I am in a third world country (Thailand) with ADSL service and getting customer support is difficult to say the least.The connection is constantly dropping but the real problem lies in that i can not reconnect unless i restart my computer.
View 8 RepliesI haven't really allowed this to bug me too much, but I went over by a friend's house, used his WiFi, closed my Laptop, it disconnected, I reconnected to his network, came back home, now every time I restart or Shutdown my computer I have to reconnect, not that big of a deal
View 5 Replies View RelatedI have been using my ACER tablet with my Netgear router for several months with no problems at all. Then last night I decided to restore my tablet to its default settings, meaning that all my programs, apps, files, etc., were erased. Then I rebooted my tablet and started from scratch, entering the requested information. Everything appeared to be going just fine until I turned on Wi-Fi and attempted to connect to my network (Secured with WPA2), which was available and showed Good signal strength. I clicked on it, then attempted to enter my password. As soon as I entered the first digit of my password, the option to Connect to the Internet immediately disappeared, becoming greyed-out. Repeated attempts to connect failed for the same reason.
I called ACER Level 2 Support and tried a couple of procedures which didn't solve the problem. One was pushing the Reset Button twice. The technician told me that I may have a problem with my router settings. He suggested that I go to a local fast food outlet and see if I could connect there. I went to McDonald's and was able to get on the Net without using a password. I returned home and tried again to connect, but still was unable to enter my password.
Would it make sense for me to completely disconnect my router from everything, then reconnect and go through that set-up process all over again? I guess I would have to change my User Name & Password, or whatever is required. Also, if I go this route, should I change my security setting from WPA2 to a different option -- WEP, for example? I just don't want to foul things up to the point where my laptop wouldn't work. I doubt that would happen. I recently received the Ice Cream Sandwich upgrade which has been working satisfactorily; however, it does mean that I'm now attempting to start over from scratch with a different operating system.
I have internet on my computer at home and i have unpluged the computer and moved in to another room it is saying that i need to reconnect the internet.
View 1 Replies View RelatedI have a remote ASA 5505 running 8.3(2) that establishes a site to site VPN to a central ASA 5520 running 8.4(2) immediately upon startup. Then within a random interval ranging from 5 seconds to an hour, the VPN loses the connection, and is not reconnected. Only a reload of the remote ASA will reestablish the VPN tunnel. Then everything is fine until the next disconnection. Both sides have matching lifetimes, and keep alives are enabled on both sides. The debug from the remote ASA is attached, showing what happens through several disconnect/reload sessions.
View 2 Replies View RelatedI have a problem with my laptop, it is an HP DV6449us with a broadcom wireless wifi card. My problem is, that my wifi will be working one second, and the next it will disconnect me, and wont let me reconnect! It will show me available connections, and will try to connect, but, fails. Usually happens when waking up from sleep, or using the laptop for long periods of time.
View 19 Replies View RelatedMy Internet will disconnect & then reconnect constantly. I have 2 laptops & they are both on my home network & I have no trouble with the other one so I assume there is nothing wrong with both the Internet service & router. The laptop with the problem is an acer/aspire 5720z. The Wireless Network Adapter is a Atheros AR5007EG. When I go to the Adapter Properties the status reads "The device is working properly". When I go to Control Panel>Network & Sharing Center my Wireless Network Connection Signal Strength reads Excellent. The operating system is Windows Vista Home Premium.
View 5 Replies View RelatediPad connects fine to WiFi leave it idle for 20mins and then when you wake it up, it doesnt reconnect. It is not just this 1 pad, i have about 20 users in the office with same problems.So far i have tried the following:
1. Update router firmware
2. Network initially had split up so each floor router was a DHCP server now only 1 DHCP server.
3. Test with different security WPA/WPA2 and No security.
4. Connect to different wireless router.
5. Try Apple's Airport but doesnt work in corporate enviornment(couldnt even get it working at home)
6. Try adjusting screen brightness (not in a million years is this a fix!!).
7. Static Addressing not an option as too many devices and it is not a fix.
The wrt400n works fine. Except randomly every day or every other day, laptops cannot connect to the router. Router lights are still on, blinking, etc, no change there. Releasing/renewing IP doesn't work. Turning off wireless radio on laptop and back on doesn't work.Unplugging and replugging in the router DOES work, and laptops can connect to the router again.Router is updated to 1.0.02 firmware, sine I thought that was the problem, but after firmware update, problem is still occurring.Wireless is set to mixed,channel width is auto?
View 14 Replies View RelatedI kinda accidentally disabled our internet network and I can't find a way to reconnect it with our adapter. I tried to troubleshoot it and also search for our device, and nothing seems to work.
View 8 Replies View RelatedWhen doing anything on my PC, gaming, browsing, whatever, I will have random disconnects for a few seconds and it will reconnect. I don't get the "your network cable has been unplugged" message, it just stops working for a second or two and starts working again. This has been happening for a few months after a fresh install of windows xp and I haven't really tried to fix it.Every other computer in the house is fine except this one, it can't be the modem because a new one was installed a few days ago and its the same problem. The router was reset within the last week as well. I think the problem is with this computer alone but I don't know where to look. The problem didn't happen for a few days after I put a new network card in, but soon after it continued happening. I also have tried a few different CAT5 cables, even the XBOX one but nothing resolved the issue.
View 4 Replies View RelatedHow to reconnect to Wi-Fi network automatically
View 1 Replies View RelatedIn my test lab I have a CISCO VPN3002 that I would like to connect automatically C1841 after a power down. Unfortunately , when I do the setup , it works and connect directly (3 GREEN LED's).But after a power down , when I look back in the config , I have :
GROUP = 3000client Password=xxxxxxxx Verify=xxxxxxxx
USER = cisco Password= Verify=
Both Password and Verify are empty ?
When I connect to the exchange server by using Cisco VPN, microsoft outlook display warning "microsoft try to reconnect ... " many times, at that time I cannot send or receive email, it failed. The VPN still connected so I don't know why? At first I think the problem from MTU so I decrease the MTU but the problem still happens.
View 3 Replies View RelatedI used to have ATT DSL but we recently switched to U-Verse. I have a Trendnet TEW-452BRP 54g wireless router than was handling the PPPoE function. It was set to work flawlessly with my wireless cards. No dropped connections, speed or security issues. It always connected quickly from wake up and on start up. Now we have a 2Wire i38HG wireless router/gateway and it's been difficult to properly set my network up as before. I use the Trendnet behind the 2Wire as my wireless router. Took me a while to figure out what to do, but DHCP is disabled on Trendnet so 2Wire does what it needs to. This option works fine for me. The only problem is that at first my wireless card would not automatically connect to the network through the Trendnet when it is in range like I had it set to do previously. When I would force it to, after 3 times it would magically connect on it's own. I made some changes in the Trendnet (Mainly disabling dynamic DNS and NAT) and that seems to have made a difference. To be honest, I don't know if that is significant or not or if it actually made a longterm difference but it seems like it has. So my problem is now that when I put my laptop to sleep and have it wake up, it does not automatically reconnect. It takes about 2 minutes then it does on its own. I read the event viewer and this is the info it gave me - Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 0x0018DE0682D8. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Level - Warning
OpCode - IpLeaseRenewalFailed
Source - Dhcp-Client
Then after 2 minutes -
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x0018DE0682D8. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Level - Error
OpCode - IpAddressNotAssigned
Source - Dhcp-Client
After this, it connects by itself. I don't believe I have configured the 2Wire or Trendnet properly, so I need some guidance and suggestions on this matter.
Laptop - Intel Core Duo 1.66ghz, 2gb Ram, Win7 Professional with SP1, Intel PRO Wireless 3945ABG
2Wire - 192.168.1.254
Trendnet - 192.168.1.1
- I did not change the IP of the Trendnet and I am not sure if I have to.
From the 2wire - Private Network
Router/Gateway Address192.168.1.254
Subnet Mask255.255.255.0
Private Network DHCP Info
Range192.168.1.64 � 192.168.1.253
[code]....
Cannot reconnect to the internet after reinstalling Windows XP SP2 on HP DC7100 SFF. Internet connection is via switch to modem to cable. Working fine previously, and other computer connected to switch still working fine?
View 7 Replies View RelatedI work for a small company and we just brought in a Juniper EX4200 switch so that we are able to test our SFP's and XFP's. I went through the EZSetup process however when I try to re-connect afterwards it just tells me that my subnet for the switch is different then the PC. I have tried assigning a static IP but that is not working for me either
View 8 Replies View RelatedI have a red x in "My Computer" at the network drive. cannot connect to it. what do you suggest. I am on a pere tp pere network
View 1 Replies View RelatedI accidently disconnected my wireless adapter, how do i reconnect.
View 1 Replies View RelatedMy sony blue ray player lost it's connection to my wireless lnyskis router. I can't reconnect it.
View 3 Replies View RelatedI have and D-Link modem which is bridged and a PPPoAPPPoE profile set up on the RV220W for my ADSL2+ connection.I cannot for the life of me find anywhere in the routers config web pages to tell the modem to disconnect or reconnect the connetion to the ISP.The reason I want this is because I need to make sure the correct signaling is sent before the connection is stopped so that the exchange doesnt see this as a drop out and reduce our line speed to compensate.
View 1 Replies View RelatedI have ASA5540 running IOS 8.04-K8, users are able to connect VPN over the internet but unable to re-connect VPN when users disconnected abnormally (abnormally means they are not disconnecting VPN manually, while disconnecting manually no problem occur). ASA showing an active session of the disconnected user and user having reason 433 while re-connecting VPN.
View 11 Replies View Relatedwent to uninstall the other two and then went to install our new one on the main computer.I have now lost connection with the wifi to this pc and only this one. (the internet still works on two laptops) unfortunately i need this computer for work and therefore need the internet quite urgently. Perhaps uninstalled something by accident and if so what is it and what can i download?
View 3 Replies View Relatedwin xp I work at a junior high school. A lot of the computers are part of a work group so they can share printers.
I'm having problems connecting to a printer. It has worked for a long time, it's still my default printer, but when I try to access it, it gives me a spooling error.
Now here's why I think it's a network problem.I can't access the main computer's network location (the one hooked up directly to the printer). All the other computers come up on the networkjust fine. And the one in question is only able to access very few computers in the network browser. let me simplify:
computer A/ brother printershared computer B/no longer sees A on network A/ sees only a small portion of other computers on network B/ sees all computers but A
Again, I don't think it's a spooler problem. It probably gives that error because it's a default printer with a lost connection.
windows was unable to connect dlink (router) is message i receive on my laptop after setting my son's nintendo 3ds to the wifi connection. internet connection is otherwise fine on other devices in home.
View 1 Replies View RelatedI purchased the Netgear a couple of years ago and it worked great. Since I've upgraded to a faster bandwith from Verizon, I can't get the Netgear to work. What am I not doing?
View 1 Replies View RelatedNetgear WGR614v7 Router.I have three computers wi-fi networked via the Netgear router: a laptop, a Mac Mini, and a XBox 360.About 30% of the time, when I wake my laptop up, it's been dropped from the network. The only thing that seems to allow it to connect again is if I unplug the power from the router and plug it back in again.This also happens to the XBox 360 once and a while. It never happens to the Mini. I suspect the Mini never gets dropped because it never gets turned off or goes to sleep.Some things I've tried to no avail:
- restarting my laptop
- manually reconnecting to the network via the icon in the system tray
- ipconfig /release, /renew
- disabling power management on my network adapter
- updating my router's firmware
My research keeps pointing to my router's "idle timeout" setting, though that may or may not actually be the problem. In my router setup, I currently have the "Does Your Internet Connection Require A Login?" setting set to No. When it's set to No, I do not have access to my Idle Timeout setting. If I set Login Required to Yes, I do have access to Idle Timeout, but none of my computers can connect, and I'm unsure how to get that working properly. I've read that if I set Idle Timeout to 0 (zero), it essentially never times out.
I will be setting up a new computer this weekend. I presently have a WRT54G2 wireless-G router and have configured it to an IP address that works with my AT&T(Bellsouth) broadband modem (Westell). When I reconnect it to my new computer, should I first just connect the ethernet cable to the modem as if I don't have a router (like I did for years) and then go into the instructions for setting up the router via the DVD but enter the IP address as I have it working now?
View 3 Replies View Relatedi have a wrt160Nv3 wireless router.
I had a wireless device connecting to my network - so I blocked it. Unfortunaletly turned out to be my daughters ipod touch. How can i reconnect it back. dont seem to be able to add device and linksys keeps blocking her connection attempts
ISP Virgin Media who ship DLINKS without any assistance for custom options, I seem to be having no end of trouble trying to get my DLINK615 and Xbox to play fair.In order to allow me to play my Xbox without any technical problems, or problems with other players I had to open up a few ports, been there resolved that. But, I only want to open them on one IP I want to always be assigned to the Xbox360. This IP being 192.168.0.100
I added that into the DHCP Reservation list, only to find that the Xbox failed to reconnect after being turned off and back on, I believe this is a problem with the DLINK Router, unless I am very badly mistaken.
I have a Belkin 690, model# F9K1002V4 that's been working great until I had to turn off and disconnect some things in order to replace my old tv stand. After I straightened out the mess of wires from everything and made sure all the connections were good all the other components including my satellite modem were working fine, but the wireless router won't reconnect. It's working fine with a cable but won't work wireless even though the blue indicator shows the actual router to be working okay. I've repeatedly reset/re-powered the router to no avail. Firmware is up to date.
View 1 Replies View RelatedEvery two or three days I'm unable to reconnect to my wifi network when I turn on my Windows 7 laptop or Android tablet. I have to power cycle the wifi router to get the connection again. This usually happens after I haven't used either device for a day or two. The connection usually does not drop when I'm using them. Restarting the computer or the tablet does not work and using the Windows troubleshooter (or the android app for wifi issues on the tablet) also doesn't work. Both computer and tablet recognize the network and say the signal is strong but won’t connect to it. There are no physical obstructions. I have no problem with my internet connection (cable modem). The problem really seems to be with the wifi router.
Model name: Linksys E1000
Model number: E1000
Firmware version: 2.1.02 build 5
Operating system: Windows 7 SP 1
Software version: 1.3.11069.2
Connection type (WAN): DHCP
I have a Linksys wireless WMP600n PCi adapter installed in my desktop PC and after recovering from standby, it does not automatically reconnect. I have to right-click on the Wireless Networks icon in the system tray then select "Repair". I would say it does this 9 times out of 10 (1 time in 10 I seem to luck out and it restores the connection automatically).
I have an Asus M4A88TD-M motherboard with 1 Gb of DDR3 RAM and I am running Windows XP Home Edition (SP3). There is only one PCi slot on this motherboard. Also, I am not using the wireless network software that shipped with the product but rather the native wireless networks application software that shipped with Windows XP. I have had this problem with the original driver that shipped with the product CD and the problem persists with the latest driver. I have not enabled Hibernation and there are no active power saving modes on the PC.I have reviewed all of the options in the Wireless 600n Properties/Advanced tab and have enabled the Continuously Awake Mode and disabled the Power Saving Mode but the problem persists.
I have two other PCs with the older Linksys wireless WMP300n PCi adapters and they do not exhibit this behaviour after recovering from standby - they reliably reconnect.