i have a user running Windows xp pro, the problem is one of his network drives does not re-connect at logon, all the other drives re-connect but for some reason this one does not, the network drive is on a windows server and does not require different logon credentials than his windows logon.
View 1 Repliesmapped network drive getting disconnected always.is there any batch file available to check the status every minute whether the drive is connected or not??
View 1 Replies View RelatedI am having an issue with 3 xp pc's in my network loosing connectivity to the file server. There are 4 network drives mapped to a win 2k3 server, when the user logs in everything is fine, after a while the network drives become unreachable and gives the following error - An error accrued while reconnecting (drive letter) to \servershare Microsoft windows network: The local device is already in use The connection has not been restarted” This happens from any user on only 3 boxes. The rest of the network is fine. These 3 are networked via a switch, I swapped that out for another hoping that might fix it, but nothing.
The other odd thing is the same time that the network drives error out it seems that DNS stops resolving anything outside my network. I can still ping the router and other pcs on the LAN but DNS fails to resolve any names for IE, and nothing outside the LAN can be pinged, no Google, no 8.8.8.8. How ever restarting fixes the issue for a short while. There have been no network changes and all systems are fully up to date as far as patches go. I was thinking it's got to be a ether a DNS issue (the file server is also the Active Directory Domain controller) or something in to do with the router/fire wall we use (it's a Cisco ASA 5005).
We have 4 computers that all run new versions of Windows 7. Each have been connected to a Mapped Network Drive and they all connect fine to the network. Dragging files throughout windows works fine. When we try to attach a file from the network in the browser (as in a GMail message) or upload a file with FTP it disconnects us from the network and from the Internet.This only happens with 2 of the 4 computer.
View 2 Replies View RelatedI have a windows 7 desktop with an SSD and regular mechanical hard drive where I keep my data. I also have a laptop with a small SSD as well. I wanted to keep the laptop free of non-critical data so I decided to setup a file share between my desktop (Windows 7 home prem) and my laptop (Windows 7 pro). I was able share the files and navigate to my desktop through my laptop. I successfully mapped the folder as a network drive and all was well. Then I rebooted and I was disconnected from it, it remembered that it was there but I needed to manually connect to it and I needed to provide my login credentials. There is no password just a username.
What is causing this and is there a way to get around this? Also is there a way to set a timeout because if my desktop is not on and I want to use my laptop, the boot times are much longer compared to when I don't have the mapped network drive on my laptop at all.
I got a strange incident happening to my work computer. Whenever i step away from my desk and come back only to find Icons of files mapped to other network drives other than my local drive have disappeared from desktop. I have to restart my computer to get these back. It only happens when i have walked away from my PC and I have verified that no one has sat at my desk to use my computer while I'm away. The other PC are also networked to the same servers as mine and theirs are not affected at all.
View 1 Replies View RelatedI have a Gaming Computer, with a 2x2TB RAID-1 setup, which I use to store .iso files ripped off my game's / movie's disks..Most of the time I'm on my laptop, I have set up a Network Drive to this RAID-1 setup, but when I try to transfer files from the Gaming Computer to my laptop via a network connection, either by wireless G, Ethernet 100mbps, or Ethernet 1gbps, my files get corrupted, this usually happens to larger files e.g over 1GB..But when I transfer the same files to my external hard-drive the files work properly....My computers is networked by a TP-Link 340G....
View 4 Replies View RelatedIs it possible to have emails stored automatically on a network drive after email is been read by the user? I know for sure that on a mailserver there is a feature that can be set up to have a copy stored and than send it to the users application.
View 1 Replies View RelatedI am trying to run program that will only allow local drives for data no mapped drives. My question is can a mapped drive be made to look like a local drive?
View 1 Replies View Relatedi have shared 4 network drive in my client computer but sometime when we leave computer on for a couple of hours and then try to access the drives then it shows the message "network drive is not available" the only way to access the drive is to restart computer.
View 1 Replies View RelatedWe are running about 75 computers in a network. We have a server here where all the clients have a shared folder that we map for them, but as soon as they restart their laptop, the map drive disappears. We are running a script that we tested on a network where the laptops were linked with a cable, but as soon as you switch over to wireless it disappears.
View 1 Replies View RelatedI have an HP Pavilion dv7 laptop running Windows 7 (64bit) SP1. Recently, my computer was attacked by some really nasty malicious software. Nasty enough that it not only got past my security software, it permanently disabled it.I was still unable to repair/replace my security software. Finally, the support tech just gave up on me, and I ended up utilizing the restore feature provided by HP to restore my laptop, supposedly to factory condition. After the restore, everything works great except for my mapped drive.
View 19 Replies View RelatedI have a desktop and a laptop. I'm trying to share my external HD from my desktop, to my laptop.What I did was gave the local administrators group full share permissions to the drive, and of course the local administrators group also has full NTFS permission.That being said, I went to my laptop and did a Code:net use X: \mydesktopexternal /user:mydesktopuser PasswordExternal is the share name for the external HD on my desktop. The command worked successfully, however, I am still getting Access Denied when trying to get inside of this mapped drive.How and why does the command map the drive properly, using those credentials, but there's no access when trying to navigate to it? It works if I give Everyone full share permission, but I don't want anyone to just connect to it. Use password protection file sharing is enabled, but of course with "Everyone" given permission, that won't apply (at least to my knowledge).
View 7 Replies View RelatedI have a domain with a domain controller Server 2003. I have a backup dc running an application with server 2008. The shared folder I am trying to access is on an nt server 2000. We have had a mapped drive "I:" and have used it for years. Our copier also scans to a shared folder on the server 2000 machine. All of the desktop systems are xp sp3 with one W7 machine. A couple of weeks ago when user attempted to access the shared/mapped drive, an error would occur that "the drive was in use and they could not be logged on". Sometimes the error would say "you don't have permission to access the drive." Mind you no settings have been changed on the network. When either of these errors would occur it would occur for everyone but if I rebooted the server everyone could connect again. The same errors would occur the next day or 6 - 8 hour later. Now the error has occured "Drive is already in use and you cannot be logged in" (I have tried drive Z as well the drive is not in use) and restarting the serever no longer works. No one can access the shared drive. I have unmapped the drive on my system and have attempted to reconnect, I enter the path and check reconnect at logon and it asks for a password. I enter the administrator password (which is what I always used) and it just pops right back up asking for a password as if I entered nothing. I can ping the server with the shared folder and even logon remotely so I know it is not a physical disconnect. I am not sure what changed and have followed many suggestions found to no avail. We cannot access the shares or scan.
View 1 Replies View RelatedI have an external hard drive that I used with my oldest laptop, windows XP. I have a newer desktop and laptop that are both running windows 7. I hooked my external drive to the desktop via USB port and want to be able to access from the other 2 laptops as well.
View 1 Replies View RelatedI recently purchased a NAS enclosure to use my WD IDE hard drive as a networked drive. I configured the hard drive's jumper setting as single (no jumper). I installed the hard drive in the enclosure and connected the Cat 5e cable to the back of the DIR-655 router. When I tried mapping to the drive, I receive the error:
\STORAGE-3B25 is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Network error (1208).
I suspect perhaps that I might need to change a setting on my router to allow me to access the NAS. The NAS ip address is visible on the router's admin page and I am able to see it when searching for network drives in my laptop. But I just somehow can't connect to it. I am running Windows 7 Professional 32-bit.
Logon failure: The user has not been granted the requested logon type at this computer" Im having this same problem on two computers. One running windows vista ultimate 64bit and windows 7 home premium 32 bit to windows server 2008 r2 64 bit?
View 3 Replies View RelatedI am trying to get anyconnect 3.0.07059 to run start before logon on windows 7 connecting to an ASA5540 running firmware 8.2.
The anyconnect starts fine, but will not connect. If I login to the laptop then run the anyconnect , same setup it connects fine.
My boss's old Windows XP laptop was able to connect to open wireless networks automatically so he never had to click that icon on the bottom right to check signals or anything like that. Is there anything like that I could set up on Windows 7?
I realize that this is not secure and very silly. I suggested choosing the best and trusted networks available. My boss, however, doesn't want to accept that he should have to go through more steps with newer technology. So in this case, I'd just like to give him what he's asking for.
I recently went through removing some trojan files and malware on my computer with Kevin over in the Virus and Malware Removal section and my computer but the one thing that is not the same now is my wireless internet connection. I have a Netgear wireless adapter. Before I was using the Netgear utility to connect and now that's not even opening at startup just using the Windows Internet Connection utility, which is fine with me but it just won't connect automatically at startup. I have to go manually hit connect and enter my key for it to connect.
[URL]
I use CISCO VPN 5.0.07.0290 to connect to my office Network from the wireless internet connection at home. Whenever i Cisco VPN client, my internet is getting disconnected automatically within few minutes. This is happening only when i tried to connect from my home.
View 2 Replies View RelatedI have several computers on a network hooked to a server. All of these computers are running XP and have are mapped to a drive on my server. The problem is, once in a while the mapped drive will suddenly not be there. I can manually remap them and sometimes I have to remap 2 or 3 times before it keeps.
View 5 Replies View RelatedI have an issue in my office on Wireless Account?We have 5 Cisco (1242AG) Wireless Access points (AIR-LAP1242AG-A-K9) Connected to 1 Wireless Lan controller 4402 in 1 Site one user Wifi account alone keeps on disconnecting & connecting automatically , Confirmed there is no Desktop Wireless issue , Since whatever device(laptop, Iphone, desktop) he logins Same problem occurs.This problem started 2 weeks back only, before that there is no issue, Coonection & disconnection occurs more on monday.Error showing When Disconnecting : Cannot connect to wether(ssid)
View 6 Replies View RelatedI have two Windows 7 Ultimate computers and around 10 Windows XP (Home and Professional, SP2 and SP3) computers trying to connect to it. It's just a LAN (no internet access).I have set all of the password-protected sharing off on the Win 7 systems. I have tried opening up ALL of the permissions and such (since security is not really an issue).When I try to map the network drive, it won't let me merely connect to it. So, I have to click map network drive on the XP computer and hit "login with other credentials" and enter the username/pass for the user account on the Win 7 machine (we'll say Bob for user and Smith for password for the sake of example). It will mount the share (which is actually the C: root of the drive) just fine.
The only problem is the moment you restart the Windows XP system, it will lose the connection. My fix for it was to create a .bat file that contained the following: [code] I put it in the Progam FilesStartup folder to run upon boot. For the most part, it seems to work after a fashion. Some of the computers, though, will drop the connection to the two Windows 7 systems and need to be rebooted 1-2 times before they get it back again. Even clicking the .bat file manually will have the same result (you will have to reboot) if it drops the connection while you're using it. Plus, sometimes it doesn't map the drive correctly (I assume because the batch file is running before the connection has a chance to initialize on the LAN).I've also tried adding an "Everybody" user to the permissions on the Win 7 systems with full access, but it only seemed to cause problems with the existing connections.It might also be prudent to mention that both the Windows 7 and Windows XP systems are all 32 bit. I've also disabled the firewalls on the two Windows 7 systems. Neither of them have any antivirus or security software installed.
I have an annoying problem with networked printers disconnecting/disappearing when TS users logoff. Current configuration is: SQL server (WinSvr 2K8 R2 Std) has printers installed on it (standard TCP/IP Port) and printer is shared, there are also some printers installed on the DNS server and a couple of satellite offices. Users connect to TS servers (WinSvr 2K8 R2 & WinSvr 2K3) printers are connected and work fine until they logoff, when they log on the printers are gone "sometimes some printers are still there!?" I have tried logging onto the server as domain administrator and connecting printers but they won't even stay for administrator (have had this with win7 client machines) and tried directly 'console' at the server. I have looked at the printers on the SQL server and sharing properties, it is stoping printers from coming back at login on TS Note that local (client machines) connecting to the same shared printer from the SQL server don�t have the problem it's just on the TS server.
View 2 Replies View RelatedWe are having some issues between our (2) Windows 2003 Storage servers and Windows 7 client machines. The issue that is occuring is that the users indicate they temporarily loose network connection to their mapped drives on these servers. This may happen several times a day. The regional manager wants to say it's a network issue but I believe it's something b/t the server and workstation.I like to know if there are some additional parameters, debugging or configuration that might be recommended to perform on our (4) Cisco 3750G-48port POE switches (stacked) that would determine that it's not a network issue. I do not see any errors or collisions on the ports that the servers are connected nor am I seeing much of anything wrong with the user ports. There are only 3 vlans at this office, vlan 30=users, vlan 20=servers, vlan 40=mgmt.
View 7 Replies View RelatedMy Linksys WRT120N router was working fine for all of 1 and 1/2 months and suddenly it stopped making the internet connection. At first nothing could access the internet but now that I've reset the router (via the little reset button in the back) my Kindle can access the wireless, but of course no password etc. I actually don't know how to put back the username and password for it. When router is connected: When I troubleshoot the connection by clicking on "Repair Connection" it takes about 2-5 mins "obtaining a new network address" then I get an error saying "The wired connection to your router was not automatically repaired. X Local network: Not connected.
View 14 Replies View Relatedwhat is the difference between network drive and map drive?
View 1 Replies View RelatedI have a Netgear Rangemax Dual Band Wireless-N Gigabit Router (model WNDR3700). I used to live in a small place so I connected my external hard drive direct to my laptop. However, now that I have a bigger place i want to connect the ext hard drive to the router so I can take my computer where I want. However, I cannot connect the hard drive to the router. I can plug it into the router, of course, but it will not appear under the Network folders (I use Window's Vista).
View 1 Replies View Relatedi have an Iomega Prestige Desktop External Hard drive usb 2.0.I also have a quest-centurylink ZyXEL modem model #PK5000Z.I would like to connect the iomega to the modem. However, I don't see a usb port on the modem.
View 1 Replies View RelatedWhy doesn't my PC automatically log into my wireless network when I turn it on,it try's to use a BT hotspot which is nothing to do with me so I have to manually select my network and log into it.How on earth do I stop this happening?
View 2 Replies View RelatedI am having a problem in which when ever I check "Computer" later on in the day, one of the network drives is duplicating itself over and over using a different drive letter each time. By the end of the day if untouched I can have approx 20 of them!To give you more information about the scenario, the computer is on Windows 7 pro, it is on a domain in which the server is 2008 r2, there are 2 network drives in total (only one is duplicating), the only 2 changes I recall that may have caused it is box.net is running on the server syncing all content on the networks drives and a new printer has been added on the network.
View 5 Replies View RelatedHow to reconnect to Wi-Fi network automatically
View 1 Replies View Related