Linksys WRT54G / LAN Not Working Except For One Computer?
Aug 26, 2011
Three computers (two laptops - both XP, one desktop - XP) suddenly couldn't access the Internet through LAN (the Local Area Connection icon always stays disconnected with the three computers) after working perfectly fine for months. The thing is one desktop computer - XP still can connect through LAN and the wireless connection is still working. So I don't know if the problem is with the computers who can't connect through LAN or the router itself, a LINKSYS WRT54G.
View 2 Replies
ADVERTISEMENT
Apr 4, 2012
I have a Linksys WRT54G to which 2 computers are connected of which one has no problems at all.The other computer just had its hard drive replaced and Windows XP Pro SP1 installed on the new hard drive. With the new operating system, I cannot get the computer to access the router. The connection status reports that the network device is working but IPCONFIG /ALL reports nothing (blank). The NIC is onboard the motherboard (ASUS P5LP-LE). I have swapped out cable ports at the router and tried a different cable to the faulty computer to no avail. If I had a spare NIC I would already have tried that too. FYI, it was working without problems prior to the hard drive crash that prompted the new drive and OS install.I tried a wireless USB network interface (Zonet ZEW2508) and the computer also reports it working. However, the network icon continually cycles between connected and unavailable, about 6 seconds connected and 1 second unavailable. IPCONFIG also reports blank on this.
View 11 Replies
View Related
Apr 29, 2008
I have a WRT54G wireless router ... I want to connect a new laptop through it ... but I need either a network key or a password ... cant locate these ..
View 8 Replies
View Related
May 8, 2012
It constantly disconnecting and wouldn't stay connected for a long period of time, so I tried messing with the settings and it no longer connects to the internet. It tells me that the settings for this router is not compatible for the computer settings. I have reset the router to its factory settings, restarted the computer, restarted the router but nothing changed. I have tried plugging my computer to the router via ethernet cord and typing in 192.168.1.1 in the address field of Internet explorer and nothing comes up. I also forgot the password to the router!
View 1 Replies
View Related
Jul 14, 2007
Am trying to set up a laptop computer to my wireless network (WRT54G V6)
View 9 Replies
View Related
Aug 22, 2011
I am using a LinkSys Model: WRT54G Version: 6 wireless router configured to use WEP.I have two computers, the main desktop and a laptop for mobile operation.How do I configure the LinkSys to allow the laptop to access a external (mapped) USB drive on the desktop?
The laptop can access the mapped drive on the desktop when it is hardwired to the LinkSys (i.e., not wireless) but I cannot find a reference in the Pdf manual or online on how to access the drive on the desktop from the laptop when the laptop is connected via the WiFi.The desktop is running XpSp3 and the laptop is Vista.A second and more important question is should I do this. Can the accessing of the drive via the WiFi be done with adequate security. I would rather err on the side of caution.
View 4 Replies
View Related
Nov 1, 2012
called my internet company yesterday with a problem that my internet was not working.. so we went through some steps and basically he had me remove the wireless cord from the router put it into my computer (at the time it wasn't working via that either) and reset my ip, it started working after that and he just said I must've gotten a faulty ip. Now it still won't get internet from my router, we all have laptops in the house so wifi is essential. The internet light on the router still blinks green.[CODE]
View 15 Replies
View Related
Aug 28, 2011
So I have a WRT54G router since a couple of years now. Laptop (Win7 64bit), ipod, ipad, phones can connect to it without a problem, but new computer (Win7 64bit) can't. I can connect the PC via ethernet without a problem though.
I powercycled my devices, I changed broadcasting options off and then back on, changed my security mode, tried the MAC Cloning (after doing the MAC Cloning, I lost internet connectivity even through ethernet), resetted my security settings, changed SSID, I'm broadcasting through channel 11 2.462. I also tried deleting the HomeGroup
Important fact: the network is in the list of available wireless network, but Signal Strength is No Signal and I can't connect to it. My network adapter is ASUS 802.11n Wireless LAN Card, drivers are up to date. I've upgraded to the latest router firmware.
[Code]....
View 4 Replies
View Related
Oct 17, 2011
I am having problems connecting to my wireless internet. We were getting a poor signal so we moved our router to our living room where we always are, but now we can't connect. We tried resetting everything, turned on and off several times. Went to the linksys wireless set up page, changed SSID and password. Still can't connect with the computer or our iphones. It shows our SSID is there but won't connect. My internet when plug directly to the computer works fine (I am using it now). My computer can connect to the router Linksys WRT54G, we just can't get it to connect to the wireless.
View 1 Replies
View Related
Sep 22, 2011
Running Comcast Business Class in my restaurant. I have a Mac Pro PowerPC G5 tower running OSX: 10.5.8. The Comcast guy hooked everything up along with the WRT54g i found in the basement (previous owner). Everything worked well, he programed the router through his internet pad; never touched my Mac. All of a sudden my power outlet in which my modem and router are connected reset themselves. I reset them back on, however, my router Never worked again. My mac is directly connected to my modem, not router. I have it hooked up on LAN #4 (light turns on), however, after the outlet reset, the router wont even show up on my Modem's LAN. I cant open it open it on my browser, 192.168.0.1, or 1.1. I try the 30-30-30 reset, nothing. While looking for my own remedy, i think i downloaded the new firmware to my mac, nothing happened.
View 1 Replies
View Related
Apr 1, 2012
Linksys WRT54G wireless router is not working on my laptop. It is telling me this statement: ”The settings saved on this computer for the network do not match the requirements of the network.”
View 1 Replies
View Related
Feb 7, 2012
I have tried everything I know. My router is about 4 years old, so it may be time for a new one, but it has been working great, then it just stopped.
View 2 Replies
View Related
Feb 2, 2012
Last night, my wireless router suddenly stopped working. I no longer saw my router listed in my available wireless networks, and neither could my girlfriend from her computer. I unplugged the router to see if one of the available networks had disappeared in case my router had somehow been reset, and nothing changed so my computer isnt even seeing my router. Right now, I am wired through the router so I know the router works, but the wireless part doesnt for some reason. I was looking up stuff in the FAQ, and think the firmware is corrupted since the LEDs are all blinking. I was trying to update my firmware following the instructions I found using tftp.exe, however it failed. One problem is that I can't set up a static IP address since I need to access the web-based utility to check my DNS server but I cannot access the web-based utility anymore (maybe cause of the corrupted firmware?). On a related note, there is someone else in my building using a linksys with the default network name of linksys. I had changed my network's name and security-protected it, though that is all likely gone now since I tried to reset the router. My question is what will the network name of my router be if I saw it since "linksys" is already taken. or will there just be two of them?
View 1 Replies
View Related
Oct 19, 2007
I have WRT54G connected to a cable modem for internet service. Came home at lunch yesterday and all was working fine. Came home after work last night and couldn't connect to the internet. Called Charter cable this morning and their troubleshooting showed I can connect to the internet fine if I bypass the router, so the issue must be with the router (and of course not their problem...). How do I trouble shoot this? I've tried powering down the router and releasing and renewing IP addresses but it hasn't worked.
View 9 Replies
View Related
Apr 24, 2011
I have a Lynksys WRT54G wireless router. It works just fine until I try to put a password on it. I go through the basic steps, it talkes all my information and tells me everything is good. I try to sign on the internet and it tells me my password is invalid....and YES Im sure its the right password I entered. I went to http://192.168.1.1/wireless.htm and did all the necessary instructions, and still, it doesn't work. I can change my network name and it works. As long as I leave it unprotected, everything works fine, but when I add the password, it tells me its invalid. I even used 123456 so as to make sure it was the right one.
View 5 Replies
View Related
Dec 30, 2011
When I first installed my wireless router a few years ago, I did it with my old computer which has Windows XP as its operating system. It is on this computer that the Linksys "admin control panel" is installed, which allows me see what computers are connected through the router, see what the settings of the router are, etc. I recently purchased a new computer which has Windows 7 as the operating system. As I transfer programs and documents from my old computer to my new computer, I have run into the problem of how to transfer the Linksys "admin control panel" from my old computer to my new computer. The original installation CD for Linksys won't work with Windows 7 so I don't even have that as a starting point. I tried going to the web-based admin site, but can't access it from either computer.
View 8 Replies
View Related
Mar 24, 2013
I am running a Linksys Wireless G 2.4 GHz Broadband Router Model WRT54G. I am unable to open any ports. I upgraded to the latest firmware yesterday but still am unable to open any ports. I even turned off my Symantec Internet Security Suite Firewall but still am unable to open any ports.
View 1 Replies
View Related
Jul 17, 2011
I went online with a tech real quick before I found I beyond complimentary tech support. They say my router is working like a switch. I cannot get any wireless access and to the three direct connections to the router only one is working. The lights are constantly blinking, with the power light blinking every so often
View 1 Replies
View Related
Jul 25, 2011
I have the Linksys WRT54G And it was working fine for years! Then today my computer shut down and when I turned it back on there was a connection but my computer was not responding to any commands. The icon shows full connectivity excellent connection. When I try to go to a web page it shows Connection Error and cannot get to any web pages.I am able to get on other wireless connections from neighbors but not mine. I have gone thru different directions on here and I am not technical and don't understand what is being said. I try to go to 192.168.1.1 and it asks for a password which I don't have. I have tried everything such as password and admin and get nothing.I am able to get my ip address and default gateway address and don't know the next step.
View 1 Replies
View Related
Nov 1, 2011
I have wirless router WRT54G ver.2. and I had firmware 2.0 So I downloaded new firmware From Here and did exactly as in instruction.
After update went successful I unplaged my router for 30 seconds but it's not working. I mean it's flashes and everything but can't access it and it is not broadcasting. and whats most interesting, reset buttom is not working
Want can I do? can I access it with some other way and reinstall firmware?
View 8 Replies
View Related
Sep 8, 2012
I have 2 laptops in my home, I had no problem getting one to connect to the internet. The second one I'm having trouble connecting, I am wireless, I didn't have a problem at my old house with another laptop connecting to the internet with this router. I'm trying to save myself some money by not going through my wireless company, and end up having to get their router, which I already have their modem.
View 1 Replies
View Related
Jun 24, 2012
I have the WRT54G router for years and use it to provide both a wireless network for our home computers and a wired network for by internet phone that connects me to my office phone system and for my work computer and printer. Last week, the wired network stopped working. I checked the wiring and plugged my wire into all four of the ports in the back of the router with no success. I followed the troubleshooting procedure that I found and changed the MTU setting. I tried to update the firmware but the screen seemed to lock up and I was unable to complete the task.
View 9 Replies
View Related
Sep 28, 2011
I have had a WRT54G V3 router working successfully for a number of years now with a couple wireless PCs through a cable modem with Comcast as my ISP. All of a sudden yesterday, neither PC could access the internet. No changes had been made to the router.
I contacted Comcast and they of course had me hard-wire one of my PCs into the cable modem. That worked and I was able to access the internet. However, when I tried to put the router back in place (in either a wired or wireless fashion), I could not access the internet.
I've tried following the online Linksys troubleshooting document ion. The lights that should be lit on the router are lit. I can access the router setup web page which shows the settings still intact. I've tried going through the power sequencing to no avail. Comcast says my router is the culprit of my problem, but I don't know why it would all of a sudden stop working. My wireless printer still works so it detects a signal and my PC shows it's connected, but no internet access is possible.
What do I need to do? Are there any other diagnostic tools available? I'm out-of-warranty.
View 4 Replies
View Related
Mar 7, 2007
I am at my wits end.Comcast just changed my old RCA cable modem for an Arris Telephony modem.(I had Comcast phone service added)The tech that did the install said the wireless G network was all up and running. (My 3 other computers and printer) Well lo and behold the network does not work at all. I only get internet through my wired computer and cannot access my router through 192.168.1.1 anymore.I tried powering down the router and modem by holding the reset for 30 seconds and unplugging them.
View 9 Replies
View Related
May 31, 2012
I recently built a new computer and it runs a wired connection. I was having problems with dns dropping.until i set static ip and dns. But now whenever my computer is on my router doesn't broadcast a wireless signal and none of my devices can connect to wireless until I turn off my computer. The router is a linksys wrt54g2
View 4 Replies
View Related
Aug 12, 2008
wrt54g v1.1 After setting up the wireless router, I can use the internet on the pc as well as a wireless device. However after putting my pc in standby mode then back on, I can no longer connect to either. I have to restore factory defaults each time and re-enter all passwords and settings.
View 9 Replies
View Related
Mar 3, 2008
Last night, my wireless router suddenly stopped working. I no longer saw my router listed in my available wireless networks, and neither could my girlfriend from her computer. I unplugged the router to see if one of the available networks had disappeared in case my router had somehow been reset, and nothing changed so my computer isnt even seeing my router. Right now, I am wired through the router so I know the router works, but the wireless part doesnt for some reason. I was looking up stuff in the FAQ, and think the firmware is corrupted since the LEDs are all blinking. I was trying to update my firmware following the instructions I found using tftp.exe, however it failed. One problem is that I can't set up a static IP address since I need to access the web-based utility to check my DNS server but I cannot access the web-based utility anymore (maybe cause of the corrupted firmware?). On a related note, there is someone else in my building using a linksys with the default network name of linksys. I had changed my network's name and security-protected it, though that is all likely gone now since I tried to reset the router. My question is what will the network name of my router be if I saw it since "linksys" is already taken. or will there just be two of them?
View 3 Replies
View Related
Sep 10, 2011
So my new msi GT683r has an Intel Centrino Wireless N-130 card. It plays nicely with my newer N band routers, but it can't connect to my old WRT54G (no N obviously).
For some reason my computer can't connect a solid G signal. It connects and disconnects (Solid 4 bars one minute yellow triangle the next) seemingly frequently. Packets surge as well. I may send and receive 10k packets one time every minute or so, but no more than 150k or so.
I've troubleshot essentially everything I can, from upgraded drivers, resetting the router + new WPA, etc, and no go.
WRT54G works fine. All my devices are connected to it except my new msi laptop.
View 1 Replies
View Related
Jan 24, 2013
Background info:
Comcast cable internet and TV
Regular modem
Linksys WRT54G router
Windows7 desktop
The problem I'm seeing is that our wireless connection cuts out about 5 minutes after turning on our main desktop. Turn off the main desktop and wireless begins to work again. Throughout all of this, the wired connection works fine, and I have no problem connecting to the router either.
View 1 Replies
View Related
Jan 6, 2011
So I've noticed a big speed drop in my comcast internet. I went from routinely scoring over 20mbps on speedtest.net to around 11. Also, the upload test fails everytime. On every speed test site I've been to, the upload test completely fails. I haven't changed a thing so I have no clue why this would happen, but maybe it might have something to do with the speed decline.
I have an old WRT54G router that I've had for almost 10 years and I was thinking that maybe that was the problem. So I tried directly connecting my modem to my rig, but for whatever reason, I couldn't get it to work.
I can build unbeatable gaming rigs and program like crazy, but I just do not have networking in my skill set. It confuses the hell out of me and always seems to be completely random. What I can do to isolate and resolve my problem?
Oh, on one of the upload tests I got the following error.
"Trial measurement failed. Client can't send/receive UDP packs to server port 8601".
View 4 Replies
View Related
Feb 10, 2011
Two days ago there was a quick power outage here, just one of those flicks off flicks back on deals, but when it came back on I noticed my internet wasn't working. Couldn't figure out what the deal was so after trying a few other things I ended up eliminating my Linksys WRT54G router and just using my DSL modem. Internet works fine.
Now, I've always been kind of sketchy on networking stuff, but I don't think there router is broken I just think it's been reset or something and now I don't know what setting I need to change to get it back to working order.
Here's the kicker though. I had the DSL modem in bridge mode and the router handling traffic before but I had a huge issue with that where my Steam would only download at 10-15 KB/s. Not only that but it would take forever to login and crash constantly. This would happen on my brother's computer too, which is on the same network. I could never figure out how to fix it as forwarding ports had no effect and every other fix I could think of amounted to nothing as well. Hell, I even did a fresh install to no avail.
Now going straight into the modem my Steam is downloading at full speed and there's no slow login or crashing issues. The thing that boggles my mind though is that more than once before I tried doing this very same thing, going straight into the modem, and it didn't fix the problem.
Ideally I want to get the router back up and running and keep my Steam in full working order, essentially to have my cake and eat it too, but the priority is to get the router back up in running as I have another PC on this network, plus a 360, a PC, a wireless printer, and two Wii's.
View 10 Replies
View Related
Sep 20, 2012
My Dell laptop, iPhone, and iPad can all connect to my wireless internet. Recently my desktop showed "Connected" with strong signal strength but "No Internet access" and I haven't been able to connect since. I've run a complete virus scan (Mcafee) and nothing was found. I've done the reboot of the router, modem and computer, waiting 30 seconds, etc. with no success. But since the other devices can connect I have to assume it's something with the desktop
View 1 Replies
View Related
Dec 15, 2012
I have an older computer (hp compaq) that was wiped clean and windows xp professional (version 2002 service pack 3), Internet explorer and Microsoft were installed. I took the USB wireless adapter (belkin 54g usb network adapter, which stills works on my old computer) and installed onto the new one. It shows good strength but is limited or no connectivity and will not allow any Internet access. ipcong/renew, win socket commands and all my settings are correct.
View 1 Replies
View Related
