Linksys Wireless Router :: E2000 -Admin User ID Changed To SSID Name?

Jul 12, 2010

I have manually configured the E2000 and set the admin password. When I was trying to log back in, I could not. I reset and reconfigured and set the password again. I still could not log in using "admin" and the password I set up. I thought I was losing my mind. Just on a hunch, I used the SSID name instead of "admin", then entered the password that worked. I am able to login, but I need the username to be admin, not the SSID. Has anyine else had this issue? Any way to change the administrator name back to admin??

View 5 Replies


ADVERTISEMENT

Linksys Wireless Router :: Wrt160n - Original Network SSID Had Been Changed?

Oct 8, 2009

I have a wrt160n router set up at a friends house that i would connect my windows xp laptor to when i would go there.  it always worked fine. i recently got a new laptop with vista 64 bit OS.  i went to my friends today and connected via wireless for the first time.  i expected to get prompted for the security key.  instead it asked for the pin #.  the pin number was something new i noticed when i replaced an older linksys with the new wrt160n so i had it in my notes.  i entered the pin number and connected to the wireless router.  but then my friend laptop could not connect and said it couldnt find the network.  when i viewed the available networks, i noticed that the original network SSID had been changed to my vista laptop's computer name.  i had to physically connect my laptop to the router and reconfigure the settings of the wireless network. then my friend was able to see the available network and automatically connect..

View 6 Replies View Related

Linksys Wireless Router :: E3200 Haven't Changed Any Settings Other Than SSID / Password

Jan 3, 2012

Recently, I bought the E3200, and tried to configure its ports for gaming.  Yet, whenever I would hit save settings, it would say my settings were saved, then return me to the settings page.  But the settings would be blank.  I tried downloading firmware from the website (which should say September 28), yet it still says I am running the firmware from September 1st, even after I applied the upgrade and followed through with the 50 second reboot process.
 
So, I guess my final question for any tech savvy person out there is "What is wrong with my router/firmware?"  I am running the browser config in the most recent Firefox on the same MacBook I used to install the router, and haven't changed any settings other than the SSID and password.

View 2 Replies View Related

Linksys Wireless Router :: EA3500 - Change SSID In Admin Area?

Jun 9, 2012

I have logged into the admin area 192.168.... And I do not see where to change the SSID.

View 2 Replies View Related

Linksys Wireless Router :: EA4500 - Admin Username / Password Versus SSID / WPA

May 18, 2012

The EA4500 web-settings application asks for a username and password.  The username is "admin" and the password is my long (60 character) wpa key.  I see where I can change the password but it says I'll lose all wireless connections.  This doesn't make sense to me.  I would think the router administration username and password are completely separate from the ssid and wpa key. This was the case with my earlier LinkSys router. I'd like a router administration username to be something other than the generic "admin" and a password that is easier than my long wpa key.  I want a separate ssid and wpa key (what I currently have).

View 2 Replies View Related

Linksys Wireless Router :: E2000 Wifi Ssid Disappears And Won't Connect

Jan 1, 2013

My 'main' Wifi SSID will just disappear and you can't connect to it.  the guest account will still show up.  computers/devices that are already connected will stay connected and will work fine, but anybody reconnecting will not be able to.  Only solution I've found so far is to unplug and replug in my router

View 1 Replies View Related

Linksys Wireless Router :: Guest / User Authentication E2000?

Jul 7, 2011

E2000 has the guest account feature.  Not sure if all guests shares the same login credentials.  I would like to have guests account use seperate logins.  Is this feature available?  Another thing, I read the manual and it is indicated that only up to 10 maximum guest acccounts is allowed.  I am looking for more than 10 - kinda like a hotspot software.
 
I've been looking everywhere.  I've seen hotspot system, ddwrt, chillspot, etc.  But it's complicated as firmware needed to be flashed.

View 1 Replies View Related

Dsr 2460r - Changed SSID Now Router Undetectable?

Feb 27, 2011

router is a d link dsr 2460r. got a student at my house with big uni exam on friday

View 6 Replies View Related

Cisco Wireless :: E4200 - SSID Shows Different Then One Set In Admin

Sep 18, 2012

I have a E4200 router(firm 1.0.14), which was acting strange, so I reset it.(Windows PC's were hacked with Bluetooth RAT) I did a 30-30-30 reset, and flashed v1.0.14 firmware again.
 
Presently, I'm using Ubuntu Linux 12.04 LTS, to access Setup(Admin) via computer. After changing to a strong password to access the Admin, I setup everything, as it appeared, [when I used Cisco home network app in Windows, then went in and wrote everything down, in a (paper)notebook],  that I keep locked in the safe.
 
Next, I set the SSID as JCs Gate, expecting JCs Gate & JCs Gate-Guest to appear wireless, after setting up WPA2 security(for both bands), and turning on guest AP and limiting it to 3 as not many use it. After saving and rebooting the router, I am still seeing Cisco23540 as my SSID, and I prefer not to broadcast my router make, as I've reported the neighborhood kid(to his father), after several hacking attempts, from his MAC addy(which I know because I see it in the logs, and sold them the PC custom built) and want to get Cisco out of the SSID.
 
I'm a hardware IT tech pro, with a MCSE cert, so I'm not a stranger to router setups, after 15+ years in the biz. Either, I'm missing something or going crazy. BTW for about 1hour both JCs Gate and Cisco 23540 were both broadcasting.

View 3 Replies View Related

TP-Link Ssid Being Changed

Apr 11, 2013

i have 7 AP's in a school...i have numbered them 1 to 7 and have a strong password on im being called out every few months to reset the AP as its not working when i get there i see the ssid has changed to hp-josh1a seems like a computer name (its different most times) how are they changing the ssid of the tp link?

View 14 Replies View Related

D-Link DIR-615 :: SSID Name Changed By Third Party?

Jan 13, 2012

I had something odd happen to my Dlink router  DIR-651 model.   During the early evening hours someone changed the SSID name of my Router.   Nothing else changed that I could see right off.   So I reset the router to Factory Defaults.

View 1 Replies View Related

Cisco :: Router 8803G - Erase Admin User / Change Password

Jan 15, 2013

i have a Cisco Router 8803G and i would like following commands to be run by telnet:
 
1) erase an admin user
2) change the password of an admin user

View 2 Replies View Related

Changed Domain For Workgroup / Can't Log Into User

Jan 29, 2012

We have a computer running Windows 2000 Pro that used to connect to a domain at work. Upon bootup, it asks for the user/password.Yesterday we tried to connect it to a little home network by changing the domain to a workgroup with a different name (network name that i used at home) as well. Now when it boots up, asks for a user/password, but now it does not recognize my user name and password.I can log in as an administrator to the Workgroup with the new name. but i cannot access the old Domain with its user and passwords. I tried to change back to the old name and to domain, but when doing that i get and error messsage which says: The following error occurred validating the name "xxxxxxx" (network name that I use at home) this condition may be caused by a DNS lookup problem. so I'm not sure if a should run the clear DNS cache. and if in doing that I'll be able to restored it back to the stage that i was before I made the changes.

View 1 Replies View Related

Cisco Wireless :: Restriction SSID Per User With ACS 5.x Version

Sep 15, 2011

I would like to ask some question on WLAN technology, which I using WiSM version 2. And i get requirement that user must be restrict with SSID, so, i found that it can do it on ACS version 4.x via NAR for SSID-based authentication feature. Then, is it possible to do restriction on ACS Version 5.x?

View 4 Replies View Related

Cisco Wireless :: 5500 - Associate SSID With Only One User

Apr 2, 2012

I have created new ssid and i want to associate only one IP address with this SSID, so that only this user will be allowed to connect to AP. I have controller 5500 series.

View 6 Replies View Related

Linksys Wireless Router :: E2500 Is There A Setting Or Setup That Needs To Be Changed

Feb 17, 2012

I had to change from a WRT300N wireless router which died to a new E2500.  I noticed that the speed my computers report that they are connected to the wireless network connection is now 144.5 mps, versus 270 mps with the WRT300N.  There is no change in location of the devices or computers.  The computers use a WUSB300N adapter.Is there a setting or setup that needs to be changed?

View 2 Replies View Related

Linksys Wireless Router :: WRT120N Changed ISP In Hopes Of Getting Better Services

Apr 9, 2012

recently I changed my ISP in hopes of getting better services for a cheaper price. The package I got claims that it has 24mbps download speed. I went on speedtest.net and compared the download speeds between my old ISP and the new one and it turns out it was the same; 7mbps. Either the technicians who came over to setup the new internet messed up or the WRT120N is having problems.

View 7 Replies View Related

AAA/Identity/Nac :: ACS 5.4 And User Admin Roles

May 8, 2012

we have created some administration accounts which should only have the possibility to work on the user database.  the useradmin role is to limited to create a user and set a fixed password only, but not able to enable the users authentication against a predefined external identity store. Other roles which makes this possible are far  to powerful for a second level adminstrator.The adminstrator should have the possibility the create an user and set the password check against an external database. This is not possible with the predefine role "UserAdmin". Other roles do have to many rights for these users.

View 4 Replies View Related

Linksys Wireless Router :: WRT160N V3 Changed Security To WPA2 Personal From WEP

Jun 7, 2012

I recently upgraded the firmware on my wrt 160N v3 and changed the wireless security to WPA2 Personal from WEP (I needed to do this to get higher speeds from a recently purchased wireless adapter).  Now the router stops transmitting a signal intermittently for about a minute before coming back on line.  The time between droppages is also not the same.  Before the firmware upgrade (and the change in security settings) the router was rock solid.  Where I can get the older version of the firmware (which seems to be more stable than the current version)?

View 4 Replies View Related

Cisco Wireless :: 3502 - WLC User Rate Limit On Guest SSID Anchor Controller

Jul 30, 2012

We have been deploying 3502 APs remotely to locations with full T1s that backhaul to where I sit at HQ. Both the foreign and anchor controller are here at my location.
 
I am seeking to rate limit per user the bandwidth each client will get on the guest internet ssid. As you know this traffic is encapsulated in capwap between the AP and the controller so I cant use a standard ACL on the switch or router.
 
We are trying to keep the guest internet access usage in check on the T1 at any given site so the other ssid's & local lan traffic is not overly competing for the bandwidth.
 
I found the place to edit the default profiles in the controller but the documentation really isnt clear on best practices.
 
So I put it to you my fellow wireless engineers to suggest how you are implementing bandwidth management on your wireless guest internet.
      
Oh and here is my hardware & software levels.
 
5508wlc - forgeign
4402wlc - anchor
Software Version7.0.230.0

View 3 Replies View Related

Making A User A Domain Admin In Server 2003

Jul 20, 2011

I have a desktop without a wireless card and i want my network to be wireless so i bought a d-link wireless card for the desktop, the system then discover the wireless network but could not connect it kept on trying to authenticate, it did not even ask me for the web security key, what do I do

View 1 Replies View Related

Linksys Wireless Router :: E900 - Upgraded Firmware / Changed IP Now Cannot Access Setup Page

Jun 6, 2012

I bought E900, accessed setup thru 192.168.1.1, upgraded its firmware.. then changed router's IP, it reboots, then went blank, I cannot access the setup page anymore?

View 9 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 Logged User Cannot Access To Admin Parameters

Sep 9, 2012

After upgrade  to ACS 5.2 appliance ,  we are trying to configure AAA between Ciscoworks  and ACS. Authentication is working but authorization fails , logged user cannot access to admin parameters. I've configured attributes manually but it doesn't work.Does ACS 5.2 support integration with CiscoWorks?

View 1 Replies View Related

Cisco :: 4400 WLC / WCS - Monitoring Lobby Admin User Activity

Jan 26, 2011

We currently have about 8 WLC 4400 series controllers deployed around the company, one of these controllers is acting as an Achor controller for GUEST wifi access for visitors to the company, as a result of this we have many users with "LobbyAdmin" access to setup users.
 
We have recently introduced a Cisco WCS to manage these devices but its not fully implemented/active to see all WLC's.I need to be able to report on the LobbyAdmin users to see who is setting up accounts and for who etc. Currently access to the WLC/WCS is done via Local admin accounts. All accounts for the LobbyAdmin people are setup on our anchor controller.
 
I have added the anchor controller for this to the WCS system but when looking in Administration/AAA/Groups the LobbyAdmin groups shows No Members.Is there a way that i can import the Lobby Admin names from the anchor WLC to the WCS so i can do reports/audit checks on these users?

View 2 Replies View Related

Linksys Wireless Router :: WRT160N Cannot Open As An Admin

May 7, 2012

I need to get to my web admin page, but I cannot get into my router to do so.IE tells mt that there is a certifacte error, and then gives me the option of going in anyway.When I select that option, nothing happens, and the same IE warning page remains.I am plugged directly into an e-net port on the router, and it is a WRT160N.

View 1 Replies View Related

Linksys Wireless Router :: Internet Access Regarding Linksys E2000

Aug 21, 2011

I can connect to my router but either way it seems like i can't get any internet access (both wireless and by cable): url...I have tried the steps that the linksys FAQ suggests shall fix this problem, but this has not worked. I have also tried to reset the router without any luck. I know it its not the modem that is causing the problem because I'm wired to it now.On the E2000 every light is blinking as it should be (hence the FAQ) so it indicates that there might be a problem with the connection between the router and the computer (tested on other computers too without success).

View 9 Replies View Related

Cisco Application :: ACE 4710 To Setup User With Admin Context Access Permission

Jan 12, 2011

ACE 4710 TACACS issues ,How to setup user with Admin context access permission. I have enable the TACACS and it can directly put me in Context mode not in Admin Context mode .

View 8 Replies View Related

Linksys Wireless Router :: Can't Change Admin Password On WRV210

Jul 8, 2011

I just got a WRV 210 wireless router (three of them actually, planning to set up a VPN). But I can't set the admin password. I've tried 4 times, and every time, i've got to hold the reset button to reset to factory settings in order to access the management pages! I enter the new password in both fields, and then click to save the settings. It restarts. Then i try to log in - and it doesn't accept the new password. It doesn't accept the default password. I've tried with admin/(new password) and (new password)/(new password), and admin/admin. None of them work, forcing me to reset router to factory settings. I've tried a password composed of 6 letters followed by a . Thinking that maybe the . was throwing it off, I tried 6 letters followed by 3 numbers. That doesn't work either. I've updated to firmware version 2.0.1.5. No luck. 

View 1 Replies View Related

Linksys Wireless Router :: Cannot Connect To Admin Page At All On E3200

Feb 23, 2012

I don't have to completely reset my router as I have a ton of configs on it.  Anyway, recently for some reason, I lost all access to my admin page.  Cisco Connect also cannot find the router.  Funny thing is that all of my wireless profiles work just fine.  Meaning all of the computers in my home connect to the internet just fine using the router.  Both the guest access and WPA connected machines.[url]...

View 1 Replies View Related

Linksys Wireless Router :: E3200 Admin Page Times Out

Dec 18, 2011

I recently tried to edit settings on my E3200 and was unable to get to the page. I typed in 192.168.1.1 in the address bar, made sure no proxies were enabled and tried on wired and wireless computers and all the times it said "page could not be displayed" i haven't not reset with the button on the back. I also did an map scan of the router and this is what came up
 
Interesting ports on 192.168.1.1:
Not shown: 65531 closed ports
PORT STATE SERVICE
139/tcp open netbios-ssn
443/tcp open https
445/tcp open microsoft-ds
1780/tcp open unknown

View 2 Replies View Related

Linksys Wireless Router :: Admin Panel - Logs And VPN Formation?

Aug 11, 2012

As I've seen in my Linksys' admin panel, I have a log option (Administration/Log). So if I enabled it i can check which sites was browsed in my home network?And the second question: if Linksys can store the browsed sites history and if I will use a VPN connection on my PC or iPhone (not router!) the logs will be still look like before setting-up VPN on PC? So like: [URL] not like: [URL]?

View 3 Replies View Related

Linksys Wireless Router :: WRT160NL - Slow Admin Interface

Mar 6, 2013

I took one and a half hours to get everything set up, I've got a PPoE connection, my problem is that ever since I entered the administration interface each and every page takes 2-5 minutes to load, it's absurdly slow, also, when trying to setup my WiFi, it timed out several times, I updated the router to the latest firmware, the same issue, it took me 4-5 retries to get WiFi set up properly. Sometimes navigating from page to page is quicker, 30-40seconds, but still those are some big times.
 
Is this normal behavior or do I have a hardware problem and I need to take it back and request a new one?
 
Mention: I am wired from a laptop, all the lights are blue, blinking nicely.

View 9 Replies View Related

Linksys Wireless Router :: EA3500 Change Admin Username?

Apr 17, 2012

how to change username admin to something different. I can reset the router password but there's no easily identifiable option for changing the username. 

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved