Belkin Routers :: Configuring An Older 5FD8230-4 As Access Point?

Dec 16, 2012

I am trying to configure an older Belkin Router (Model Number 5FD8230-4) as an Access Point so that I can boost the range of my network. The problem I have is in configuring the old router. It won't allow me to change any settings, or at least the changes don't stick, even after clicking "apply changes". I tried creating an administrative password but I am not even sure that this is working. I am using a Macbook, so perhaps this is an Apple compatibility issue. I have tried resetting the router and reverting to Factory default settings, but no joy.

View 3 Replies


ADVERTISEMENT

Belkin Routers :: Connecting To Printer Through N600 With Older IMac

Dec 10, 2012

I have an iMac running 10.4.11. I would like be able to print through the router. I now have my PC laptops doing so. What voodoo do I have to do to make the iMac work with it?

View 3 Replies View Related

Belkin Routers :: N600 - Unable To Access Dashboard In Access Point Mode?

Mar 6, 2013

Setup N600 DB as an access point using the most recent firmware,3.03.12? Once I do I'm not able to access the dashboard even through I enabled the remote management option.

View 2 Replies View Related

Belkin Routers :: N750 - Access Point Support Of Guest Access

Jan 9, 2013

Does the N750 (F9K1103V1) support Guest Access while in Access Point mode? It will not provide an IP address when a guest attempts to connect.

View 20 Replies View Related

Belkin Routers :: F9K1102 V1 Guest Access While In Access Point Mode

Jan 17, 2013

I have an n600 ( F9K1102 v1 , firmware 1.00.09 ). My ISP provides my main router for my network, but I want to use the N600 as an access point, I have activated the "Use as Access Point" feature.Is it possible to still utilize the Guest Access feature in this case?

View 1 Replies View Related

Belkin Routers :: Using F5D7230-4 As Access Point?

Dec 20, 2012

Can I use my F5D7230-4 as an access point? I need to provide a hardwired ethernet connection to my A/V reciever but not have a wired port in the area of my house. I have an existing wireless router thru Century Link. Could I have the Belkin attach itself to the wireless network and then have a cat 5 come out of one of the four ports to connect my A/V reciever to the network?

View 1 Replies View Related

Belkin Routers :: 5FD8235-4 V2 - Access Point Setup

Feb 2, 2013

If I want to setup my N+ router 5FD8235-4 V 2 as an access point. How do I go about doing that?

View 5 Replies View Related

Belkin Routers :: F9K1102 V3 Access Point IP Error

Mar 23, 2013

When I set up the Belkin F9K1102 as an access point I can no longer access it via the ip-address and it does not accept the new ip-address I've given it, but takes the ip-address 192.168.2.254, while my network is on the 192.168.1.XXX address series. The only way I can do this is by manually given the router a new address, then manually turn of the DHCP- server and finally move the internet cable from the WAN port to one of the LAN ports - but then the LED-indicator on the router is blinkin red.

View 2 Replies View Related

Belkin Routers :: N600 - Access Point Addition

Dec 28, 2012

I have a Belkin Play N600 as my primary and have an older Belkin G+MiMO that I'd like to connect as an access point only. Any step by step instructions of how to accomplish this?

View 1 Replies View Related

Belkin Routers :: Setting Up Max N300 As Access Point With USB Drive

Dec 17, 2012

I wanted to set Belkin Share Max n300 as an access point. I followed the instructions, set the IP address to the suggested one and connected it to the main router. It worked, computer connected to the Belkin via wire was getting IP address from DHCP on main router. But: The Belkin device itself became invisible. I lost connection to Belkin device via config page via HTTP. It does not respond to any IP address so I actually cannot use it for purpose I wanted to set up secondary Wi-fi, I just cannot configure it. Also I wanted to use USB ports of the Belkin to connect external drives. I cannot do it as well. More over it does not go back. It does not reset to the original router option.

View 2 Replies View Related

Belkin Routers :: Configure N300 As Access Point - Unidentified Network?

