Belkin F5D7230-4 How To Clear Dhcp List

Feb 8, 2011

Is there any way to clear the archived DHCP list on the Belkin F5D7230-4 wireless router? Over the years there have been a lot of connections, most are no longer around but the Belkin holds on to the list. I can find no way to clear it to get it back to what is currently connected. I have tried a soft reboot, unplugging power etc but it seems like I will have to do a factory reset and apart from not being able to find my ADSL login details, I would have to reset all my settings.

View 2 Replies


ADVERTISEMENT

Belkin Routers :: F5D8236-4 V2 - DHCP Client List Is Not Showing All IP Addresses In Use

Feb 23, 2013

I have a Wireless N router model F5D8236-4 v2 (01) with firmware 2.00.04 (Nov 12 2008 10:51:08) and it's not showing all issued wireless or Wired IP addresses in DHCP Client List.

They all have IP addresses and connect to the internet through the router, but in the router administration page, they're not listing. The Windows devices all show but most of the Mac devices are not, nor is my XBox 360.

My reason for investigating this is because the router seems to keep losing the Mac devices and a router reboot fixes it, but it shouldn't have this problem because all the Windows devices just seem to work.

According to the support page I have the latest available (dated November 12, 2008 which really seems kinda old to me for a Wireless N router). Are there any plans for a new firmware offering for this modem or have you already deprecated it as "legacy equipment"?

View 1 Replies View Related

Belkin F5d7230-4 Setting Password?

Jan 28, 2013

Im trying to setup my wireless router I've had for a while to have a password.It has been unsecured since I've had it.I have the manual but not the install wizard.I tried probably a hundred times but cant seen to get it right.The model is F5D7230-4.I called the support number. The router works excellent but I just cant get the security password to setup.I reset it a few times and tried and tried with user manual directions

View 1 Replies View Related

Belkin Routers :: Using F5D7230-4 As Access Point?

Dec 20, 2012

Can I use my F5D7230-4 as an access point? I need to provide a hardwired ethernet connection to my A/V reciever but not have a wired port in the area of my house. I have an existing wireless router thru Century Link. Could I have the Belkin attach itself to the wireless network and then have a cat 5 come out of one of the four ports to connect my A/V reciever to the network?

View 1 Replies View Related

Belkin Routers :: Driver For Wireless G F5D7230 4 V2000?

Feb 9, 2013

belkin wireles g router F5D7230 4 v2000 need driver i lost setup cd

View 1 Replies View Related

Belkin Routers :: F5D7230-4 How To View / Monitor Traffic

Jan 6, 2013

I have a Belkin G router F5D7230-4 (firmware version 8.01.07) and am trying to view stats on what is using our connection.We have a very low capacity, rural wireless broadband that our ISP tells us is maxed out all the time, even when we don't appear to be using any devices, so I'd like to view the traffic on our DHCP client list to see which device is using an excessive amount of bandwith and put a limit on its access.I don't see a statistics tab on the setup page, is there another place to look or does Belkin have an external program to do this?

View 1 Replies View Related

Set Up A Belkin F5d7230-4 6000 Router As A Wifi Access Point

Oct 28, 2012

how to set up a Belkin F5D7230-4 6000 router as a wifi access point. My home set up is the following: Dell Desktop connected by Lan to a Telefonica/Movistar router (I live in Spain), Dell portable .. connected by wifi at the other end of the house ..saying it's portable is a bit of a joke .. it's old and moving it is not an option ! Problem is I don't get much wifi signal on the portable to be able to do anything at all online so after googling on how to increase wifi signal .. worked out that I could set up an access point.. and owning a belkin router have been trying to set it up although I think there is something

I've connected the belkin by cable to the portable and disabled the DCHP and clicked on set up as an access point, set up wifi security and password, but when i am trying to reset the IP address I end up having to reset the router and start all over again.

View 9 Replies View Related

Connecting 2 Belkin F5d7230-4 Wireless Routers And Share Internet?

Mar 1, 2011

I have two BELKIN f5d7230-4 wireless router my goal is to connect the two wirelessly and share the internet connection.

View 2 Replies View Related

Belkin Routers :: How To Retrieve Network Password For Model F5D7230-4

Oct 21, 2012

How do I retrieve my Belkin network password for model F5D7230-4 version 7000?

View 1 Replies View Related

Belkin Routers :: F5d7230-4 / Would Updating Wireless G Improve Performance

Jan 29, 2013

I'm using a wireless g router (f5d7230-4) which for most purposes is fine? Specifically: 1. I can't seem to stream media content from my windows 7 pc to my lg tv (model 55 lw 6500), and wonder if the age of the router is part of the problem; 2. some iptv channels on my ps3 are slow to load menus, though programs run fine when I push play (I gather ps3 is restricted to wireless g but if I upgraded the router I would plug in the ps3 using cat6). When I speed test my internet connection I'll typically get results around 2.5-5 Mbps. I'm impressed that a router of this age performs so well it isn't obvious to me that upgrading will improve the setup.

View 1 Replies View Related

Belkin Routers :: Create Bridging Connection With F5d7230-4 V6000 As Repeater?

Mar 16, 2013

I am trying to use f5d7230-4 v6000 to connect my TV and Playstation to my home WLAN, but cannot set up the router to receive the signal from the base station (FRITZ!Box). Is it possible at all to use f5d7230-4 v6000 for such function?

View 2 Replies View Related

Belkin Routers :: Determine If F5D7230-4 Ver1 Supports DLNA Server?

May 25, 2013

I am running "PLEX Media server" on a PC and have a "Roku" client working perfectly on my home network

I am trying to use the "My PLEX" feature of "PLEX" to stream my content to the internet and access it on a Nook or iPod from any internet hot spot. This requires that the router supports DLNA. I am not sure what this is and am not successful at this so far.

Although it may sound like I know what I'm talking about I am at my limit and do not know how to determine if my router will support DLNA.

Is it time to get a new router or is there something I need to do to the router so it supports DLNA?

View 1 Replies View Related

Protocols / Routing :: Belkin F5d7230-4 V1444 Router Lost Wireless Function

Sep 10, 2012

I have done all the resets, factory resets, hard resets, and any other names. When I attempt to enter any sort of IP addresses,default Belkins and ones I see when viewing ipconfig, all it does is perform a Google Search with the numbers.Again, turning on wireless on my laptop and phone fail to find my router, which used to just be called "Belkin".Here is all the info that I believe you need:

IP- Comcast
Modem-Cisco DPC3008
Router - Belkin F5d7230-4 V1444 (althought a little old, have never had major issues untill a couple days ago)

Windows IP Configuration
Host Name . . . . . . . . . . . . : JBerman-Win7
Primary Dns Suffix . . . . . . . : mmreibc.prv
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No

[code]....

View 19 Replies View Related

Linksys Wireless Router :: Clear Device List On EA2700

Aug 8, 2012

I have a cisco EA2700. How to clear the connected devices list?I want to use the parental controls, but when I look at the list it shows every device that was ever connected to my wireless.

View 2 Replies View Related

Setting Up Belkin Router Wireless With Clear Modem?

May 1, 2012

I have a CLEAR modem want to know how to setup my Belkin router so I surf the internet for my laptop and tablet pc. The subsection is the router.

View 1 Replies View Related

Cisco WAN :: 3750 Switch - Clear IP DHCP Conflict / Binding

May 10, 2013

I configured an DHCP server on cisco 3750 switch . Wher in w3750 gets connected to plain l2 switch 2960 on floor  and machine gets connected to 2960 port. [code] Below is the description of problem:
 
-> The Cisco 3750 switch is the DHCP server. VLAN 108 is named as internet vlan.
 
-> Ports in Cisco 2960 switch has been configured with "switchport access vlan 108".
 
-> There were no problems at all and everything had been working smoothly.
 
-> 3 days back, users started complaining that they couldn't access the internet. Up on troubleshooting the issue, I found out that there was an issue with the DHCP server as the computer couldn't get any IP address at all. After setting static IP address, the internet started working again.
 
If I bind IP to MAc address reservation on core 3750 switch for some time of moment it works but after that machine gets unreachable .I restarted the 3750 switch and also all the 2960 switches over the weekend, however, the issue still hasn't been resolved yet. I did issue the command "clear ip dhcp conflict *", clear ip dhcp binding * but no joy at all.

View 2 Replies View Related

Cisco Wireless :: Clear DHCP Lease In WLC Internal Server WLC 6.0.199

Jan 12, 2012

How to clear dhcp lease in WLC 6.0.199 from the IP leased from internal server?

View 1 Replies View Related

Computer Not Showing Up In DHCP Client List?

Feb 9, 2011

I just started having this problem yesterday. I was experiencing weird downloading/internet browsing issues and couldn't figure out what the problem was. I started looking around my router settings and noticed that in my DHCP Client list, my computer isn't in it. The router is hooked up to the computer, so it's not wireless. My phone and my girlfriend's laptop are listed, but the main computer isn't. It's especially causing problems with port forwarding. Downloads will stop because the port isn't showing as open. I'm running 64 bit Windows 7 and a Belkin N+ Wireless Router, model F5D8235-4.Firmware is up to date.

View 6 Replies View Related

D-Link DIR-825 :: DHCP Reservations List Limit?

Nov 23, 2010

Why is the DHCP Reservations List limited to 25 entries?  Is there a beta firmware version that allows more?

View 5 Replies View Related

D-Link DIR-615 :: Formation Regarding DHCP Reservations List?

Jan 2, 2012

I have a DIR-615 router running FW version 3.01 with Hardware Version: C1 , my xbox is wired to my router. When I port forwarded, i had an strict nat, but had the best connection, but not by very much. When i put DMZ on, i had a strict nat, and the connection to other people was a bit better then UPnP.When i had UPnP on i had a open nat, i could barely be able to connect to anyone.what is a DHCP Reservations List?

View 3 Replies View Related

D-Link DIR-655 :: Can't Find Computer In DHCP List

Apr 19, 2011

i had the dir-655 with desktops and laptops running with xp and win 7, also some other devices such as ipod, iphone, ps3, xbox, problem occura with conflict of network ip address, i think xp and win 7 both login with the same network ip address.  So I start to disconnect every device and try to connect each desktop and laptops, one by one, enabled the DHCP and reserve the network ip to avoid conflict.  But here's the problem, when I connect the first computer with wired to the dir-655, can't find the computer in the DHCP list so I cannot do the reserve, I'm able to surf internet even I can see info with ipconfig.  So I connected 1 wired and 2 wifi to the network, only 1 wifi network ip showing on the list, so I reserve that one, but after I refresh, the DHCP list is empty.

View 1 Replies View Related

D-Link DIR-825 :: Sometimes Shows A DHCP Reservation List

Mar 5, 2012

Ever since I updated my firmware to 1.01 my web interface for the network settings screen has been random. Somtimes it shows a DHCP reservation list, sometimes it doesn't. Sometimes there are reservations, sometimes there are selectable radio buttons.  I guess I'm just trying to figure out if this is a firmware issue or not. Ever since I updated the firmware it has been flakey.... But I was having issues with other stuff before that. When there are no reservations, sometimes i can't even select any computers because there aren't any in the drop down, when all of my hardware is online?

View 6 Replies View Related

D-Link DIR-825 :: DGL-4500 MAC Address In DHCP Reservations List

Jan 13, 2010

I have a setup using LogMeIn Hamachi and the network type creates a Windows Bridge. I also use the DHCP Reservations List to assign the same IP to specific devices. Well I have the MAC Address for my NIC in the list which works when I am not using the bridge. When using the bridge, of course the MAC address changes and when I try to add it to the list I get the following message in a popup window. The MAC Address is 02:e0:61:05:45:3e I have tried manually entering it, letting the router enter it from the list of computers and just to rule out something stupid, I have tried changing the letters to upper case and removing the colons.

