I kinda accidentally disabled our internet network and I can't find a way to reconnect it with our adapter. I tried to troubleshoot it and also search for our device, and nothing seems to work.
View 8 RepliesMy pc is connected to a server that has internet access, but they are blocking the internet on me?
View 3 Replies View RelatedI have internet on my computer at home and i have unpluged the computer and moved in to another room it is saying that i need to reconnect the internet.
View 1 Replies View RelatedHow to reconnect to Wi-Fi network automatically
View 1 Replies View RelatedMy Internet will disconnect & then reconnect constantly. I have 2 laptops & they are both on my home network & I have no trouble with the other one so I assume there is nothing wrong with both the Internet service & router. The laptop with the problem is an acer/aspire 5720z. The Wireless Network Adapter is a Atheros AR5007EG. When I go to the Adapter Properties the status reads "The device is working properly". When I go to Control Panel>Network & Sharing Center my Wireless Network Connection Signal Strength reads Excellent. The operating system is Windows Vista Home Premium.
View 5 Replies View RelatedWhen doing anything on my PC, gaming, browsing, whatever, I will have random disconnects for a few seconds and it will reconnect. I don't get the "your network cable has been unplugged" message, it just stops working for a second or two and starts working again. This has been happening for a few months after a fresh install of windows xp and I haven't really tried to fix it.Every other computer in the house is fine except this one, it can't be the modem because a new one was installed a few days ago and its the same problem. The router was reset within the last week as well. I think the problem is with this computer alone but I don't know where to look. The problem didn't happen for a few days after I put a new network card in, but soon after it continued happening. I also have tried a few different CAT5 cables, even the XBOX one but nothing resolved the issue.
View 4 Replies View RelatedI have a red x in "My Computer" at the network drive. cannot connect to it. what do you suggest. I am on a pere tp pere network
View 1 Replies View RelatedCannot reconnect to the internet after reinstalling Windows XP SP2 on HP DC7100 SFF. Internet connection is via switch to modem to cable. Working fine previously, and other computer connected to switch still working fine?
View 7 Replies View RelatedI have ASA5540 running IOS 8.04-K8, users are able to connect VPN over the internet but unable to re-connect VPN when users disconnected abnormally (abnormally means they are not disconnecting VPN manually, while disconnecting manually no problem occur). ASA showing an active session of the disconnected user and user having reason 433 while re-connecting VPN.
View 11 Replies View Relatedwin xp I work at a junior high school. A lot of the computers are part of a work group so they can share printers.
I'm having problems connecting to a printer. It has worked for a long time, it's still my default printer, but when I try to access it, it gives me a spooling error.
Now here's why I think it's a network problem.I can't access the main computer's network location (the one hooked up directly to the printer). All the other computers come up on the networkjust fine. And the one in question is only able to access very few computers in the network browser. let me simplify:
computer A/ brother printershared computer B/no longer sees A on network A/ sees only a small portion of other computers on network B/ sees all computers but A
Again, I don't think it's a spooler problem. It probably gives that error because it's a default printer with a lost connection.
Netgear WGR614v7 Router.I have three computers wi-fi networked via the Netgear router: a laptop, a Mac Mini, and a XBox 360.About 30% of the time, when I wake my laptop up, it's been dropped from the network. The only thing that seems to allow it to connect again is if I unplug the power from the router and plug it back in again.This also happens to the XBox 360 once and a while. It never happens to the Mini. I suspect the Mini never gets dropped because it never gets turned off or goes to sleep.Some things I've tried to no avail:
- restarting my laptop
- manually reconnecting to the network via the icon in the system tray
- ipconfig /release, /renew
- disabling power management on my network adapter
- updating my router's firmware
My research keeps pointing to my router's "idle timeout" setting, though that may or may not actually be the problem. In my router setup, I currently have the "Does Your Internet Connection Require A Login?" setting set to No. When it's set to No, I do not have access to my Idle Timeout setting. If I set Login Required to Yes, I do have access to Idle Timeout, but none of my computers can connect, and I'm unsure how to get that working properly. I've read that if I set Idle Timeout to 0 (zero), it essentially never times out.
windows was unable to connect dlink (router) is message i receive on my laptop after setting my son's nintendo 3ds to the wifi connection. internet connection is otherwise fine on other devices in home.
View 1 Replies View RelatedEvery two or three days I'm unable to reconnect to my wifi network when I turn on my Windows 7 laptop or Android tablet. I have to power cycle the wifi router to get the connection again. This usually happens after I haven't used either device for a day or two. The connection usually does not drop when I'm using them. Restarting the computer or the tablet does not work and using the Windows troubleshooter (or the android app for wifi issues on the tablet) also doesn't work. Both computer and tablet recognize the network and say the signal is strong but won’t connect to it. There are no physical obstructions. I have no problem with my internet connection (cable modem). The problem really seems to be with the wifi router.
Model name: Linksys E1000
Model number: E1000
Firmware version: 2.1.02 build 5
Operating system: Windows 7 SP 1
Software version: 1.3.11069.2
Connection type (WAN): DHCP
I log onto other wireless networks the first time by inputting their passwords. My iphone then always automatically reconnects wirelessly to them without have to input the password again. The phone can be asleep for a few minutes or I can be gone for a month. The phone always automatically remembers & reconnects to these networks.However, it doesn't work that way with my d-link system @ home. Everytime the phone sleeps and I wake it up, the wireless connection is lost. There is no automatic reconnection. I have to input the password each time in order to re-establish the wireless link. My printer and laptop seem to stay connected. d-link settings I need to change in order to get my iphone to automatically connect all the time?
View 7 Replies View RelatedI have Inspiron 1525 with Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller. After reformat, the network will not detect wireless modem after I think I have downloaded all pertinent drivers. In Device Manager, under Other Devices, The Network Controller shows an exclamation mark that under Device Status says, "The drivers for this device are not installed. (Code 28) To reinstall the drivers for this device, click Reinstall Driver." I have turned on the button on the left of the laptop and still missing something.Prior to the reformat everything was working well. I had the Blue Screen of death andthat's the reason for the reformat.
View 15 Replies View RelatedMy system problem is after starting the computer within 5minits network services are disabled and network path not connected but communication is working when i am testing the ping command.
View 1 Replies View RelatedI have a desktop computer that I have used for years and it has always worked just fine. We have AT&T (DSL, not cable) and it used to connect just fine but then I moved out, left everything plugged in exactly as it was and when I came back it wouldn't connect.It connects to the LAN but not to the internet. When I go in cmd to type ipconfig the DNS suffix is blank on that computer but says gateway.2wire.net on my wireless laptop. I eventually disabled UPnP on it because that's what alot of people were saying fixed the problem but it didn't fix anything. All it did was make the Internet Gateway Connection box disappear.Originally it was plugged in like so: Cable from wall > Cable Box > PC Now it is hooked up like this: Data cable from wall > DSL > Router > PC It stopped working BEFORE it was switched to DSL so that isn't the problem The DSL we have is "AT&T 2701HG-B 2Wire Wireless Gateway DSL Router Modem" and the Router it is plugged into that goes to my PC is a Linksys Wireless Router Model WRT54GS The PC is Windows XP Home, SP2?
View 19 Replies View RelatedI am using Windows 7, suddenly my network adapter has been deleted and i am unable to use Internet
View 7 Replies View Relatedmy laptop can't connect to a wireless network, so I have to keep it in one room connected to the modem. When I unplug it, even with the wireless switch on, it loses the connection. When I use ConfigFree, it says the wireless network device is disabled. I went to device manager and updated the driver for the network adapter, and it still said it was disabled. What should I do now?
View 6 Replies View RelatedIam unable to share my internet connection.I am unable to use it on a router even.When i connect it to my laptops Ethernet port its working fine.But when i connect it via router its just showing internet access but i m unable to open any pages.
View 1 Replies View Relatedvirus disabled my Network adapters and my internet dongle is "unavailable".....i removed all viruses but i m not able to use my LAN, Wifi, Bluetooth, Internet Dongle etc...
View 1 Replies View Relatedok i got a toshiba a15-s129 and yet its not enabled the wifi .. the light is amber and i got the module drivers and the function keys .. i hit the function + f8 yet nothing and i also have the software for atheros and yet it says wireless network interface disabled? any clue on how to enable this wireless or how to disable the hotkeys so it will not find any settings for it ...?
View 1 Replies View RelatedI am having a HP Laptop with Windows Vista 64 bit OS. Since today I am having problem with my wireless network adapter card. It is remaining disabled and not getting enabled. I uninstalled the driver as well as disable the card but it is not working. The problem is Quick launch button on HP laptop for wireless card is showing as enabled but my network center shows it as disabled.
View 1 Replies View RelatedI have reinstalled windows 7 on my laptop. the problem is that the wi-fi internet is not working anymore. The network icon in the system tray shows a cross sign with a red color. I cant seem to be able to find a solution. Tried all the solutions listed in the forum. When i connect the lan cable directly into the laptop the internet works fine. But as soon as i remove it the cross sign again comes and i cant have internet access. I am having an Atheros Ar9285 Wireless Network Adapter installed in my device manager and everything is fine there with no ? or ! marks. I am using a Belkin router with in built modem.
View 1 Replies View RelatedI just purchased an AE2500 today for my desktop computer because my router is in another room. I am running Windows 7 64 bit. I tried installing the software from the disk first and it would not detect the adapter. But Windows did detect the device and I was able to manually install the drivers and in the control panel it says the device is working properly. When I go to the network sharing center no network is detected I then go to the netwokr adapters and the device is disabled. I try enabling the device and it will not. So then I go and boot in to Windows 8 RC and the device is detected and works fine and everything seems fine. I downloaded the driver from the website tried uninstalling the driver and reinstalling it with the downloaded version and still a no go.
View 6 Replies View RelatedI had to restore my laptop yesterday and i reset my router (WRT100). I ran all the Microsoft updates, but I didn't do anything with the router other than going to the Linksys site to try to make it secure. My computer seems to be recognizing the router (although it is still saying it is an unsecured connection) but I cannot get on the internet. The problem seems to be when I pull up the Network Connections window the "Internet Gateway-Internet Connection" is showing disabled. I cannot enable.Everytime I try, it says "connecting...Connection failed!". I can plug the ethernet from the modem to the computer and it works and the "Internet Gateway" doesn't appear, but when I try through the router it does. I want to set up the router because I have two computers that need internet access.
Three connections are listed--Wireless Access, LAN, and 1394 Connection. All are listed as connected, firewalled.The second computer is also giving me a problem. There is the wireless issue, but when I connect the ethernet from the computer directly to the modem I am asked if I want to connect via Broadband and am asked for a username/password. There is no username/password. I've contacted my ISP (Cox cable) and confimred there is no password.
Here is where I want to go:
Windows server 2008 (providing DHCP and DNS) 192.168.89.1 on all
Cisco SG 300-20 (switch) 192.168.89.3
all Clients(15 x DHCP assigned IPs) connected to switch
WRT300N(192.168.89.2) connected to switch
Internet modem connected to WRT300N
To achieve this I need to disable DHCP on the WRT300N, since my server is providing DHCP.The issue I have is that when I disable DHCP at the WRT300N, I lose internet connection (connected to either switch or direclty to WRT300N).
I purchased a Linksys EA3500 about two months ago, brought it home and set it up with my DSL provider and everything was great, until sometime last week, and since then my download speeds have just plummeted to basically nothing. I did some troubleshooting but I cannot seem to find what the issue is. I have checked all the cables etc, and I know that it is definitely something with the router itself..My current Speedtest.net speeds are as follows (I am paying for a 5mb connection) with the EA3500.Ping of 15ms Download speed of .67mbps, Upload speed of .60mbps.When I remove the router and hook straight to the DSL modem I get the following results.Pink of 12ms Download speed of 4.89mbps, Upload speed of .60mbps
- I have tried to reset the router both by holding the reset button and through the configuration application.
- I have enabled and disabled wireless to see if that was slowing things down
- I have plugged in my old WRT54G and I get the 12ms, 4.89mbps,.60mbps results on it (so I know its the EA3500)
- I tried putting the computer in the DMZ
- I have changed the ports that the computer is plugged into
- I have disabled and enabled IPV6 on both router and network card
- Firmware version - 1.1.38.134141
I have a remote ASA 5505 running 8.3(2) that establishes a site to site VPN to a central ASA 5520 running 8.4(2) immediately upon startup. Then within a random interval ranging from 5 seconds to an hour, the VPN loses the connection, and is not reconnected. Only a reload of the remote ASA will reestablish the VPN tunnel. Then everything is fine until the next disconnection. Both sides have matching lifetimes, and keep alives are enabled on both sides. The debug from the remote ASA is attached, showing what happens through several disconnect/reload sessions.
View 2 Replies View RelatedI have a problem with my laptop, it is an HP DV6449us with a broadcom wireless wifi card. My problem is, that my wifi will be working one second, and the next it will disconnect me, and wont let me reconnect! It will show me available connections, and will try to connect, but, fails. Usually happens when waking up from sleep, or using the laptop for long periods of time.
View 19 Replies View RelatediPad connects fine to WiFi leave it idle for 20mins and then when you wake it up, it doesnt reconnect. It is not just this 1 pad, i have about 20 users in the office with same problems.So far i have tried the following:
1. Update router firmware
2. Network initially had split up so each floor router was a DHCP server now only 1 DHCP server.
3. Test with different security WPA/WPA2 and No security.
4. Connect to different wireless router.
5. Try Apple's Airport but doesnt work in corporate enviornment(couldnt even get it working at home)
6. Try adjusting screen brightness (not in a million years is this a fix!!).
7. Static Addressing not an option as too many devices and it is not a fix.
I am in a third world country (Thailand) with ADSL service and getting customer support is difficult to say the least.The connection is constantly dropping but the real problem lies in that i can not reconnect unless i restart my computer.
View 8 Replies View RelatedThe wrt400n works fine. Except randomly every day or every other day, laptops cannot connect to the router. Router lights are still on, blinking, etc, no change there. Releasing/renewing IP doesn't work. Turning off wireless radio on laptop and back on doesn't work.Unplugging and replugging in the router DOES work, and laptops can connect to the router again.Router is updated to 1.0.02 firmware, sine I thought that was the problem, but after firmware update, problem is still occurring.Wireless is set to mixed,channel width is auto?
View 14 Replies View Related