As per settings menu, I tried to give it an IP address but the new address is not accessible for further configuration. When I connected to the router it status changes to "unidentified network".
My primary network address range is 192.168.1.1 to 192.168.1.10. So I gave address to belkin as 192.168.1.100. But I can not access this address from both primary and belkin network.
I wanted to set Belkin Share Max n300 as an access point. I followed the instructions, set the IP address to the suggested one and connected it to the main router. It worked, computer connected to the Belkin via wire was getting IP address from DHCP on main router. But: The Belkin device itself became invisible. I lost connection to Belkin device via config page via HTTP. It does not respond to any IP address so I actually cannot use it for purpose I wanted to set up secondary Wi-fi, I just cannot configure it. Also I wanted to use USB ports of the Belkin to connect external drives. I cannot do it as well. More over it does not go back. It does not reset to the original router option.
View 2 Replies View RelatedCan 2 N300 wireless bridges be connected to the same wireless access point ?
View 1 Replies View RelatedI have a N300 f9k1002v1 router and would like to add guest access. Unfortuantely I can't find any info on how to do this. The user guide alludes to it but has no details. I also checked out this link: [URL]
since my router setp does not show "guest access" under "wireless" I skipped to #6 as stated. However when I get to #9 there is no "guest settings" dropdown for me to use.
My N300 Wifi Range Extender does not let me connect to Internet. I can access other systems connected on the main WIfi network, but I cannot access Internet.I observe as well that all systems connected to the Extender appear, from the main Wifi network, having the same Mac address. I believe that my ISP (Telenet) does not accept that, and that this is the reason I cannot connect to Internet. Is there any way to change that behaviour ?
View 9 Replies View Relatedi m using belking sufr n300 but i m not able to access internet. if i connect brodband cable directly to computer then i am able to browse.
View 1 Replies View RelatedI need configuring my N900 router to be able to use Microsoft's Remote Desktop Connection to get into my computer from a client's location. I also want to be able to host websites I'm developing so my clients can see the changes before publishing to their website. I have not been able to find anywhere what settings to set to what in order for these two things to be available to me.
View 2 Replies View RelatedThe main router is Belkin N300 and the new one is D-Link N300 DIR-651 for extended range.
View 1 Replies View RelatedI've just hooked up my previously used N300 router. The router is showing a solid green light, and the laptop recognizes that a solid Belkin wireless connection is out there. I cannot for the life of me remember the network key and/ or pass phrase I originally set. No, I did not tape this info to the underside of the router as suggested in Belkin instructions.
View 6 Replies View RelatedWe have 12 PC connected through a Switch(D-Link 10/100 mbps) with Configtured with Manual IP Address. the IP address range is 192.168.1.1 subnet mask 255.255.0.0 default gateway 192.168.1.1.Internet Cable Connected from Modem to Switch Directly & all the computer access internet by filling DNS with 202.56.224.153 other 59.144.127.17, We fill this DNS only where we want Internet access allowed by limiting that pc with Limited User access. How to configure Belkin Surf N300 Router with this network.
View 1 Replies View RelatedI have a belkin surf n300 usb wireless N micro adapter. No problems installing this adapter on a HP Desktop running windows 7. I have tried to install on a gateway laptop also running windows y 64 bit. In device manager it show that the product is working. It will not connect to any network. The adapter is an F7D2102 az ver. 2011az
View 2 Replies View RelatedI have a belkin N300 router that works decent most of the time, but anytime my roommate connects with her macbook pro the whole network becomes slow to the point of uselessness. If i block her computer using mac address filtering, the latency and download speeds are right where they should be, but as soon as i allow her back on ping jumps to 800-1000 and DL speeds drop to under 1mb.
View 1 Replies View RelatedCan I put more than one N300 Dual-Band Wi-Fi Range Extender on my home network?
View 4 Replies View RelatedSetup N600 DB as an access point using the most recent firmware,3.03.12? Once I do I'm not able to access the dashboard even through I enabled the remote management option.
View 2 Replies View RelatedDoes the N750 (F9K1103V1) support Guest Access while in Access Point mode? It will not provide an IP address when a guest attempts to connect.
View 20 Replies View RelatedI have an n600 ( F9K1102 v1 , firmware 1.00.09 ). My ISP provides my main router for my network, but I want to use the N600 as an access point, I have activated the "Use as Access Point" feature.Is it possible to still utilize the Guest Access feature in this case?
View 1 Replies View RelatedCan I use my F5D7230-4 as an access point? I need to provide a hardwired ethernet connection to my A/V reciever but not have a wired port in the area of my house. I have an existing wireless router thru Century Link. Could I have the Belkin attach itself to the wireless network and then have a cat 5 come out of one of the four ports to connect my A/V reciever to the network?
View 1 Replies View RelatedIf I want to setup my N+ router 5FD8235-4 V 2 as an access point. How do I go about doing that?
View 5 Replies View RelatedWhen I set up the Belkin F9K1102 as an access point I can no longer access it via the ip-address and it does not accept the new ip-address I've given it, but takes the ip-address 192.168.2.254, while my network is on the 192.168.1.XXX address series. The only way I can do this is by manually given the router a new address, then manually turn of the DHCP- server and finally move the internet cable from the WAN port to one of the LAN ports - but then the LED-indicator on the router is blinkin red.
View 2 Replies View RelatedI have a Belkin Play N600 as my primary and have an older Belkin G+MiMO that I'd like to connect as an access point only. Any step by step instructions of how to accomplish this?
View 1 Replies View RelatedI am trying to configure an older Belkin Router (Model Number 5FD8230-4) as an Access Point so that I can boost the range of my network. The problem I have is in configuring the old router. It won't allow me to change any settings, or at least the changes don't stick, even after clicking "apply changes". I tried creating an administrative password but I am not even sure that this is working. I am using a Macbook, so perhaps this is an Apple compatibility issue. I have tried resetting the router and reverting to Factory default settings, but no joy.
View 3 Replies View RelatedI have a N600DB configured as a primary router. I got another playmax n600HD router which I want to configure as an access point that extends my network upstairs and allows me to attach some wired devices like my ps3. I followed the basic principles of setting as access point and my locally connected ps3 and NAS are communicating but no Internet access. How the 2nd router can connect to the internet?
View 2 Replies View RelatedHow do I change the channel on my WAP45. I can't connect I get a message unidentied-no access
View 1 Replies View RelatedCan't get internet.I can plug laptop directly into modem and works fine. When I plug modem into brand new wireless router (N300) the light glows amber. I've been through the set-up 10 times. Actually the same reason I replaced old router with this one.
View 2 Replies View RelatedWhy I cannot find "Wireless Bridging" under "Wireless" of my belkin n300. Its model is F9k1002v1.
View 2 Replies View RelatedI have two matching N300 Belkin routers. The cable modem feeds into modem1 and modem1 feeds into modem2. I get a good wireless connection on modem1. Modem2 shows up on a wireless scan and it accepts the password. It however will not connect.
View 1 Replies View Relatedi have a LAN network between several pc's connected with several switch's and connected to Thomson SpeedTouch 510 DSL Router its ip address is 10.0.0.100 subnet 255.0.0.0 and the router dont give auto ip to the PCs i have to issign it manually to the PCs "static ip".I bought the acer android recently so i bought a tp-link td-w8901g wireless router to act as an access point so i connected the 2 routers to each other by LAN and gave the tp-link an ip address 10.0.0.12 subnet mask 255.0.0.0 so it will be the same ip range of the speedtouch and setuped the tp-link router to fit my isp configeration it worked at first but i had to reset the router so i did the same configuration i did before but didnt work and i cant access the internet using the android or the wireless but when i connect the phone to the tp-link and unplug the speedtouch the wireless works so theres no any problem with the router?
View 1 Replies View RelatedThis morning I lost wifi connectivity. I reset the router and powered off and on the modem along with the router but to no avail. The blue stripe no longer shows on the top corner of the machine.I am able to connect to the internet using the ethernet ports on the router. I also tried to get into programming using 192.168.2.1 but it is timing out.
View 1 Replies View RelatedI'm trying to resolve an issue I've been having with Google Chrome. I've found a possible fix but i need to confirm the MTU settings on my router and was unable to locate the setting using the web interface for the router.
View 3 Replies View RelatedCan I set-up the N300 wireless router without a modem, this I want to use for wireless printer connections only for several PCs
View 2 Replies View Relatedmy neighbors cant pick up my signal unless they are outside. can i boost the signal from my router?
View 1 Replies View RelatedCan the Surf N300 be used as a WiFi repeater? Can the Surf N300 be used as a WiFi Access Point?
View 1 Replies View RelatedI have a belkin n300 and it whilst the modem itself is showing a static blue light, its coming up as an explanation mark on the wifi symbol on my macbook. This has been happening since yesterday when I was fiddling around with the settings on the IP address (192.168.2.1) to get the printer to work wirelessly which it did once then the wifi network went down.
View 1 Replies View Related