network is on the 192.168.1.XXX address series. The only way I can do this is by manually given the router a new address, then manually turn of the DHCP- server and finally move the internet cable from the WAN port to one of the LAN ports - but then the LED-indicator on the router is blinkin red.
View 2 Replies View RelatedBelkin Routers :: N600 - Access Point Addition
Dec 28, 2012I have a Belkin Play N600 as my primary and have an older Belkin G+MiMO that I'd like to connect as an access point only. Any step by step instructions of how to accomplish this?
View 1 Replies View RelatedBelkin Routers :: Can Connect Wireless Range Extender N300 To N600 For Better Coverage
Oct 21, 2012I have decided to buy belkin n600 router. my question is can i connect Belkin wireless range extender n300 to belkin n 600 for beater coverage. is this possible ? if possible how many extender i can connect to the router and also can i connect extender with wire and wireless.
View 12 Replies View RelatedBelkin Routers :: Configuring An Older 5FD8230-4 As Access Point?
Dec 16, 2012I am trying to configure an older Belkin Router (Model Number 5FD8230-4) as an Access Point so that I can boost the range of my network. The problem I have is in configuring the old router. It won't allow me to change any settings, or at least the changes don't stick, even after clicking "apply changes". I tried creating an administrative password but I am not even sure that this is working. I am using a Macbook, so perhaps this is an Apple compatibility issue. I have tried resetting the router and reverting to Factory default settings, but no joy.
View 3 Replies View RelatedBelkin Routers :: N600DB Using Router As Access Point / Range Extender
May 16, 2013I have a N600DB configured as a primary router. I got another playmax n600HD router which I want to configure as an access point that extends my network upstairs and allows me to attach some wired devices like my ps3. I followed the basic principles of setting as access point and my locally connected ps3 and NAS are communicating but no Internet access. How the 2nd router can connect to the internet?
View 2 Replies View RelatedBelkin Routers :: F9K1105 V3 Was Not Connected Periodically / Can't Access Setup
Jun 8, 2013Here is my Windows IP Configuration:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : domain.invalid
Link-local IPv6 Address . . . . . : fe80::102:103b:dc51:f708%10
IPv4 Address. . . . . . . . . . . : 192.168.254.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.254.254
I have been receiving error messages that the router, model F9K1105 v3, was not connected periodically. The "fix it" option usually took care of it. Then I noticed that the indicator for the modem was showing the color grey instead of blue. I also became unable to access the settings with the default IP. I wasn't able to fix this so I tried to reinstall the software and reset the modem to just start all over. I was unable to get the computer to detect the router during setup. Unplugged, tried new cable etc. No luck. It was still saying it was unable to connect, and still unable to get to setup page. I happened to notice I WAS online and can connect to the router wirelessly with an Iphone.
What can I do to get the software to see that I am connected and how do I get to the setup page? Basically get everything to work like it did when I first installed it. Eventually I want to connect my old router to this one and use it as an access point.
Belkin Routers :: Can't Get On Internet N300
Jan 28, 2013Can't get internet.I can plug laptop directly into modem and works fine. When I plug modem into brand new wireless router (N300) the light glows amber. I've been through the set-up 10 times. Actually the same reason I replaced old router with this one.
View 2 Replies View RelatedBelkin Routers :: Does N300 Support WDS
Jan 24, 2013Why I cannot find "Wireless Bridging" under "Wireless" of my belkin n300. Its model is F9k1002v1.
View 2 Replies View RelatedBelkin Routers :: N600 HD - Unable To Access Connected Storage Devices?
Jan 27, 2013I have N600 HD Wireless dual band N Router. have successfully installed the router on wireless mode, however I have the following problem in accessing the storage devices connected to the Router.I can see the storage devices connected to the Router in the "Belkin USB Print and Storage center", but when I double click to browse the devices, it does not open up.
View 1 Replies View RelatedBelkin Routers :: N300 - Connecting 2 Routers In Series?
Dec 29, 2012I have two matching N300 Belkin routers. The cable modem feeds into modem1 and modem1 feeds into modem2. I get a good wireless connection on modem1. Modem2 shows up on a wireless scan and it accepts the password. It however will not connect.
View 1 Replies View RelatedBelkin Routers :: How To Locate The MTU Setting On N300
Nov 23, 2012I'm trying to resolve an issue I've been having with Google Chrome. I've found a possible fix but i need to confirm the MTU settings on my router and was unable to locate the setting using the web interface for the router.
View 3 Replies View RelatedBelkin Routers :: Max Out Transmission Signal On N300?
Dec 6, 2012my neighbors cant pick up my signal unless they are outside. can i boost the signal from my router?
View 1 Replies View Related
