Linksys Wireless Router :: Use DHCP Reservation With WRT54G2?
Jul 24, 2008How can I use the dhcp reservation with this router? I've network printer and i can't use it.
View 6 Replies
ADVERTISEMENT
Linksys Wireless Router :: E4200 - DHCP Reservation Not Showing Anything
Jun 9, 2011When I'm in Setup -> Basic Setup -> click on DHCP Reservation, I don't see all entries I've created earlier but computers that connect still have the correct IP address on the network; I don't know if I can create additional entries if nothing appears
When I go to Status -> Local Network -> DHCP Client Table the list is blank but some computers are connected to the networkI'm using firmware 1.0.01 build 10 Feb 21, 2011, language = English, Firefox 4.0.1.Rebooting the router doesn't change anything, I can't see connected LAN equipment and DHCP Reservation is empty despite the fact I've created entries.Together with the "Access Restriction" which doesn't allow to block a computer from 10pm => 8am unless you create 2 rules + various issues with attached USB + 2.4Ghz signal that is far from optimal (never able to achieve more than 144-N-Mbps) and I ask myself if I will not contact the store where I purchased this unit and ask a refund (and buy something else from another brand...)
Linksys Wireless Router :: E2500v2 DHCP Reservation Table Bug
May 12, 2013I tried to enter a name that included an illegal character (in this case, a single quote), and it gave me the popup box that said I had done so. When the popup closed, my DHCP reservation table was emptied out (I had maybe 5-6 reserved clients). In fact, I can't add new reservations anymore at all from this screen as it lists nothing in the DHCP clients table at the top. (Note, there are plenty of things in the DHCP Clients table over on the Status->Local Network tab). At this point, I think that my pre-existing reservations are still being held, but I'm not sure as it's only been about an hour so nothing has renewed.
I had firmware 1.0.05 when I encountered this problem. I upgraded to 1.0.07 as a means of trying to kick it into action, but the problem still exists.
Linksys Wireless Router :: E3200 - DHCP Reservation Table Is Incomplete?
Sep 24, 2011my researvation table is incomplete. Below I show ipconfig that shows wired & wireless NICs assigned ip addresses by the E3200 router but the DHCP table only shows one.
I need to reserve the ip address of the wired address but can't get at it.
Linksys Wireless Router :: E3000 Recognize NAS Enclosure In DHCP Reservation?
Jan 19, 2013I have Linksys E3000 Router and it is connected to 7 Devices at this moment via DHCP. I have got New NAS Enclousre (8th Device) which has got Lan port . I have connected Box to One free Port on E3000 Router. I see DHCP Reservation from 192.168.0.1 assging one IP to My NAS Enclosure Box i.e 192.168.0.13 But when i ping that box . It's not pingable. When i try to browse that NAS Enclosure's setup web page - it's not opening. I can access that box setup page if i connect direct 1:1 Lan cable over private network (169.254.XXX). It means web server is runing on box. I am clueless. E3000 is assigning IP to NAS Enclosure but can't Browse or Ping. I tried to Assign Manual IP address to NAS enclusure and reconnect to router. Still I can't ping or browse.
#arp -a show that box has IP. (Output from MAC os) .
? (192.168.0.13) at (incomplete) on en0 ifscope [ethernet]
Ping test from Router Page.
PING 192.162.0.13 (192.162.0.13): 32 data bytes
40 bytes from 192.162.0.13: icmp_seq=0 ttl=46 time=286.6 ms
40 bytes from 192.162.0.13: icmp_seq=1 ttl=46 time=290.2 ms
[code]....
Linksys Wireless Router :: EA2700 / Connect Cloud And DHCP Reservation
Jul 3, 2012Before upgrading my firmware on my EA2700, I can easily reserve IP address for my wired device. With the new cloud interface, I click to select the device from the top pane to bring it down in the reserved IP pane below. When I try to save the IP change I get two errors: 1) Invalid characters in the device name 2) Invalid IP address. I get the same errors even if I do not edid not edit the name or IP address.
As for the device name, I did not change anything or rename the device. One device has a " - " in the name and the router was happy with it until I tried to reserve the IP. Another one had a " ' " in the name, same problem again.
My network DHCP range is set to 192.168.1.200 to 192.168.1.250 and I use the range from 192.168.1.1 to 192.168.100 for static IP. When I tried to reserve a static IP below 192.168.1.200, the router say that is an invalid IP.
The workaround to this problem has been to temporary set the DHCP range to 192.168.1.1 to 192.168.1.50 and set the static IP in that range and rename the devices to a name that the EA2700 will accept. Next I move the DHCP range from 192.168.1.50 to 192.168.1.100 and repeat the process. After, all the static IP are assigned, then I can reset the DHCP range to 192.168.1.200 to 192.168.1.250.
This is a pain to do. In the previous (cloud less) version, this was a breeze to do. Also, I have not figured out how to redirect ports with the new interface. Is that progress?
Linksys Wireless Router :: Wrt400n Doesn't Show Dhcp Reservation For Security
Jul 27, 2011i am having an annoying issue with my wrt400n and my foscam FI8918W. in the dhcp reservation tab, the wrt400n doesn't show the foscam anywhere in the tab. it shows all laptops, cell phones, nases, etc. if i use the cisco connect software it does show it in the network map. i can probably add it manually via the gui. is this something normal or security cams not considered devices?
View 1 Replies View RelatedLinksys Wireless Router :: E4200v2 DHCP - Make Manual Reservation Of IP Address Range?
Mar 26, 2013E4200v2, firmware 2.1.39.145204
Router says "Invalid IP address" when I try to make a manual IP address reservation of the IP address range.
Example: local network 192.168.1.0/24, where .1 is a router, .2 is a reservation, .20-.50 is a range for DHCP.
Before upgrade I didn't have this problem.
Linksys Wireless Router :: E4200 Getting DHCP Reservation To Work Properly With Windows 7 Machine
Jun 7, 2011I have the e4200 and I am having trouble getting DHCP reservation to work properly with my Windows 7 machines. Perhaps there is a step that I am missing. Basically I go to the DHCP reservation setup page, select my machine and add it to the reservation table. Then I save the changes. As soon as I do this my computer goes offline. If I reboot my machine, it is still offline. I've tried the same procedure to reserve the IP address for my phone and it works fine so I wonder if the problem is with Win7.
View 6 Replies View RelatedLinksys Cable / DSL :: WAG120N Dhcp Reservation / Attached Devices?
Jul 9, 2010I've just got a WAG120N router and can't see anyway to see what devices are attached to the router or be able to assign static IP's
View 3 Replies View RelatedCisco :: DHCP Reservation On 877 Router?
Jun 27, 2012why my switch is not picking up a reserved address from the second pool below?console output with dhcp debugging on.ps. I have also tried 'hardware-address 0024.f769.bf40 1' which is hardware type 'other'
Config
ip dhcp excluded-address 172.23.23.1 172.23.23.49
!
ip dhcp pool main
import all
network 172.23.23.0 255.255.255.0
[code].....
Obtain DHCP Reservation From The 1st Router?
Oct 6, 2012I have simple set-up in my network with 2 routers connected to each other, 2nd router is just kind of wireless access point and switch to extend cable sockets upstairs.I have DHCP reservation on the first router and it works perfectly. Second router has DHCP server disabled, and I have configured DHCP reservation same as the first router, but it gives random IP addressess instead of reserved. how can I configure second router to obtain MAC DHCP RESERVATION TABLE from the 1st router?
View 7 Replies View RelatedDHCP Reservation Can't Set A Static IP
Feb 7, 2012I have a Blackberry Playbook and have come into a problem with it.I can't set a Static IP on it so would setting a DHCP Reservation in my Linksys E2500 router act as a static IP?
View 2 Replies View RelatedDHCP Reservation Not Working
Apr 2, 2011I'm using TP Link router. I went to DHCP reservation list and provided mac address of a computer and ip address to reserve the ip address for the computer. But it still not changing my current ip address. I rebooted router, rebotted computer, but it still not changing to the reserved ip.
View 3 Replies View RelatedLinksys Wireless Router :: EA4500 - Assign A DNS Address For A DHP Reservation?
Dec 21, 2012On my EA4500 i've given my Sony Google TV Box (connected by wifi N) a static ip address under "DHCP Reservations". However is there any way to add a DNS server address to this reserved IP so that only the Google Box is affected by the DNS, all the other connected devices remain unaffected? Presently i enter the required DNS address in the google box but i would prefer to do it on the EA4500. I'm using the latest Cisco Cloud fw on my router.
View 3 Replies View RelatedD-Link DIR-825 :: Sometimes Shows A DHCP Reservation List
Mar 5, 2012Ever since I updated my firmware to 1.01 my web interface for the network settings screen has been random. Somtimes it shows a DHCP reservation list, sometimes it doesn't. Sometimes there are reservations, sometimes there are selectable radio buttons. I guess I'm just trying to figure out if this is a firmware issue or not. Ever since I updated the firmware it has been flakey.... But I was having issues with other stuff before that. When there are no reservations, sometimes i can't even select any computers because there aren't any in the drop down, when all of my hardware is online?
View 6 Replies View RelatedCisco Firewall :: ASA 5510 8.2 DHCP With Reservation?
Apr 19, 2012Is it possible to set up DHCP server with reservations for specific IPs?
View 1 Replies View RelatedCisco Routers :: ISA570W / DHCP Reservation For Multiple Clients At Once?
Jun 4, 2013All the SOHO routers I have used had a table which shows IP, MAC, Name, etc. In this table, I could easily put a check mark to a check box in a row that I would like to bind/reserve and IP would be reserved for that specific MAC.
In ISA570W, when I need to reserve/bind an IP to a MAC it asks me to fill out a table in which I have to manually type in the name, IP, and MAC.
Is there an easier way?Is there a way to do the reservation for multiple clients at once?If this is the only way, do I need to copy the mac address of each client somewhere and then reserve IPs for each one manually? This method looks very far from user friendly and efficient, unless there is a very logical reason that I cannot think of.
Wireless :: Can't Get Linksys WRT54G2 Router To Work
Oct 9, 2011I have a Linksys WRT54G2 V1and I am trying to hook it up to my broadband modem after hooking up the connections it still does not recognize?
View 2 Replies View RelatedLinksys Wireless Router :: Can't Get Online With WRT54G2
Mar 27, 2011Yesterday my wireless internet suddenly stopped working. I plugged the ethernet cable directly from the modem to the computer and everything was fine, so I reset the router, reconnected it to the modem, and went to the setup page 192.168.1.1. I reconfigured the router on the setup page, leaving all previous settings the same (except I renamed the network from linksys to our own name and reconfirmed the WPA Personal password). My computer can connect to the wireless network but I can't go online.
View 9 Replies View RelatedLinksys Wireless Router :: WRT54G2 V1 - Can't Access 192.168.1.1?
Jan 18, 2013Really not grab Router Gateway, even as did the 30-30-30 reset because I had all the lights on, and is still in trouble. I am currently connected via ethernet to the router only. And yet not grab us Links Home door. The lights now are Power, WIFI and Port 4.
View 2 Replies View RelatedLinksys Wireless Router :: WRT54G2 V1 - How To Set Up Internet On TV
Jul 4, 2011I have this router back in my home office for my wife's Mac laptop. I recently purchased a new Sony TV with internet access capability and was hoping to gain access through my router, however during set-up attempt it will not connect. My wife is able to use her laptop in the same area as the TV.
View 3 Replies View RelatedLinksys Wireless Router :: WRT54G2 - Connection After ISP Down
Nov 28, 2011I have a WRT54G2 v1 (no new firmware available) with a cable-modem connection (Motorola Surfboard), every thing works perfect but when my ISP goes down and then back up I cannot get the router work, LAN or Wifi connection. I have ping response to the router and I'm also able to get into the admin page. The only way to recover is restarting the router and sometimes releasing DHCP and then Renewing it, and the Wan connection actually gets the same IP it had before.
View 3 Replies View RelatedLinksys Wireless Router :: How To Connect Wrt54g2 V1
Nov 4, 2012I'm not really computer savy and I have an old wireless G Broadband router model # WRT54G2 V1 .
View 1 Replies View RelatedLinksys Wireless Router :: Cannot Connect To WRT54G2
Oct 5, 2011Went away on vacation for a couple of weeks and when I got back my Linksys WRT54G2 has lost it's configuration. It's showing a WiFi signal, but is no longer password protected.
I've tried connecting with a desktop on the same network, to 192.168.1.11, but that address is not connecting. I tried to reach it with my iPad wirelessly, and it's giving me the login screen, but not allowing me to login. I tried to use the reset button on the back to reset it to the factory default, but then I should be able to login with no username and the password of "admin", correct? But that's not getting me in either.
I'd like to get this network password protected again and not offer a signal to all of my neighbors.
Linksys Wireless Router :: Connecting PC To WRT54G2 V1
Oct 4, 2008I've tried to connect my father's laptop and my father's girlfriend's daughter's PC to my Linksys Wireless Router, model #WRT54G2 V1. So far, I have steady and fast internet access on my PC which so far I've only gotten my father's laptop to connect through. However, I can't figure out how to get her PC to get internet access through my router. I'm mediocre at configuring computers, and I'm absolutely terrible at routers. :/ There was the possibility that her computer isn't new or advanced enough or whatever to be compatible with a wireless router, but at the same time she has a Wireless Network Setup Wizard app. in the control panel area, so wouldn't I be correct in assuming that if a computer has a wizard dedicated to it, it is compatible? I've run Wireless Network Setup Wizard as well as just plain Network Setup Wizard, and I've had them both read that it was successful connecting to my Router's network...but where do I go from there? I've never had to mess with a PC before so I'm not entirely sure. She has a modem, which can not be plugged into the phone jack at the same time as my modem otherwise we both do not have internet access, however if one of us plugs in that person is fine, so that's when I figured I'd try to get her PC into my network with my dad's laptop. Also, we have a Broadband connection setup through Verizon, if that matters at all. Does she need a modem to hook up to my network at all? If so, does that modem need to be plugged into the phone jack? If required I'll give her OS and PC specs and such, but from what I know just being on her computer she runs Windows XP as an OS and her computer is an "eMachine".
View 9 Replies View RelatedLinksys Wireless Router :: Lost It On WRT54G2
Aug 12, 2010I have been having trouble with my wireless router for the past month and not sure what is up with it. I have recently moved and got it working for a day then the wireless did not work and i was not able to access the setup webpage either. What I ended up doing was upgrade the firmware to the newest one and it worked well for about 2 weeks but then started again and the only way it works is to reboot the router but then the next day it will not work.
View 3 Replies View RelatedLinksys Wireless Router :: WRT54G2 Can't Get IP From PPPoE Server
Sep 19, 2010I installed a Linksys WRT54G2 router earlier this year and set my Siemens modem from AT&T(Actually from SBC before the two merged) in bridge mode. I did this so I could change the NAT setting on our internet, which was interfering with my Xbox. It worked for about 4 or 5 months with little to no problems. Recently, however, the internet has been disconnecting and when I check the status page on the router it says it is disconnected. Sometimes clicking on the connect button will work, but usually it will say "Connecting" and keep refreshing the page for a little while without any change, then give me a message saying it couldn't get the IP from the PPPoe server. Turning it and the Siemens modem on and off and fiddling around seems to solve the problem, but only temporarily. Interestingly enough, I don't think it ever interferes with my Xbox. Until recently, the Xbox was set as the highest priority on the QoS page, but I changed the computer to the highest priority and it hasn't worked. In addition, the small, thin green light bar just below the Linksys logo on the top of the router has just recently started changing to orange occasionally
View 9 Replies View RelatedLinksys Wireless Router :: Password Protect WRT54G2
Sep 23, 2011I am trying to password protect my router but when I go into wireless> security mode and click on WPA or any of the other choices it goes back to disabled.
View 3 Replies View RelatedLinksys Wireless Router :: Can't Select 802.11n Anymore On Wrt54g2
Jan 4, 2012A couple of days ago I noticed my download speed (from my own webserver) has slowed down. I checked my wireless connection and saw that the radiotype was now 802.11g instead of 802.11n, what is always has been. I looked at the Wireless configuration in the router's webbased config panel, but the only things listed there are "Disabled", "Mixed", "Wireless-G Only" and "Wireless-B Only". A scratched my head a bit, wondering wether or not I really bought an N router or just a G router. But IIRC I really bought an N router. It said so on the bill. Also, when I check the user manual, page 14 says I should be able to select "Wireless-N Only".
View 5 Replies View RelatedLinksys Wireless Router :: Way To Install New WRT54G2 Firmware
Sep 16, 2008I just bought this router yesterday. Can someone link me the most up to date firmware, and explain how to install it?
View 9 Replies View RelatedLinksys Wireless Router :: How To Remove DD-WRT Firmware On WRT54G2 V1
Mar 25, 2009I Installed the DD-WRT firmware on my linksys WRT54G2 v1 router....ibut now the connection keeps on dropping...not stable, how do I roll back to the original linksys firmware?
View 9 Replies View RelatedLinksys Wireless Router :: WRT54G2 Dying After 2 Hours?
Sep 13, 2011I've needed to power-cycle my router every 2 hours. Usually it can last 2 weeks before needing to power-cycle (a process I've done for the past 2 or 3 years). This actually happened before for me a couple of months ago, but I did a firmware update along with a reset, and it looked like everything went back to normal.
But last Saturday I had to power-cycle it twice, then it didn't have any problems all day Sunday. But yesterday it went back to needing to be power-cycle it every 2 hours. My computer is physically connected to the router and is working perfectly no problems at all. But my parents use the wireless for their PC and laptop, and I use it for my 360, PS3, and Wii, so having to power-cycle it every 2 hours would be a pain.
I was wondering if this is a sign of the wireless in my router dying and in need of a new one, or is there some possible fixes I can do in order to repair it.
Mixed Mode
Wireless Channel 1
No WPA (Something I'm planning on fixing)