If the Belkin Surf N300 (Model No F9J1002v1) is CN21/ADSL2 compatible? It doesn't mention it on the box and try as I may I can't get through to tech support UK as I keep getting cut off and the J model router is not recognized on the UK website only the K
Windows cannot open this file (the update). what program opens the update? I just bought a SURF N300 v F7D6301 and am trying to install the update on the website, but I just get a box that says windows cannot open this file.. what program do i need to tell it to use to open the update?
We have 12 PC connected through a Switch(D-Link 10/100 mbps) with Configtured with Manual IP Address. the IP address range is 192.168.1.1 subnet mask 255.255.0.0 default gateway 192.168.1.1.Internet Cable Connected from Modem to Switch Directly & all the computer access internet by filling DNS with 220.127.116.11 other 18.104.22.168, We fill this DNS only where we want Internet access allowed by limiting that pc with Limited User access. How to configure Belkin Surf N300 Router with this network.
I have a belkin surf n300 usb wireless N micro adapter. No problems installing this adapter on a HP Desktop running windows 7. I have tried to install on a gateway laptop also running windows y 64 bit. In device manager it show that the product is working. It will not connect to any network. The adapter is an F7D2102 az ver. 2011az
I am experiencing a great inconvenience with my relatively new Belkin Surf+ N300 wireless ADSL router.I am confident that the router has been doing this since I got it, however I have not noticed until now. Whenever I try to access a URL with the word "router" anywhere in it (e.g url...) it will take me to my router's settings page (usually comes up when the router's LAN IP is entered)Yes this is very handy if you don't know the LAN IP, or are less skilled in router management, however if, like in my case, you like to access websites with "router" in their URL, you have a serious problem. I have tried factory resets, and have scoured through the settings of the router but have been so far unsuccessful.
I connected a Belkin Surf N300 Wireless N Modem-Router have been trying 2 weeks to get it to work wirelessly, The icon for Belkin bottom right side of screen says "Connected to the belkin router via ethernet cable, and if I click the icon for computer connection info it says "Unidentified network (Belkin) Acess: Local Only.) I can use the internet while I have the ethernet cable attached to computer and using wired broadband, but once I take out cable I lose all connection. Have been in touch with Belkin by phone for 4 hours, they replaced unit but still can't get the wireless internet, the wireless is turned on(WAN & Bluetooth are turned on)
I have two netgear routers: N300 WNR2000v2 and N150 WNR1000v3. Both routers have the latest firmware. All computers have window 7. I was wondering if it would be at all possible to set up one of the routers as a repeater?
Can't get internet.I can plug laptop directly into modem and works fine. When I plug modem into brand new wireless router (N300) the light glows amber. I've been through the set-up 10 times. Actually the same reason I replaced old router with this one.
I have two matching N300 Belkin routers. The cable modem feeds into modem1 and modem1 feeds into modem2. I get a good wireless connection on modem1. Modem2 shows up on a wireless scan and it accepts the password. It however will not connect.
This morning I lost wifi connectivity. I reset the router and powered off and on the modem along with the router but to no avail. The blue stripe no longer shows on the top corner of the machine.I am able to connect to the internet using the ethernet ports on the router. I also tried to get into programming using 192.168.2.1 but it is timing out.
I'm trying to resolve an issue I've been having with Google Chrome. I've found a possible fix but i need to confirm the MTU settings on my router and was unable to locate the setting using the web interface for the router.
I have a belkin n300 and it whilst the modem itself is showing a static blue light, its coming up as an explanation mark on the wifi symbol on my macbook. This has been happening since yesterday when I was fiddling around with the settings on the IP address (192.168.2.1) to get the printer to work wirelessly which it did once then the wifi network went down.
Cannot get wireless from any computers in home or room even the computer that I have installed the Belkin N300 on. When I click on the Belkin Icon on task bar get message "Wireless hardware not found" followed by comments about wireless radio not turned on and then how to recognize it with wireless radio icons. Now what do I do?
I have a Belkin Surf N300 wireless Modem-Router, but cannot get it to connect to my Android phone. I can connect it to my Nexus tablet, to my desk-top and my lap-top, so I know there is nothing wrong with the router itself. Every time I try to connect the phone, it locates the network, scans, authenticates, but then says "Disabled" and the message: "Secured with WPA/WPA2 PSK" with "locked network" symbol. What does this mean? This is on the label that came with the router: "Security Type WPA/WPA2" but I don't know what to do in order to remove the lock. The phone is a Vodafone Smart Chat and I bought it specifically to be able to connect to Wi-Fi networks.
I have a N300 f9k1002v1 router and would like to add guest access. Unfortuantely I can't find any info on how to do this. The user guide alludes to it but has no details. I also checked out this link: [URL]
since my router setp does not show "guest access" under "wireless" I skipped to #6 as stated. However when I get to #9 there is no "guest settings" dropdown for me to use.
I've just hooked up my previously used N300 router. The router is showing a solid green light, and the laptop recognizes that a solid Belkin wireless connection is out there. I cannot for the life of me remember the network key and/ or pass phrase I originally set. No, I did not tape this info to the underside of the router as suggested in Belkin instructions.
I just purchased a Belkin N300 and it's advertised as being able to video chat as well as have two computers connected to it. I can't even watch youtube videos with just one laptop connected because the ads take 5 minutes to load. Is this normal behavior for this router? Do I need to upgrade to be able to Skype?
N300 F9K1002v3 not loading some websites , other websites load just fine.Brand new just arrived yesterday afternoon.I have restarted the router.I have updated the firmware.I have reset the router by holding in the button on the back of the router. When I plug my computer directly into my modem everything works fine.
I purchased a Belkin N-300 router, model F9K1002V4, about 6 months ago, and recently upgraded my cable internet service to a 20+ mbps level, in hopes of improving the speed of my wireless devices. The speed on all of my wireless devices (a new laptop, ipad, and iphone) is still below 1mbps, even when I'm in the same room with the router. The speed on my wired computer registers above 20mbps, so I don't think the problem lies with the cable internet. I have tried to download the firmware update on Belkin's site, but my computer says it doesn't have the right program to run it, and it can't find the program on the web. I sent an e-mail to Belkin customer service, but they just sent me an automated reply, referring me back to their website, with the firmware update that I can't access.
I need to reset the channel on my N300 router but in order to do so, I need to log in. The log in screen does not take my existing password. How do I get my current password or reset my password? It should be the simplest thing, but I have found this to be extremely difficult with Belkin.
My N300 Wifi Range Extender does not let me connect to Internet. I can access other systems connected on the main WIfi network, but I cannot access Internet.I observe as well that all systems connected to the Extender appear, from the main Wifi network, having the same Mac address. I believe that my ISP (Telenet) does not accept that, and that this is the reason I cannot connect to Internet. Is there any way to change that behaviour ?