Linksys Wireless Router :: Best Way To Reconnect WRT54G2 With New Computer

Jan 13, 2012

I will be setting up a new computer this weekend.  I presently have a WRT54G2 wireless-G router and have configured it to an IP address that works with my AT&T(Bellsouth) broadband modem (Westell).  When I reconnect it to my new computer, should I first just connect the ethernet cable to the modem as if I don't have a router (like I did for years) and then go into the instructions for setting up the router via the DVD but enter the IP address as I have it working now? 

View 3 Replies


ADVERTISEMENT

Linksys Wireless Router :: WRT54G2 Doesn't Automatically Connect To Internet On Computer Start-up

Aug 12, 2012

My WRT54G2 v1 does not automatically connect to the internet on computer start-up. The computer will say "Connected, No Internet Access" In order to fix it I have to unplug the router and then plug it back in. This happens to any computer that tries to get online from a cold start-up. The router must always be unplugged, then plugged back in, then it will have internet access (and will generally maintain it throughout the session and even if the computer is restarted, i.e. warm boot). I have downloaded the latest firmware uprade.

View 9 Replies View Related

Linksys Wrt54g2 / New Wired Computer Causes Wireless To Stop Working?

May 31, 2012

I recently built a new computer and it runs a wired connection. I was having problems with dns dropping.until i set static ip and dns. But now whenever my computer is on my router doesn't broadcast a wireless signal and none of my devices can connect to wireless until I turn off my computer. The router is a linksys wrt54g2

View 4 Replies View Related

Wireless Connections / Every Time Restart Or Shutdown Computer Have To Reconnect?

Mar 16, 2012

I haven't really allowed this to bug me too much, but I went over by a friend's house, used his WiFi, closed my Laptop, it disconnected, I reconnected to his network, came back home, now every time I restart or Shutdown my computer I have to reconnect, not that big of a deal

View 5 Replies View Related

Linksys Wireless Router :: Wrt160Nv3 - How To Reconnect A Device

Aug 29, 2011

i have a wrt160Nv3 wireless router.
 
I had a wireless device connecting to my network - so I blocked it.  Unfortunaletly turned out to be my daughters ipod touch.  How can i reconnect it back.  dont seem to be able to add device and linksys keeps blocking her connection attempts

View 1 Replies View Related

Linksys Wireless Router :: E1000 - Can't Reconnect To Internet

Oct 19, 2012

Every two or three days I'm unable to reconnect to my wifi network when I turn on my Windows 7 laptop or Android tablet. I have to power cycle the wifi router to get the connection again. This usually happens after I haven't used either device for a day or two. The connection usually does not drop when I'm using them. Restarting the computer or the tablet does not work and using the Windows troubleshooter (or the android app for wifi issues on the tablet) also doesn't work. Both computer and tablet recognize the network and say the signal is strong but won’t connect to it. There are no physical obstructions. I have no problem with my internet connection (cable modem). The problem really seems to be with the wifi router.

Model name: Linksys E1000
Model number: E1000
Firmware version: 2.1.02 build 5
Operating system: Windows 7 SP 1
Software version: 1.3.11069.2
Connection type (WAN): DHCP

View 2 Replies View Related

Linksys Wireless Router :: E1000 Mac Doesn't Automatically Reconnect?

May 7, 2012

I recently got an E1000 router brand new V2.1 from a friend. Seems to run great, only problem both my Mac Book Pros (running snow leopard and lion) will not reconnect automatically to the wifi after waking up from sleep.

View 1 Replies View Related

Linksys Wireless Router :: WRT150N Disconnecting - Need To Remove Power To Reconnect

May 23, 2009

My Linksys WRT150N recently gave up on me and started to give me weird issues and started to disconnect (all the ports including wired & wireless) anywhere from 3 to infinite number of times per day and my only solution was to remove the power chord and connect it. I tried all possible ways possible including resetting the router, stopping SSID broadcast, removing the encryption, etc, but non worked. As the router was out of warranty my only option was to take it to the dealers where they told me it would take 3 weeks to fix and God knows how much they would have charged me. But after flashing the firmware with the dd-wrt it has been almost 24 hours without a single problem and now I have the cool option of seeing who is connected to the router, etc. This is a MUST for every Linksys owner.

1. Reset the router using 30-30-30 and waited for 2 minutes for things to come back 2 normal
2. Flashed the router with "dd-wrt.v24_mini_generic.bin"
3. Reset again using 30-30-30 and wait again4. Flashed the router with " dd-wrt.v24_std_generic.bin"5.

View 3 Replies View Related

How To Reconnect Internet To Computer

Oct 25, 2011

I have internet on my computer at home and i have unpluged the computer and moved in to another room it is saying that i need to reconnect the internet.

View 1 Replies View Related

Computer Disappears From School Network - Cannot Reconnect To Printer

Mar 10, 2013

win xp I work at a junior high school. A lot of the computers are part of a work group so they can share printers.

I'm having problems connecting to a printer. It has worked for a long time, it's still my default printer, but when I try to access it, it gives me a spooling error.

Now here's why I think it's a network problem.I can't access the main computer's network location (the one hooked up directly to the printer). All the other computers come up on the networkjust fine. And the one in question is only able to access very few computers in the network browser. let me simplify:

computer A/ brother printershared computer B/no longer sees A on network A/ sees only a small portion of other computers on network B/ sees all computers but A

Again, I don't think it's a spooler problem. It probably gives that error because it's a default printer with a lost connection.

View 10 Replies View Related

Wireless :: Can't Get Linksys WRT54G2 Router To Work

Oct 9, 2011

I have a Linksys WRT54G2 V1and I am trying to hook it up to my broadband modem after hooking up the connections it still does not recognize?

View 2 Replies View Related

Linksys Wireless Router :: Can't Get Online With WRT54G2

Mar 27, 2011

Yesterday my wireless internet suddenly stopped working. I plugged the ethernet cable directly from the modem to the computer and everything was fine, so I reset the router, reconnected it to the modem, and went to the setup page 192.168.1.1. I reconfigured the router on the setup page, leaving all previous settings the same (except I renamed the network from linksys to our own name and reconfirmed the WPA Personal password). My computer can connect to the wireless network but I can't go online.

View 9 Replies View Related

Linksys Wireless Router :: WRT54G2 V1 - Can't Access 192.168.1.1?

Jan 18, 2013

Really not grab Router Gateway, even as did the 30-30-30 reset because I had all the lights on, and is still in trouble. I am currently connected via ethernet to the router only. And yet not grab us Links Home door. The lights now are Power, WIFI and Port 4.

View 2 Replies View Related

Linksys Wireless Router :: WRT54G2 V1 - How To Set Up Internet On TV

Jul 4, 2011

I have this router back in my home office for my wife's Mac laptop. I recently purchased a new Sony TV with internet access capability and was hoping to gain access through my router, however during set-up attempt it will not connect. My wife is able to use her laptop in the same area as the TV.

View 3 Replies View Related

Linksys Wireless Router :: WRT54G2 - Connection After ISP Down

Nov 28, 2011

I have a WRT54G2 v1 (no new firmware available) with a cable-modem connection (Motorola Surfboard),  every thing works perfect but when my ISP goes down and then back up I cannot get the router work,  LAN or Wifi connection.  I have ping response to the router and I'm also able to get into the admin page.   The only way to recover is restarting the router and sometimes releasing DHCP and then Renewing it,  and the Wan connection actually gets the same IP it had before.

View 3 Replies View Related

Linksys Wireless Router :: How To Connect Wrt54g2 V1

Nov 4, 2012

I'm not really computer savy and I have an old wireless G Broadband router model # WRT54G2 V1 .

View 1 Replies View Related

Linksys Wireless Router :: Cannot Connect To WRT54G2

Oct 5, 2011

Went away on vacation for a couple of weeks and when I got back my Linksys WRT54G2 has lost it's configuration.  It's showing a WiFi signal, but is no longer password protected.
 
I've tried connecting with a desktop on the same network, to 192.168.1.11, but that address is not connecting.  I tried to reach it with my iPad wirelessly, and it's giving me the login screen, but not allowing me to login.  I tried to use the reset button on the back to reset it to the factory default, but then I should be able to login with no username and the password of "admin", correct?  But that's not getting me in either.
 
I'd like to get this network password protected again and not offer a signal to all of my neighbors.

View 2 Replies View Related

Linksys Wireless Router :: Connecting PC To WRT54G2 V1

Oct 4, 2008

I've tried to connect my father's laptop and my father's girlfriend's daughter's PC to my Linksys Wireless Router, model #WRT54G2 V1. So far, I have steady and fast internet access on my PC which so far I've only gotten my father's laptop to connect through. However, I can't figure out how to get her PC to get internet access through my router. I'm mediocre at configuring computers, and I'm absolutely terrible at routers. :/ There was the possibility that her computer isn't new or advanced enough or whatever to be compatible with a wireless router, but at the same time she has a Wireless Network Setup Wizard app. in the control panel area, so wouldn't I be correct in assuming that if a computer has a wizard dedicated to it, it is compatible? I've run Wireless Network Setup Wizard as well as just plain Network Setup Wizard, and I've had them both read that it was successful connecting to my Router's network...but where do I go from there? I've never had to mess with a PC before so I'm not entirely sure. She has a modem, which can not be plugged into the phone jack at the same time as my modem otherwise we both do not have internet access, however if one of us plugs in that person is fine, so that's when I figured I'd try to get her PC into my network with my dad's laptop. Also, we have a Broadband connection setup through Verizon, if that matters at all. Does she need a modem to hook up to my network at all? If so, does that modem need to be plugged into the phone jack? If required I'll give her OS and PC specs and such, but from what I know just being on her computer she runs Windows XP as an OS and her computer is an "eMachine".

View 9 Replies View Related

Linksys Wireless Router :: Lost It On WRT54G2

Aug 12, 2010

I have been having trouble with my wireless router for the past month and not sure what is up with it. I have recently moved and got it working for a day then the wireless did not work and i was not able to access the setup webpage either. What I ended up doing was upgrade the firmware to the newest one and it worked well for about 2 weeks but then started again and the only way it works is to reboot the router but then the next day it will not work.

View 3 Replies View Related

Linksys Wireless Router :: WRT54G2 Can't Get IP From PPPoE Server

Sep 19, 2010

I installed a Linksys WRT54G2 router earlier this year and set my Siemens modem from AT&T(Actually from SBC before the two merged) in bridge mode.  I did this so I could change the NAT setting on our internet, which was interfering with my Xbox.  It worked for about 4 or 5 months with little to no problems.  Recently, however, the internet has been disconnecting and when I check the status page on the router it says it is disconnected.  Sometimes clicking on the connect button will work, but usually it will say "Connecting" and keep refreshing the page for a little while without any change, then give me a message saying it couldn't get the IP from the PPPoe server.  Turning it and the Siemens modem on and off and fiddling around seems to solve the problem, but only temporarily.  Interestingly enough, I don't think it ever interferes with my Xbox.  Until recently, the Xbox was set as the highest priority on the QoS page, but I changed the computer to the highest priority and it hasn't worked.  In addition, the small, thin green light bar just below the Linksys logo on the top of the router has just recently started changing to orange occasionally

View 9 Replies View Related

Linksys Wireless Router :: Password Protect WRT54G2

Sep 23, 2011

I am trying to password protect my router  but when I go into wireless> security mode and click on WPA or any of the other choices it goes back to disabled.

View 3 Replies View Related

Linksys Wireless Router :: Can't Select 802.11n Anymore On Wrt54g2

Jan 4, 2012

A couple of days ago I noticed my download speed (from my own webserver) has slowed down. I checked my wireless connection and saw that the radiotype was now 802.11g instead of 802.11n, what is always has been. I looked at the Wireless configuration in the router's webbased config panel, but the only things listed there are "Disabled", "Mixed", "Wireless-G Only" and "Wireless-B Only". A scratched my head a bit, wondering wether or not I really bought an N router or just a G router. But IIRC I really bought an N router. It said so on the bill. Also, when I check the user manual, page 14 says I should be able to select "Wireless-N Only".

View 5 Replies View Related

Linksys Wireless Router :: Way To Install New WRT54G2 Firmware

Sep 16, 2008

I just bought this router yesterday. Can someone link me the most up to date firmware, and explain how to install it?

View 9 Replies View Related

Linksys Wireless Router :: How To Remove DD-WRT Firmware On WRT54G2 V1

Mar 25, 2009

I Installed the DD-WRT firmware on my linksys WRT54G2 v1 router....ibut now the connection keeps on dropping...not stable, how do I roll back to the original linksys firmware?

View 9 Replies View Related

Linksys Wireless Router :: WRT54G2 Dying After 2 Hours?

Sep 13, 2011

I've needed to power-cycle my router every 2 hours. Usually it can last 2 weeks before needing to power-cycle (a process I've done for the past 2 or 3 years). This actually happened before for me a couple of months ago, but I did a firmware update along with a reset, and it looked like everything went back to normal.
 
But last Saturday I had to power-cycle it twice, then it didn't have any problems all day Sunday. But yesterday it went back to needing to be power-cycle it every 2 hours. My computer is physically connected to the router and is working perfectly no problems at all. But my parents use the wireless for their PC and laptop, and I use it for my 360, PS3, and Wii, so having to power-cycle it every 2 hours would be a pain.
 
I was wondering if this is a sign of the wireless in my router dying and in need of a new one, or is there some possible fixes I can do in order to repair it.
 
Mixed Mode
Wireless Channel 1
No WPA (Something I'm planning on fixing)

View 3 Replies View Related

Linksys Wireless Router :: WRT54G2 Ver 1.5 Unstable Ping?

Dec 29, 2011

I recently found that whilst using my WIRED connections, web pages have been opening slower at times. My ping times to google.com usually is around 72-84 ms which I continue to get if I hook up the cable modem directly to the PC. As soon as I utilize the Linksys router, I start getting higher ping times anywhere from 72-300 ms. Firmware version is 1.5.01 which I recently upgraded to. I tried resetting and so on. Is there an older firmware version that works better? I'm currently running Windows 7 Ultimate 64-bit.

View 1 Replies View Related

Linksys Wireless Router :: Can't Connect To Internet Using WRT54G2 V1

Jul 8, 2011

When I connect the ethernet directly to my mac the internet works fine, but when I try to connect through my Linksys WRT54G2 V1 Wireless-G Broadband Router I can't connect to the internet. Omitting a few minor problems, my router has been working fine for the past year and a half. Recently it started giving me trouble so i have started trying a number of things to fix it, but I'm no expert in this category. The other day i tried updating the firmware which actually worked for a couple of hours, but then stopped working again.

View 3 Replies View Related

Linksys Wireless Router :: Can't Connect To Wifi With Wrt54g2 V1

Mar 11, 2012

I have a Linksys WRT54G2 V1 and since I bought my new notebook with Windows 7 I can not access the wifi. I have another notebooks with Windows Vista and a PC with Windows XP that connect perfectly, but with Windows 7 gives me error when loading the password.I Update the firmware to version 1.0.04 (this the latest version I found on the cisco site), but still don't work.I Try chatting with Cisco support and was told he was no longer under warranty.

View 6 Replies View Related

Linksys Wireless Router :: WRT54G2 - No LAN And Simultaneous Blinking

Dec 7, 2012

I have Linksys WRT54G2 V1 it suddenly died yesterday. I does not broadcast any wifi, I tried connecting via cable but there is no LAN, "Network Cable Unplugged". I also tried to do 30 sec reset even the 30/30/30 reset but no success. The front lights and power supply are blinking exept the Wifi and Power indicators.

View 1 Replies View Related

Linksys Wireless Router :: Use DHCP Reservation With WRT54G2?

Jul 24, 2008

How can I use the dhcp reservation with this router? I've network printer and i can't use it.

View 6 Replies View Related

Linksys Wireless Router :: WRT54G2 Reset Is Not Working?

Jan 30, 2011

I can't seem to login to my admin. the IP for me is 192.168.0.1 and I can't login. I tried resetting the router a few times and no luck.Is there ANY other way to reset the username and password?

View 6 Replies View Related

Linksys Wireless Router :: Finding Security Key For WRT54G2?

Jul 7, 2011

I recently upgraded the OS on my laptop to Windows 7, which wiped out most of my older Vista settings.  When I try to connect to my home network, I am prompted for a security key (network key?).  How do I find the security key?  I can't find any of the paperwork that came with my router.
 
By the way, I am currently using my desktop, running under Windows XP.

View 2 Replies View Related

Linksys Wireless Router :: WRT54G2 V1 - Running Two Networks

Dec 24, 2011

I've gone through a couple modems, only possible reason I can think this is happening, but I don't know for sure if it could be a factor. Anyway, it seems my router is running two... networks? I've reset my router, set up my wireless network, configure the SSID name, password lock it, but there still appears to be a "Linksys" network running with no password. I'm afraid it's being used by someone else, seeing as it's free wifi. I've reset my router a couple times and set up my wifi and this linksys still appears to be running. The reason why I feel it's mine is because one night our net went out and when my brother attempted to log onto the linksys, its net wasn't working either. When our net came back up, the linksys was running with working net once more. It seems like too much coincidence to not be true. I'm really not sure what is causing this and I've never experienced this before.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved