Can I use my F5D7230-4 as an access point? I need to provide a hardwired ethernet connection to my A/V reciever but not have a wired port in the area of my house. I have an existing wireless router thru Century Link. Could I have the Belkin attach itself to the wireless network and then have a cat 5 come out of one of the four ports to connect my A/V reciever to the network?
View 1 Replieshow to set up a Belkin F5D7230-4 6000 router as a wifi access point. My home set up is the following: Dell Desktop connected by Lan to a Telefonica/Movistar router (I live in Spain), Dell portable .. connected by wifi at the other end of the house ..saying it's portable is a bit of a joke .. it's old and moving it is not an option ! Problem is I don't get much wifi signal on the portable to be able to do anything at all online so after googling on how to increase wifi signal .. worked out that I could set up an access point.. and owning a belkin router have been trying to set it up although I think there is something
I've connected the belkin by cable to the portable and disabled the DCHP and clicked on set up as an access point, set up wifi security and password, but when i am trying to reset the IP address I end up having to reset the router and start all over again.
belkin wireles g router F5D7230 4 v2000 need driver i lost setup cd
View 1 Replies View RelatedI have a Belkin G router F5D7230-4 (firmware version 8.01.07) and am trying to view stats on what is using our connection.We have a very low capacity, rural wireless broadband that our ISP tells us is maxed out all the time, even when we don't appear to be using any devices, so I'd like to view the traffic on our DHCP client list to see which device is using an excessive amount of bandwith and put a limit on its access.I don't see a statistics tab on the setup page, is there another place to look or does Belkin have an external program to do this?
View 1 Replies View RelatedI have two BELKIN f5d7230-4 wireless router my goal is to connect the two wirelessly and share the internet connection.
View 2 Replies View RelatedHow do I retrieve my Belkin network password for model F5D7230-4 version 7000?
View 1 Replies View RelatedI'm using a wireless g router (f5d7230-4) which for most purposes is fine? Specifically: 1. I can't seem to stream media content from my windows 7 pc to my lg tv (model 55 lw 6500), and wonder if the age of the router is part of the problem; 2. some iptv channels on my ps3 are slow to load menus, though programs run fine when I push play (I gather ps3 is restricted to wireless g but if I upgraded the router I would plug in the ps3 using cat6). When I speed test my internet connection I'll typically get results around 2.5-5 Mbps. I'm impressed that a router of this age performs so well it isn't obvious to me that upgrading will improve the setup.
View 1 Replies View RelatedI am trying to use f5d7230-4 v6000 to connect my TV and Playstation to my home WLAN, but cannot set up the router to receive the signal from the base station (FRITZ!Box). Is it possible at all to use f5d7230-4 v6000 for such function?
View 2 Replies View RelatedI am running "PLEX Media server" on a PC and have a "Roku" client working perfectly on my home network
I am trying to use the "My PLEX" feature of "PLEX" to stream my content to the internet and access it on a Nook or iPod from any internet hot spot. This requires that the router supports DLNA. I am not sure what this is and am not successful at this so far.
Although it may sound like I know what I'm talking about I am at my limit and do not know how to determine if my router will support DLNA.
Is it time to get a new router or is there something I need to do to the router so it supports DLNA?
Setup N600 DB as an access point using the most recent firmware,3.03.12? Once I do I'm not able to access the dashboard even through I enabled the remote management option.
View 2 Replies View RelatedDoes the N750 (F9K1103V1) support Guest Access while in Access Point mode? It will not provide an IP address when a guest attempts to connect.
View 20 Replies View RelatedI have an n600 ( F9K1102 v1 , firmware 1.00.09 ). My ISP provides my main router for my network, but I want to use the N600 as an access point, I have activated the "Use as Access Point" feature.Is it possible to still utilize the Guest Access feature in this case?
View 1 Replies View RelatedIf I want to setup my N+ router 5FD8235-4 V 2 as an access point. How do I go about doing that?
View 5 Replies View RelatedWhen I set up the Belkin F9K1102 as an access point I can no longer access it via the ip-address and it does not accept the new ip-address I've given it, but takes the ip-address 192.168.2.254, while my network is on the 192.168.1.XXX address series. The only way I can do this is by manually given the router a new address, then manually turn of the DHCP- server and finally move the internet cable from the WAN port to one of the LAN ports - but then the LED-indicator on the router is blinkin red.
View 2 Replies View RelatedI have a Belkin Play N600 as my primary and have an older Belkin G+MiMO that I'd like to connect as an access point only. Any step by step instructions of how to accomplish this?
View 1 Replies View RelatedI am trying to configure an older Belkin Router (Model Number 5FD8230-4) as an Access Point so that I can boost the range of my network. The problem I have is in configuring the old router. It won't allow me to change any settings, or at least the changes don't stick, even after clicking "apply changes". I tried creating an administrative password but I am not even sure that this is working. I am using a Macbook, so perhaps this is an Apple compatibility issue. I have tried resetting the router and reverting to Factory default settings, but no joy.
View 3 Replies View RelatedI wanted to set Belkin Share Max n300 as an access point. I followed the instructions, set the IP address to the suggested one and connected it to the main router. It worked, computer connected to the Belkin via wire was getting IP address from DHCP on main router. But: The Belkin device itself became invisible. I lost connection to Belkin device via config page via HTTP. It does not respond to any IP address so I actually cannot use it for purpose I wanted to set up secondary Wi-fi, I just cannot configure it. Also I wanted to use USB ports of the Belkin to connect external drives. I cannot do it as well. More over it does not go back. It does not reset to the original router option.
View 2 Replies View RelatedAs per settings menu, I tried to give it an IP address but the new address is not accessible for further configuration. When I connected to the router it status changes to "unidentified network".
My primary network address range is 192.168.1.1 to 192.168.1.10. So I gave address to belkin as 192.168.1.100. But I can not access this address from both primary and belkin network.
Can 2 N300 wireless bridges be connected to the same wireless access point ?
View 1 Replies View RelatedI have a N600DB configured as a primary router. I got another playmax n600HD router which I want to configure as an access point that extends my network upstairs and allows me to attach some wired devices like my ps3. I followed the basic principles of setting as access point and my locally connected ps3 and NAS are communicating but no Internet access. How the 2nd router can connect to the internet?
View 2 Replies View RelatedIm trying to setup my wireless router I've had for a while to have a password.It has been unsecured since I've had it.I have the manual but not the install wizard.I tried probably a hundred times but cant seen to get it right.The model is F5D7230-4.I called the support number. The router works excellent but I just cant get the security password to setup.I reset it a few times and tried and tried with user manual directions
View 1 Replies View RelatedIs there any way to clear the archived DHCP list on the Belkin F5D7230-4 wireless router? Over the years there have been a lot of connections, most are no longer around but the Belkin holds on to the list. I can find no way to clear it to get it back to what is currently connected. I have tried a soft reboot, unplugging power etc but it seems like I will have to do a factory reset and apart from not being able to find my ADSL login details, I would have to reset all my settings.
View 2 Replies View RelatedI have done all the resets, factory resets, hard resets, and any other names. When I attempt to enter any sort of IP addresses,default Belkins and ones I see when viewing ipconfig, all it does is perform a Google Search with the numbers.Again, turning on wireless on my laptop and phone fail to find my router, which used to just be called "Belkin".Here is all the info that I believe you need:
IP- Comcast
Modem-Cisco DPC3008
Router - Belkin F5d7230-4 V1444 (althought a little old, have never had major issues untill a couple days ago)
Windows IP Configuration
Host Name . . . . . . . . . . . . : JBerman-Win7
Primary Dns Suffix . . . . . . . : mmreibc.prv
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
I recently purchased a new Belkin Play Max N600 HD, much different to my old Billion 5100. I'm only on an ADSL connection but will be upgrading to ADSL2 soon.
Anyway I have a Netgear WG602 v3 Wireless Access Point, and I was wondering am I able to put this somewhere else in the house and have it relay the internet connection to my devices (iPhone for example).
I'm in the User Interface of my Belkin Device but I have no clue how to actually set up this Netgear device to act as an AP. I've changed one thing on the Belkin device, not sure if it'll make any difference. I changed the Wireless Band from 2.4Ghz to 5Ghz hoping that it'll strengthen the signal. I've attached a print screen of how the User Interface looks like in case any of the knowing would need some guide to where things are placed. =/
EDIT: Also whenever I'm downloading it's a bit slow. I don't have the fastest internet only 1.5Mbps (150kb/s) but now I'm downloading at about 50kb, and from my computer at about 70kb. =/ These are at separate times.
I am using a Verizon Fios system at home. I have a desktop pc on the other side of the house from my modem that does not have wireless capabilities. I read that I can use an access point to connect it to my wireless network. I'm not sure if this is true or not. I set up my Belkin N150 basic router as directed to make it an access point. I connected it to my desktop pc on the other side of the house and it does not work. 1. Can this set up work? 2. If so, what do I need to do to get connected? Currently the pc is not even recognizing the router/access pt.
View 7 Replies View RelatedI have a home network, using Belkin N750 as main router and wired ASUS RT-N12C1 which was set as AP mode. How can I find the IP of ASUS RT-N12C1 to change channel?
View 4 Replies View RelatedI have a Belkin High-Speed Mode Wireless G Router F5D7231-4 and I wish to use it as an access point for my main desktop for my wireless network.
I have followed methods supplied by both Belkin and users and have had no success.
Instructions followed:
- Connect a computer to Belkin router using an ethernet cable.
- Reset the router to factory defaults. The reset button can be found at the botton of it. The reset procedure is given below
- Make sure the router is switched ON.
- Locate the reset button(inside a hole) at the back of the router.
- Use a paper clip, push the reset button and hold it for 30 seconds then release the reset button.
- Unplug the Power cable from back of the router and plug it back again and wait for another 30 seconds.
- Log on to router setup page by typing 192.168.2.1 in the address bar of the browser.
- On the left under wireless click on the option Use as Access Point.
- Select Enable and specify the IP address as 192.168.2.254 and subnet mask as 255.255.255.0 and click on apply changes.
Every time the system crashes whilst applying the changes.
I have a Belkin F5D7132 Range extender/access point set up as a repeater for my wireless router as its range isn't adequate but this doesn't provide enough wifi signal strength. Can I set my Belkin device as an access point connected by Ethernet to the router?
View 1 Replies View RelatedI assigned the access point a static IP 192.168.2.50 within the router IP range. My computer wireless card is detecting the access point but I can't get the belkin n600db to detect the access point.
View 12 Replies View Relatedhave netgear pcmcia card need to connect to new belkin wireless access point.
View 1 Replies View RelatedI am trying to find an effective way to extend the wireless signal across our home. I have tried various different solutions. Currently, I have an e4200 primary router that is cascaded with two additional e1500 routers that have been configured as access points. The Linksys support team hosted my computer and configured the devices. The e1500 routers are connected via ethernet wires running through the walls. And, this seems to be working well. Here's my question. The e1500 routers are configured with different SSID names, which Linksys advised was required to avoid conflicts in communications from the three router devices. Is there any way to configure this set up or something similar so that the entire wireless network has the same SSID and is seamless. In the current configuration, I have to specifically connect to the primary router or one of the two access points.
View 3 Replies View RelatedI need to know if 3502p with outdoor antennas supports Point-to-Point Wireless Bridging?
View 6 Replies View RelatedHow would I bridge a wireless connection with a distance of 400 feet? Would twoAP1262N-A-K9 be able to make this happen? Or is there another wireless bridge that you all can think of?I would be connecting one AP1262 of off a 3750g switch and at the far end (400 ft aproximately) another AP1262N-A-K9.
View 12 Replies View Related