How To Reconnect To Wifi Network Automatically
May 29, 2011How to reconnect to Wi-Fi network automatically
View 1 Replies
ADVERTISEMENT
D-Link DIR-601 :: Iphone 4 Does Not Automatically Reconnect To Wireless Network After Waking Up
Jun 14, 2011I log onto other wireless networks the first time by inputting their passwords. My iphone then always automatically reconnects wirelessly to them without have to input the password again. The phone can be asleep for a few minutes or I can be gone for a month. The phone always automatically remembers & reconnects to these networks.However, it doesn't work that way with my d-link system @ home. Everytime the phone sleeps and I wake it up, the wireless connection is lost. There is no automatic reconnection. I have to input the password each time in order to re-establish the wireless link. My printer and laptop seem to stay connected. d-link settings I need to change in order to get my iphone to automatically connect all the time?
View 7 Replies View RelatedWireless Does Not Automatically Reconnect Out Of Sleep Mode
Jun 28, 2011I used to have ATT DSL but we recently switched to U-Verse. I have a Trendnet TEW-452BRP 54g wireless router than was handling the PPPoE function. It was set to work flawlessly with my wireless cards. No dropped connections, speed or security issues. It always connected quickly from wake up and on start up. Now we have a 2Wire i38HG wireless router/gateway and it's been difficult to properly set my network up as before. I use the Trendnet behind the 2Wire as my wireless router. Took me a while to figure out what to do, but DHCP is disabled on Trendnet so 2Wire does what it needs to. This option works fine for me. The only problem is that at first my wireless card would not automatically connect to the network through the Trendnet when it is in range like I had it set to do previously. When I would force it to, after 3 times it would magically connect on it's own. I made some changes in the Trendnet (Mainly disabling dynamic DNS and NAT) and that seems to have made a difference. To be honest, I don't know if that is significant or not or if it actually made a longterm difference but it seems like it has. So my problem is now that when I put my laptop to sleep and have it wake up, it does not automatically reconnect. It takes about 2 minutes then it does on its own. I read the event viewer and this is the info it gave me - Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 0x0018DE0682D8. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Level - Warning
OpCode - IpLeaseRenewalFailed
Source - Dhcp-Client
Then after 2 minutes -
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x0018DE0682D8. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Level - Error
OpCode - IpAddressNotAssigned
Source - Dhcp-Client
After this, it connects by itself. I don't believe I have configured the 2Wire or Trendnet properly, so I need some guidance and suggestions on this matter.
Laptop - Intel Core Duo 1.66ghz, 2gb Ram, Win7 Professional with SP1, Intel PRO Wireless 3945ABG
2Wire - 192.168.1.254
Trendnet - 192.168.1.1
- I did not change the IP of the Trendnet and I am not sure if I have to.
From the 2wire - Private Network
Router/Gateway Address192.168.1.254
Subnet Mask255.255.255.0
Private Network DHCP Info
Range192.168.1.64 � 192.168.1.253
[code]....
Linksys Wireless Router :: E1000 Mac Doesn't Automatically Reconnect?
May 7, 2012I recently got an E1000 router brand new V2.1 from a friend. Seems to run great, only problem both my Mac Book Pros (running snow leopard and lion) will not reconnect automatically to the wifi after waking up from sleep.
View 1 Replies View RelatedHp Dv6449us - Wifi Disconnects And Won't Reconnect
Jul 31, 2011I have a problem with my laptop, it is an HP DV6449us with a broadcom wireless wifi card. My problem is, that my wifi will be working one second, and the next it will disconnect me, and wont let me reconnect! It will show me available connections, and will try to connect, but, fails. Usually happens when waking up from sleep, or using the laptop for long periods of time.
View 19 Replies View RelatedIpad 2 Doesn't Reconnect To Wifi
Oct 14, 2011iPad connects fine to WiFi leave it idle for 20mins and then when you wake it up, it doesnt reconnect. It is not just this 1 pad, i have about 20 users in the office with same problems.So far i have tried the following:
1. Update router firmware
2. Network initially had split up so each floor router was a DHCP server now only 1 DHCP server.
3. Test with different security WPA/WPA2 and No security.
4. Connect to different wireless router.
5. Try Apple's Airport but doesnt work in corporate enviornment(couldnt even get it working at home)
6. Try adjusting screen brightness (not in a million years is this a fix!!).
7. Static Addressing not an option as too many devices and it is not a fix.
Pc Lost Connection With Wifi After Installing A New Printer And Cannot Reconnect?
Jan 8, 2012went to uninstall the other two and then went to install our new one on the main computer.I have now lost connection with the wifi to this pc and only this one. (the internet still works on two laptops) unfortunately i need this computer for work and therefore need the internet quite urgently. Perhaps uninstalled something by accident and if so what is it and what can i download?
View 3 Replies View RelatedHow To Reconnect Asus Laptop To Wifi Internet Connection
Jul 25, 2011windows was unable to connect dlink (router) is message i receive on my laptop after setting my son's nintendo 3ds to the wifi connection. internet connection is otherwise fine on other devices in home.
View 1 Replies View RelatedAcer Tablet Cannot Reconnect To (Wifi) After System Restored To Default
May 17, 2012I have been using my ACER tablet with my Netgear router for several months with no problems at all. Then last night I decided to restore my tablet to its default settings, meaning that all my programs, apps, files, etc., were erased. Then I rebooted my tablet and started from scratch, entering the requested information. Everything appeared to be going just fine until I turned on Wi-Fi and attempted to connect to my network (Secured with WPA2), which was available and showed Good signal strength. I clicked on it, then attempted to enter my password. As soon as I entered the first digit of my password, the option to Connect to the Internet immediately disappeared, becoming greyed-out. Repeated attempts to connect failed for the same reason.
I called ACER Level 2 Support and tried a couple of procedures which didn't solve the problem. One was pushing the Reset Button twice. The technician told me that I may have a problem with my router settings. He suggested that I go to a local fast food outlet and see if I could connect there. I went to McDonald's and was able to get on the Net without using a password. I returned home and tried again to connect, but still was unable to enter my password.
Would it make sense for me to completely disconnect my router from everything, then reconnect and go through that set-up process all over again? I guess I would have to change my User Name & Password, or whatever is required. Also, if I go this route, should I change my security setting from WPA2 to a different option -- WEP, for example? I just don't want to foul things up to the point where my laptop wouldn't work. I doubt that would happen. I recently received the Ice Cream Sandwich upgrade which has been working satisfactorily; however, it does mean that I'm now attempting to start over from scratch with a different operating system.
Phone Not Connects Automatically To Wifi
Dec 30, 2012I have a home network using WEP 128-bit router and my phone is Motorola Atrix with AT&T. until I did the jellybean update to android my phone connected automatically with my home wifi but now it won't connect at all. In all other placed with wifi or hotspots it connects automatically and even with secure networks it saves the password and stays connected. I tried my local AT&T store and they said all my settings in the phone were right and suggested I reboot my router which I did. Nothing has corrected the problem. The wifi doesn't stay on long enough for me to put in my password to connect.
View 2 Replies View RelatedDisabled Internet Network - How To Reconnect
Mar 4, 2013I kinda accidentally disabled our internet network and I can't find a way to reconnect it with our adapter. I tried to troubleshoot it and also search for our device, and nothing seems to work.
View 8 Replies View RelatedHow To Reconnect Network Drive In Windows Vista
Sep 20, 2011I have a red x in "My Computer" at the network drive. cannot connect to it. what do you suggest. I am on a pere tp pere network
View 1 Replies View RelatedWindows 7 / Automatically Turn Off Wifi When Docking Laptop
Jan 10, 2012How do I automatically turn off Wi-Fi when docking Laptop
View 1 Replies View RelatedComputer Disappears From School Network - Cannot Reconnect To Printer
Mar 10, 2013win xp I work at a junior high school. A lot of the computers are part of a work group so they can share printers.
I'm having problems connecting to a printer. It has worked for a long time, it's still my default printer, but when I try to access it, it gives me a spooling error.
Now here's why I think it's a network problem.I can't access the main computer's network location (the one hooked up directly to the printer). All the other computers come up on the networkjust fine. And the one in question is only able to access very few computers in the network browser. let me simplify:
computer A/ brother printershared computer B/no longer sees A on network A/ sees only a small portion of other computers on network B/ sees all computers but A
Again, I don't think it's a spooler problem. It probably gives that error because it's a default printer with a lost connection.
Netgear WGR614v7 Laptop Drops From Network Won't Reconnect
Mar 7, 2011Netgear WGR614v7 Router.I have three computers wi-fi networked via the Netgear router: a laptop, a Mac Mini, and a XBox 360.About 30% of the time, when I wake my laptop up, it's been dropped from the network. The only thing that seems to allow it to connect again is if I unplug the power from the router and plug it back in again.This also happens to the XBox 360 once and a while. It never happens to the Mini. I suspect the Mini never gets dropped because it never gets turned off or goes to sleep.Some things I've tried to no avail:
- restarting my laptop
- manually reconnecting to the network via the icon in the system tray
- ipconfig /release, /renew
- disabling power management on my network adapter
- updating my router's firmware
My research keeps pointing to my router's "idle timeout" setting, though that may or may not actually be the problem. In my router setup, I currently have the "Does Your Internet Connection Require A Login?" setting set to No. When it's set to No, I do not have access to my Idle Timeout setting. If I set Login Required to Yes, I do have access to Idle Timeout, but none of my computers can connect, and I'm unsure how to get that working properly. I've read that if I set Idle Timeout to 0 (zero), it essentially never times out.
Dell :: 1525 Laptop Unable To Reconnect To Wireless Network After Reformat
May 30, 2012I have Inspiron 1525 with Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller. After reformat, the network will not detect wireless modem after I think I have downloaded all pertinent drivers. In Device Manager, under Other Devices, The Network Controller shows an exclamation mark that under Device Status says, "The drivers for this device are not installed. (Code 28) To reinstall the drivers for this device, click Reinstall Driver." I have turned on the button on the left of the laptop and still missing something.Prior to the reformat everything was working well. I had the Blue Screen of death andthat's the reason for the reformat.
View 15 Replies View RelatedHow To Automatically Connect To Network
Nov 7, 2012Why doesn't my PC automatically log into my wireless network when I turn it on,it try's to use a BT hotspot which is nothing to do with me so I have to manually select my network and log into it.How on earth do I stop this happening?
View 2 Replies View RelatedNetwork Drives Creating Themselves Automatically?
Nov 29, 2011I am having a problem in which when ever I check "Computer" later on in the day, one of the network drives is duplicating itself over and over using a different drive letter each time. By the end of the day if untouched I can have approx 20 of them!To give you more information about the scenario, the computer is on Windows 7 pro, it is on a domain in which the server is 2008 r2, there are 2 network drives in total (only one is duplicating), the only 2 changes I recall that may have caused it is box.net is running on the server syncing all content on the networks drives and a new printer has been added on the network.
View 5 Replies View RelatedWireless Network Connection Will Not Refresh Automatically?
Mar 10, 2011I've been having a problem with my wireless network connection. Whenever I try and hit the Repair function,it will get stuck on Renewing your IP address for a moment, then change to: Windows could not finishing repairing the problem because the following action cannot be completed: Connecting to the wireless network. I have internet connection on this same computer.Another point to make is that when I click Repair and navigate to the Network Connections window, then hit F5 ( refresh the window ), the wireless connection will quickly refresh and connect normally without error.I won't have to open the Network Connections page and hit F5 anytime I need to repair the connection? Also, as of right now, it's still "Acquiring network address" even though I'm connecting and typing this message.
View 10 Replies View RelatedOsx 10.5 How Do I Automatically Share External USB Drives Over Network
Jul 21, 2013I used to have an old G5 tower running OS X 10.5 (Leopard) which I was using as a file server. In this tower I had a USB dock connected where I could plug in 2.5 inch drives from my archive and then access them over the network by connecting to the G5.
Last week I upgraded my "fileserver" and I am running OS X Mountain Lion Server on a regular Mac Pro tower. When I connect to my new fileserver via Finder I am only able to see the local hard drives but none of the external ones. I can add a share-point for the external drives but that is not very practical since I am always connecting different drives from the archive.
So what I would like to have is that when I plug in an external drive to my file server it shows up in the network shares without me having to create a share-point for every different drive I connect.
Mapped Network Drive Not Automatically Re-connecting At Logon
Jun 10, 2011i have a user running Windows xp pro, the problem is one of his network drives does not re-connect at logon, all the other drives re-connect but for some reason this one does not, the network drive is on a windows server and does not require different logon credentials than his windows logon.
View 1 Replies View RelatedWindows Could Not Automatically Detect Network's Proxy Settings
Nov 26, 2011I am running Windows 7 and I use a ZyXEL ZyAIR G-220 Wireless USB adapter for internet. I had a virus called something like Cloud AV 2012 so I used Malware Bytes to remove it and it worked just fine. However, now the internet does not seem to work (there's that yellow triangle with the exclamation point) and when I try to run diagnostics, the message "Windows could not automatically detect this network's proxy settings" comes up. So far, I've tried rebooting, disabling proxies in all of my browsers, and running scans, And I also cannot system restore, because apparently windows security was turned off and there are no restore points
View 1 Replies View RelatedWindows 7 Could Not Automatically Detect Network Proxy Settings
Oct 20, 2011I'm on windows 7 btw.When I diagnose the problem it says: Windows could not automatically detect this networks proxy settings I'm connected to the internet via cable on my laptop. Yes I'm using a router. The other computers connected to the router can connect to the internet but mine can't. It also says "unidentified network - no internet access" when I click on the computer icon in the bottom right corner of the screen. until I downloaded from a music site which gave me the virus I think. Now, I'm not certain if the virus is removed or not. I tried system restore point but it won't even let me restore my computer anymore for some reason, maybe because of the virus.
View 19 Replies View RelatedWindows Could Not Automatically Detect Network Proxy Settings
Jan 5, 2013I'm using my old laptop now. On my regular laptop, my internet icon has the yellow triangle and when I trouble shoot it, the message says "Windows could not automatically detect this network's proxy settings".Recently I noticed my computer was heating faster (and hotter) than usual so I ran a search again and it said no threats were found. I have ran the search twice since then and still nothing. I was advised to use ccleaner,malwarebytes, and Super Anti-Spyware. It removed one other threat but the problem was still there. I then started using combofix, but I did not like the look of it so I stopped that scan. It seemed a little sketchy. As of this morning, I'm having the internet problem. My old laptop (the one I'm on now) and my girlfriend's laptop work fine. I connected it with the Ethernet cord and that didn't change anything. I have Windows 7. It's on a 2010 Samsung (I'm not very tech savvy so I'm not sure about all the other details).
View 14 Replies View RelatedHow To Automatically Detect New Network Card In CentOS 6 / RedHat
Sep 5, 2011I'm using CentOS 6 in a virtual environment. When cloning a virtual version of CentOS, the old eth adapters are "removed" and replaced with new ones and net MAC addresses. However, the ifcfg-ethn files still exist. I am trying to figure out how to get CentOS to automatically rescan & recreate the network adapters / eth files, just like it did on install. url...
I know there is a quick way to do this in the GUI, but we are using a server so GUI does not apply in this case.
however Kudzu has been removed as of Centos 5 so I would rather avoid that. There is a procedure that Linux runs on initial install - what that is so I can manually trigger it?
Store Emails Automatically On Network Drive After Been Read By User?
Jul 24, 2012Is it possible to have emails stored automatically on a network drive after email is been read by the user? I know for sure that on a mailserver there is a feature that can be set up to have a copy stored and than send it to the users application.
View 1 Replies View RelatedLinksys Wireless Adapters :: AE1000 Doesn't Automatically Connect To Network
Mar 15, 2011So my AE1000 adapter doesn't connect to my network after waking my computer up from standby mode. I tried disabling the power management option where it allows you to turn off the device to save power but it still won't automatically connect to my network. I have to manually remove the adapter from the usb port and plug it back it for it to work again. I'm using Windows 7 64 bit,the latest drivers from Cisco's website, and my anti virus program is Microsoft Security Essentials
View 4 Replies View RelatedAsus X5DIJ Laptop - Windows Could Not Automatically Detect Network Proxy Settings
Apr 20, 2012The other day i was on my mums laptop (ASUS X5DIJ) at her house all working fine the battery died so i plugged it in and started it up again however the charger cant have been fully connected and once back in windows the battery died again on the next boot i noticed windows said it had found the system CMOS/real time clock and had installed drivers for it. checked the driver details it says no driver files are required just like it should ever since then it connects to the network but will not connect to the internet at her house or at mine through wireless and ethernet cable although all other computers work fine windows troubleshooter says "Windows could not automatically detect this networks proxy settings"
I've tried
resetting routers and laptop = no change
netsh winsock reset and netsh int ipv4 reset = no change
ipconfig /flushdns = no change
ipconfig /registerdns = no change
[code]....
How To Reconnect Internet To Computer
Oct 25, 2011I have internet on my computer at home and i have unpluged the computer and moved in to another room it is saying that i need to reconnect the internet.
View 1 Replies View RelatedCisco VPN :: ASA 5505 Does Not Reconnect
Feb 28, 2012I have a remote ASA 5505 running 8.3(2) that establishes a site to site VPN to a central ASA 5520 running 8.4(2) immediately upon startup. Then within a random interval ranging from 5 seconds to an hour, the VPN loses the connection, and is not reconnected. Only a reload of the remote ASA will reestablish the VPN tunnel. Then everything is fine until the next disconnection. Both sides have matching lifetimes, and keep alives are enabled on both sides. The debug from the remote ASA is attached, showing what happens through several disconnect/reload sessions.
View 2 Replies View RelatedInternet Will Disconnect And Then Reconnect Constantly?
Jan 8, 2011My Internet will disconnect & then reconnect constantly. I have 2 laptops & they are both on my home network & I have no trouble with the other one so I assume there is nothing wrong with both the Internet service & router. The laptop with the problem is an acer/aspire 5720z. The Wireless Network Adapter is a Atheros AR5007EG. When I go to the Adapter Properties the status reads "The device is working properly". When I go to Control Panel>Network & Sharing Center my Wireless Network Connection Signal Strength reads Excellent. The operating system is Windows Vista Home Premium.
View 5 Replies View RelatedPPPoE Will Not Reconnect Without System Restart
Jun 14, 2012I am in a third world country (Thailand) with ADSL service and getting customer support is difficult to say the least.The connection is constantly dropping but the real problem lies in that i can not reconnect unless i restart my computer.
View 8 Replies View RelatedWrt400n Disconnect / Unplug To Reconnect
Apr 29, 2012The wrt400n works fine. Except randomly every day or every other day, laptops cannot connect to the router. Router lights are still on, blinking, etc, no change there. Releasing/renewing IP doesn't work. Turning off wireless radio on laptop and back on doesn't work.Unplugging and replugging in the router DOES work, and laptops can connect to the router again.Router is updated to 1.0.02 firmware, sine I thought that was the problem, but after firmware update, problem is still occurring.Wireless is set to mixed,channel width is auto?
View 14 Replies View Related
