Linksys Wireless Router :: Admin Panel - Logs And VPN Formation?

Aug 11, 2012

As I've seen in my Linksys' admin panel, I have a log option (Administration/Log). So if I enabled it i can check which sites was browsed in my home network?And the second question: if Linksys can store the browsed sites history and if I will use a VPN connection on my PC or iPhone (not router!) the logs will be still look like before setting-up VPN on PC? So like: [URL] not like: [URL]?

View 3 Replies


ADVERTISEMENT

Linksys Wireless Router :: WRT120N - Can't Access Admin Panel From Other Computer

Dec 16, 2011

Before, I can access admin panel of router via 192.168.1.1 on any computer, be it wired or wireless.This time, I can't anymore.This time, I can only access admin panel on 1 computer only. The computer in which it's directly connected to the router, wired. All other computers, connected to a switch, which the switch is also connected to router, can no longer access admin panel.I can still open 192.168.1.1 with a username/password prompt but I can't log in. It's like it's always wrong password. Same with accessing from laptop (wireless).Before, I can access admin panel from any computer (wired), even from laptop (wireless). There are times that I have to restart router in order to fix my internet connection. Only this time, I have to access it from the computer that's directly connected to router (wired).How do I revert it back so that all computers will be able to connect to admin panel of router?I have just finished upgrading firmware from 1.0.05 to 1.0.06 but I still have the same problem.

View 5 Replies View Related

Linksys Wireless Router :: WRT54G To Transfer Admin Control Panel From Old Computer

Dec 30, 2011

When I first installed my wireless router a few years ago, I did it with my old computer which has Windows XP as its operating system.  It is on this computer that the Linksys "admin control panel" is installed, which allows me see what computers are connected through the router, see what the settings of the router are, etc. I recently purchased a new computer which has Windows 7 as the operating system.  As I transfer programs and documents from my old computer to my new computer, I have run into the problem of how to transfer the Linksys "admin control panel" from my old computer to my new computer. The original installation CD for Linksys won't work with Windows 7 so I don't even have that as a starting point.  I tried going to the web-based admin site, but can't access it from either computer.

View 8 Replies View Related

Unable To Connect To Router Admin Panel At 192.168.1.1

Oct 18, 2012

I just got back from being gone for a couple weeks and my router stopped working. I tried to reset the router and connect to the admin screen at 192.168.1.1, but it gives a "page not found" error. My internet work with a wired connection to the router, and the computer's IP address is 66.xxx.xxx.xxx. Looking at most forums which talk about this problem it seems like most people have IP addresses starting with 192. Why does mine start with 66? Is this related to the problem of being unable to access the admin screen? This is a home network and I'm running Ubuntu and have a Linksys WRT54G router. I get the same IP address whether I connect just from the modem to the PC, or from modem to router to PC.

View 3 Replies View Related

AAA/Identity/Nac :: ACS V5.1 View Not Showing Full Admin Logs?

May 18, 2011

I am having trouble viewing all the Administration logs in ACS View. I have my Local Log Target set to a Maximum log retention period of 90 days. In ACS View I can display authentications that go back 90 days + However when I try and display the "ACS_Configuration_Audit" in View and perform a Custom query that goes back 90 days it will only display about 35 days of Admin logs.I know the logs are there because when I go into CLI and do a search like "show logging | i "ObjectType=Administrator Account" the Administration logs go back over a year.why ACS View cannot display all the Admin logs?The ACS is running v5.1.0.44 Patch 6 (Also experiencing this in a v5.2 ACS as well)

View 2 Replies View Related

Linksys Wireless Router :: Where Is Advanced Settings Panel In EA6500

Oct 28, 2012

I want to know where I can edit advance settings of my EA6500. Cisco Clout Connect is too basic for my taste.

View 1 Replies View Related

Linksys Wireless Router :: EA6500 Configuration Panel To Proceed With Cloning MAC Address

Jan 13, 2013

I am going to replace my Netgear DGND3700v2 router with Linksys EA6500. I hope that the signal strength of this router will be better, particularly for 5GHz.The problem is that I have a cable connection to Internet and my line has MAC address of Netgear assigned by my ISP. I would like to clone this address to EA6500 to test the power of the signal, before making the final decision to replace Netgear.My question is how to do this in off-line mode. I cannot have Internet before cloning.I've been using Internet Explorer with various addresses - 192.168.0.1; 192.168.1.1; myrouter.local; even 192.168.2.1 and some others but couldn't get connected to EA6500. Of course, the original CD suppied with the router does not work, either.Is there any other way to get to router configuration panel to proceed with cloning the MAC address?

View 1 Replies View Related

Linksys Wireless Router :: Reading WRT610N Logs?

Feb 4, 2010

Is LinkLogger the only option for reading logs on the WRT610Nv2? I read about Linksys's own software called LogViewer 1.14 but I can't find it.

View 3 Replies View Related

Linksys Wireless Router :: E4500 - Troubleshooting Logs Not Showing Website Url?

Oct 31, 2012

I have linksys E4500 and I would like to be able to see the website visited vs ip address.Is there a way to enable same or achive same via parental controls.Again I do not want to block a website but monitor which websites are visited. Is this achievable via router or an additional software/hardware required to be used with router

View 5 Replies View Related

Linksys Wireless Router :: EA4500 / How To Send Logs To Syslog Or Via Email

Mar 5, 2013

I absolutely need to collect the router logs and send them to a syslog daemon or via email.

View 9 Replies View Related

Linksys Wireless Router :: WRT160N Cannot Open As An Admin

May 7, 2012

I need to get to my web admin page, but I cannot get into my router to do so.IE tells mt that there is a certifacte error, and then gives me the option of going in anyway.When I select that option, nothing happens, and the same IE warning page remains.I am plugged directly into an e-net port on the router, and it is a WRT160N.

View 1 Replies View Related

Linksys Wireless Router :: Can't Change Admin Password On WRV210

Jul 8, 2011

I just got a WRV 210 wireless router (three of them actually, planning to set up a VPN). But I can't set the admin password. I've tried 4 times, and every time, i've got to hold the reset button to reset to factory settings in order to access the management pages! I enter the new password in both fields, and then click to save the settings. It restarts. Then i try to log in - and it doesn't accept the new password. It doesn't accept the default password. I've tried with admin/(new password) and (new password)/(new password), and admin/admin. None of them work, forcing me to reset router to factory settings. I've tried a password composed of 6 letters followed by a . Thinking that maybe the . was throwing it off, I tried 6 letters followed by 3 numbers. That doesn't work either. I've updated to firmware version 2.0.1.5. No luck. 

View 1 Replies View Related

Linksys Wireless Router :: Cannot Connect To Admin Page At All On E3200

Feb 23, 2012

I don't have to completely reset my router as I have a ton of configs on it.  Anyway, recently for some reason, I lost all access to my admin page.  Cisco Connect also cannot find the router.  Funny thing is that all of my wireless profiles work just fine.  Meaning all of the computers in my home connect to the internet just fine using the router.  Both the guest access and WPA connected machines.[url]...

View 1 Replies View Related

Linksys Wireless Router :: E3200 Admin Page Times Out

Dec 18, 2011

I recently tried to edit settings on my E3200 and was unable to get to the page. I typed in 192.168.1.1 in the address bar, made sure no proxies were enabled and tried on wired and wireless computers and all the times it said "page could not be displayed" i haven't not reset with the button on the back. I also did an map scan of the router and this is what came up
 
Interesting ports on 192.168.1.1:
Not shown: 65531 closed ports
PORT STATE SERVICE
139/tcp open netbios-ssn
443/tcp open https
445/tcp open microsoft-ds
1780/tcp open unknown

View 2 Replies View Related

Linksys Wireless Router :: WRT160NL - Slow Admin Interface

Mar 6, 2013

I took one and a half hours to get everything set up, I've got a PPoE connection, my problem is that ever since I entered the administration interface each and every page takes 2-5 minutes to load, it's absurdly slow, also, when trying to setup my WiFi, it timed out several times, I updated the router to the latest firmware, the same issue, it took me 4-5 retries to get WiFi set up properly. Sometimes navigating from page to page is quicker, 30-40seconds, but still those are some big times.
 
Is this normal behavior or do I have a hardware problem and I need to take it back and request a new one?
 
Mention: I am wired from a laptop, all the lights are blue, blinking nicely.

