Wireless Network Connections Is Not Appearing In Control Panel?
Nov 3, 2012problems with laptop, one of which is i am unable to get wireless connection again, no network connections are appearing in control panel?
View 5 Replies
ADVERTISEMENT
Wireless :: How To Go Into Control Panel And Configure Settings
May 26, 2011I just installed Windows XP Professional on my Toshiba-X205 laptop and I am having a problem getting the OS to detect my NIC. I can not remember how to go into the control panel and configure settings so the OS will detect my wireless network or should i say i can not get my OS to detect my NIC so i can to connect to my wireless network. I think i may need to install the device driver for the NIC but i don't remember which driver i need for the NIC of my laptop and i can not find it on the Toshiba website, not supported anymore.
View 1 Replies View RelatedCisco Wireless :: Can't Access Control Panel Of WAP4410n
Jan 8, 2011just i purchase cisco access point and I tried to access control panel to setup wireless security but the page i issued not display 192.168.1.245, there is any wayes to connet device web base ??
View 4 Replies View RelatedTP-Link ADSL2+ Wireless :: W8970 Print Server - Can't Add Printer In Control Panel
May 7, 2013Region : Others
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :
I am struggling to get a printer added through the print server. The printer is set up in the TP-Link USB Printer Controller and selected as the auto-connect printer. I can scan through the server, but can't add the printer in control panel or see it as a option when printing. The printer is a Samsung SCX-340F.
Linksys Wireless Router :: WRT54G To Transfer Admin Control Panel From Old Computer
Dec 30, 2011When I first installed my wireless router a few years ago, I did it with my old computer which has Windows XP as its operating system. It is on this computer that the Linksys "admin control panel" is installed, which allows me see what computers are connected through the router, see what the settings of the router are, etc. I recently purchased a new computer which has Windows 7 as the operating system. As I transfer programs and documents from my old computer to my new computer, I have run into the problem of how to transfer the Linksys "admin control panel" from my old computer to my new computer. The original installation CD for Linksys won't work with Windows 7 so I don't even have that as a starting point. I tried going to the web-based admin site, but can't access it from either computer.
View 8 Replies View RelatedCan't Get To My Control Panel
Aug 12, 2012I can not get to my control panel. I have tried 192.168.1.1 and 192.168.0.1,. I do have it flashed with DD-wrt. I can access the internet with it, the lights look correct, I don,t believe it is bricked. I have tried hard reset and soft reset.
View 5 Replies View RelatedNetgear N300 Control Panel Does Not Ask For Login
Dec 15, 2011I set a password and everything on my n300's Netgear Genie, but every time I go to routerlogin or 10.0.0.1, it just shows me the full control panel and never prompts me to log in. Isn't security a bit too lax over there? I even click log out and it says i logged out, then I re-visit and I'm always automatically logged in.
View 3 Replies View RelatedLogin To USR9108 Router Control Panel?
Feb 7, 2011Here is the setup: A US Robotics USR-9108 router is connected to an ADSL modem via ethernet cable. The modem, upon connecting with the ISP, provides a gateway address of 192.168.1.1 to the router. End-users including me connect to the internet through the router via WiFi and are assigned the IP 192.168.1.2...192.168.1.255.
When disconnected from the modem, I can access the control panel via 192.168.3.1 but once the ethernet cable is plugged in I cannot access the above-mentioned IP; connecting to 192.168.1.1 opens up the modem's control panel. Any possible way to access the router control panel while it is connected to the internet?
Linksys Cable / DSL :: Control Panel Crashes Wag54g2?
Feb 26, 2011when i enter 2 Access Restrictions & add put some data After a period of time Control Panel crashes
View 6 Replies View RelatedLinksys Cable / Dsl :: X3000 - Check Control Panel To See Webpages Viewed On Wifi Connection
Apr 6, 2013i have a linksys x3000 router, is there anyway of getting into the routers control panel to see the previous webpages that have been viewed over the wifi connection?
View 3 Replies View RelatedWireless Network Not Appearing?
Sep 3, 2011Our wireless network with a security password is not being recognised in the list of available wireless connections. I can see it in the list of networks in the Control Panel but it is not being listed in the available network list . We can connect directly to the router but there is no security password and I would eithera. like to assign a password to the connection (NetGear) orb. be able to connect to our original network listed in the control panel.
View 1 Replies View RelatedUnable To Give Windows Control Over Wireless Connections?
Dec 15, 2011I have a Toshiba Tablet PC that came with the configfree software. It worked fine for a while but then it started giving connectivity problems. I tryed to disable Configfree by all means possible to no avail. Then I decided to uninstall it successfully, but I still can't return the network connections control to windows. It seems like it is still under configfree. My guess is that some internal switch at the registry level is still saying that the wireless control is not windows.
View 1 Replies View RelatedLinksys Wireless Router :: EA6500 Devices Not Appearing In Network Window?
Jan 31, 2013We purchased an EA6500 to take the place of the router function of a Verizon Westell 7500. We bridged the Westell, installed and set up the EA6500 and everything seems fine.
What is strange is that some devices on the network (our server, user PC, a NAS that isn't part of the domain) while accessible if you navigate to them via \ do not appear in the Network window.
This of course is causing issues for some users who don't or won't map network drives.
At first I thought this may be an issue related to us having some of our network devices with static IP addresses so we switched them over to dynamic - no change in the network window.
we will have to return this router and get a different brand/model if it won't work in this fashion.
TP-Link 300Mbps Wireless :: TL-WR1043ND - Configure Parental Control To Allow VPN Connections?
May 3, 2013Region : Europe
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
Region : Germany
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version : 3.13.13 Build 130428 Rel.58290n
ISP :
I'am a user of perfect-privacy.com (who provide VPN access for safe internet usage) and want to force the users of my internet connection to use perfect-privacy. On my old router i only allow access to the domain *.perfect-privacy.com and deny all other domains. To surf the web it was nessesary to connect via VPN (example server: moscow.perfect-privacy.com) to surf the web.
I've tested the Parental Control, but when i have activated it, i can access perfect-privacy.com, but i can't open a VPN connection to a Perfect Privacy server. Is there any way to configure Parental Control to allow VPN connections, or realize me needs in another way?
Several Unknown Devices Appearing On Network
Jul 31, 2011After getting unusual IP conflicts on my laptop, I did a scan of my home network with a program called Zamzom and got the following results:On my Macbook I used a similar program and got more than 40 devices showing up: Neither program says which devices are active. The Mac results bring up BlackBerrys among other things. I upgraded my security from WEP to WPA2, but nothing changed. I use NOD32 and recently installed AdAware, which picked up a few things, but again, results are the same.
View 7 Replies View RelatedHome Network :: Switch Need To Be Located Where Patch Panel Is
Sep 18, 2011I am renovation my own house, and I have started to hard wire for the network/s, but I am also trying to incorporate so much more than any previous “wireless” setup I have had, well I am a bit confused to say the least.I would like to set up a home network and media server system which includes:Internet browsing (multiple rooms and wireless) File sharing, printer sharing, scanner etc Music/Video sharing/streaming, TV etc.I have started wiring (we are renovating) with Cat5e, and have just replaced the old POTS (telephone) wiring with Cat5e and taken the individual telephone wires (including the incoming telephone cable) back to one central connection unit in a network patch panel. This has improved the speed of my DSL download connection speed from 1.2mbs to 6.2mbs. unreal!, so that did get me a bit fired up!I am currently wiring data points (Cat5es from each room) back to the same panel, but to be honest I am not really sure where to go from there! Also, I have wired Sat cables back to this point ready to be connected to sat TV (dish) in case if we get it. This patch panel is in a small passageway that goes through to the garage from the house. It is conveniently located next to the mains board which I have just replaced. My original idea was to put any extra needed equipment in the same location, but looking at it, I think that I may have to think again, for there is little room. I have found a small alcove in the upstairs games room which has a shelf, and which could take any hardware, also it will be dust free (unlike the place leading to the garage). I can run as many cables as needed from this location to the patch panel, but obviously I would like to know how many, as I am not familiar with networking on this scale, my only other experience being wireless setups. For example, would the switch need to be located where the patch panel is, or else can it be on the shelf with the other stuff? (away from the panel), and the existing D-link 4 port router?? is this no longer required?Im presuming i will need an old PC or some sort of media storage device here too... no ideas with this either. Have tried asking three different computer stores, got three different answers...?!
Have I dropped a clanger wiring to the passageway, when infact any server/switch or whatever wont be in the same location?Also, I am planning on getting a MAC book, and would like to use this on the system sometimes (might not be relevant), just thought to mention. And, I was thinking of trying Linux, as I am fed up with all the windows problems. But not sure if that is a good idea either.We have TVs in the (when its finished) media room, also three other areas, which I would like to get connected so that they will be able to get either TV or watch a film from storage wow this is getting complicated and if it matters I do have a PS3, which we only really bought to use as a TV storage system/recorder.
Cisco Wireless :: WLC AIR-WLC2106-K9 With 2 X Aironet 1131ag Not Appearing
Oct 3, 2012we have the WLC and 2 x Aironet AP's that is powers over PoE. The other day is was reloaded and since then the AP points are Blinking Red, according the the Aironet manaul this means some sort of boot error? They are also not appearing on the WLC from the GUI or CLI running a show ap summary. Interesting though I can see them via CDP, however they are not picking up IP's as they are listed as 0.0.0.0. After checking with colleagues I was told these were set statically.
Is it possible that the points not having IP addresses is a sign of a corrupt boot environent? I would have though they would not have appeared in CDP if they were corrupt?
I did not set this up in the first place so a little puzzled at the moment? Nothing has changed on the config bar using a different NTP server on the network?
Linksys Wireless Router :: E4200 - Folders Appearing In Mac As Alias And Inaccessible
Dec 26, 2011I have a new E4200 (running FW 1.0.3) and connected a Seagate GoFlex 1TB drive to it. The drive is recognized fine by macs and PCs. However, I find random folders appearing in my mac finder as "alias" and hence innaccessiable. There are a bunch of them scattered in random areas. On Windows those items appar as an unrecongnized incon, a 4KB size and Type file with the "archive" option checked under File "Properties". On a mac they appear as kind "alias" with a 4KB size.I also didn't notice any particular oddities with the directory name (I.e no special chars). I tried renaming them and that didn't fix it.
View 3 Replies View RelatedLinksys Wireless Router :: E4200 Control On / Off Time Of Entire Guest Network
Sep 22, 2011Can i control the on/off time of the entire guest network?Or can use parental control for computers logged onto the guest network?
View 1 Replies View RelatedRouter Appearing As One Device?
Nov 13, 2011The network I am currently using only allows one device to be connected at any one time, regardless of whether you use a switch or not. Could I connect a router to the wall socket and then use multiple devices with the router? In theory the router should only appear as one device in every aspect even with several devices using it, correct?
View 5 Replies View RelatedLinksys Wireless Router :: Where Is Advanced Settings Panel In EA6500
Oct 28, 2012I want to know where I can edit advance settings of my EA6500. Cisco Clout Connect is too basic for my taste.
View 1 Replies View RelatedLinksys Wireless Router :: Admin Panel - Logs And VPN Formation?
Aug 11, 2012As I've seen in my Linksys' admin panel, I have a log option (Administration/Log). So if I enabled it i can check which sites was browsed in my home network?And the second question: if Linksys can store the browsed sites history and if I will use a VPN connection on my PC or iPhone (not router!) the logs will be still look like before setting-up VPN on PC? So like: [URL] not like: [URL]?
View 3 Replies View RelatedNo Wireless Connections To Nas In Network
Aug 22, 2011I have a NAS connected to my network and all the computers/laptops can use it if connected via the ethernet (all use various operating systems, no static ip's). as soon as I try and use them on the wireless none of them will see the nas, they are all connected to the network and can use the internet, just no connection to the nas.My Router Ip is 192.168.1.1 and my nas IP is 192.168.1.254, I have tried setting the nas to automatically getting an ip from the router aswell but this still doesn't make any difference.
View 7 Replies View RelatedRed X In Wireless In Network Connections?
Dec 5, 2011I lost connection to the wireless.I cannot find any wireless networks, which is obviously incorrect. The switch is plugged in. I can plug a cat-5 in and run fine. I can connect to the wireless with other machines fine. Something is up with this computer. I use Virtual Boxes on here and see that there is a "Virtual Box Host Only Network" that I've never noticed.I've disabled this but my wireless is still not finding anything.
View 5 Replies View RelatedWLAN Light Not Appearing On Router?
Oct 9, 2011Well, I recently purchased a new ipod Touch for my birthday and planned on using Wi-Fi internet for my touch when I'm around the house. My sister had a router that had not before been in much use, the WRT54G Linksys router; so to save money we decided to use that. Well, we plugged in the router on October 7th, (friday) and everything was working -- we had Wifi connection; the WLAN light on the Linksys router was lit up. Now, last night, October 8th, right before going to bed I shut down my computer and I unplugged my computer cable. I did not unplugg the router. This morning, as soon as I turned back on my computer, as soon as it was done booting up I noticed the WLAN button on the router was not lit up. I immediately pulled out my ipod and it said that I was not connected to Wifi. All day I have been unplugging the router/modem, replugging them in, only to find that the WLAN button is still not lighting. The other buttons on the router - 'power', 'internet', and '1' (out of 1, 2, 3, 4) are lit. I have only tried rebooting the modem/router/computer once, which was about ten minutes ago and still nothing worked. Is there any way to get my Wifi back? The router is pretty much brand new, having never really been in use to begin with.
View 3 Replies View RelatedCisco :: LMS 4.1 - No Syslog Messages Appearing?
Sep 28, 2011LMS 4.1 is not showing any valid syslog messages, only invalid messages. Is there anything different in 4.1 that needs to be set?
View 2 Replies View RelatedLinksys Wireless Router :: WRT120N - Can't Access Admin Panel From Other Computer
Dec 16, 2011Before, I can access admin panel of router via 192.168.1.1 on any computer, be it wired or wireless.This time, I can't anymore.This time, I can only access admin panel on 1 computer only. The computer in which it's directly connected to the router, wired. All other computers, connected to a switch, which the switch is also connected to router, can no longer access admin panel.I can still open 192.168.1.1 with a username/password prompt but I can't log in. It's like it's always wrong password. Same with accessing from laptop (wireless).Before, I can access admin panel from any computer (wired), even from laptop (wireless). There are times that I have to restart router in order to fix my internet connection. Only this time, I have to access it from the computer that's directly connected to router (wired).How do I revert it back so that all computers will be able to connect to admin panel of router?I have just finished upgrading firmware from 1.0.05 to 1.0.06 but I still have the same problem.
View 5 Replies View RelatedCan't See Wireless Network Connections After OS Reinstall
Jul 4, 2011i have a Dell Latitude D810. I just wiped and reinstalled the OS. i have updated everything from windows update including chipnet,.Net, flashed the bios, and did a scan, and updated drivers. i have tried to update drivers from the original CD.problem: I cannot seem to get the computer to realize it has an internal network card. there is no switch on laptop. i have tried manually updating drivers, performing scans, etc. when i go to Dell website, it says to go to network connections, and click on the Wireless Connection to set it up, but that option is not there (only LAN). i am on internet through LAN but cannot see anything wireless to set up.when i am finally able to see wireless options, i want to connect to my existing network, so i do not need to set up a new network.
View 8 Replies View RelatedGet Rid Of Truelife Page Appearing When Open Google?
Apr 23, 2012Truelife always takes over my homepage instead of google opening up
View 2 Replies View RelatedLinksys Wireless Router :: EA6500 Configuration Panel To Proceed With Cloning MAC Address
Jan 13, 2013I am going to replace my Netgear DGND3700v2 router with Linksys EA6500. I hope that the signal strength of this router will be better, particularly for 5GHz.The problem is that I have a cable connection to Internet and my line has MAC address of Netgear assigned by my ISP. I would like to clone this address to EA6500 to test the power of the signal, before making the final decision to replace Netgear.My question is how to do this in off-line mode. I cannot have Internet before cloning.I've been using Internet Explorer with various addresses - 192.168.0.1; 192.168.1.1; myrouter.local; even 192.168.2.1 and some others but couldn't get connected to EA6500. Of course, the original CD suppied with the router does not work, either.Is there any other way to get to router configuration panel to proceed with cloning the MAC address?
View 1 Replies View RelatedWireless Network And Ethernet Connections Not Working?
Jul 28, 2012My computer is a Dell Inspiron with Windows 7 Home Premium Service Pack 1. A few weeks ago, it stopped working and would not let me log in. I fixed that problem by launching Setup and downloading the Windows 7 installation from a jump drive. The new problem is that I cannot connect to the internet at all. My wireless connections will not show up and when I hook up my ethernet cord, it will not show up either.
View 10 Replies View RelatedNo Wireless Connection Listed In Network Connections
Mar 2, 2012I recently had to reinstall Windows XP on my Panasonic Toughbook but when I did, I now don't have any way of getting a wireless internet connection. I don't see the wireless card in the hardware list and there's no wireless connection listed in the network connections. (This laptop came with Vista Business but I wanted XP since I'm more familiar with it.)
View 1 Replies View RelatedDSL-2520u - Stop Configuration Page From Appearing On WAN / Accessible Only From LAN
May 9, 2012I have a D-Link DSL-2520u ADSL2+ modem. When I access the page 192.168.1.1, it prompts for a username and password. Upon successful authentication, I see the modem configuration page.
If I am on a different network, I can also access the modems configuration via its public IP address.How can I restrict access to the configuration page via the public IP address and only allow access via the internal IP address?