Nov 9, 2012

As per settings menu, I tried to give it an IP address but the new address is not accessible for further configuration. When I connected to the router it status changes to "unidentified network".

My primary network address range is 192.168.1.1 to 192.168.1.10. So I gave address to belkin as 192.168.1.100. But I can not access this address from both primary and belkin network.

View 2 Replies View Related

Belkin Routers :: N300 Wireless Bridges Be Connected To Same Access Point

Nov 21, 2012

Can 2 N300 wireless bridges be connected to the same wireless access point ?

View 1 Replies View Related

Belkin Routers :: N600DB Using Router As Access Point / Range Extender

May 16, 2013

I have a N600DB configured as a primary router. I got another playmax n600HD router which I want to configure as an access point that extends my network upstairs and allows me to attach some wired devices like my ps3. I followed the basic principles of setting as access point and my locally connected ps3 and NAS are communicating but no Internet access. How the 2nd router can connect to the internet?

View 2 Replies View Related

Linksys Access Point :: Configuring WAP54G V3.1 Without CD?

Nov 14, 2011

how to set up a WAP54G v3.1 Access Point if you've misplaced the CD?

View 5 Replies View Related

D-Link DIR-655 :: Configuring It As Secondary Access Point?

Sep 15, 2009

I have a DLG-4500 router as my primary router and want to connect a second router (DIR-655) to it as an extention of the LAN to the second floor of my home. I have found instructions on doing this with most other routers, but not DLINK.  In fact when doing the initial configuration and trying to disable the WAN link on the second router by using a bogus IP address string (127.0.0.1) The router won't let me save the change?  What are the steps for configuring a secondary router cascaded to the primary (both wireless) to extend network coverage.

View 13 Replies View Related

Linksys Cable / DSL :: Configuring WAG120N Like Access Point?

May 17, 2010

i have a router to connect on Internet, i need it because it let me use VOIP. I want to use WAG120N like Access Point Wireless because my VOIP router is not wireless.
 
How i have to configure it? What kind of incapsulation i have to use? VOIP router IP: 192.168.1.1
 
If is it possible (and if it is useful) i would to configure WAG120N with 2 IP, first one: 192.168.1.101 (to communicate with VOIP router and to let me go on internet) second one: 192.168.0.1 (to let me have control on it's configuration)
 
My devices will connect to 192.168.0.0 network

View 9 Replies View Related

Linksys Access Point :: Configuring WAP54G As A Router?

Mar 26, 2012

We have network that uses a Cisco router and use a WAP54G to access the network wirelessly.
 
We use static IP address so if someone wants to use the wireless an IP address has to be assigned to it and be manually configured for IP Address, Gateway, Sub Net Mask and DNS.
 
This is becoming unwieldly, but it is safe.  Is there any way to config the WAP54G as a router that would automatically assign an IP address in a range just for wireless devices.
 
Therefore the wireless devices could be set up as DHCP and we would use WPA/WPA2 encryption with a passkey, instead of just assigning static IP addresses.

View 1 Replies View Related

Cisco :: Configuring Aironet 1100 Access Point?

Dec 22, 2011

I have dozens of Cisco Aironet 1100 access points, each is managing its own wi-fi with DHCP. I had to disable dhcp on them because they are on a wired subnet where I am using the static IPs and don't want my wired clients to get DHCP addresses, nor someone to be able to plug the wire into own laptop and get on the network. It's been working fine with one exception - I need to be able to ping my access points from the central site, and I can't. What IOS command would enable ICMP echo on my access points in this case?

View 8 Replies View Related

Linksys Access Point :: WAP2000 - Configuring 3 SSIDs

Mar 21, 2011

I have a rental property with 3 apartments that are sharing the same internet connection. The users are consistantly downloading more than their monthly allowance, and I would like to monitor how much data each apartment's users are downloading.My plan is to purchase a Cisco WAP2000 Access Point and configure 3 SSIDs (one for each apartment). I havent decided if each SSID is to be setup on it's own VLAN.
 
Will I be able to use SNMP to monitor the data that each SSID has downloaded each month? I am happy to use a network management software package (such as PRTG from Paessler) for the actual monitoring itself, but I just need to know if the SNMP in the WAP2000 Access Point will provide the information to begin with.

View 1 Replies View Related

Cisco :: Configuring 1200 Access Point / Vlans

May 29, 2012

I has 4 VLANs and I want a MAC address has access to a VLAN, but not to another.
 
I used ACLs, but this will block the access to the access point, How to get the mac address will have access to a VLAN, eg no other Vlan? I has 4 VLANs and I want a MAC address has access to a VLAN, but not to another.
 
I used ACLs, but this will block the access to the access point, How to get the mac address will have access to a VLAN, eg no other Vlan?

View 6 Replies View Related

Cisco Wireless :: Configuring Access Point Of 1200 Series?

Apr 19, 2012

I recently purchased a Ciso 1200 Series WAP and I want to bridge this to my existing Cisco Wireless Router So I can extend my coverage. I have done some research but keep coming up short as to where I need to start. Note*(I do not want a physical connection to the WAP, I simply want to be able to bridge the connection from my existing Wireless router to my WAP.

View 1 Replies View Related

Linksys Access Point :: Configuring WAP54G With Existing Netgear Wireless?

Apr 26, 2013

Having some problems connecting up my "new" AP My current set-up consists of a Netgear "Virgin Superhub" cable modem/wireless router, a ZyXEL WRE2205 (repeater) in the hall on the first floor, and Ethernet connections through to a number of rooms, including the loft. I can't get wireless access in the loft, and I want to put the AP up there, connected through Ethernet. I want to use the same SSID and security for the AP as on the router and repeater so I can roam around(!) That's possible isn't it?What I've done so far (which hasn't worked) is connected via laptop to AP, set AP into AP mode(!), set the AP to dynamic IP, set the SSID / security the same as the router/repeater, plugged the AP into the Ethernet and tried to connect.

View 7 Replies View Related

Linksys Wireless Router :: E2000 - Configuring Second One As Repeater Access Point

May 28, 2011

I just purchased 2 E2000 routers at BB and was assured the second one could be configured as a repeater access point. Some current messages indicate this is not possible.Will a Cisco moderator please confirm and clarify repeater options.

View 2 Replies View Related

Cisco Wireless :: Configuring Root Access Point And Repeater In 1252-AG-A-K9?

Dec 19, 2011

how to configure Cisco 1252-AG-A-K9 Access Point Root and Repeater?

View 9 Replies View Related

Home Network :: Configuring Access Point Tplink TL-wa5110G With Wireless Router?

Jan 3, 2013

I have a tplink acess point TL-wa5110G . I have WISP ( wireless internet service provider). I have configured the acess point on wisp client router mode and wan type to pppoe gave the username and pwd..Now i want to share internet wirelessly. now my question is that can i connect the aces point to wan port of the wirless router to share internet wirlessly? Because i have seen the instruction figure in tplink access router where they have shown that u can connect it with with unmanage able switch to share it to wired lan.i want to ask can wirless works to share internet if i use wireless router to access point.

View 1 Replies View Related

Cisco Wireless :: Configuring DHCP Reply-agent On 1142N Access Point

Feb 27, 2012

configuring DHCP on access point, i have cisco 1142N access point, in my network.. working in autonomous mode, i have assigned a static ip to access point with default gateway.. from AP i'm able to reach internet and user connecting to access point are not able to get ip.. i have DHCP server in my network. how to make access point to fetch ip from my dhcp server and assign the saem to client.

View 10 Replies View Related

Set Up An Access Point On Belkin N600?

Jun 27, 2011

I recently purchased a new Belkin Play Max N600 HD, much different to my old Billion 5100. I'm only on an ADSL connection but will be upgrading to ADSL2 soon.

Anyway I have a Netgear WG602 v3 Wireless Access Point, and I was wondering am I able to put this somewhere else in the house and have it relay the internet connection to my devices (iPhone for example).

I'm in the User Interface of my Belkin Device but I have no clue how to actually set up this Netgear device to act as an AP. I've changed one thing on the Belkin device, not sure if it'll make any difference. I changed the Wireless Band from 2.4Ghz to 5Ghz hoping that it'll strengthen the signal. I've attached a print screen of how the User Interface looks like in case any of the knowing would need some guide to where things are placed. =/

EDIT: Also whenever I'm downloading it's a bit slow. I don't have the fastest internet only 1.5Mbps (150kb/s) but now I'm downloading at about 50kb, and from my computer at about 70kb. =/ These are at separate times.

View 8 Replies View Related

Belkin Router As Access Point

Sep 17, 2012

I am using a Verizon Fios system at home. I have a desktop pc on the other side of the house from my modem that does not have wireless capabilities. I read that I can use an access point to connect it to my wireless network. I'm not sure if this is true or not. I set up my Belkin N150 basic router as directed to make it an access point. I connected it to my desktop pc on the other side of the house and it does not work. 1. Can this set up work? 2. If so, what do I need to do to get connected? Currently the pc is not even recognizing the router/access pt.

View 7 Replies View Related

Belkin N750 - Find IP Of Access Point?

Jun 28, 2013

I have a home network, using Belkin N750 as main router and wired ASUS RT-N12C1 which was set as AP mode. How can I find the IP of ASUS RT-N12C1 to change channel?

View 4 Replies View Related

F5D7231-4 - Setting Up A Belkin Router As An Access Point

Aug 3, 2011

I have a Belkin High-Speed Mode Wireless G Router F5D7231-4 and I wish to use it as an access point for my main desktop for my wireless network.

I have followed methods supplied by both Belkin and users and have had no success.

Instructions followed:

- Connect a computer to Belkin router using an ethernet cable.

- Reset the router to factory defaults. The reset button can be found at the botton of it. The reset procedure is given below

- Make sure the router is switched ON.

- Locate the reset button(inside a hole) at the back of the router.

- Use a paper clip, push the reset button and hold it for 30 seconds then release the reset button.

- Unplug the Power cable from back of the router and plug it back again and wait for another 30 seconds.

- Log on to router setup page by typing 192.168.2.1 in the address bar of the browser.

- On the left under wireless click on the option Use as Access Point.

- Select Enable and specify the IP address as 192.168.2.254 and subnet mask as 255.255.255.0 and click on apply changes.

Every time the system crashes whilst applying the changes.

View 4 Replies View Related

Belkin F5D7132 Range Extender / Access Point

Jan 16, 2013

I have a Belkin F5D7132 Range extender/access point set up as a repeater for my wireless router as its range isn't adequate but this doesn't provide enough wifi signal strength. Can I set my Belkin device as an access point connected by Ethernet to the router?

View 1 Replies View Related

Set Up A Belkin F5d7230-4 6000 Router As A Wifi Access Point

Oct 28, 2012

how to set up a Belkin F5D7230-4 6000 router as a wifi access point. My home set up is the following: Dell Desktop connected by Lan to a Telefonica/Movistar router (I live in Spain), Dell portable .. connected by wifi at the other end of the house ..saying it's portable is a bit of a joke .. it's old and moving it is not an option ! Problem is I don't get much wifi signal on the portable to be able to do anything at all online so after googling on how to increase wifi signal .. worked out that I could set up an access point.. and owning a belkin router have been trying to set it up although I think there is something

I've connected the belkin by cable to the portable and disabled the DCHP and clicked on set up as an access point, set up wifi security and password, but when i am trying to reset the IP address I end up having to reset the router and start all over again.

View 9 Replies View Related

Can't Get Belkin N600db To Detect F5d9231 (access Point Mode)

Oct 11, 2011

I assigned the access point a static IP 192.168.2.50 within the router IP range. My computer wireless card is detecting the access point but I can't get the belkin n600db to detect the access point.

View 12 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved