D-Link DIR-655 :: Iphone (1st Generation) Can't Connect And Don't See SSID
Jul 9, 2011
I had a DI-524 for years and I had no problem. My girlfriend wanted more range /speed for her netbook, and bought a DIR-655.
Had no problem with the netbook (acer One) and the Wii. But the Iphone 1st gen (cracked, but working good up to now) won't see any Wifi.
What to say. I have to read the F* manual, I know. But Geez. "The high end" said the guy at the store.
I should have search the web a bit more before buying because this subject (iphone connect problem) is a popular topic. [URL] won't change a thing. The Iphone don't see the wifi network.
Hardware Version: B1 Firmware Version: 2.00NA
View 5 Replies
ADVERTISEMENT
Jul 27, 2012
on a 5508 WLC can we create new SSID for I PAD / IPHONE Users without having ISE, only I phone / I PAD are allowed to be authenticated rest all should be denied. IS this possible?
View 8 Replies
View Related
May 21, 2012
I recently tried resetting my router (dlink dir-655). I am able to connect using my iphone and my mbp if I did not make use of a secure connection. I tried putting a password on a new ssid. My ipad 2 and 2 other windows laptops are able to connect without any problem. My iphone 4s was having a hard time connecting to the new ssid. It does not connect automatically just in case I turn on and off my wifi connection for the iphone. I have to type in the wpa password whenever I had to go online again. FYI, I tried resetting my iphone several times and I still get the same response. As for my mac, it was far more much worse. Whenever I tried to connect to my router. It usually says connection time out. I tried resetting the router one more time again. I had to put in the old ssid and the old wpa password. My Iphone 4s was abe to connect automatically. My mbp did the same thing also.
View 1 Replies
View Related
Apr 14, 2013
I set up a DIR-655 router for a friend 4 years ago and it's worked reliably with all of their equipment since. They have wireless printers, iMacs, pc laptops and iPhone 4S's, all connecting without any problems. Recently, they got an iPhone5 and it will not connect to their home wireless automatically, they have to re-enter the password each time. They've tested their iPhone 5 on other networks and they do not have to re-enter the password. Apple and ATT are blaming the router. I do not live near them and I'm going to have to facilitate them remotely. At this point, I believe their router is configured with WPA2, but I can't be sure. Which configuration will work with the iPhone 5, as well as their other, older, devices that have worked for 4 years
View 1 Replies
View Related
Dec 11, 2012
Model : TL-WR741ND
Hardware Version : V1
Firmware Version :
ISP : EOLO
give me procedure for connecting WiFi to iPhone.The phone recognizes the router, but will not connect.No numbers, i.e. 192.168.1.1, etc are loaded No DNS loaded?
View 2 Replies
View Related
Jul 31, 2012
After a firmware update the DAP-1522 HWversion A will not connect to a Hide SSID.
I am Using the DAP-1522 as a Bridge in 5Gz.
View 6 Replies
View Related
Sep 6, 2012
I'm facing a problem on vWLC. I configured the vWLC and Aironet 1252, I created 2 SSID with below settings.
1. WPA2 Auth 802.1X
2. Web-Auth
Inside Wireless, I configured this AP Mode as "Local", but all of the client device such as iPhone, Laptop can't find these SSID.
View 3 Replies
View Related
Apr 7, 2011
Camera set up with the Beta Mac wizard connected via ethernet on Airport base. Wireless security WPA2 Personal. Using DHCP. AirPort Utility 5.5.2, OSX 10.6.6.I can see the cam with the myDlink Lite iPhone (4) App when I am in my house with my wireless network. When I am out, away from my network, the App can't connect to the cam, tells me to check my network settings. I did the wps way and added the cam in the airport base utility *Access Control* tab but still doesn't work. Checked in the cam web page settings, can't figure out what the Pre-Shared Key is and where I get it/set it up in the airport utility...
View 1 Replies
View Related
Aug 17, 2011
I am using LMS version 3.2 and i am not able to generate EOS/EOL report with error no connection to Cisco.Saw an update i LMS portal as this:
Now Available! LMS 3.2:Patch for un-interrupted service of Cisco.com download for Device/Software/PSIRT/EOX updates (To be applied on or before 15-June-2011)
so upgraded the patch cwcs33x-win-CSCto46927-0.zip and restarted the demeon as read in the read me file for the patch.Now the job execution status is always shows running, its neither fail nor pass.
View 6 Replies
View Related
Mar 5, 2013
So we're looking at building a server farm using HP DL385 Gen8 servers. We want to use SSDs, but the ones from HP are at least double the cost of other SSDs. Anyone put a generic Intel, OCZ, etc... SSD in an HP gen8 server?
View 3 Replies
View Related
Jul 2, 2012
My iPhone 4 floods my log with:
[INFO] [date] [router name]: Wireless system with MAC address [iPhone] secured and linked
[INFO] [date] [router name]: Wireless system with MAC address [iPhone] associated
What's the reason for this and is there anything I can do to prevent it?
View 9 Replies
View Related
Dec 16, 2008
Im having trouble connecting my iPhone wirelessly using my 615 router. The iPhone sees the router, but cannot connect to it using the router password that i have.
View 8 Replies
View Related
Mar 25, 2012
I owned a dir-600 for 3 months now. for the first 2 months the router has been working perfectly fine. Meaning: my iphone and other devices can connect to wifi with no problem. Just under a month ago, the dir-600 started acting up. I done everything, from resetting router to even calling my dsl provider to check if the problem was with my provider. I also tried connecting my iphone to other wifi and it was able to connect without hassles.
I am not computer-savvy and I've googled everything but nothing seemed to fix the problem. I have attached the traffic statistics of the router. Obviously there is something wrong.
View 14 Replies
View Related
Dec 11, 2012
Anyone having problems connecting N150 router to a 1st Generation Nest Thermostat? Nest support says it's a problem with them not conforming "to the TCP/IP specifications around Network Address Translation (NAT) timeouts and are disconnecting Nest too soon". Any way to work around this problem until/if a firmware update fixes it?
View 3 Replies
View Related
Jul 1, 2012
I have two routers 1921 and 2901 and both of them are connecting to one Reliable Internet Line from one ISP. 1921 master router and 2901 as a Slave. this is my question, how i can make a Backup DHCP Sever in 2901 as a same IP address generation?
Example :
1921-------> Ip Generator 10.1.1.0 /24
2901-------> Ip Generate 10.1.1.0 /24
both generate same ip address, when the Master is lost, Slave could be Covered the LAN.
View 4 Replies
View Related
Feb 20, 2011
I use this router for my laptop with WPA2 encryption.. It works fine But When I try to use my iphone for wifi , It says ' Unable to join the network"
When I remove the security, It work s fine on iphone. how to allow iphone to access the wifi
View 1 Replies
View Related
Mar 5, 2012
Is it possible in the near future?
View 5 Replies
View Related
Aug 16, 2011
When I try to connect to dlink on my Iphone there is a padlock symbol on it, and it requires a password , how do I find this password out please. I have a DIR-615 and am tech noob. Also I lost the info that came with the router. Is there any way to find out my password that an can understand?
View 5 Replies
View Related
Jun 9, 2011
I just setup 3 webcam DSC-930L for a friends with a router DI-655.
I run the setup for the 3 webcams. If I use my dlink on the local network it work, if I used my dlink from let say at work, it work too. If I used the i pad in WiFi it works.
The problem is when I try to use the i phone or the i pad in 3G mode, sometimes it work but most of the time it doesn't, after about 60sec it says something like check your network settings... When I'm able to see something in my dlink app on the i phone, if I return back to the list after that it doesn't work if I switch camera.
Question is, do I have to forward any port on the router in the virtual server section? I'm assuming no since sometime it work and sometimes no. Do I have to activate the UpnP on the router too?
View 1 Replies
View Related
Oct 20, 2011
I plug it in and connect the computer to it and expect it to work. And it has been doing that without any problems until I bought an iPhone and brought it into the house. I thought it was a fluke, but the day I brought the phone in, my computer started intermittently losing it's connection. If I turn the phone off, the connection comes back on. But what seems really odd to me is that if I right click on the wireless network icon it says I am connected and the strength of the signal is excellent. But then it says no internet access.
View 2 Replies
View Related
Jun 9, 2013
I need to know if the cisco ASA next generation specially ASA 5515X support PBR or no ?how to implement it? Also if i have many internet connections and i need to dedicate 2 ISP’s ADSL internet lines to certain service (such as mail) if the 1st fail, so the 2nd line come up to make redundancy with it ----------- Is this available on cisco ASA next generation.
View 1 Replies
View Related
May 8, 2013
In have the 942l and the mydlink Lite app on the iPhone. I have recording set up on the camera capturing in .mp4 format. I can view the camera on the phone fine. I can go the menu and select playback. I see the date of my recordings and the time. Each individual file is listed as you can see.
When I select any of these files, I get a black screen.
Do I need to change the rtsp URL? Anyone have this working correctly on the iPhone? If so, can you share your settings?
View 1 Replies
View Related
Apr 8, 2013
Region : Brazil
Model : TL-WR470N
Hardware version: v2 Firmware version
latest (updated yesterday)
ISP:
My Iphone doesnt recognize my printer (HP Photosmart D110a) when I try to print something from it by AIRPRINT. After updated my printers and routers firmwares, the problem continues. Ive been read a lot and seems that the problem is caused by a problem with IGMP or Multitasking protocol.... But I dont find these in my routers page even after updated my firmware.
View 3 Replies
View Related
Aug 24, 2011
my iphone will not accept my router password. when i begin entering the p'word in the iphone setup screen the "join" button turns off.
View 2 Replies
View Related
Jun 14, 2011
I log onto other wireless networks the first time by inputting their passwords. My iphone then always automatically reconnects wirelessly to them without have to input the password again. The phone can be asleep for a few minutes or I can be gone for a month. The phone always automatically remembers & reconnects to these networks.However, it doesn't work that way with my d-link system @ home. Everytime the phone sleeps and I wake it up, the wireless connection is lost. There is no automatic reconnection. I have to input the password each time in order to re-establish the wireless link. My printer and laptop seem to stay connected. d-link settings I need to change in order to get my iphone to automatically connect all the time?
View 7 Replies
View Related
Feb 26, 2012
This causes massive 3G data to be used. If you don't close the app first it just keeps streaming and eating data + battery.This data screen cap is for 10 minutes after locking the phone with the app open.When the phone locks, the app should kill the video streaming.
View 5 Replies
View Related
Jan 27, 2013
How to develop an iPhone based application which can show live streaming from DCS-930L IP camera? how to support various other IP cameras as well in the application?
View 8 Replies
View Related
Apr 15, 2013
Region : UnitedKingdom
Model : TL-MR3220
Hardware Version : V1
Firmware Version :
ISP :
I will soon be moving to somewhere without DSL service. I was wondering if it is possible to connect my iphone 4 to the usb of the mr3220 and use the iphone's 3g data allowence?
View 1 Replies
View Related
Dec 23, 2012
Region : India
Model : TD-W8951ND
Hardware Version : V4
ISP : MTNL
I m using TD-W8951ND wifi router with MTNL connection. The LAN connection with PC works just fine but i m not able to connect my iphone or ipad with the router. I have reset the router many times and also retored my iphone but still no luck. Pl tell me what are the settings needed for wifi connections.. Currently i have set the wireless mode to 802.11 b+g+n. Setting it to just 802.11 b sometimes connects with the iphone but never with ipad.
View 6 Replies
View Related
Jul 25, 2012
After being away for a week, I return home to find my laptop unable to connect to the Internet. It seems the router has been reset (as the router name has returned to its original). My laptop can recognise the router, it shows 5 bars signal strength but will not connect. I know the password is correct as my iPhone can connect. I am not too knowledgeable about these thingsI have tried deleting all saved networks and re-booting. I had no problem connecting a week ago.
View 17 Replies
View Related
Apr 5, 2012
My iphone 4s does not connect to my wireless network which runs on netgear wgr614 v7. It did until two weeks ago. On my phone it will not accept the password and I have not been able to connect at all. On my phone it shows the network is locked.
View 4 Replies
View Related
Dec 22, 2011
my wife and i can't connect to our home wireless internet with our new iphones. last night we tried connect a tablet we bought for our son to the wifi but it won't connect either.
View 2 Replies
View Related
Dec 8, 2012
My laptop's wifi is just working fine with TP Link but I'm unable to connect internet via wifi on my iPhone 3G. My iPhone's wifi just works fine in my office. Is there any solution available?
iPhone 3G 8MB
iOS 4.2.1
Modem Firmware: 06.15.00
Router: TP LINK TL-MR3220
Firmware Version: 3.13.12 Build 120524 Rel.60134n
Is there additional setting for iPhone?
View 1 Replies
View Related