Another issue I can see when this issue is resolved is that I do not believe it will let me add this reservation since I will be using the same IP used by another reservation. My DGL-4500 allowed this if I had the other reservations using the same IP disabled.Below these comments/rants are some feature requests. I have put them last as some of the requests are explained in the comment/rant section.I have read through this list and I have to say that after I purchased the router, which I ordered on-line, I was dreading it, but I have not had issues. It is possible that I am not using features that cause this issue. I believe the issues occur when using certain configurations with the "Enable Advanced DNS Service" enabled. I am not using this service. Since I knew people were having issue s with it, I wanted to see my results leaving that out. I have had this router running since a week before Christmas and I have many Virtual Server entires, QoS and port forwarding entries, https based remote administration, both 5GHz and 2.4GHz networks enabled supporting a/b/g/n(on both networks) and a guest network enabled on both bands all supporting WPA (TKIP and AES). I have 2 Giga wired connections that are always active, a 100Mb connection that is on an off but used almost daily, 2 Laptops that use the 2.4GHz network daily and one is 802.11g 54Mb and the other is 802.11n 150Mb and they are on at the same time almost daily, a printer that is on and used multiple times a week that uses 802.11g and a game system that uses 802.11a this device is used daily. Most devices are on and used at the same time daily and we have a good deal of regular Internet traffic and moderate other network traffic during these times. At night all computers are backed up over the network and most of the other network devices are off or not during this time. Other than having to reboot my Internet hardware provided by my ISP, I have not had issues. The router has been rebooted for config changes and I usually cycle it when I cycle the Internet hardware. Point is, so far no issues, good performance and it works and I have of course had other devices connected using the guest network and I have been testing features, performance, etc.

What's up with having so much variation in how features work across routers?e.g. My DHCP Reservation issue above. This router does not work with a setup like my DGL-4500.This router allows a preset amount of services like QoS and Virtual Server entries while the DGL-4500 just lets you add entries. Now maybe there is a limit and it just looks like there is no limit. Of course, there is at least a limit that is reached when you have used a certain amount of memory with the configuration.so many routers while leaving gaps and the lack of feature explanation and comparison?I switched to this router because I wanted a dual band setup which my DGL-4500 does not provide. That leads to the issue of the new way D-Link deals with dual-band. When I purchased the router it did not list that you had to choose 2.4GHz or 5GHz or it is not simultaneous dual-band. I was duped because I used to install DWL-7100AP for people that needed better wireless options for home businesses and small businesses and that provides simultaneous dual-band and back then if it was dual-band it was simultaneous. But I am disappointed in some of the features lost like WISH support and a few options here and there which do not seem like they are specific to gaming routers and this router is more on the mid range and low high range end of consumer, prosumer, home business and lower traffic small business routers, so why is it missing these features and why does it have the limitations I listed in the "variation in how features work" section above?

Other examples of lack of feature clarity are with Game Fuel, HD FUEL and Intelligent QoS. Isn't Game Fuel Intelligent QoS of some sort. Now from the example provided in the overview for the DGL-4500, Game Fuel optimizes game performance, but it does not say this is automatic or if it works along with the rules you set in the Game Fuel section which is the same as the QoS Engine section in the DIR-825. The difference is that the DIR-825 has a "Enable QoS Engine" option while the DGL-4500 has an "Enable Game Fuel" option. It seems that Intelligent QoS does what Game Fuel does, but expands that to VOIP, Media Streaming, etc. and it may be more automatic. HD Fuel in the only place I have seen it mentioned seems to refer to the combination of Intelligent QoS and the inclusion of 5GHz wireless support. Of course there is no version and feature documentation and in fact while the overview of the DIR-825 talks about gaming with Intelligent QoS, but if you bring up a comparison of routers, the chart has no in the gaming section for the DIR-825. I can't say I have noticed better or worse gaming performance with the DIR-825 compared with the DGL-4500, but given the shear lack of documentation on how to use Game Fuel and Intelligent QoS properly, who knows if I have this setup correctly. I will say the QoS Engine section in the DIR-825 is easier to use than the Game Fuel section in the DGL-4500.

1) The ability to reduce the brightness of the status lights, set them to solid if enabled with brightness options and to set them to off with an option to have some very faint light to show that the router is on. Of course I should be able to set different options to be applied at specific times.

2) Add the applicable features missing from the DIR-825 that are found in the DGL-4500 and applicable features from other routers. Also, get them all so they work the same on each router and let get the best from them all and make that the standard. e.g. In my DHCP reservation example above don't set the standard to the limitations of the DIR-825, but make the DGL-4500 function set or better function set of all routers combined for each feature the standard with-in router categories. e.g. the DIR-825, DGL-4500 and DIR-855 would be in the high end router category for consumer, prosumer, home business and lower traffic small business routers.

3) For DHCP reservations, you should not be limited to the DHCP IP Address Range.

4) On the log-in screen, get a better captcha and fix the tab order.

5) Add a log-out option in the web interface.

6) Allow for a next hop option in the DCHP server section. It would be cool, if there could be a list of IPs allows one to be enabled at a time.

7) Allow different DHCP server settings for each network. There are 5 on the DIR-825. Wired, 2.4GHz regular, 2.4GHz Guest, 5GHz regular and 5GHz Guest. Would be nice if you could set a couple of VLANs on the Ethernet ports and then have different DHCP setings for each VLAN.

For guest wireless networks, allow rules to be set to allow access to certain services on the network. E.g. I may want to allow printing. So allow a single port or multiple ports with easy settings for consecutive port ranges to be opened to an IP, IP range or all IPs and allow all ports for an IP or range of IPs. Of course, leave the allow full access option.

8a) Allow users to set rule sets that can be enabled/disabled like the full access option.

8b) Allow a control that can be set in the rule sets that controls if the wireless devices can talk to each other and another that controls if they can access devices on the wired network and another that controls if the wireless devices can access the Internet.

8c) Allow rules above to be limited to be applied to specific MAC Addresses.

8d) These options would be good to have for the non-guest wireless networks and wired network as well.

View 15 Replies View Related

Unknown IP Address Range On Router DHCP Client List

Nov 19, 2011

I keep getting some additional IP addresses logging onto my home network that have an address outside what should be allowed by the router. The server is running at 192.168.2.1 and is set to only allow clients from 192.168.2.2 - 192.168.2.10 so a total of 9 clients should be allowed on.The problem is that something keeps logging in with an address of 192.168.169.2 or 3 etc. Sometimes more than one device at a time.I have assumed that it is some automated or virtual client as I'm pretty certain my network has not been breached. I have a 9 character password with a relatively random alphanumeric combination, although I haven't tried changing the password (I live in a share house with with a bunch of devices using wireless, so I haven't yet bothered). What I don't understand is how it has connected with the xx.xx.169.xx range at all. I have a Belkin 'Share' Wireless N Modem Router and at some stage there was a 'guest' network but that has since been disabled and I still am seeing the extra address. I have attached a screen shot of the DHCP client list on the router.The following is a list of devices that may be on the network at times, I'm thinking one of these may be responsible for the problem:

Windows Vista Desktop - Only LAN device
PS3
Macbook
Epson wireless printer
Android HTC Desire Mobile Phone
Laptops running various Windows versions (XP, Vista and 7)

A few thoughts I had:

- the android phone is capable of running a wireless hotspot, may have to look into it to see if if has been operating as an access point into the Belkin router, but assumed this wouldn't bring up clients connected to the phone on the home router.

- The desktop has PS3 Media server installed to stream video to the PS3 over the network (not that I have ever managed to get it to work), however this is not ever open on the desktop.

View 10 Replies View Related

D-Link DIR-615 :: Hosts Specified In DHCP Reservations List Can Access Network?

May 1, 2011

1. To specify static IPs for components on my network, is it simply a matter of reserving each component in the DHCP Reservations List portion of the Network Settings page?

2. On the same page, in the DHCP Server Settings portion, if Enable DHCP Server : is deselected, does this mean that only the hosts specified in the DHCP Reservations List can access the network? In other words, is access now restricted to these entries?

3. If the DIR-615 is powered OFF, will the above settings, etc. be lost (similar to a reset)?

View 6 Replies View Related

Belkin Routers :: Way To Block A Specific List Of Sites With N750 DB Wireless

Dec 17, 2012

I have a Belkin N750 router which I purchased because the box said it had filtering options. I didn't realize that the filtering was only sites that Norton kept track of. There are certain adware sites I know about that I would like to filter. Possible with this router?

View 5 Replies View Related

Linksys Wireless Router :: Finding DHCP List In Admin For WRT160N?

Jan 5, 2012

I have the WRT160N router for 3.5 yrs and it's worked perfectly since installing it. About two weeks ago it began intermittently dropping cable connection. First few times I thought I could resolve it by unplugging/plugging router & modem so they can "re-syn" to the cable connection. That still works but now it occurs sometimes multiple times within a few minutes/hours and then won't happen again for an entire day/days. The other day I had connectivity but instead of the usual 5 bars I only had 3 while  using my laptop in the same spot in the house as usual.

