I haven't really allowed this to bug me too much, but I went over by a friend's house, used his WiFi, closed my Laptop, it disconnected, I reconnected to his network, came back home, now every time I restart or Shutdown my computer I have to reconnect, not that big of a deal
View 5 RepliesHad laptop connecting wirelessly perfect with no problems. We then added another laptop and PSP 3 to the house hold. Any of the 3 devices will connect to the internet via wireless but ONLY one at a time. If you are connected with one and turn on one of the others it will kick the one off that you were on and only 1 device can use wireless at a time?
View 4 Replies View RelatedI am in a third world country (Thailand) with ADSL service and getting customer support is difficult to say the least.The connection is constantly dropping but the real problem lies in that i can not reconnect unless i restart my computer.
View 8 Replies View RelatedSo I just got hooked up to the internet via qwest the other day with my room mate. We have a wireless modem (PK5000) and he's using the AE2500 usb adapter to get online. Now, he can get online, but if he ever turns off or sleeps his computer, he can't connect when he turns it back on. His computer can see the network, full signal, but when he tries to connect it says cannot connect and under troubleshoot options suggests we should move his computer closer to the modem, but its only about 20 feet away and shows full signal. To get it to work, we need to go into the modem config and reset the wireless options. No changes are made, just scroll to the bottom and click apply, and presto change he can connect with no problems.He's running windows 7 home edition 64 bit. The modem's security is WPA/WPA2.
View 1 Replies View RelatedI will be setting up a new computer this weekend. I presently have a WRT54G2 wireless-G router and have configured it to an IP address that works with my AT&T(Bellsouth) broadband modem (Westell). When I reconnect it to my new computer, should I first just connect the ethernet cable to the modem as if I don't have a router (like I did for years) and then go into the instructions for setting up the router via the DVD but enter the IP address as I have it working now?
View 3 Replies View RelatedI have (2) WLC-4404's with one in standby. I noticed this controller has been up for 300+ days and i was just wondering if it will be useful to reboot these once in a while? Any benefits or should i just leave them running?
View 4 Replies View RelatedI can copy or past small files but on big files like DVD ISO which are about 5GB there is a sudden shutdown like a power out.This shutdown happens exactly when I click paste. It is not the temperature or virus or a bad xp install.I clean installed xp and installed the newest lan drivers from ECS.
View 6 Replies View RelatedI just bought a WRT120N and at different times it will randomly restart and disconnect all the computer on my network I have 4 wired devices and 4 Wireless devices.
View 9 Replies View RelatedI have internet on my computer at home and i have unpluged the computer and moved in to another room it is saying that i need to reconnect the internet.
View 1 Replies View Relatedwin xp I work at a junior high school. A lot of the computers are part of a work group so they can share printers.
I'm having problems connecting to a printer. It has worked for a long time, it's still my default printer, but when I try to access it, it gives me a spooling error.
Now here's why I think it's a network problem.I can't access the main computer's network location (the one hooked up directly to the printer). All the other computers come up on the networkjust fine. And the one in question is only able to access very few computers in the network browser. let me simplify:
computer A/ brother printershared computer B/no longer sees A on network A/ sees only a small portion of other computers on network B/ sees all computers but A
Again, I don't think it's a spooler problem. It probably gives that error because it's a default printer with a lost connection.
is it possible to shutdown a specific port on my 3750x and monitor this port at the same time .for example , im dealing with a mac authenticated network using port security , i want to shut down all the ports that are not used at the moment , however , if some one gets connected to the one of the shutdown ports i want to know the mac address of the user or atleast to know that i have someone who is just plugged in to the one of the shutdowned ports .
View 4 Replies View RelatedSometimes they load after restarting computer but if you close browser and try open it again they wont load most of the time.Steam has also stopped working and freezes at part where its trying to connect to account. Also "internet" symbol and bottom left corner says two different things at same time:
Network Internet Connection
Network No Internet Connection
Problem has gotten worse by day. First one restart would fix problem but now steam won't work and if you get pages to load after closing browser you need to restart computer couple of times before pages are loading again.
I have Vista Home premium 32 bit. My connection from the internet has been a frustrating problem. I have to turn my computer off and on several times before my wireless works. It I do a restart on my computer my internet does not work, so I have to totally shut it down and wait then restart and even then it my not work. I always run the repair to repair wireless connection and even that does not work.
View 3 Replies View RelatedMy kid is heading off to college with a Toshiba Satellite E-205 laptop and a Kodak ESP Office 2150 printer. She would like to use the wireless printer option on the Kodak, which requires a wireless router. I have a D-Link DIR-655 wireless router that I can send with her.
I know her university has a very robust wireless system for Internet access, so she is going to want to use their wireless access.
So, the DIR-655 sole use will be to allow access to the printer. It will not be accessing the Internet or be cabled into the university's network.
Is it possible to operate TWO wireless connections at the same time so she can hit her university wireless and the DIR-655 so she can print wirelessly?
how do I configure the laptop and the DIR-655 to allow this kind of access?
I've been having this issue where my wireless network completely disappears from my computer and it requires a restart to fix.I know for a fact that it is not my modem/ISP as my iPad still connects just fine to the network.My network disappears about after 10-20 minutes of being logged on.
View 1 Replies View RelatedI have two wireless connections at home from 2 different ISPs. How can make my laptop connect to both routers at the same time to make use of them?
View 1 Replies View RelatedMy mother's computer periodically loses internet connectivity. This happens regardless of the browser (IE or Firefox). She must restart her computer to get access again. This happens regardless of her internet connection. She uses verizon at her home and accesses through my wireless router when visiting. This also happens if she is on a public access network such as a hospital
View 1 Replies View RelatedRegion : Canada
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Bell
I'm having to reboot what is now my 2nd router every 1-2 days in order for all connections to resume working. My 2nd router was working great since Saturday afternoon, and just now I needed to reboot in order for my laptop to connect to the network.Now that it seems pretty clear the router in general isn't faulty, I suspected that the issue was IP lease related, so I was looking at DHCP settings and changed the lease time to 2880 (max setting), from 120 (default). However, this should only prolong how often i'll need to reboot the router. So, what is it that's causing my devices to disconnect or not being able to connect to the router for a prolonged period of time?
my computer cant find any wireless connections
View 1 Replies View RelatedI set up my Linksys wireless router BEFW11S4 with a password protection to prevent access from unauthorized users, now I can only access my internet connection from one computer at a time not simultaneously like before I introduced the password. I must have missed to turn on a switch somewhere in the set up
View 2 Replies View RelatedUpon turning on the computer, the wireless will not connect. It seems to not recognize the configuration of the wireless. I have to go in and put in the key every time... and then there are times that it says "limited or no connectivity". We just had a new router/modem installed in our network just yesterday. This router/modem is in conjunction with cable tv difficulties we were having.
View 3 Replies View RelatedI'd like to use 2 internet connections at the same time.Assuming there are two internet networks.Network A and Network B (both are either wireless OR one is wireless and one is wired OR both are wireless). So, now I want to use BOTH internet connections simultaneously. However, both connections will still be separate and not combined:If I had to transfer big files, then I could do this on network A.Now, I want to use network B for other "normal" internet use so that the transfer of files in network A gets the maximum speed since there is no interference with anything else.I have to let the computer know somehow that there are two connections used simultaneously. I also have to setup what programs use what connection. E.g., IE uses network a and Firefox uses network b, program "x" also uses network b, etc.I would use two network card/USB Wifi Adapers so that each network card/wifi adapter can connect to one network.how do you realize that without setting a Virtual Machine up?
View 9 Replies View RelatedSo yesterday i was sitting at my computer, doing nothing and then the internet shuts off. So i go up stairs to check on the router, and all of the normal lights are on, as well as the modem. Neither the host or wireless computer has internet.I'm able to be on the forums because i hooked my modem up to this computer, without the router.Whenever i set the router back up, it has the normal connectivity lights on, but the wireless computer AND host computet dont get connection. How to get my wireless computer back up through this router, without canceling ALL connection.[CODE]
View 14 Replies View RelatedI hav two different internet connections by different service providers,one is LAN and other is WIRELESS.whn i turn off the WI-FI button n put the lan connection thn it shows connected but pages dnt open and a reload message comes and thn i unplug LAN n turn on the WI-FI conctn thn i m able to connect and surf.so, i m only able to use the wireless one..
View 2 Replies View RelatedI have laptop with windows 7 ultimate.i have two internet connection avalable...
1> wifi network of my office...which is protected by cyberom..so i cant open facebook and other restricted sites
2> internet through my android mobile...which is dialup connection or through usb tethering
i want to use office wifi for downloading via idm or other download manager and my mobile internet for social networking..or any idea i allow application to connect internet via perticuler network/way..
Suddenly my Dell Inspiron 8600 has stopped seeing any wireless connections in the range. I run XP Home SP3
View 1 Replies View RelatedHow many VPN connections the ASA5540 can provide at the same time?
View 2 Replies View RelatedAny input on this: We had a DMZ server that customers used to get to their information. This sever was the front end to get to the host that holds the customer information. The server was in a DMZ, the path from Server to host was: through DMZ switch, through firewall to 6509 switch to the host. We never had a problem with this, the server application was old but worked great.
We have since moved to having someone host the front end. The front end connects via Internet to their third party router, to the same DMZ switch through same firewall, to same 6509 to host. The third party router is configured with VPN tunnel to remote end. Connection comes through Internet to their router and is Na Ted then goes to DMZ, to host.
Internet---E1 (Router NAT) E0 ---ASA---6509---Host
We have had nothing but trouble with this connection. Customers are complaining because the connections time out so much. We see a lot of tcp resets on the host to the Router NAT ip address (which is the DMZ side interface). The resets usually show "Invalid Query Header Length". The current connection is capped at 1Mbps, with average response times of 50ms (spikes to 200).
They keep telling us that something is wrong with the host, but I have to believe the latency is causing us problems. I can see that bandwidth seems to be enough as I do not see the interfaces utilizing that much, averages about 300K. I was wondering could the IOS NAT be contributing to the problem as well?
I have a Cisco WRT120N Router and a Cisco Valet AM10 wireless adapter. Almost every time the computer reboots, I loose my network and I have to redo the AM10 setup. The AM10 is the only device that loses the connection, my lap top and printer do not lose the connection.
Problem 2: Everytime I upplug and replug the AM10 a window pops up saying I need to check the drive for errors but none
are found.
Problem 3: I downloaded the AM10 install program, Downloadable.Setup.AM10.1.2.10148.2. It does not work. If I try to run it Iget an error message that the setup canot be completed and to call in for support.
Problem 4: When I can get it working is shows that it is Wireless Connection 5. Why 5 and not 1? Where are the other 4?
<script id="overlay_tmpl" type="text/html">// <div id="<%= overlayId %>" class="_mp3rocket_overlay_style" style="left: <%= overlayLeft %>; top: <%= overlayTop %>; width: <%= overlayWidth %>; height: <%= overlayHeight %>"></div> // </script>
How to connect two or more internet connections at same time to increase internet speed ?
View 1 Replies View RelatedI have a Netgear N150 Wireless ADSL2+ Modem Router(DGN1000) which i need to connect for wireless access..My internet connection is a wireless one(antenna connected on roof) connection available to only one computer with an RJ45 LAN.Is it possible for me to connect the router to this LAN cable and get internet on more than one computer at a time?? I have the following information
IP :
Subnet :
Default Gateway :
Primary DNS :
Secondary DNS :
MAC of the Registered Computer :
I have Cisco 871 router with 12.3. OS version.
1. I'm interested if it's possible to block certain contetn only at certain time ? e.g. We would like to block facebook from 7:00 to 10:00 and from 11:00 to 15:00. I was going through cisco manuals but can't find the right answer to this.
2. Cisco 871 has 4 LAN interfaces and one WAN interface. Currently WAN interface is connected to adsl modem in bridge mode and LAN 0 interface is connected to switch.
I'm interested if I could use remaining 3 LAN interfaces for adsl connections same as I'm using WAN interface. Then I would create vlans that would use LAN interface 0. Each of those VLAN's would use different adsl connection.I would assign different IP to each VLAN's so users would be able to change their gateway and use different ADSL connection.
I have A WAN and DSL for Internet connection in my work place and both are using differnet Network address which means both have their own routers and i have connected both on the same cisco switch.And my Question is how can i use both connection on one computer with out changing every time the ip address of the computer.
View 1 Replies View Related