WLAN Light Not Appearing On Router?
Oct 9, 2011
Well, I recently purchased a new ipod Touch for my birthday and planned on using Wi-Fi internet for my touch when I'm around the house. My sister had a router that had not before been in much use, the WRT54G Linksys router; so to save money we decided to use that. Well, we plugged in the router on October 7th, (friday) and everything was working -- we had Wifi connection; the WLAN light on the Linksys router was lit up. Now, last night, October 8th, right before going to bed I shut down my computer and I unplugged my computer cable. I did not unplugg the router. This morning, as soon as I turned back on my computer, as soon as it was done booting up I noticed the WLAN button on the router was not lit up. I immediately pulled out my ipod and it said that I was not connected to Wifi. All day I have been unplugging the router/modem, replugging them in, only to find that the WLAN button is still not lighting. The other buttons on the router - 'power', 'internet', and '1' (out of 1, 2, 3, 4) are lit. I have only tried rebooting the modem/router/computer once, which was about ten minutes ago and still nothing worked. Is there any way to get my Wifi back? The router is pretty much brand new, having never really been in use to begin with.
View 3 Replies
ADVERTISEMENT
May 18, 2012
Yesterday the WLAN light stopped lighting up on my wireless router. The DSL light comes on (green), however, the WLAN light doesn't light up and the 'inetrnet' light stays on red. My laptop is saying cannot detect network, but is detecting other wireless networks in area (so not laptop prob). Did all the unplugging, turning everything off and even pressing the reset button on the back of the router but its still not working. Tried plugging in a USB cable directly from router to laptop and 'internet' light flashed green for 1 second then went back to red and still not working.
View 1 Replies
View Related
Jul 22, 2011
I previously asked if I should be concerned that the Internet light on my Linksys E3000 router doesn't light up when I have Internet access. Well recently I had to do a reset and I noticed that during the reset it does in fact light up, but it doesn't come on when the router is done with the reset!
View 1 Replies
View Related
Nov 13, 2011
The network I am currently using only allows one device to be connected at any one time, regardless of whether you use a switch or not. Could I connect a router to the wall socket and then use multiple devices with the router? In theory the router should only appear as one device in every aspect even with several devices using it, correct?
View 5 Replies
View Related
Jan 31, 2013
We purchased an EA6500 to take the place of the router function of a Verizon Westell 7500. We bridged the Westell, installed and set up the EA6500 and everything seems fine.
What is strange is that some devices on the network (our server, user PC, a NAS that isn't part of the domain) while accessible if you navigate to them via \ do not appear in the Network window.
This of course is causing issues for some users who don't or won't map network drives.
At first I thought this may be an issue related to us having some of our network devices with static IP addresses so we switched them over to dynamic - no change in the network window.
we will have to return this router and get a different brand/model if it won't work in this fashion.
View 9 Replies
View Related
Dec 26, 2011
I have a new E4200 (running FW 1.0.3) and connected a Seagate GoFlex 1TB drive to it. The drive is recognized fine by macs and PCs. However, I find random folders appearing in my mac finder as "alias" and hence innaccessiable. There are a bunch of them scattered in random areas. On Windows those items appar as an unrecongnized incon, a 4KB size and Type file with the "archive" option checked under File "Properties". On a mac they appear as kind "alias" with a 4KB size.I also didn't notice any particular oddities with the directory name (I.e no special chars). I tried renaming them and that didn't fix it.
View 3 Replies
View Related
Mar 2, 2011
I am trying to light up every port light on a 3750g. There is not anything plugged into them and I would like to know (just for fun) is there a way to make every port light 1 - 48 turn on using a command?
View 3 Replies
View Related
Sep 3, 2011
Our wireless network with a security password is not being recognised in the list of available wireless connections. I can see it in the list of networks in the Control Panel but it is not being listed in the available network list . We can connect directly to the router but there is no security password and I would eithera. like to assign a password to the connection (NetGear) orb. be able to connect to our original network listed in the control panel.
View 1 Replies
View Related
Jul 31, 2011
After getting unusual IP conflicts on my laptop, I did a scan of my home network with a program called Zamzom and got the following results:On my Macbook I used a similar program and got more than 40 devices showing up: Neither program says which devices are active. The Mac results bring up BlackBerrys among other things. I upgraded my security from WEP to WPA2, but nothing changed. I use NOD32 and recently installed AdAware, which picked up a few things, but again, results are the same.
View 7 Replies
View Related
Sep 28, 2011
LMS 4.1 is not showing any valid syslog messages, only invalid messages. Is there anything different in 4.1 that needs to be set?
View 2 Replies
View Related
Apr 23, 2012
Truelife always takes over my homepage instead of google opening up
View 2 Replies
View Related
Nov 3, 2012
problems with laptop, one of which is i am unable to get wireless connection again, no network connections are appearing in control panel?
View 5 Replies
View Related
Oct 3, 2012
we have the WLC and 2 x Aironet AP's that is powers over PoE. The other day is was reloaded and since then the AP points are Blinking Red, according the the Aironet manaul this means some sort of boot error? They are also not appearing on the WLC from the GUI or CLI running a show ap summary. Interesting though I can see them via CDP, however they are not picking up IP's as they are listed as 0.0.0.0. After checking with colleagues I was told these were set statically.
Is it possible that the points not having IP addresses is a sign of a corrupt boot environent? I would have though they would not have appeared in CDP if they were corrupt?
I did not set this up in the first place so a little puzzled at the moment? Nothing has changed on the config bar using a different NTP server on the network?
View 1 Replies
View Related
May 9, 2012
I have a D-Link DSL-2520u ADSL2+ modem. When I access the page 192.168.1.1, it prompts for a username and password. Upon successful authentication, I see the modem configuration page.
If I am on a different network, I can also access the modems configuration via its public IP address.How can I restrict access to the configuration page via the public IP address and only allow access via the internal IP address?
View 1 Replies
View Related
Jun 27, 2011
The Cisco 2821 ISR's in our environment are listed under device management (Inventory>Device Administration>Add/Import/Manage Devices), but do not appear in the menus for inventory collection, archive synch, or net config. All are running IOS. No other routers or switches in the environment are displaying this symptom in LMS.
View 5 Replies
View Related
Dec 27, 2011
I was browsing through a blog website (tumblr), and I noticed that several images looked VERY distorted and bizarre.[URL] This started continuing as a scrolled through my dashboard, and even .gifs were affected, also becoming very distorted like flashing white and having broken parts to it. At first I thought it was a problem with just the website, but after asking other people who said they were fine and browsing through other sites, I noticed that the problem wasn't just that. It even looks like it's affecting your website's banner. [URL] The browsers I tried this with are Google Chrome, Firefox, and Internet Explorer, all of them having the same problem. Also on several websites like tumblr, youtube, yahoo, etc. I even get times where it looks like I see bits or large chunks of html on the page, as if those are broken too. Now, the strange part is all of my images that I have saved to my hard drive and all of my gifs, etc. are working completely fine, and I can view them with no problem. Images on the internet, however, are very distorted. This is also happening to several images, not every single one of them. Then I thought that my laptop could be infected with a virus, but I performed multiple virus scans (Windows Defender which I know isn't that good, a Norton antivirus scan, and an Avast scan.) All scans said my computer was completely clean and free of threats. I had also gone through my computer's display settings and all of that just to see, even though I had never touched those. Everything looked to be fine from what I saw. And now starting yesterday, the problem has mysteriously spread to my iPod touch (2nd gen but it still works fine), with images that I view online also having the same distortion problems.
I was only able to rule things out to the internet connection now. Now, what's odd is I was at first trying this on my iPod, but I went and connected to the wireless network of a neighbor, and images on the iPod actually looked restored. Then after trying it on my laptop and going on my browsers, the images were strangely distorted again... I then went and cleared the cache and cookies (not including the history), and that actually managed to do SOMETHING. The images that were distorted on my browser were restored, but then OTHER images and .gifs became distorted. (Also as a side question, is it the end of the world for me if I erase my cache on cookies while on a website? I heard from people that you shouldn't delete your cache if you're on a website, but I didn't know about that at first... Of course, I don't think it made things worse, since the problem was still present before I deleted it.) Clearing the cache on my ipod's internet also seemed to have the same effect as with my laptop and its browsers... Also clearing the cache several times only went only caused the same thing, with some of the restored images from before going back to being distorted.
View 12 Replies
View Related
Oct 6, 2010
I'm having an issue with a Cisco 2811 ISR Router. Sh ver command output lists the correct ios that the router used for booting and it says that the ios is stored in flash but when i give "sh flash" command it doesn't display the ios file. Maybe the flash is corrupted or damaged in some way? In the attached file is the output from the "sh ver" and "sh flash" commands.
View 6 Replies
View Related
Jul 5, 2012
We run a network of several 2960G and 3650G switches in a network with a number of VLANs. One one particular VLAN (let's call it VLAN 10) it appears that non-broadcast traffic (i.e. normal unicast traffic) is being copied to every port in VLAN 10 only on one switch . The traffic is not crossing trunk ports and does not appear on other switches that have ports in VLAN 10. We first spotted this by noticing that a UPS port had an unusual amount of activity on our port througput graphs:
This traffic at 4 am is not expected and this profile is repeated across all ports in VLAN 10 on this switch (a WS-C2960S-48TD-L stack running IOS 15.0(1)SE3)\iffed one port using local SPAN (the UPS port) and discovered that this traffic was not broadcast, which was running at a normal low rate at all times. The traffic appeared to be unicast traffic from other ports of the sort you might see on a hub. It was from various hosts that live on VLAN 10, most (not all) of the conversations had one end station homed on the 'problem' switch. There are about 800 non-broadcast packets per hour and this is a busy VLAN so it does not account for all the traffic on the VLAN.
View 3 Replies
View Related
Jun 10, 2013
I would like to setup a 2504 to have one Guest WLAN and one Staff WLAN with a controller port for each WLAN connected to different devices.
I would prefer to connect the WLC Guest port to an ASA 5510 and the WLC Staff port to an internal 2960S switch. Will this work? I haven't setup a 2500 series controller previously.
View 4 Replies
View Related
Jul 31, 2011
So, I messed around with my router a little too much and just want to restore it back to the original firmware now. I have a WRT54GS v7 Linksys router and tried to follow this guide to flash the firmware to something a little more useful. After step 7 of that guide, I can't ping my router, can't access the GUI, and have no idea what my router's IP is. If I assign each computer plugged into the router an IP like 192.168.1.2 I can ping them, so the router is still functioning somewhat. I'm plugged into my modem right now to get on the Internet.
Right now, my power light is off, my DMZ light is off, my WLAN light is off, but the other lights turn on if I plug a cord into its port (plug a computer into port 1, port 1's light comes on). When I do an ipconfig /all i get this. I doubt the web interface still works, but if I could at least get the router's IP, couldn't I use tftp and put the firmware on that way?
View 3 Replies
View Related
Apr 26, 2012
I have a 1921 router with a V.2 T1 wic installed connected to a MPLS circuit. The circuit is down hard and the CD light is flashing. We reseated the WIC card and the circuit recovered for about 30 seconds, then went down and CD began flashing again on the WIC. AL is solid.
View 1 Replies
View Related
Dec 12, 2011
I have a new TEW-692GR router attached to an UBEE DVM3203B cable modem. For the last several days the WAN light on the router and the LINK light on the cable modem flash on a continual basis. This seemed to happen after establishing a wireless connection between a new LG smart tv and the router but am not sure if that in fact caused the issue. I have power cycled all devices on my network in an attempt to clear this up but no joy.
View 2 Replies
View Related
Jun 3, 2011
every now and then my Belkin brand router will just switch from green light, to red light. Sometimes unplugging it for a while fixes it, sometimes unplugging it for a LONG while fixes it, sometimes prayer and chanting fixes it. But most of the time the red light sits there mocking my efforts.What's making this happen? Is it my wireless security settings? Because I used to try and fix it by pressing/holding down the WPS button.
View 4 Replies
View Related
Dec 13, 2012
My router suddenly seems unable to connect to the internet through my modem. I've been troubleshooting it for a couple days now and nothing seems work.My router and modem both work perfect, individually.Connecting a cable from my modem to my PC lets me get online.Connecting a cable from my modem to my router doesn't work, link light remains off. [code]
View 1 Replies
View Related
Jan 31, 2013
I have a netgear MR814 router that is not connecting to the internet. A few days ago my wireless was SO slow that I disconnected and did a powercycle (which usually works when wireless drops off now and then) but then it did not connect to the modem anymore. The ports 1, 4, wireless, and power lights are on but the internet light is off. I know it's not a modem problem because I can hardwire the modem to my laptop and get on internet. I've tried a few things suggested on this forum and elsewhere (maybe I shouldn't have messed with it?) but nothing has worked to resolve the problem. When I am connected to the router I cannot access the routerlogin and the ipconfig/release/renew shows that wireless lan media is disconnected.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 3893 Mb
Graphics Card: Intel(R) HD Graphics, 1722 Mb
Hard Drives: C: Total - 458067 MB, Free - 369650 MB; D: Total - 14607 MB, Free - 1626 MB; E: Total - 4055 MB, Free - 1103 MB;
Motherboard: Hewlett-Packard, 1693
Antivirus: avast! Antivirus, Updated and Enabled
View 5 Replies
View Related
Oct 6, 2011
After a recent lighting strick close by I can not connect to the internet through my router. Stright from the modem works fine. The port light on the router does not come on. I rebooted modem, router and computer with no luck. It's like I've lost my network adapters and I don't know how to get them back. I tryed another E2000 and it's the same way.
View 1 Replies
View Related
Dec 4, 2012
Just bought the linksys E2500 as an upgrade for a my Trendnet 150 wireless N router. I have a motorolla surfboard modem with time warner roadrunner cable internet. After connecting the router I have no internet connection. I do not get a light on the WAN connection after the ethernet cable is attached. I know the light works because when I power it on all the lights come on. I cloned the MAC address but this did not work. I have searched the forums for hours and tried different ideas to no avail. My PC recognized the router and I'm able to get to all the settings but cannot establish a connection from the router to the modem. I also tried different ethernet cables to eliminate that possiblilty.
View 4 Replies
View Related
Jun 25, 2011
The Internet LED does not light up when I have access to the Internet like now. I think I remember this lighting up in the past and find it strange that an LED light would burn out so early
View 5 Replies
View Related
Jun 22, 2012
Reset button pushed in, unplugged won't reset it. I get my default name on connections but it's not showing as available connection.
View 7 Replies
View Related
Jan 24, 2009
Ive recently tried to update the firmware and everything went as instructed, then the power and LAN light went out. Now I have the indicator lights for the computer and modem, but thats is. No internet or SSID broadcast. I cannot log into or ping the unit, and have tried the hard reset many times, with no effect.
View 8 Replies
View Related
Dec 5, 2011
I just purchased the E4200 (hardware version 1).Great router with amazing features.I plugged my WD Elements 2TB, setup my media and FTP server and everything is working fine.
My only concern is about the HD light that is always on, even when nobody is accessing it. I turned off the Auto-scan option but the HD seems to be always reading something...
When this HD was plugged on my computer the light was on during access only.Is it OK? I mean, isn't something that will decrease the HD lifespam? Is there a way to tell the E4200 to not access the HD when nobody is using it?
View 2 Replies
View Related
Aug 21, 2012
I have a Thomson TG784 router and i have a problem with it. once i turn on my rouet, and no cables are plugged in, except the power one, the two lights start blinking. The Power and the Ethernet ligh blinking. Once i connect my Ethernet cable and my DSL cable, the light are still blinking with no changes... What should i do?
View 1 Replies
View Related
May 31, 2012
For the past year or so, 5-6 times a day my router's green internet light will turn red, needing a reset... 99% of its usage is through wired connections and this is the only router in my home.
View 1 Replies
View Related