View 5 Replies View Related

Linksys Wireless Router :: E2500 DHCP Client List Not Showing

Aug 25, 2011

I have purchased E2500 and i am having following problems:
 
1. DHCP client list not showing - only shows when i reboot the router. After some time, the list never shows even when i press refresh button
2. I can only reserve IP when i reboot the router - after some time i cannot do this action also
 
I have upgraded to latest firmware and also peformed reset as directed by support.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 - DHCP Client List Is Incorrect?

Dec 3, 2012

Region : France
Model : TD-W8968
Hardware Version : V1
Firmware Version : TD-W8968_V1_120926
ISP : SFR
Device in question: siemans C610 IP voip phone
Configuration:

* The C610 is directly connected to TD W8968 via the ethernet port number 3 >> ethernet port number 1 is connected to the devolo homeplug 200AVPLUS . The PC is at the other end of the homeplug network

* The DHCP address starts at 192.168.1.100 - 192.168.1.199.

Symptom:

1. It takes a long time (about 2-3 minutes) for the C610IP to obtain the IP address of 192.168.1.100 after the synchronisation of the ADSL line is finished 2. In the DHCP client list, I could only see the IP address of the PC (192.168.1.101) but not the C610 IP. However, if I type 192.168.1.100, I could access to the configuration page of the C610 IP. - I only managed to see the C610IP once in the DHCP client list.

I tried to unplug -> replug the router but to no avail.

View 2 Replies View Related

Linksys Wireless Router :: E4200v1 Get A List Of DHCP Clients On Guest Network

Jul 3, 2012

I've got an E4200v1 running 1.0.04 firmware with guest access enabled. I'd like to find out who is logged in using the guest access. Is there a way to get a list of the DHCP clients on the guest network? I'm able to do this for the non-guest access via the WEB interface's Status->Local Network->DHCP Clients Table page. But I can't find a similar table for the guest network.

View 3 Replies View Related

TP-Link Dual-Band Wireless :: DHCP Client List Customization On WDR4300?

Dec 6, 2012

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : Comcast

So I've been checking my router DHCP list and I usually use the WPS feature to add devices. I know how many devices I have and which ones are wireless etc. I've made address reservations on all the devices that I have and know of. One feature that really frustrates me (which is missing) is no way to rename a device. My iPhone is named: Reggie's iPhone yet the 4300 picks it up as Unknown... I dont understand why. I've renamed it on the iPhone to different things and restarted it but still it comes up as that. I have 2 Nexus 7s and both come up with wierd names, one is for my wife and one is for me and I wish there was a way to name it proper.

Question is: Will the name edit feature ever get added to it? I dont get why it's not there now, it's not really something major (I have a 5 year old router that even has that... and it cant even support N). It's really frustrating to have to guess and check the devices on my network because most of them come up as unknowns.

Right now I'm trying to located another device that's coming up as unknown and now matter how much I try, since the router lacks any feature to assist finding it, it's really frustrating.

something else i noticed: my DHCP List shows all the devices connected with their IP addresses, yet I went into CMD and was doing a random ping command. I'm able to ping 192.168.0.114 with perfect stats back yet on my DHCP List it shows the highest IP is at 192.168.0.112.... Is something wrong here? Is it supposed to not pick up the IPs it gives out? And of course since there isnt a way to tell if that IP is for a WIFI or ethernet device, I have no idea what that device is...

yet i found another ip address on my network by using the ping command. actually I went ahead and did arp -a to find out all the ips with mac addresses. this is a serious flaw with the security of this router!!

View 2 Replies View Related

Linksys Cable / DSL :: X2000 DHCP Client Table Failed To Show Client List

Apr 21, 2013

Do the problem caused by the modems itself or it just sign of faulty Ethernet switch (using 20 port Allied Telesis ethernet switch).
Sometimes I cannot connect to internet due to "unidentified network" buy i can resolve this problem by restarting my modem + switch.

View 4 Replies View Related

Belkin Routers :: N150 Turning DHCP Off

Nov 8, 2012

I've just bought an N150 router. I also have a wireless IP camera. I want to keep the same 192.168.2.3 address for my camera regardless of how many other devices are connected when I switch it on. If the address changes I need to connect a cable to access it.On my previous prehistoric Netgear I could reserve addresses that I didn't want to change. I tried turning off DHCP but then couldn't access the router from the wired PC and had to reset it all. Then I had to run cables down the garden to reconnect the camera.Can I turn DHCP off for some addresses that I want to keep?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved