D-Link DIR-601 :: Iphone 4 Does Not Automatically Reconnect To Wireless Network After Waking Up
Jun 14, 2011
I log onto other wireless networks the first time by inputting their passwords. My iphone then always automatically reconnects wirelessly to them without have to input the password again. The phone can be asleep for a few minutes or I can be gone for a month. The phone always automatically remembers & reconnects to these networks.However, it doesn't work that way with my d-link system @ home. Everytime the phone sleeps and I wake it up, the wireless connection is lost. There is no automatic reconnection. I have to input the password each time in order to re-establish the wireless link. My printer and laptop seem to stay connected. d-link settings I need to change in order to get my iphone to automatically connect all the time?
View 7 Replies
ADVERTISEMENT
May 29, 2011
How to reconnect to Wi-Fi network automatically
View 1 Replies
View Related
Jun 28, 2011
I used to have ATT DSL but we recently switched to U-Verse. I have a Trendnet TEW-452BRP 54g wireless router than was handling the PPPoE function. It was set to work flawlessly with my wireless cards. No dropped connections, speed or security issues. It always connected quickly from wake up and on start up. Now we have a 2Wire i38HG wireless router/gateway and it's been difficult to properly set my network up as before. I use the Trendnet behind the 2Wire as my wireless router. Took me a while to figure out what to do, but DHCP is disabled on Trendnet so 2Wire does what it needs to. This option works fine for me. The only problem is that at first my wireless card would not automatically connect to the network through the Trendnet when it is in range like I had it set to do previously. When I would force it to, after 3 times it would magically connect on it's own. I made some changes in the Trendnet (Mainly disabling dynamic DNS and NAT) and that seems to have made a difference. To be honest, I don't know if that is significant or not or if it actually made a longterm difference but it seems like it has. So my problem is now that when I put my laptop to sleep and have it wake up, it does not automatically reconnect. It takes about 2 minutes then it does on its own. I read the event viewer and this is the info it gave me - Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 0x0018DE0682D8. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Level - Warning
OpCode - IpLeaseRenewalFailed
Source - Dhcp-Client
Then after 2 minutes -
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x0018DE0682D8. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Level - Error
OpCode - IpAddressNotAssigned
Source - Dhcp-Client
After this, it connects by itself. I don't believe I have configured the 2Wire or Trendnet properly, so I need some guidance and suggestions on this matter.
Laptop - Intel Core Duo 1.66ghz, 2gb Ram, Win7 Professional with SP1, Intel PRO Wireless 3945ABG
2Wire - 192.168.1.254
Trendnet - 192.168.1.1
- I did not change the IP of the Trendnet and I am not sure if I have to.
From the 2wire - Private Network
Router/Gateway Address192.168.1.254
Subnet Mask255.255.255.0
Private Network DHCP Info
Range192.168.1.64 � 192.168.1.253
[code]....
View 10 Replies
View Related
May 7, 2012
I recently got an E1000 router brand new V2.1 from a friend. Seems to run great, only problem both my Mac Book Pros (running snow leopard and lion) will not reconnect automatically to the wifi after waking up from sleep.
View 1 Replies
View Related
Jun 19, 2012
I am testing our new wireless network using 1 Cisco 2504 wireless controller with 5 licenses 4 Cisco Air LAP 1142N Access Point I configured it very simple for testing There is only one interface and vlan is untaggetd There is also only one WLAN with one SSID Currently security setting is WPA + WPA2 + PSK (I also tested with no security setup) Wlan session time is diabled and controller user idle timeout is set to 1000000 (Max)AP boot version is 12.4.23.3 and ISO version is 12.4(23c)JA3 Problem is clinet(iphone) does not automatically associate with 1142N Access Point even after it learned network. Phone has to be authenticated again to connect to network same iphone can automatically associate with old 1220 Access point but not with New AP if I urn off and turn back on wifi from iphone, it does see the network but does not connect but I have to manually reconnect to it with password I want iphone to connect known network without reauthentication process after iphone's wifi function is turn on?
View 24 Replies
View Related
Jan 17, 2010
I'm having trouble keeping my server asleep. I've been thorough in my process of elimination, and have narrowed it down the DIR-655.
I am trying to get my server to go to sleep after say, 30 mins.. and stay asleep until either me, or my wife try to access a file on it. However, it wakes up around 30 seconds after going into sleep... every time.
I've disconnected everything else from the network, and it still does it. I've disconnected my modem from the router, thus having no WAN access, and it still does it.
No other software is running on the server that is waking it up. No tasks are running that can wake it up. However, if I pull the ethernet cable from the back of the rig, it sleeps just fine.
I've disabled DHCP as all machines have a static IP.
I'm at a loss as to what else to do now. Clearly the router is broadcasting something that keeps the server awake.
I hope so, otherwise the DIR-655 goes into the trash. I need the server to sleep when not required.
View 14 Replies
View Related
Apr 7, 2011
Camera set up with the Beta Mac wizard connected via ethernet on Airport base. Wireless security WPA2 Personal. Using DHCP. AirPort Utility 5.5.2, OSX 10.6.6.I can see the cam with the myDlink Lite iPhone (4) App when I am in my house with my wireless network. When I am out, away from my network, the App can't connect to the cam, tells me to check my network settings. I did the wps way and added the cam in the airport base utility *Access Control* tab but still doesn't work. Checked in the cam web page settings, can't figure out what the Pre-Shared Key is and where I get it/set it up in the airport utility...
View 1 Replies
View Related
Dec 8, 2012
My laptop's wifi is just working fine with TP Link but I'm unable to connect internet via wifi on my iPhone 3G. My iPhone's wifi just works fine in my office. Is there any solution available?
iPhone 3G 8MB
iOS 4.2.1
Modem Firmware: 06.15.00
Router: TP LINK TL-MR3220
Firmware Version: 3.13.12 Build 120524 Rel.60134n
Is there additional setting for iPhone?
View 1 Replies
View Related
Nov 17, 2012
Region : Italy
Model : TD-W8968
Hardware Version : V1
I have a problem with my new td-w8968 router.The problem is that i can't use the reconnect function in the program jdownloader.The script is created with jd but it doesn't work!!!
View 1 Replies
View Related
Jun 3, 2011
I just upgraded my motherboard and I'm happy that the WUSB 300N is still working. Slightly annoying issue when I wake my computer from sleep. No internet connection and when I go to adapter settings, the WUSB 300n is disabled. If I click enable, nothing happens. The adapter will immediately come back to life and connect to the router and internet if I unplug it and then plug it back in (the usb connector).I also notice that the adapter is still on when my computer is asleep, all of the lights are still on and blinking, this is not the same behavior that it had before, then it would just appear to be completely off. The motherboard is a MSI P67A-GD65 with an intel i5 2500K. There are some different C-State power settings that I'm not familiar with (previously had an AMD based mobo and processor).
View 1 Replies
View Related
May 30, 2012
I have Inspiron 1525 with Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller. After reformat, the network will not detect wireless modem after I think I have downloaded all pertinent drivers. In Device Manager, under Other Devices, The Network Controller shows an exclamation mark that under Device Status says, "The drivers for this device are not installed. (Code 28) To reinstall the drivers for this device, click Reinstall Driver." I have turned on the button on the left of the laptop and still missing something.Prior to the reformat everything was working well. I had the Blue Screen of death andthat's the reason for the reformat.
View 15 Replies
View Related
Feb 24, 2011
Does a RESET automatically re-enable wireless = ON? or is wireless OFF until you go into the config and reenable it?
View 2 Replies
View Related
Jun 21, 2011
ISP Virgin Media who ship DLINKS without any assistance for custom options, I seem to be having no end of trouble trying to get my DLINK615 and Xbox to play fair.In order to allow me to play my Xbox without any technical problems, or problems with other players I had to open up a few ports, been there resolved that. But, I only want to open them on one IP I want to always be assigned to the Xbox360. This IP being 192.168.0.100
I added that into the DHCP Reservation list, only to find that the Xbox failed to reconnect after being turned off and back on, I believe this is a problem with the DLINK Router, unless I am very badly mistaken.
View 14 Replies
View Related
May 13, 2013
Region : India
Model : TL-WR841N
Hardware Version : Not Clear
Firmware Version :
ISP :
i bought the TL-WR841N a week back. the problem is that the internet connection has a web based login( wherin i have to go the "login.hathway.com" and enter a username and password provided by the service provider). i was wondering if there is anything i can do so that the wifi router on its own can log on to my account automatically every time i connect a device to the router. This would save alot of time for me.
View 1 Replies
View Related
Jan 9, 2013
Region : Spain
Model : TL-WR1043ND
Hardware Version : V1
ISP : Telefonica
I have a shop and retail TP products.I have had in the past 2 days three TD-W8961ND's returned due to internet issues.upon investigation the problem is the same in that DHCP is not enabled on each of the 4x ports.It is the same across 3 customers and occurred last week end.
View 1 Replies
View Related
Mar 2, 2013
Region : Sweden
Model : TL-WR740N
Hardware Version : V4.20.0
I have a TL-WR740N. If router is on and I turn on my laptop it will not automatically connect to the router. I must turn off the router and then turn on again to get connection to the Laptop. I think I have missed something in configuration of the Laptop.
View 2 Replies
View Related
Jan 20, 2011
I've setted the unit in BRIDGE MODE, and attached on it 3 LAN devices, 1 PC Desktop, 1 NAS WDBE and 1 HP printer ... OK all config process was right and all my units talk togheter via AP Netgear DNG2000, and so i can use for instance the printer with my laptop too connected in WI-FI N. Now usually, In the night I turn off all my devices (DAP included), and when in the morning I need only the printer used by my laptop, obviously I turn on ROUTER - BRIDGE - PRINTER - LAPTOP but NOT the DESKTOP ... and so the DAP can't reconnect automatically to the router (both the lights AP/BRIDGE are on and fixed) ... I turn on the PC and the BRIDGE reconnect to the world .... BUT I DON'T WANT turn on everytime the desktop !
1) all gears has fixed IPs
2) DHCP server deactivated on the AP main router (DNG2000)
3) no WPS used, only WPA2-PSK (AES) personal keys on all gears
once that DAP-1522 is connected to the router .... all work fine (also when I turn off the DESKTOP).so the workaround is never turn-off the DAP ? I can't believe ... and who will save the energy planet
View 2 Replies
View Related
Apr 8, 2013
Region : Brazil
Model : TL-WR470N
Hardware version: v2 Firmware version
latest (updated yesterday)
ISP:
My Iphone doesnt recognize my printer (HP Photosmart D110a) when I try to print something from it by AIRPRINT. After updated my printers and routers firmwares, the problem continues. Ive been read a lot and seems that the problem is caused by a problem with IGMP or Multitasking protocol.... But I dont find these in my routers page even after updated my firmware.
View 3 Replies
View Related
Aug 24, 2011
my iphone will not accept my router password. when i begin entering the p'word in the iphone setup screen the "join" button turns off.
View 2 Replies
View Related
Dec 23, 2012
Region : India
Model : TD-W8951ND
Hardware Version : V4
ISP : MTNL
I m using TD-W8951ND wifi router with MTNL connection. The LAN connection with PC works just fine but i m not able to connect my iphone or ipad with the router. I have reset the router many times and also retored my iphone but still no luck. Pl tell me what are the settings needed for wifi connections.. Currently i have set the wireless mode to 802.11 b+g+n. Setting it to just 802.11 b sometimes connects with the iphone but never with ipad.
View 6 Replies
View Related
Dec 27, 2012
We have a customer who has a network consisting of two ISPs, one as a primary and the other as a backup. We are trying to create a configuration that would allow the primary link to fail and the secondary link to automatically pick up traffic and begin routing .how to set something like this up. Both routers are non Cisco routers and there for HSRP is out.
View 14 Replies
View Related
Dec 11, 2012
Model : TL-WR741ND
Hardware Version : V1
Firmware Version :
ISP : EOLO
give me procedure for connecting WiFi to iPhone.The phone recognizes the router, but will not connect.No numbers, i.e. 192.168.1.1, etc are loaded No DNS loaded?
View 2 Replies
View Related
Mar 4, 2013
I kinda accidentally disabled our internet network and I can't find a way to reconnect it with our adapter. I tried to troubleshoot it and also search for our device, and nothing seems to work.
View 8 Replies
View Related
Mar 10, 2011
I've been having a problem with my wireless network connection. Whenever I try and hit the Repair function,it will get stuck on Renewing your IP address for a moment, then change to: Windows could not finishing repairing the problem because the following action cannot be completed: Connecting to the wireless network. I have internet connection on this same computer.Another point to make is that when I click Repair and navigate to the Network Connections window, then hit F5 ( refresh the window ), the wireless connection will quickly refresh and connect normally without error.I won't have to open the Network Connections page and hit F5 anytime I need to repair the connection? Also, as of right now, it's still "Acquiring network address" even though I'm connecting and typing this message.
View 10 Replies
View Related
Apr 13, 2012
Mobile devices are saturating our medium sized enterprise network. Examples of these devices are iPhones, iPads, Kindles, Droids, etc When a device is authenticated on our APMobile wireless network and downloads updates, email, or music our Network bandwidth is consumed. Services/Applications are no longer available, such as VoIP. Basically, this is an internal DoS.I have done some research and an example of this problem is an ARP Storm but currently clients obtain IP addresses form our DHCP server, which acts as a proxy for the clients and if effective against deliberate attempts to craft packets that create ARP Storm. In addition we configured the WLC to disable ARPunicast processing via the CLI.The following link is from Cisco's site. It is the ARPstorm that we originally thought was the cause but after more researching we found it wasn't this exact issue - http:[url]....why iPhones frequently take down our network? Could this be a configuration issue with our firewall (Cisco ASA 5520 running version 8.4(2))?
View 1 Replies
View Related
Apr 5, 2012
My iphone 4s does not connect to my wireless network which runs on netgear wgr614 v7. It did until two weeks ago. On my phone it will not accept the password and I have not been able to connect at all. On my phone it shows the network is locked.
View 4 Replies
View Related
Sep 20, 2011
I have a red x in "My Computer" at the network drive. cannot connect to it. what do you suggest. I am on a pere tp pere network
View 1 Replies
View Related
Oct 4, 2011
How can I locate my password for my wireless network? (I need it for my iPhone)
View 3 Replies
View Related
Mar 17, 2013
Region : Germany
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP :
all my systems are configured under "IP & MAC Binding". Binding is activated globally and all check marks for every ID are set. After i finished my configurations, the "ARP List" status shows, that everything is bound - so far everything is great. The problem appears after a router reboot or after shutting the router down and powering it on again. The "ARP List" then shows only a few of my IDs and their status is unbound. I need to go back to the "Binding Settings" and hit "Save" - after that all my IDs appear in the ARP-List and everything is OK again.
View 3 Replies
View Related
Mar 10, 2013
win xp I work at a junior high school. A lot of the computers are part of a work group so they can share printers.
I'm having problems connecting to a printer. It has worked for a long time, it's still my default printer, but when I try to access it, it gives me a spooling error.
Now here's why I think it's a network problem.I can't access the main computer's network location (the one hooked up directly to the printer). All the other computers come up on the networkjust fine. And the one in question is only able to access very few computers in the network browser. let me simplify:
computer A/ brother printershared computer B/no longer sees A on network A/ sees only a small portion of other computers on network B/ sees all computers but A
Again, I don't think it's a spooler problem. It probably gives that error because it's a default printer with a lost connection.
View 10 Replies
View Related
Mar 7, 2011
Netgear WGR614v7 Router.I have three computers wi-fi networked via the Netgear router: a laptop, a Mac Mini, and a XBox 360.About 30% of the time, when I wake my laptop up, it's been dropped from the network. The only thing that seems to allow it to connect again is if I unplug the power from the router and plug it back in again.This also happens to the XBox 360 once and a while. It never happens to the Mini. I suspect the Mini never gets dropped because it never gets turned off or goes to sleep.Some things I've tried to no avail:
- restarting my laptop
- manually reconnecting to the network via the icon in the system tray
- ipconfig /release, /renew
- disabling power management on my network adapter
- updating my router's firmware
My research keeps pointing to my router's "idle timeout" setting, though that may or may not actually be the problem. In my router setup, I currently have the "Does Your Internet Connection Require A Login?" setting set to No. When it's set to No, I do not have access to my Idle Timeout setting. If I set Login Required to Yes, I do have access to Idle Timeout, but none of my computers can connect, and I'm unsure how to get that working properly. I've read that if I set Idle Timeout to 0 (zero), it essentially never times out.
View 1 Replies
View Related
Mar 16, 2011
I work in a mall and we have a strong unsecured wireless signal for "courtesy internet.If I connect to it with my laptop or iphone it says that I am connected, but I cannot access anything.Troubleshooting the network has not done anything.
View 1 Replies
View Related
Mar 15, 2011
So my AE1000 adapter doesn't connect to my network after waking my computer up from standby mode. I tried disabling the power management option where it allows you to turn off the device to save power but it still won't automatically connect to my network. I have to manually remove the adapter from the usb port and plug it back it for it to work again. I'm using Windows 7 64 bit,the latest drivers from Cisco's website, and my anti virus program is Microsoft Security Essentials
View 4 Replies
View Related