I had something odd happen to my Dlink router DIR-651 model. During the early evening hours someone changed the SSID name of my Router. Nothing else changed that I could see right off. So I reset the router to Factory Defaults.
View 1 Repliesi have 7 AP's in a school...i have numbered them 1 to 7 and have a strong password on im being called out every few months to reset the AP as its not working when i get there i see the ssid has changed to hp-josh1a seems like a computer name (its different most times) how are they changing the ssid of the tp link?
View 14 Replies View Relatedrouter is a d link dsr 2460r. got a student at my house with big uni exam on friday
View 6 Replies View RelatedI have manually configured the E2000 and set the admin password. When I was trying to log back in, I could not. I reset and reconfigured and set the password again. I still could not log in using "admin" and the password I set up. I thought I was losing my mind. Just on a hunch, I used the SSID name instead of "admin", then entered the password that worked. I am able to login, but I need the username to be admin, not the SSID. Has anyine else had this issue? Any way to change the administrator name back to admin??
View 5 Replies View RelatedI have a wrt160n router set up at a friends house that i would connect my windows xp laptor to when i would go there. it always worked fine. i recently got a new laptop with vista 64 bit OS. i went to my friends today and connected via wireless for the first time. i expected to get prompted for the security key. instead it asked for the pin #. the pin number was something new i noticed when i replaced an older linksys with the new wrt160n so i had it in my notes. i entered the pin number and connected to the wireless router. but then my friend laptop could not connect and said it couldnt find the network. when i viewed the available networks, i noticed that the original network SSID had been changed to my vista laptop's computer name. i had to physically connect my laptop to the router and reconfigure the settings of the wireless network. then my friend was able to see the available network and automatically connect..
View 6 Replies View RelatedRecently, I bought the E3200, and tried to configure its ports for gaming. Yet, whenever I would hit save settings, it would say my settings were saved, then return me to the settings page. But the settings would be blank. I tried downloading firmware from the website (which should say September 28), yet it still says I am running the firmware from September 1st, even after I applied the upgrade and followed through with the 50 second reboot process.
So, I guess my final question for any tech savvy person out there is "What is wrong with my router/firmware?" I am running the browser config in the most recent Firefox on the same MacBook I used to install the router, and haven't changed any settings other than the SSID and password.
I am new to these forums and I have upgraded from firmware 1.00 on the DIR-815 to the 1.01 firmware and once I upgraded, I can log into Xbox, but can't host party chats or host game rooms. I also noticed that any and all messages sent from friends didnt show until I rebooted my console. Something is SERIOUSLY WRONG here and would like a MOD to comment on this.
View 12 Replies View RelatedXbox works fine for some things, I can access Netflix, can download from live marketplace, etc, but cannot join a party and cannot play a game. Other people cannot join my party, cannot play my game. Error when I try to join a party is "Can't connect to xbox live party, there might be a network problem."
Xbox join party and games work fine when connected directly to comcast (motorola) modem.Dir-601, firware 1.02NA and 101NA. Hardware version A1.Port forwarding TCP 53,80,3074 and UDP 53,88,3074 - also included TCP 80 and 21 to no avail.
Contribute to our DCS IP Camera Third-Party Video Monitoring Software List.Do you have experience using third party software to monitor feeds from your DCS camera? Share your knowledge. post your contributions here: DCS Compatible Software(i.e. sticky at the top of the DCS Software board)
View 1 Replies View RelatedDIR655 with 1.33NA firmware. I'm trying to determine how to block access to the internet for a specific LAN computer when the user knows how to change a MAC address. I don't want to turn MAC control on and grant only to listed computers - the list doesn't accommodate enough MAC addresses, and the client has wireless and wired since it's a laptop. I also don't want to set static IPs on all of the devices since some cannot accommodate that feature.I'm thinking that reserving an IP address isn't ultimately the solution either, since assigning the IP isn't going to work if the MAC changes. how to use access control under these circumstances?
View 1 Replies View RelatedLaptop, Desktop with USB stick, and 2 notebooks all were working fine on wireless prior to switching from phone line, to high speed cable connection at router. Have tried reset, unplug power, reinstalled router and everything else I could think of but none of them will connect. Shows a good strong signal from router but will not connect. Re-entered numbers, password etc as well in all other computers. What else to try other than a new router? Could it be coincidence that router decided to quit, around same time as changeover? Cable connections good and main computer connected via cable works ok, just all wireless not working.
Can't log in to d-link either. wrong password,? Type in admin, but won't log on without password and I tried but won't accept . Hitting reset and then retry didn't work either?
I have DIR600 Rev. B1 for about 2 years, and it's been working without a problem.Suddenly yesterday, I could not connect to the internet from my 2 laptop & blackberry.SSID & signal reception looks normal. On checking into the router's web interface, I noticed that the network key was changed into something else.....normal character like y2tz39s.
I'm being very curious. Has it been hacked ? Is it possible?I'm using WAP/WAP2 Security Setting for wireless connection.All other settings seems intact (firewall & even the SSID). Only the password was mysteriously changed. If I consider it being hacked, I wonder why the hacker didn't mess up all other settings ?
Ive been trying to work this out on XBL forum for a while. all my settings seem to be correct ( UPnP, NAT type: open, no port forwarding or triggering, IP settings on Xbox's are auto).
The two Xbox can play online separately, when either one of them attempts to join the others party it disconnects from Xbox live.
According to the microsoft website, Xbox live only supports the Hardware version 1A and Firmware: 1.00NA.
My router has B1 and 2.00NA. is there a way to downgrade?
Changed from D-Link to Netgear router now only one of two computers cannot see the other. Error shows cannot connect to MSHOME network, need administrative approval. Computers are ethernet connected to the router. Have McAffe and both computers are "Trusted" Can do a search with XP and it shows the missing computer but unable to make a connection.
View 5 Replies View RelatedReceived a replacement DCS-930L today; using WPS, did setup wirelessly; all OK. Then did firmware update wirelessly (with second, DCS-932L, turned OFF). The v1.03 firmware file was the same one I previously used, I think. Amazingly, The camera menus are now in French, and I can't find a setting to change it to English.
View 1 Replies View RelatedWith basic "Wizard" setup I got DHCP and port 80 for the camera. It was working just fine with MyDLink and locally with DLink-ViewCam software and some local test web pages. However, we have a wireless printer on that router which also uses port 80, so when it was installed we set up a "port forward" for port 80 traffic to it for administration from other subnets. How MyDLink website is able to tunnel through our hardware firewall and the wireless routers firewall to communicate with the camera is not clear to me (perhaps someone can send me a link to an explanation??), but it works...Thus, to allow access to the camera from other subents, I wanted to change the camera's port from 80 to another, say 8181 and set up the appropriate "port forwarding for TCP and UDP. All of the steps below were from a PC within the camera's subnet/router so port forwarding is not an issue
View 5 Replies View Relatedi have 2 DIR 615 routers which both stop broadcasting SSIDS. Ive had only one connected at a time, thinking it was a bad router, but both behave the same way. Is this a known issue or something ? What happens is, after some time (it varies..sometimes 3hours..sometimes longer), the router stops broadcasting the ssid, and I can no longer connect any of my wireless devices to it. The hardwired connection does work (I have a server connected to it, and it appears to work).The only settings I have changed is my SSID name, and wpa2 password. I've set up one virtual server to port forward requests to the server. Thats it. Nothing complex or anything. And both routers behave the exact same way, meaing they stop broadcasting the SSID.
View 8 Replies View RelatedI had a DI-524 for years and I had no problem. My girlfriend wanted more range /speed for her netbook, and bought a DIR-655.
Had no problem with the netbook (acer One) and the Wii. But the Iphone 1st gen (cracked, but working good up to now) won't see any Wifi.
What to say. I have to read the F* manual, I know. But Geez. "The high end" said the guy at the store.
I should have search the web a bit more before buying because this subject (iphone connect problem) is a popular topic. [URL] won't change a thing. The Iphone don't see the wifi network.
Hardware Version: B1 Firmware Version: 2.00NA
After a firmware update the DAP-1522 HWversion A will not connect to a Hide SSID.
I am Using the DAP-1522 as a Bridge in 5Gz.
I have a new laptop and had a dlink DIR601 installed on an older laptop. I wasn't the one who got it set up originally but they did have me write down my SSID, password and security key. The dlink came with a cd but there is no cd rom on this laptop. I have tried reset, on line download (which only let me do the revisions). I have talked to a few people and they say it's easy!
View 1 Replies View RelatedI recently changed my ssid name from the default "dlink" to a more unique one. The problem is that the router is still broadcasting the default ssid along with the new one. Guest zone is disabled and the new ssid is hidden. But the default ssid is not hidded. Using wpa2 with aes, hardware ver. A1/A2 Firmware ver 1.21. How to remove the "dlink" ssid?
View 4 Replies View RelatedI have a dir-655 Firmware Version 2.00, hardware:B1 It's a new wireless router and it's just a week ago I got it.My problem is that the wireless is just stopping to work, it just disappear.When I do a rescan of wireless AP's the ssid and my AP is not showing up.I have to reboot the router the hard way by unplugging the power source.I have multiple computers and wireless devices, and they all loose connection and no one even see the ssid (AP) defined on my dir-655.It's connected to a cable modem switch (without nat), I'm running dhcmp on my router. No Qos engine is enabled.This happens when I'm working from home with a VPN tunnel from my pc to my companies network.I've tried to make a ticket on this on dlink support pages, but their support system only works on IE7, and the password is anyway rejected. how to solve the termination of my wifi ap?
View 9 Replies View RelatedI've been trying to connect two DCS-942L to some netgear WNHD3004 (wireless access points a/n WPA2 personal) that I use as access point but I can't find them in the site survey (advanced settings then wireless setup in the camera page).I think I could set manually the network name, security mode and key but since I'm working remotly on these camera, I'm pretty sure it won't work and I'll loose connection (actually they are connected to other access points and work ok).An ipad and macbook pro is able to see and connect to these access points so I don't think they are the problem.I've updated the camera to the latest firmware (1.12 build 1608 agent version : 2.0.15-b11)
View 2 Replies View RelatedRegion : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : HNS/Instanet (Cable Internet)
I am using the Router in 3G/4G mode, with WAN only (PPPOE) enabled. I have set a personal SSID in the Wireless > Wireless Settings > Wireless Network Name field.
I do not see the particular SSID on my computer, instead on every reboot / restart of the device a random SSID is generated. see attached screenshot. I can connect and everything works well, but I have to enter the WPA key after each reboot.
Ive had this 655 for about a year now and it has been rock solid. But, there has been one slight issue.
And and all wireless devices can see each other and all wired devices can see each other....but the wired cant see the wireless and vis versa.
The wireless devices (W7 and Vista laptops) can see the wired devices when they are plugged in. But my phone and Galaxy Tab can only see whatever wireless devices there are (cant be plugged in). Even my wired Samsung TV cant see the shares on the Tab or wireless laptops (and vis versa). So, its certainly not a firewall or OS config issue.
Now, I made sure they are all connecting via the main SSID and not the "isolated" Guest SSID....but its acting like the main SSID is isolated from the wired LAN somehow.
Firmware 1.34. IPs for the wired and wireless devices are all in the 1.2 - 1.50 range.
Region : Hongkong
Model : TL-WR702N
Hardware Version : V1
Firmware Version :
ISP :
Before my TL-WR702N was working fine as a reperter. After sometime it doesn't work any more, so I try to reset it again but now I couldn't see my SSID after I press the survey buttom in the quick setup - wireless repater page.
it's across 3 floors and the current setup is a single wireless router DIR655 (1st floor), but the WiFi suffers greatly on the floor below/above.
I have sourced 3x D link switches and 2x more DIR655's and would like to have all machines/consoles/phones etc in the household on the same network. Is it possible to keep one DIR655 as the main wireless connection and have the other as pure AP's as well as keeping the same SSID?
I use wireless internet connection and I see “third party setup = Yes under configuration. Is it about sharing data or being monitored
View 1 Replies View RelatedAny 3rd party CA to provide a root cert for the ACS & verify csr's generated by the 7925's? I've spoken with customer service at Verisign and GeoTrust and either i'm explaining it totally wrong or their not providing CA services for this type of secured environment. sHA1 using EAP-TLS.
View 1 Replies View RelatedI have a school club, but our school does not allow any wireless networks within the school perimeters.Wired are allowed, but wireless are not allowed.I plan to host a LAN party for my club, and we will have about 20-30 people.We cannot have any internet access, and I have not touched a wired stuff, There is a 24 ethernet switch, and if I buy one, and suppose I buy another 24 ethernet switch (I know there is a 48 ethernet switch), can I connect those two 24 ethernet switches to make 47 ports?* For a LAN party without internet access, can we use an ethernet switch or do we use something else?* For 20-30 people, it is recommended that we have a ~8mbps upload speed. When ethernet switches advertise 10mbps, is that upstream & downstream? When all the computers are hooked to 24 ports, does the advertised 10mbps go lower? (I have seen 100/10 mbps, and I don't know what that means)
View 4 Replies View RelatedI'm trying to connect a few of my devices to the wireless internet at home.
1.Xbox 360
2.Galaxy Tab 10.1
3.My Touch 4g
All of them can recognize the the network they just will not connect. All my freq are good 2.4 or 2.5. WEP Key works no problem, just the minute I try to connect the galaxy tab and cell phone just says "remembered, secured with WPA/WPA2 PSK." The xbox when running the test connection fails as well.
Running vista x64 home premium on HP DV7 1270us.
I would like to use the NCS 1.2 to monitor Juniper SRX 210 firewall. When I try to import the MIB File from NCS, which show "Error: Failed to load MIB File "mib-802" because it is not in the resource path.what I can upload the MIB File from Juniper. [code]
View 0 Replies View RelatedI have came across some third-party ws-g5483's that I was thinking of using. But when I go to plug them in, nothing seems to happen. I have tried them in ws-c3548-xl-en and also a ws-c3524-pwr-xl-en with the same results. I know on the newer switches you can do the serviice unsupported-transceiver command but is there anything I can do to get these to work with older switches?
View 5 Replies View Related