View 9 Replies View Related

Linksys Wireless Router :: EA3500 Change Admin Username?

Apr 17, 2012

how to change username admin to something different. I can reset the router password but there's no easily identifiable option for changing the username. 

View 5 Replies View Related

Linksys Wireless Router :: E1000 Determine Admin Password

Sep 29, 2011

I have an E1000 linksys router.  I am trying to determine the admin password.  I have looked at seeral entries regarding this.  I do not have CICSO connect installed.  Not sure why.  The router works fine.  I have the CD that came with the router.  I have also downloaded current version of connect software.  Both of them want to config the router.  The first item asked for is the admin password.  I know I press reset button.  I am trying to retrieve password without doing that.

View 1 Replies View Related

Linksys Wireless Router :: E1200 - How To Access Router Admin Page

Apr 1, 2012

I want access the my E1200 website in order to implement new username and password to secure the network.

View 1 Replies View Related

D-Link DIR-615 :: Formation Regarding DHCP Reservations List?

Jan 2, 2012

I have a DIR-615 router running FW version 3.01 with Hardware Version: C1 , my xbox is wired to my router. When I port forwarded, i had an strict nat, but had the best connection, but not by very much. When i put DMZ on, i had a strict nat, and the connection to other people was a bit better then UPnP.When i had UPnP on i had a open nat, i could barely be able to connect to anyone.what is a DHCP Reservations List?

View 3 Replies View Related

Linksys Wireless Router :: EA3500 - Change SSID In Admin Area?

Jun 9, 2012

I have logged into the admin area 192.168.... And I do not see where to change the SSID.

View 2 Replies View Related

Linksys Wireless Router :: Finding DHCP List In Admin For WRT160N?

Jan 5, 2012

I have the WRT160N router for 3.5 yrs and it's worked perfectly since installing it. About two weeks ago it began intermittently dropping cable connection. First few times I thought I could resolve it by unplugging/plugging router & modem so they can "re-syn" to the cable connection. That still works but now it occurs sometimes multiple times within a few minutes/hours and then won't happen again for an entire day/days. The other day I had connectivity but instead of the usual 5 bars I only had 3 while  using my laptop in the same spot in the house as usual.

View 5 Replies View Related

Linksys Wireless Router :: EA6500 Admin Page Hangs On Login?

Feb 3, 2013

I have been through three chat sessions on this without resolution and support tells me just to factory reset. After some time (weeks) after a successful local login to the admin page subsequent attempt to login just hang. After entering the admin password the page changes and says "Waiting" under revolving circles. It will sit there for over 1 hour. I have tried IE, chrome and firefox on Windows 7 and Windows 8 on three different machines and it behaves the same. Of course I have to go through this same process with the support people every time and every time they come to the conclusion that I have to do a factory reset. But so far Linksys denies that there is a defect.

View 9 Replies View Related

Linksys Wireless Router :: E3000 Cannot Access Admin Via Cisco Connect

Apr 25, 2012

I tried all methods: Cisco Connect (on Vista), http and https, but none works. However, the router seems function correctly. My laptop can acquire DHCP address and browse via the router. But I just cannot connect to the router to perform Admin tasks.Problem: when I launch CiscoConnect: the GUI shows "Cannot access your router", even though I am using the router to browse the net wirelessly and wirely. Using browser to navigate to http://192.168.1.1 and https://192.168.1.1 also give me cannot access error!

View 1 Replies View Related

Linksys Wireless Router :: E4200 Can’t Open Admin Page

Oct 24, 2011

I have set up a second E4200 as an AP.Even though I’m getting a signal from it I can’t open the ADMIN page. Also, it’s NOT showing up on my main 4200 "DHCP client table'.I configured it as a static IP 192.168.1.145 during setup and still cannot get in. My ping to .145 comes back “timeout”!Since I’m getting a full signal from it, it must be working so why can’t I get in and why doesn't it show up?

View 7 Replies View Related

Linksys Wireless Router :: No HTTPS Access To Admin Interface On WRT160n V3?

Feb 16, 2012

I was unable to access the web admin on my WRT160n v3 w/ latest firmware this morning. Reset config to defaults & was able to get in. Enabled HTTPS access & disabled HTTP access & was right back where I started; reset to defaults again & left both boxes checked. Can access via HTTP, but HTTPS requests get refused/reset.
 
The reason I needed access was that when I booted up my laptop this morning, my wireless card wasn't picking up an IP address via WIFI, only worked via ethernet, so I need to see what was going on there — several reboots of the router didn't fix, nor has it fixed the HTTPS access problem described above. 

View 6 Replies View Related

Linksys Wireless Router :: E2000 -Admin User ID Changed To SSID Name?

Jul 12, 2010

I have manually configured the E2000 and set the admin password. When I was trying to log back in, I could not. I reset and reconfigured and set the password again. I still could not log in using "admin" and the password I set up. I thought I was losing my mind. Just on a hunch, I used the SSID name instead of "admin", then entered the password that worked. I am able to login, but I need the username to be admin, not the SSID. Has anyine else had this issue? Any way to change the administrator name back to admin??

View 5 Replies View Related

Linksys Wireless Router :: EA6500 No Admin Access Until Physically Reboot

Nov 11, 2012

Just setup my new EA6500 router and while in general it seems to be performing ok I am experiencing some problems with the admin. It seems that frequently either via cloud or local i get the cannot find router message or waiting graphic which results me in having to manually reboot the router so that i can access the admin page again, The router still works fine but no admin access until i physically reboot. This kind of defeats the whole purpose of using cloud if just by accessing the router or making changes it leaves admin access inoperable!

View 9 Replies View Related

Linksys Wireless Router :: Unable To Access Cisco Admin Page For 54G V5

May 3, 2012

I moved. Runnig an iMac at home. Can connect to the internet but was not able to access my cisco admin page for 54G V5.  Also need to connect VPN but unable to. 

View 1 Replies View Related

Linksys Wireless Router :: WRT54G - Lost Username And Password For Admin Page

Apr 30, 2007

I seem to have lost my username and password for the admin page for my WRT54G router.Is there a way to retrieve or reset the login?

View 9 Replies View Related

Linksys Wireless Router :: EA4500 - Admin Username / Password Versus SSID / WPA

May 18, 2012

The EA4500 web-settings application asks for a username and password.  The username is "admin" and the password is my long (60 character) wpa key.  I see where I can change the password but it says I'll lose all wireless connections.  This doesn't make sense to me.  I would think the router administration username and password are completely separate from the ssid and wpa key. This was the case with my earlier LinkSys router. I'd like a router administration username to be something other than the generic "admin" and a password that is easier than my long wpa key.  I want a separate ssid and wpa key (what I currently have).

View 2 Replies View Related

Linksys Wireless Router :: WRT610N - HTTPS Secure Login To Admin Page?

Mar 29, 2013

I am trying to log into my WRT610N version 2.0 Router  admin page 192.168.1.1 using the secure HTTPS://192.168.1.1 protocol I have the router local management setting to allow both http and https access login:192.168.1.1/Management.asp I am using Microsoft IE version 10 and Firefox version 19.02 and latest Chrome browsers and none of them will work using the HTTPS protocol.This used to work in the past using older versions of the browsers though I would see a certicificate error warning.I have 2.00.01 build 15 firmware installed and I already tried reseting the router.  Perhaps the router needs new firmware update to handle this with the latest browsers?

View 6 Replies View Related

Linksys Wireless Router :: WRP160N - Not Accepting Admin Password After Firmware Upgrade

May 9, 2012

I just installed the firmware upgrade 3.0.03 for my WRP160N router.  It is now not accepting my Admin password.  Nothing else has changed expect network name now shows linksys and not my assigend network name (SSID)

View 1 Replies View Related

Linksys Wireless Router :: WRT610N V2 Access Restrictions Menu Is Missing In Admin Gui

Nov 18, 2011

I 'd like to use the access restrictions capabilities of the WRT610N v2. Unfortunely the "Access Restrictions" menu is missing in the admin GUI; I 've got all the others : "Set -up", "Wireless", "Security", Storage, Applications and Gaming, Administration and Status. I've checked the Firmware already and i'm using the very last one available on the cisco web site. I also noticed that I do not have the "Linksys by Cisco" text on the upper left corner as one can read on user guide but just "Cisco".

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved