Linksys Wireless Router :: Finding DHCP List In Admin For WRT160N?
Jan 5, 2012
I have the WRT160N router for 3.5 yrs and it's worked perfectly since installing it. About two weeks ago it began intermittently dropping cable connection. First few times I thought I could resolve it by unplugging/plugging router & modem so they can "re-syn" to the cable connection. That still works but now it occurs sometimes multiple times within a few minutes/hours and then won't happen again for an entire day/days. The other day I had connectivity but instead of the usual 5 bars I only had 3 while using my laptop in the same spot in the house as usual.
View 5 Replies
ADVERTISEMENT
May 7, 2012
I need to get to my web admin page, but I cannot get into my router to do so.IE tells mt that there is a certifacte error, and then gives me the option of going in anyway.When I select that option, nothing happens, and the same IE warning page remains.I am plugged directly into an e-net port on the router, and it is a WRT160N.
View 1 Replies
View Related
Feb 16, 2013
I recently upgraded my Wi-Fi router to an EA3500 and am controlling it using Smart Wi-Fi running on a wired Windows 7 machine.So far, I have been able to add devices to the network without issue and each of those connections works fine. All, except my TV, have been Windows 7 based machines. Smart Wi-Fi Device List has been able to "see" each device and I have been able to add them to that list as well.
I am attempting to add a Windows 8 desktop computer to the network which is using a external USB wireless adapter. That computer can see and connect to the network through the EA3500 and the connection seems to work fine. The only issue is that its adapter does not show up in the Device List.
1) Does the Device List do anything else besides showing a list of devices I chosen to add to my network?
2) How do I get my Windows 8 wireless adapter to show up in the Device List?
View 6 Replies
View Related
Feb 16, 2012
I was unable to access the web admin on my WRT160n v3 w/ latest firmware this morning. Reset config to defaults & was able to get in. Enabled HTTPS access & disabled HTTP access & was right back where I started; reset to defaults again & left both boxes checked. Can access via HTTP, but HTTPS requests get refused/reset.
The reason I needed access was that when I booted up my laptop this morning, my wireless card wasn't picking up an IP address via WIFI, only worked via ethernet, so I need to see what was going on there — several reboots of the router didn't fix, nor has it fixed the HTTPS access problem described above.
View 6 Replies
View Related
Aug 25, 2011
I have purchased E2500 and i am having following problems:
1. DHCP client list not showing - only shows when i reboot the router. After some time, the list never shows even when i press refresh button
2. I can only reserve IP when i reboot the router - after some time i cannot do this action also
I have upgraded to latest firmware and also peformed reset as directed by support.
View 1 Replies
View Related
Jul 3, 2012
I've got an E4200v1 running 1.0.04 firmware with guest access enabled. I'd like to find out who is logged in using the guest access. Is there a way to get a list of the DHCP clients on the guest network? I'm able to do this for the non-guest access via the WEB interface's Status->Local Network->DHCP Clients Table page. But I can't find a similar table for the guest network.
View 3 Replies
View Related
Nov 19, 2011
I keep getting some additional IP addresses logging onto my home network that have an address outside what should be allowed by the router. The server is running at 192.168.2.1 and is set to only allow clients from 192.168.2.2 - 192.168.2.10 so a total of 9 clients should be allowed on.The problem is that something keeps logging in with an address of 192.168.169.2 or 3 etc. Sometimes more than one device at a time.I have assumed that it is some automated or virtual client as I'm pretty certain my network has not been breached. I have a 9 character password with a relatively random alphanumeric combination, although I haven't tried changing the password (I live in a share house with with a bunch of devices using wireless, so I haven't yet bothered). What I don't understand is how it has connected with the xx.xx.169.xx range at all. I have a Belkin 'Share' Wireless N Modem Router and at some stage there was a 'guest' network but that has since been disabled and I still am seeing the extra address. I have attached a screen shot of the DHCP client list on the router.The following is a list of devices that may be on the network at times, I'm thinking one of these may be responsible for the problem:
Windows Vista Desktop - Only LAN device
PS3
Macbook
Epson wireless printer
Android HTC Desire Mobile Phone
Laptops running various Windows versions (XP, Vista and 7)
A few thoughts I had:
- the android phone is capable of running a wireless hotspot, may have to look into it to see if if has been operating as an access point into the Belkin router, but assumed this wouldn't bring up clients connected to the phone on the home router.
- The desktop has PS3 Media server installed to stream video to the PS3 over the network (not that I have ever managed to get it to work), however this is not ever open on the desktop.
View 10 Replies
View Related
Aug 19, 2012
Where do I find the security key for the router as there are a series of numbers on the router and the box. Which one is the security key as it's not identified as such?
View 1 Replies
View Related
Sep 15, 2011
I believe I have the router connected to the computer but its asking for a security key and I dont know where to find it?
View 1 Replies
View Related
May 16, 2012
i looked everwhere for the firmware. cant find it anywhere. looking for 1.0 or 1.1 firmware for wrt300n.
View 4 Replies
View Related
Nov 5, 2011
A retailer (Best Buy's Geek Squad) made adjustments to my Linksys E3000 router when I bought a Sony Media Player from them a number of months ago. It was the first wireless device integrated into my wired LAN network (three computers).
In attempting to set up a GUEST connection, I pulled up Cisco Connect which I originally used to set up my network. The BB Geek didn't use a key and followed a different procedure unknown to me.
As I face the Cisco Connect screen now, it tells me "Can't access your router settings. The router password has been changed." Then in the "Router password" block, it gives the original password I assigned.
I had written another name I thought was associated with the changes made by the BB Geek so I copied the password there now, inserted the new PW, and clicked Next. I was then asked if I wanted to proceed with the change ... but the change it was proposing was the exact PW I just copied. Confused, I cancelled the operation.
View 8 Replies
View Related
Jul 7, 2011
I recently upgraded the OS on my laptop to Windows 7, which wiped out most of my older Vista settings. When I try to connect to my home network, I am prompted for a security key (network key?). How do I find the security key? I can't find any of the paperwork that came with my router.
By the way, I am currently using my desktop, running under Windows XP.
View 2 Replies
View Related
Dec 28, 2007
My wife has a laptop that we want hooked up to the internet through our linksys wireless router. But I cannot remember my security key or passphrase needed to get her on the connection. How do I recover, or find, it?
View 9 Replies
View Related
Jan 12, 2010
How do I find security code for my router. It is out of warranty and live chat will not supply it to me. Is there a default code ?
View 9 Replies
View Related
Jul 28, 2011
Currently my Version 2. linksys wireeless router wouldn't reset it's IP and will NOT connect to the IP listed in my ipconfig,
I'm paranoid that it's something I've downloaded... even though that I'm always careful not to get anything off mistrustful websites! As soon as I download Kill Bill for my gf everything just goes straight to.... ! Would a file even be able to dis-able a router wireless capability? None. of my computers are infected but this is still seriously questionable.
I press this **bleep** button daily for 30 seconds and nothing is reset. My default gateway will not connect and the IP from webpages that show users their IP fail
I'm not sure if I should update the firmware because even if I could my ip.... doesn't persist
View 4 Replies
View Related
Dec 3, 2012
Region : France
Model : TD-W8968
Hardware Version : V1
Firmware Version : TD-W8968_V1_120926
ISP : SFR
Device in question: siemans C610 IP voip phone
Configuration:
* The C610 is directly connected to TD W8968 via the ethernet port number 3 >> ethernet port number 1 is connected to the devolo homeplug 200AVPLUS . The PC is at the other end of the homeplug network
* The DHCP address starts at 192.168.1.100 - 192.168.1.199.
Symptom:
1. It takes a long time (about 2-3 minutes) for the C610IP to obtain the IP address of 192.168.1.100 after the synchronisation of the ADSL line is finished 2. In the DHCP client list, I could only see the IP address of the PC (192.168.1.101) but not the C610 IP. However, if I type 192.168.1.100, I could access to the configuration page of the C610 IP. - I only managed to see the C610IP once in the DHCP client list.
I tried to unplug -> replug the router but to no avail.
View 2 Replies
View Related
Jun 22, 2007
I set up my daughter's Dell laptop last year to our WRT54G wireless router and I'm trying to connect to our wireless network now with another laptop (a new Dell) and can't find (or remember) my security code or pass phrase. Is there any place on the old laptop that I can access this info? How can I configure the new laptop without this info?
View 9 Replies
View Related
Apr 21, 2013
Do the problem caused by the modems itself or it just sign of faulty Ethernet switch (using 20 port Allied Telesis ethernet switch).
Sometimes I cannot connect to internet due to "unidentified network" buy i can resolve this problem by restarting my modem + switch.
View 4 Replies
View Related
Dec 6, 2012
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : Comcast
So I've been checking my router DHCP list and I usually use the WPS feature to add devices. I know how many devices I have and which ones are wireless etc. I've made address reservations on all the devices that I have and know of. One feature that really frustrates me (which is missing) is no way to rename a device. My iPhone is named: Reggie's iPhone yet the 4300 picks it up as Unknown... I dont understand why. I've renamed it on the iPhone to different things and restarted it but still it comes up as that. I have 2 Nexus 7s and both come up with wierd names, one is for my wife and one is for me and I wish there was a way to name it proper.
Question is: Will the name edit feature ever get added to it? I dont get why it's not there now, it's not really something major (I have a 5 year old router that even has that... and it cant even support N). It's really frustrating to have to guess and check the devices on my network because most of them come up as unknowns.
Right now I'm trying to located another device that's coming up as unknown and now matter how much I try, since the router lacks any feature to assist finding it, it's really frustrating.
something else i noticed: my DHCP List shows all the devices connected with their IP addresses, yet I went into CMD and was doing a random ping command. I'm able to ping 192.168.0.114 with perfect stats back yet on my DHCP List it shows the highest IP is at 192.168.0.112.... Is something wrong here? Is it supposed to not pick up the IPs it gives out? And of course since there isnt a way to tell if that IP is for a WIFI or ethernet device, I have no idea what that device is...
yet i found another ip address on my network by using the ping command. actually I went ahead and did arp -a to find out all the ips with mac addresses. this is a serious flaw with the security of this router!!
View 2 Replies
View Related
Jul 29, 2011
I have a router WRT160N and I want to connect an AP using a wireless bridge to enhance my WIFI coverage.Which AP is recommended to use without cable together with the WRT160N?
View 7 Replies
View Related
Oct 15, 2012
confirm if the highest speed I can get over WiFi with WRT160N v3 is actually 270 Mbps (and not 300 Mbps as advertised), And there's one more thing - is it normal to have Signal: -51; Noise: -93, SNR: 43, Signal quality 53% if I am only 2 meters far from a router? TX power is set to 28.
View 3 Replies
View Related
Jul 8, 2011
I just got a WRV 210 wireless router (three of them actually, planning to set up a VPN). But I can't set the admin password. I've tried 4 times, and every time, i've got to hold the reset button to reset to factory settings in order to access the management pages! I enter the new password in both fields, and then click to save the settings. It restarts. Then i try to log in - and it doesn't accept the new password. It doesn't accept the default password. I've tried with admin/(new password) and (new password)/(new password), and admin/admin. None of them work, forcing me to reset router to factory settings. I've tried a password composed of 6 letters followed by a . Thinking that maybe the . was throwing it off, I tried 6 letters followed by 3 numbers. That doesn't work either. I've updated to firmware version 2.0.1.5. No luck.
View 1 Replies
View Related
Feb 23, 2012
I don't have to completely reset my router as I have a ton of configs on it. Anyway, recently for some reason, I lost all access to my admin page. Cisco Connect also cannot find the router. Funny thing is that all of my wireless profiles work just fine. Meaning all of the computers in my home connect to the internet just fine using the router. Both the guest access and WPA connected machines.[url]...
View 1 Replies
View Related
Dec 18, 2011
I recently tried to edit settings on my E3200 and was unable to get to the page. I typed in 192.168.1.1 in the address bar, made sure no proxies were enabled and tried on wired and wireless computers and all the times it said "page could not be displayed" i haven't not reset with the button on the back. I also did an map scan of the router and this is what came up
Interesting ports on 192.168.1.1:
Not shown: 65531 closed ports
PORT STATE SERVICE
139/tcp open netbios-ssn
443/tcp open https
445/tcp open microsoft-ds
1780/tcp open unknown
View 2 Replies
View Related
Aug 11, 2012
As I've seen in my Linksys' admin panel, I have a log option (Administration/Log). So if I enabled it i can check which sites was browsed in my home network?And the second question: if Linksys can store the browsed sites history and if I will use a VPN connection on my PC or iPhone (not router!) the logs will be still look like before setting-up VPN on PC? So like: [URL] not like: [URL]?
View 3 Replies
View Related
Mar 6, 2013
I took one and a half hours to get everything set up, I've got a PPoE connection, my problem is that ever since I entered the administration interface each and every page takes 2-5 minutes to load, it's absurdly slow, also, when trying to setup my WiFi, it timed out several times, I updated the router to the latest firmware, the same issue, it took me 4-5 retries to get WiFi set up properly. Sometimes navigating from page to page is quicker, 30-40seconds, but still those are some big times.
Is this normal behavior or do I have a hardware problem and I need to take it back and request a new one?
Mention: I am wired from a laptop, all the lights are blue, blinking nicely.
View 9 Replies
View Related
Apr 17, 2012
how to change username admin to something different. I can reset the router password but there's no easily identifiable option for changing the username.
View 5 Replies
View Related
Sep 29, 2011
I have an E1000 linksys router. I am trying to determine the admin password. I have looked at seeral entries regarding this. I do not have CICSO connect installed. Not sure why. The router works fine. I have the CD that came with the router. I have also downloaded current version of connect software. Both of them want to config the router. The first item asked for is the admin password. I know I press reset button. I am trying to retrieve password without doing that.
View 1 Replies
View Related
Apr 1, 2012
I want access the my E1200 website in order to implement new username and password to secure the network.
View 1 Replies
View Related
May 1, 2010
I have a wrt160n v3. This is the 3rd one - both the first 2 were defective. I have spent approximately 8 hours troubleshooting the other 2 only to be told they're defective. So, I got a new one. Now, this one keeps cutting in and out. I want as my iPhone constantly switches from 3G to wifi on and over every minute. It really ticks me off! What can I do to fix this? This is a different issue than the original one (very slow) and 2nd (no signal). It's disappointing for a $90 router to do this. I also see the wireless icon on the router flash.
View 6 Replies
View Related
Jan 4, 2012
I have all the ports open necessary and i have upnp enabled. my modem is a webmaster DPC2100 series.
View 2 Replies
View Related
Jan 12, 2012
turning my wireless back on. Some how in attempting to create a shared file between my pc and my wife's Mac the wireless has been disabled. I have tried resetting the device several times following the instructions on line however I still can not get the wireless to re activate. I tried reverse directions from the posts on how to turn off the wireless but still no luck. I tried restoring the computer to a later date?
View 2 Replies
View Related
Dec 5, 2012
How will I reset WRT 160N?
View 1 Replies
View Related
