My mother's computer periodically loses internet connectivity. This happens regardless of the browser (IE or Firefox). She must restart her computer to get access again. This happens regardless of her internet connection. She uses verizon at her home and accesses through my wireless router when visiting. This also happens if she is on a public access network such as a hospital
View 1 RepliesI have Vista Home premium 32 bit. My connection from the internet has been a frustrating problem. I have to turn my computer off and on several times before my wireless works. It I do a restart on my computer my internet does not work, so I have to totally shut it down and wait then restart and even then it my not work. I always run the repair to repair wireless connection and even that does not work.
View 3 Replies View RelatedInternet connection was lost after a recent program download that some had flagged with suspcious nature. A static IP address had been established through a Netgear (WNDR3300) router with an antiquated Netopia modem. Static address/Defaut gateway has always began as: 192.168..... After connection loss, reset (or so I think) IPv4 properties back to: Obtain IP address automatically and have received an IP address as: 169.254.172.83. Also have not been able to access router or modem settings/configurations page(s).
View 1 Replies View RelatedMy daughters Studio 17 laptop lost all internet connectivity. Wired and Wireless. I have been searching all kinds of threads but don't seem to find a solution to this issue. I have done two systems recoveries to earlier dates when we know it was working to no avail. I have 3 other computers on this network and none are experiencing any issues. I did just change from DSL to cable broadband, but the computer was fine until Monday night. Not sure what is going on. Does a system recovery will undo Windows updates? The most recent updates took place on 1/4/2012, which is about the time the problem showed up. I am going to uninstall those updates, 2 Security Update for Windows, and see what happens. Stand by. No good. It didn't work. I see a lot of people who are having the same problem here recently so something must have changed.
Windows 7
Dell Studio 17 Model PP33L
Microsoft Security Essentials
Windows Firewall
Looking for a SOHO device that could accomplish not only to connect people from home to Internet, but also to let me remotely access my work stuff (from my home office), RV180W sounded great and really cost effective. I could connect to Internet, FROM Internet, separate home, work and guest VLANs, all in just one device... sounded just GREAT! Bought one but (unfortunately) I have to say I'm quite disappointed with its performance, outnumbered errors (how many!) and continuous lost of Internet connectivity (can't stay a full day without one).I've searched a lot (not only here) and tried many things, listing some:
- Upgrading firmware (now v1.0.2.6): done several times, once with nothing connected to the router besides a local wired laptop, to ensure integrity
- Resetting to factory defaults and performing a "clean configuration", from scratch (done several times)
- Disabling Firewall functions (once all of them)
- Checking the real need of every option and making sure I had just the ones I needed configured
I have (in a very "consistent" way) the following problems:
- Poor performance (it's clearly much better when I directly connect to the cable modem's WiFi OR to another router connected to this cable modem). I could say that it seems to have 50% of the performance I had with my CISCO/Linksys E4200 and Netgear "elder" routers.
- Persistent disconnections / resets: Sometimes it happens only with wireless, sometimes it looses the "Internet forwarding capability", retaining the local wireless connection (to other devices), sometimes it seems to make a full reboot (including a new DHCP request to cable modem). In a day this happens several times, I'd say from 3 to 15 times, depending on the day (couldn't figure out why).
CPU utilization is always shown as being 100%, what sounds amazing, because:
- There are usually just 4 wired connections (3 storage devices + 1 Desktop) and at most 5 wireless connections (including my laptop connected to the main VLAN and 3 Android devices and 1 "guest" laptop connected to GUEST VLAN)
- The utilization % remains when I have jut one laptop performing Internet browsing and nothing more
- VPN wasn't enabled yet (and it will be, as I want to remotely connect to my home office) [code] ......
The computer lost internet connections. Other computers in the house are fine with wireless and the direct connection.This computer I am working on is the one directly connected (not wireless).I tried the connection on other computers and it works.When troubleshooting, it indicates it lost the drivers so we downloaded the correct drivers and installed them on the computer. It indicates it has the updated drivers now. Funny thing is when you start of the computer the error message on the screen is Installation or Upgrade Error A problem occurred during the upgrade process.you must restart your computer. After it restarts, the Webroot upgrade resumes.I am concerned as my daughters computer has the same error message but her Internet connection still works.Seemed to me that Webroot could be a potential problem. Since we can't download the latest version (no internet and can't use disc we have as it tells us it is outdated) I tried to uninstall using WMPinfo.xml to finish the uninstall.I got an error that indicated - "The InstallAware Wizard for Webroot Software has failed: "WRConsumerService stop failed with error 2 and kill failed with error 128". If you continue to have trouble, please click the link below for assistance. And the link is titled Uninstall but without internet it is worthless. It uninstalled the Webroot SecureAnywhere file but it doesn't remove the Webroot Software. [code]
View 14 Replies View Relatedi have problem with internet notconnected router
View 1 Replies View RelatedI have recently purchased a RVS4000 router and am experiencing major downtime.Almost everyday the RVS4000 router losing internet connectivity. I noticed that when this happens I cannot login into the router from my pc which is connected to the RVS4000 network.The only way to restore connectivity is to restart the RVS4000 by disconnecting power and powering back up.The router's WAN is connected to my Cable modem.The RVS400 has two PC connected to it. (port 3 & 4) I have a Cisco 8-port switch connect to the RVS4000 with 3 additional PCs/devices on it.
View 6 Replies View RelatedSometimes they load after restarting computer but if you close browser and try open it again they wont load most of the time.Steam has also stopped working and freezes at part where its trying to connect to account. Also "internet" symbol and bottom left corner says two different things at same time:
Network Internet Connection
Network No Internet Connection
Problem has gotten worse by day. First one restart would fix problem but now steam won't work and if you get pages to load after closing browser you need to restart computer couple of times before pages are loading again.
I've been having this issue where my wireless network completely disappears from my computer and it requires a restart to fix.I know for a fact that it is not my modem/ISP as my iPad still connects just fine to the network.My network disappears about after 10-20 minutes of being logged on.
View 1 Replies View RelatedI haven't really allowed this to bug me too much, but I went over by a friend's house, used his WiFi, closed my Laptop, it disconnected, I reconnected to his network, came back home, now every time I restart or Shutdown my computer I have to reconnect, not that big of a deal
View 5 Replies View RelatedI recently upgraded to a new computer, it runs beautifully as expected however I encounter this problem with gaming. Whenever I hop in a game such as Dead Island, Arma 2 : CO (Day Z), Stalker : CoP, even Skyrim ( with SKSE, standard it ran okay. ) my connection will drop for my entire local network. I can still connect to my router, and it shows that I disconnect and reconnect with a new IP, from the logs it seems to be unprovoked. A few games will operate normally, however with Stalker, I play completely offline, and my connection still drops. It's not an instant disconnect, and it generally varies in time. However, when I'm not gaming, I get a steady connection with no issues, I get advertised speeds and can stream videos, and download perfectly fine. I've tried a USB wireless adapter to cross my motherboard off the list, and it encountered the same issue. But this problem just started occurring when I got the new computer.
View 9 Replies View RelatedI just bought a WRT120N and at different times it will randomly restart and disconnect all the computer on my network I have 4 wired devices and 4 Wireless devices.
View 9 Replies View RelatedA week ago this laptop was working fine. However, now it will not connect via wireless to the internet. It says that it connects to the router but not the internet. I can connect to the internet if I use the wired LAN connection. I tried a restore to two weeks ago (when it was working) and it did not solve the problem. I do see in the wireless network connection status that IPv4 connectivity = local and IPv6 connectivity = local. While on another laptop (that is working and connects to the same wireless router) the IPv4 = internet and IPv6 = no network access. I think this may be the issue, but am unable to find out how to change them.
OS = MS Vista Home SP2.
Lost internet access through server after change router LAN ip.I did every thing still dont have access to internet .and also read this post:
http:[url]....
I have a router and a server that are connected through two unmanage switches. The router has DSL service in it, and i can ping the router from server3 client through cable and 2 client through WLAN.
We've had no problems with our Internet before but yesterday I could only get local access connection. Neither my iPhone, laptop or home computer cud get any further than local connection on wireless.I'v tried the classic turnin it off and on (the router) and I'v tried connection with a cable but still gettin the same connection level! The router is a netgear if that means anything!
View 1 Replies View RelatedA few days ago my desktop (which is hardlined into a router) lost all connectivity. My wireless connections work fine and i have began basic troubleshooting; changing ethernet cables, taking router out of the mix, etc. Beginning to think the ethernet port on pc is going out (NIC card?). Funny thing is, it will come back intermitantly for 10 minute increments. power cycling does nothing.
View 8 Replies View RelatedI have a L2L IPSEC tunnel between a set of failover pair of two ASA5510's and a single ASA5505. Over time they will loose connectivity through the tunnel. The tunnel itself stays up, but cannot pass any traffic.When looking at the tunnel I always see this on the set of 5510's (marked in bold @ IPSEC ID 3)?
View 5 Replies View RelatedI cannot connect to the internet. After running troubleshooting i receive and error message."Local area connection 2" doesn't have a valid ip configuration.
[code]...
After reset to factory settings of my Acer 6930 I have lost my internet access.Tried wi-fi and ethernet but neither find my router.
View 6 Replies View RelatedIn my 3750 stack switch there are more than 10 L3 vlans currently in use.In that only one vlan for example vlan 11 (we given up link directly to the nodes connected to that ports which is in vlan 11)losing connectivity for sometime and again connectivity restored.Except Vlan 11 all other vlans are working fine. When we troubleshooted the issue some of the ip's able to ping and some not able to ping. checked the interface status of that ports (no crc and input errors) and port is in up status only.we also checked cpu utlilisation ,device uptime, all are no issues found. am sharing my sw basic config and one interface status at the time of issue.But only one port learning more than 50 Mac-Addresses dynamically.and am learning mac address violation in another port which is port security and storm control enabled on that port..Its seems to be any attack or something else????
interface GigabitEthernet1/0/20
--More-- description
switchport access vlan 11
switchport mode access
spanning-tree portfast
logs:
Mar 8 05:58:25.848 IST: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 0026.0a18.8218 on port GigabitEthernet1/0/16.
Mar 8 05:59:25.862 IST: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 0026.0a18.8218 on port GigabitEthernet1/0/16.
AT the time of issue interface status:
sh int gi2/0/14
GigabitEthernet2/0/14 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is 0026.ca46.5c8e (bia 0026.ca46.5c8e)
Description:
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,[code]......
I am working on my Mom's computer so I will need to download any files to a flashdrive to transfer. Her Compaq CQ5110Y Vista 32/bit pk 1 has lost it's network. I also just discovered a Trojan Horse Dropper in the BSTQBackA file. Did I mention I know nothing about this tech stuff? Norton states some files cannot be healed?
View 3 Replies View RelatedRegion : Sweden
Model : TL-MR3420
Hardware Version : V1
Firmware Version : TL-MR3420_V1_121123
ISP : Tre
I have owned the TL-MR3420 for about six months and never had any problems with it, 3G connection stable enough and wifi and LAN worked properly without any drops.About one week ago I started experiencing problems. Both wifi and LAN gets disabled and I need to pull the plug and do a hard reset to correct the issue. This only happens after some heavy use, many devices is connected to Wifi, streaming files over the WIfi and so on. A scenario may be the following; there are six devices back home using all using wifi. All of them are not connected at the same time, but four may be; usually three computers and one tablet. The HTPC may do some heavy videostreaming from another computer. When the streaming is over, some devices are shut down then I may lose the WIFI and LAN ability of the router.
I have tried connecting with cable after wifi were lost but no IP address where given to it and connection where refused. This means I have no possibility to access the log file in the router, and after reboot the log file is reset. Router settings is pretty much default.Is my device broken or is there any setting I may tweak with?I have updated to latest firmware and tried to change channel without success.
My E3000 has been running for months without a hitch. Last night, it lost connectivity on the 2.4 GHz. I can connect on my laptop (Dell, XP) on the wireless 5 Ghz only. Wired connections (2 PCs and one video device) connect fine. All wireless equipment (laptops and LG DVD device needing 2.4 GHz) see the 2.4 GHz with good signal but will not connect. Of course, I rechecked name and passwords.
I tried the MSR restart and reboot several times, including turning things off overnight. Checked to be sure settings were not corrupted in setup.E3000 running firmware 1.0.04.
Bought a month or 2 ago, configured and installed as our public access point. Worked well except for locking up weekly. A few weeks back, I lost all connectivity with it. It will get power, but no wireless and no Ethernet lights on the front. I attempted to reset it with no luck. Firmware is V01.
View 1 Replies View RelatedMicrosoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersAlex>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Alex-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
Over the past few days I've been having a problem with my internet connection.
I connect to my home wifi network and will have excellent signal strength, but after about 20 minutes or so, I will lose internet access, but will stay connected to my wifi network. If I join my neighbor's wifi network I will have the same issue.I will connect to a network, and while still connected, I will suddenly lose internet access (signal strength will remain the same). Switching networks doesn't correct the problem.
When I lose internet, I can disconnect from the network and reconnect mere seconds later and will have the internet access back again.I have reset the modem/router and my computer numerous times but the problem does not go away.
RV220W worked good with QuickVPN, but suddenly lost such ability and doesn't allow connection from any Windows machine (Xp,Win7 32/64 bit)
QuickVPN is ver. 1.4.2.1
Cisco RV220W firmware is ver. 1.0.4.17
Client error on Windows XP in Log.txt :
[STATUS]OS Version: Windows XP
[STATUS]Windows Firewall is OFF
[STATUS]One network interface detected with IP address 10.1.1.165
[STATUS]Connecting...
[DEBUG]Input VPN Server Address = x.x.x.x
[code]...
wireless network connection connected but limited or no connectivity
View 1 Replies View RelatedI have a new Linksys E3000, 2 wired disktops (1 windows 7, 1 windows vista), 2 wireless laptops (both windows Vista), whenever the computers power down into sleep mode and are woke up, I have lost my connections to the router and I am forced to restart the computer. I've been told by one person that this is a problem with vista and windows 7, but wouldn't that have been a problem with my old router also?
View 9 Replies View RelatedI recently set up a wrt54g router that I got used from a friend. I pressed the 'reset' button on the back, configured it for my computer according to the instructions on the website, and everything worked fine for a couple of days. Then I lost connectivity, tried powercycling my modem, but had to reset and reconfigure the router again. Worked fine again for a couple of days, then the problem repeated itself, so I reset and reconfigured again.
View 1 Replies View RelatedNoticed this AM that a new firmware was releaesed to my EA6500!! Very surprised to find it Monday AM. I went ahead & updated my firmware but lost connectivity to my Comcast cable modem. I was leaving for work so I had to pull the router & revert back to my original Linksys router.zBig storm heading my way, figured the wifw ywould need internet to track Hurricane Sandy. Any others have a new firmware waiting for install this AM? Keeping my fingers corossed on this firmware upgrade. I'm hoping it solves the device map issue.
View 2 Replies View RelatedI am currently in Thailand and I have been using dozens of different wifi connections around Australia and South-east Asia without a problem for the last year. I moved into a new place yesterday and when I tried to connect, it has the little yellow triangle with an exclamation mark, over the wireless symbol on the taskbar. I tried the troubleshooter but it says turn the modem off an on, I don't think I can do this, I'll try and ask reception but I doubt they will let me.
No-one else at this place I am staying has had the same problem as me. The signal strength is "excellent", the wifi password is correct. I have windows 7 on a Dell Inspiron.
I am at my old place now, where the internet works. I downloaded the internet test thing from one of the stickies, I'll go and do that at my new place and post the results soon.