Linksys Wireless Router :: WRT54G To Transfer Admin Control Panel From Old Computer
Dec 30, 2011
When I first installed my wireless router a few years ago, I did it with my old computer which has Windows XP as its operating system. It is on this computer that the Linksys "admin control panel" is installed, which allows me see what computers are connected through the router, see what the settings of the router are, etc. I recently purchased a new computer which has Windows 7 as the operating system. As I transfer programs and documents from my old computer to my new computer, I have run into the problem of how to transfer the Linksys "admin control panel" from my old computer to my new computer. The original installation CD for Linksys won't work with Windows 7 so I don't even have that as a starting point. I tried going to the web-based admin site, but can't access it from either computer.
View 8 Replies
ADVERTISEMENT
Dec 16, 2011
Before, I can access admin panel of router via 192.168.1.1 on any computer, be it wired or wireless.This time, I can't anymore.This time, I can only access admin panel on 1 computer only. The computer in which it's directly connected to the router, wired. All other computers, connected to a switch, which the switch is also connected to router, can no longer access admin panel.I can still open 192.168.1.1 with a username/password prompt but I can't log in. It's like it's always wrong password. Same with accessing from laptop (wireless).Before, I can access admin panel from any computer (wired), even from laptop (wireless). There are times that I have to restart router in order to fix my internet connection. Only this time, I have to access it from the computer that's directly connected to router (wired).How do I revert it back so that all computers will be able to connect to admin panel of router?I have just finished upgrading firmware from 1.0.05 to 1.0.06 but I still have the same problem.
View 5 Replies
View Related
Aug 11, 2012
As I've seen in my Linksys' admin panel, I have a log option (Administration/Log). So if I enabled it i can check which sites was browsed in my home network?And the second question: if Linksys can store the browsed sites history and if I will use a VPN connection on my PC or iPhone (not router!) the logs will be still look like before setting-up VPN on PC? So like: [URL] not like: [URL]?
View 3 Replies
View Related
Feb 26, 2011
when i enter 2 Access Restrictions & add put some data After a period of time Control Panel crashes
View 6 Replies
View Related
Oct 18, 2012
I just got back from being gone for a couple weeks and my router stopped working. I tried to reset the router and connect to the admin screen at 192.168.1.1, but it gives a "page not found" error. My internet work with a wired connection to the router, and the computer's IP address is 66.xxx.xxx.xxx. Looking at most forums which talk about this problem it seems like most people have IP addresses starting with 192. Why does mine start with 66? Is this related to the problem of being unable to access the admin screen? This is a home network and I'm running Ubuntu and have a Linksys WRT54G router. I get the same IP address whether I connect just from the modem to the PC, or from modem to router to PC.
View 3 Replies
View Related
Feb 7, 2011
Here is the setup: A US Robotics USR-9108 router is connected to an ADSL modem via ethernet cable. The modem, upon connecting with the ISP, provides a gateway address of 192.168.1.1 to the router. End-users including me connect to the internet through the router via WiFi and are assigned the IP 192.168.1.2...192.168.1.255.
When disconnected from the modem, I can access the control panel via 192.168.3.1 but once the ethernet cable is plugged in I cannot access the above-mentioned IP; connecting to 192.168.1.1 opens up the modem's control panel. Any possible way to access the router control panel while it is connected to the internet?
View 2 Replies
View Related
Apr 30, 2007
I seem to have lost my username and password for the admin page for my WRT54G router.Is there a way to retrieve or reset the login?
View 9 Replies
View Related
Apr 6, 2013
i have a linksys x3000 router, is there anyway of getting into the routers control panel to see the previous webpages that have been viewed over the wifi connection?
View 3 Replies
View Related
May 26, 2011
I just installed Windows XP Professional on my Toshiba-X205 laptop and I am having a problem getting the OS to detect my NIC. I can not remember how to go into the control panel and configure settings so the OS will detect my wireless network or should i say i can not get my OS to detect my NIC so i can to connect to my wireless network. I think i may need to install the device driver for the NIC but i don't remember which driver i need for the NIC of my laptop and i can not find it on the Toshiba website, not supported anymore.
View 1 Replies
View Related
Nov 3, 2012
problems with laptop, one of which is i am unable to get wireless connection again, no network connections are appearing in control panel?
View 5 Replies
View Related
Jan 8, 2011
just i purchase cisco access point and I tried to access control panel to setup wireless security but the page i issued not display 192.168.1.245, there is any wayes to connet device web base ??
View 4 Replies
View Related
May 7, 2013
Region : Others
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :
I am struggling to get a printer added through the print server. The printer is set up in the TP-Link USB Printer Controller and selected as the auto-connect printer. I can scan through the server, but can't add the printer in control panel or see it as a option when printing. The printer is a Samsung SCX-340F.
View 2 Replies
View Related
Aug 12, 2012
I can not get to my control panel. I have tried 192.168.1.1 and 192.168.0.1,. I do have it flashed with DD-wrt. I can access the internet with it, the lights look correct, I don,t believe it is bricked. I have tried hard reset and soft reset.
View 5 Replies
View Related
Dec 15, 2011
I set a password and everything on my n300's Netgear Genie, but every time I go to routerlogin or 10.0.0.1, it just shows me the full control panel and never prompts me to log in. Isn't security a bit too lax over there? I even click log out and it says i logged out, then I re-visit and I'm always automatically logged in.
View 3 Replies
View Related
Apr 29, 2008
I have a WRT54G wireless router ... I want to connect a new laptop through it ... but I need either a network key or a password ... cant locate these ..
View 8 Replies
View Related
May 8, 2012
It constantly disconnecting and wouldn't stay connected for a long period of time, so I tried messing with the settings and it no longer connects to the internet. It tells me that the settings for this router is not compatible for the computer settings. I have reset the router to its factory settings, restarted the computer, restarted the router but nothing changed. I have tried plugging my computer to the router via ethernet cord and typing in 192.168.1.1 in the address field of Internet explorer and nothing comes up. I also forgot the password to the router!
View 1 Replies
View Related
Jul 14, 2007
Am trying to set up a laptop computer to my wireless network (WRT54G V6)
View 9 Replies
View Related
Aug 22, 2011
I am using a LinkSys Model: WRT54G Version: 6 wireless router configured to use WEP.I have two computers, the main desktop and a laptop for mobile operation.How do I configure the LinkSys to allow the laptop to access a external (mapped) USB drive on the desktop?
The laptop can access the mapped drive on the desktop when it is hardwired to the LinkSys (i.e., not wireless) but I cannot find a reference in the Pdf manual or online on how to access the drive on the desktop from the laptop when the laptop is connected via the WiFi.The desktop is running XpSp3 and the laptop is Vista.A second and more important question is should I do this. Can the accessing of the drive via the WiFi be done with adequate security. I would rather err on the side of caution.
View 4 Replies
View Related
Aug 28, 2011
So I have a WRT54G router since a couple of years now. Laptop (Win7 64bit), ipod, ipad, phones can connect to it without a problem, but new computer (Win7 64bit) can't. I can connect the PC via ethernet without a problem though.
I powercycled my devices, I changed broadcasting options off and then back on, changed my security mode, tried the MAC Cloning (after doing the MAC Cloning, I lost internet connectivity even through ethernet), resetted my security settings, changed SSID, I'm broadcasting through channel 11 2.462. I also tried deleting the HomeGroup
Important fact: the network is in the list of available wireless network, but Signal Strength is No Signal and I can't connect to it. My network adapter is ASUS 802.11n Wireless LAN Card, drivers are up to date. I've upgraded to the latest router firmware.
[Code]....
View 4 Replies
View Related
Oct 17, 2011
I am having problems connecting to my wireless internet. We were getting a poor signal so we moved our router to our living room where we always are, but now we can't connect. We tried resetting everything, turned on and off several times. Went to the linksys wireless set up page, changed SSID and password. Still can't connect with the computer or our iphones. It shows our SSID is there but won't connect. My internet when plug directly to the computer works fine (I am using it now). My computer can connect to the router Linksys WRT54G, we just can't get it to connect to the wireless.
View 1 Replies
View Related
Apr 4, 2012
I have a Linksys WRT54G to which 2 computers are connected of which one has no problems at all.The other computer just had its hard drive replaced and Windows XP Pro SP1 installed on the new hard drive. With the new operating system, I cannot get the computer to access the router. The connection status reports that the network device is working but IPCONFIG /ALL reports nothing (blank). The NIC is onboard the motherboard (ASUS P5LP-LE). I have swapped out cable ports at the router and tried a different cable to the faulty computer to no avail. If I had a spare NIC I would already have tried that too. FYI, it was working without problems prior to the hard drive crash that prompted the new drive and OS install.I tried a wireless USB network interface (Zonet ZEW2508) and the computer also reports it working. However, the network icon continually cycles between connected and unavailable, about 6 seconds connected and 1 second unavailable. IPCONFIG also reports blank on this.
View 11 Replies
View Related
Oct 28, 2012
I want to know where I can edit advance settings of my EA6500. Cisco Clout Connect is too basic for my taste.
View 1 Replies
View Related
Jan 13, 2013
I am going to replace my Netgear DGND3700v2 router with Linksys EA6500. I hope that the signal strength of this router will be better, particularly for 5GHz.The problem is that I have a cable connection to Internet and my line has MAC address of Netgear assigned by my ISP. I would like to clone this address to EA6500 to test the power of the signal, before making the final decision to replace Netgear.My question is how to do this in off-line mode. I cannot have Internet before cloning.I've been using Internet Explorer with various addresses - 192.168.0.1; 192.168.1.1; myrouter.local; even 192.168.2.1 and some others but couldn't get connected to EA6500. Of course, the original CD suppied with the router does not work, either.Is there any other way to get to router configuration panel to proceed with cloning the MAC address?
View 1 Replies
View Related
Oct 30, 2012
I have 2 ME3600Xs and utilize Broadcast and Multicast storm control on client facing interfaces. One of my ME3600s is reporting a Multicast storm and that a packet filter action has been applied. The strange thing is that it is showing up on an Admin Down interface that has nothing connected to it. [code]
View 2 Replies
View Related
Aug 26, 2011
Three computers (two laptops - both XP, one desktop - XP) suddenly couldn't access the Internet through LAN (the Local Area Connection icon always stays disconnected with the three computers) after working perfectly fine for months. The thing is one desktop computer - XP still can connect through LAN and the wireless connection is still working. So I don't know if the problem is with the computers who can't connect through LAN or the router itself, a LINKSYS WRT54G.
View 2 Replies
View Related
Feb 23, 2012
1 newer build computer connected to D-link 655 via Cat6.1 laptop computer connected to same D-link 655 via Wireless N minicard. (Intel) (130Mbps connected) Router on a 10 foot shelf, always have full bar in wireless strength on 2nd computer.
Both computers can upload and download as expected from the internet. Transfers between the two computers though are slow. Both computers are loaded with Windows 7. Transferring files to or from the laptop transfers at 1.5MB/sec to 2 MB/sec.
View 1 Replies
View Related
May 7, 2012
I need to get to my web admin page, but I cannot get into my router to do so.IE tells mt that there is a certifacte error, and then gives me the option of going in anyway.When I select that option, nothing happens, and the same IE warning page remains.I am plugged directly into an e-net port on the router, and it is a WRT160N.
View 1 Replies
View Related
Jul 8, 2011
I just got a WRV 210 wireless router (three of them actually, planning to set up a VPN). But I can't set the admin password. I've tried 4 times, and every time, i've got to hold the reset button to reset to factory settings in order to access the management pages! I enter the new password in both fields, and then click to save the settings. It restarts. Then i try to log in - and it doesn't accept the new password. It doesn't accept the default password. I've tried with admin/(new password) and (new password)/(new password), and admin/admin. None of them work, forcing me to reset router to factory settings. I've tried a password composed of 6 letters followed by a . Thinking that maybe the . was throwing it off, I tried 6 letters followed by 3 numbers. That doesn't work either. I've updated to firmware version 2.0.1.5. No luck.
View 1 Replies
View Related
Feb 23, 2012
I don't have to completely reset my router as I have a ton of configs on it. Anyway, recently for some reason, I lost all access to my admin page. Cisco Connect also cannot find the router. Funny thing is that all of my wireless profiles work just fine. Meaning all of the computers in my home connect to the internet just fine using the router. Both the guest access and WPA connected machines.[url]...
View 1 Replies
View Related
Dec 18, 2011
I recently tried to edit settings on my E3200 and was unable to get to the page. I typed in 192.168.1.1 in the address bar, made sure no proxies were enabled and tried on wired and wireless computers and all the times it said "page could not be displayed" i haven't not reset with the button on the back. I also did an map scan of the router and this is what came up
Interesting ports on 192.168.1.1:
Not shown: 65531 closed ports
PORT STATE SERVICE
139/tcp open netbios-ssn
443/tcp open https
445/tcp open microsoft-ds
1780/tcp open unknown
View 2 Replies
View Related
Mar 6, 2013
I took one and a half hours to get everything set up, I've got a PPoE connection, my problem is that ever since I entered the administration interface each and every page takes 2-5 minutes to load, it's absurdly slow, also, when trying to setup my WiFi, it timed out several times, I updated the router to the latest firmware, the same issue, it took me 4-5 retries to get WiFi set up properly. Sometimes navigating from page to page is quicker, 30-40seconds, but still those are some big times.
Is this normal behavior or do I have a hardware problem and I need to take it back and request a new one?
Mention: I am wired from a laptop, all the lights are blue, blinking nicely.
View 9 Replies
View Related
Apr 17, 2012
how to change username admin to something different. I can reset the router password but there's no easily identifiable option for changing the username.
View 5 Replies
View Related
Sep 29, 2011
I have an E1000 linksys router. I am trying to determine the admin password. I have looked at seeral entries regarding this. I do not have CICSO connect installed. Not sure why. The router works fine. I have the CD that came with the router. I have also downloaded current version of connect software. Both of them want to config the router. The first item asked for is the admin password. I know I press reset button. I am trying to retrieve password without doing that.
View 1 Replies
View Related
