We've had no problems with our Internet before but yesterday I could only get local access connection. Neither my iPhone, laptop or home computer cud get any further than local connection on wireless.I'v tried the classic turnin it off and on (the router) and I'v tried connection with a cable but still gettin the same connection level! The router is a netgear if that means anything!
View 1 RepliesAfter a brand new Router/Modem combo., there is NO local/wired connection with XP, although other PCs has a good connection with strong signal.
Is it because a spectific folder needed for wired/local connection got lost, .... or Networking card inside got defective?
I usually acess internet on Wi-Fi, and now I have travelled, and got my laptop with me. The internet here is Local Are Connection, the one with the cable, and it says I am connected, 100 Mbps, but no internet access! I can't browse or open anything that has to do with the internet... However, It works perfectly fine on EVERY other laptop. I've searched a lot of places and I've been told to write commands like ipconfig/ all andd netsh int ip reset.log but when I do that I get "The following command was not found : int ip reset.log" I set the properties in TCP/IP to Automatically detect settings .. but nothing.
View 14 Replies View RelatedI have some issue with internet connection and Router WRT54G. There is always "Local Connection" but no internet access. I checked that at two different laptops. One with Windows Vista and the other one with Windows XP. Both the same problem. There is a wireless connection with excellent signal strength but no internet access. I added a screen shut to see the Router setting. If more needed I will add more.
View 6 Replies View RelatedWhen I try to connect to the internet I get IE cannot dislay the webpage. All connections show that they are working fine. I did the repair option for my LAN, it states that it is working & shows that it's connected.I tried to sign into MSN & got no connection. I ran the repair option & got a DNS & Keyports warnings.I am running Windows XP on my home computer
View 2 Replies View RelatedMy computer is part of domain.I have one LAN connection. IP address 172.100.40.70 ,subnet Mask 255.255.255.0, Default Gate Way 172.100.40.1Another is one internet connection through bluetooth PAN IP address 192.168.0.103, subnet Mask 255.255.255.0, Default Gate Way 192.168.0.1.Problem is when I connect to LAN, internet connection is lost. If I take out LAN cable or disable LAN, I get the internet connection. I want to keep both LAN connection and bluetooth PAN internet connection.I must keep LAN IP address without changing.
View 6 Replies View RelatedI was trying to browse the internet earlier, and I randomly just lost my internet connection. My homepage loaded up just fine, but then I tried to go to another site. It was taking a while to load. After about a minute a page finally came up that said "Server not found" (I use firefox). I can't get on any websites now and I can't get internet on any of my wireless devices either. When I right clicked my network icon on the toolbar and clicked on diagnose and repair it said "There may be a problem with the DNS. Windows attempted to find the well known host www.microsoft.com using dns. The server responded that the name was unknown." I have Windows Vista. Now I have no idea what I could have done. I didn't do anything out of the normal, just tried to go to a website that I frequently visit with no problems and this happened. This is what I get when I type ipconfig/all in cmd prompt. [code]
View 14 Replies View RelatedI dont have an internet connection through my computer. This one tells me error 106. I have 3 computers hooked through the same router. So, I know I have internet, as I am writing this now. But for some reason, that computer is now telling me I lost the internet connection. I have tried unplugging everything, restarting the computer, and nothing has worked. I dont know how to get the internet back on that computer.
View 2 Replies View RelatedWhenever I restart or boot my computer, it loses internet connection (Local Area Connection Unplugged). I need to unplug the cable connecting my pc to the modem and replug it until the green and orange light comes on on the area where I plug the cble to the pc w/c means that there is already internet connectionSystem:Win XP sp3 OSGigabyte S-series motherboard ma74gm-s2Amd Athlon X3 processorMotorola SURFboard SB5101U/SB5101N Cable modem
View 8 Replies View RelatedMy brother is visiting me, and i am trying to connect his computer to my router (wireless), i got connected but access says local Only.When connected by wire i get internet access ( Access: local and Internet)His computer had several adwares/spywares and numerous toolbars...... that i uninstalled. Cleaned by Malwarebytes and AVG 2012 free edition.Scan results are clean now.
ISP: RCN (cable 25mbps)
Router: Cisco Linksys E1000.
Cable Modem: Motorolla surband
I have 2 other computers connected through wifi on this router without any problem. Vonage Phone is connected to this router. Xbox is connected wireless and LG Blu-ray player is connected (wired).Xirrus Wi-Fi inspector screenshot is attached, IPCONFIG /all was run wile wireless was on ( of course Local only) but cable was not connected.
Windows IP Configuration
Host Name . . . . . . . . . . . . : PK-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
Implement the procedures required so that machine 1 and machine 2 can communicate statically with one another. Outline the TCP/IP settings to be used on each of the machines and set this machine up accordingly.
I followed this guide [TUT] Setting a static internal IP (Windows and Linux)but what has happened is that now the two machines can't connect to the internet.
I have just turned my PC on to find that i have lost connection to the internet through my desktop PC. I am using the wired connection to my router, and i also have my xbox connected to the router which is working ok too. My laptop also works when connecting to the router both wired and wirelesly.
My network adaptor on my desktop is a Nvidia nForce, i have tried updating the driver on this to no avail. Next i tried to ping the router but i get PING Transmit faild, error code 1231. I ran IPCONFIG /all and found that i had no default gateway set, and also it was saying that the ethernet adaptor was : Media Unoperational, but since i rebooted both the pc and router the media unoperational tag has gone.
On the network and sharing page it shows i am connected to an unidenfied network but there is a cross through the internet. It also says the access and Connection for the unitentified network are Local only.
I no longer have internet access from my home network ONLY on my desktop computer. Everything was working fine as always - then while I was in my Network and Sharing Center, and clicked on my ethernet connection, 'Local Area Connection 3', I accidentally disabled it. No big deal I thought, so I re-enabled the connection. Except for some reason, my connection is all screwed up now. The name of this connection was and always has been 'dkm2' and now it just says 'Network', with no internet access. I have unplugged the cord and plugged it into this laptop and it immediately recognizes 'dkm2' and connects flawlessly, so I know the problem is on the desktop computer's end, and not the cable or router. I have tried reinstalling the ethernet adapter, as well as reinstalling/updating all drivers for it.The network diagnostic tool turns up with a message that says the connection between either my ethernet adapter or router and the Internet is broken. No matter what I seem to try, I can't get my connection to go back to it's normal 'dkm2' connection and stop giving me a generic, disconnected 'Network'. I can't figure out what could have changed. All that happened was the disabling and enabling of Local Area Connection 3.
View 9 Replies View RelatedImplement the procedures required so that machine 1 and machine 2 can communicate statically with one another. Outline the TCP/IP settings to be used on each of the machines and set this machine up accordingly. I followed this guide http:[URL]....tid=210 but what has happened is that now the two machines can't connect to the internet. How can I fix this?
Here is a links to the ipconfig/ all on the XP virtual machine http:[URL]....the default gate way here is the same as on my actual working machine.
At power on and off on my laptop, the wireless internet connection is lost on windows 7.
View 1 Replies View Relatedthe modem is open.the router also is open but dont have internet access.
View 1 Replies View RelatedI have lost my wireless connection on my acer notebook... where is the button/switch etc to give me the blue flashing light to demonstrate connection to my wireless internet?
View 3 Replies View RelatedI have PC System Windows XP home edition Version 2002 SP3 and I lost Internet access in the middle of downloading a new program. I have a Motorola modem and modem is connected to the Netgear router. When I turn my desktop PC on which is connected to the router it shows the local connection is connected, but the Bridge Network cable is unplugged I have no idea what that is and if I need it to be connected to the internet. I called the Comcast service and the lady assistant did not even know what the Bridge cable is and I do not know ether since. I do not know what I should do to get the connection back to the PC; another PC work just fine also is connected to the router.
View 1 Replies View RelatedYesterday we had a very brief power outage and until then everything worked fine. Small business that runs modem - router - switch. Since the power outage I can only get internet if I run straight into the modem. As soon as I run from the modem to any (tried 3 different ones) router I lose internet. I get a wireless signal on my router. I've reset the router to default settings. I've plugged in another router to the modem to check and I don't get anything from that router either (which was not plugged in during the power outage).
View 1 Replies View RelatedA week ago this laptop was working fine. However, now it will not connect via wireless to the internet. It says that it connects to the router but not the internet. I can connect to the internet if I use the wired LAN connection. I tried a restore to two weeks ago (when it was working) and it did not solve the problem. I do see in the wireless network connection status that IPv4 connectivity = local and IPv6 connectivity = local. While on another laptop (that is working and connects to the same wireless router) the IPv4 = internet and IPv6 = no network access. I think this may be the issue, but am unable to find out how to change them.
OS = MS Vista Home SP2.
I have an HP EliteBook 6930p with windows 7 installed and everything was working fine until i did a recent windows upgrade (might just be a coincidence) and i suddenly lost internet connection. My laptop picks up the router, shows full strength but i cannot connect to the internet wireless or Ethernet cable. I restored to a previous date and it worked fine, and all my other devices work fine (iPad, iPhone, other laptops). The trouble is when i connected to the internet again it up dated windows and i cant restore back to the original date anymore as it has gone from the list.
View 5 Replies View RelatedWe lost internet connection and found out that our router's light is off. Is it possible that something is wrong with the adaptor?
View 1 Replies View Relatedmy compaq presario CQ50 suddenly will not connect to internet.my router is a linksys WRT54G.
View 2 Replies View RelatedI am running Windows 7 - 64 bit on my laptop. I currently have Avast Internet Security installed and I have tried to uninstall the Avast software as I wish to change my antivirus software. I have tried uninstalling in safe mode using the Avast Clear utility. Unfortunately after using this utility the Avast program still remains on my hard drive in Program Files which I then have to delete manually. After doing so and restarting my computer I have no internet connection and the only way I can restore my internet connection is by copying the Avast program back into my Program Files.
View 3 Replies View RelatedI have lost my wireless internet connection it has been working perfectly, I phoned Sky and they say I will have to speak to dell to see where my internet has gone. I have a Studio 1745 Laptop. Is there a manual disable button on my laptop that I may have disabled by mistake.
View 1 Replies View RelatedI changed a configuration and suddenly I lost the internet connectivity... Result of the command: "show running-config"
: Saved:ASA Version 8.2(1) !hostname ciscoasaenable password qVQaNBP31RadYDLM encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 !interface Vlan2 nameif ATT security-level 0 pppoe client vpdn group ATT ip address pppoe setroute !interface Ethernet0/0 switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!ftp mode passiveclock timezone EST -5clock summer-time EDT recurringsame-security-traffic permit inter-interfaceobject-group service DM_INLINE_TCP_1 tcp port-object eq ftp port-object eq ftp-data port-object eq wwwaccess-list ATT_access_in remark Linkstation Accessaccess-list ATT_access_in extended permit tcp any host 99.23.119.78 object-group DM_INLINE_TCP_1 access-list ATT_access_in remark Linkstation
[code]....
I have a DELL inspiron N5110 laptop. I have 2 laptops at home including this one. However the Dell suddenly stopped connecting to our Sky broadband when it was previously connecting normally. The other devices including Iphones are fine! It says there is normal broadband connection, but then no internet connection! how to get back internet connection!
View 1 Replies View RelatedI have a Cisco ASA 5520 that we was working properly. I tried to create a VPN IPSEC to test but when I finished the wizard I lost the conection between the inside interface and outside. I use other interface for DMZ and other for printers network but this adapters are working properly. I have reviewed the NAT's and the ACL's but I don't see the problem?
I have delete the VPN IPSEC but it's still not working and I have the network down
Abruptly internet access disappeared. It's a router issue, none of the computers here can connect. Further, I can't access the router through a browser - 192.168.0.1 results in a "Firefox cannot connect" message. I've tried resetting the DNS to no avail. I'm typing via cell phone and it's annoying, but I'm willing to try about anything.
View 4 Replies View RelatedI have several devices connected to a homehub at my home.These include smart phones, desktop computer xbox 360 and a laptop.All work fine except the laptop which until the other day (when I uninstalled Norton Security off it) has been unable to connect to the internet.The laptop has Windows Vista SP 2. I searched the forums already for any details of how to rectify this and have seen mentioned the commands netsh int ip reset reset.log (along with Ipv4 and ipv6) and netsh winsock reset catalog? went to add/remove programmes to get rid of Norton and have sinced tried to use the Norton removal tool which every time I copy it across to the laptop from my desktop when I try to run it it says it is corrupt.I was then referred to a uninstall tool called Revo which I used to remove any symantec or Norton it could find.I have also turned off windows firewall and Im still not finding a resolution.
ipconfig/all shows the following information
C:Windowssystem32>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Lizzie-Laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
Lost internet access through server after change router LAN ip.I did every thing still dont have access to internet .and also read this post:
http:[url]....
I have a router and a server that are connected through two unmanage switches. The router has DSL service in it, and i can ping the router from server3 client through cable and 2 client through WLAN.
I have a dual wan router with a main cable modem for high speed and a backup adsl modem hooked just in case. The problem is that quite often it seems that my ISP loose his connection to the internet but communication is not lost between my ISP and my modem and router. Because of this, my router doesn´t do the automatic changeover from my WAN 1 to my WAN 2 hooked slower ADSL modem. My router has the ping to keep alive option checked on the WAN 1 setings using my Cable ISP provided IP address.How can I force my router to notice that my cable ISP lost his connection to the internet and do right away the changeover from his WAN 1 to his WAN 2 input?
View 1 Replies View RelatedI have a wire ADSL connection and I use ADSL WiFi enabled router for distribute my internet connection with in my other devices (on my home network). When I downloading large files (more than 30MB) over the internet using my WiFi connection, my connection drop several times. However if I exchange large files within my WiFi network (with in home network via WiFi), my WiFi connection not drop (I can exchange 6GB files without any issue). Why is that? Is it my router issue or my ADSL connection issue? Most of the time after I lost internet connection, i can see my WiFi connectivity standby, it's not disconnect. However some time it completely disconnect. After I lost the connection (standby or completely disconnected) it again automatically connect.
I face this issue if i download large files on the internet, via the WiFi, if i download large files on internet using Ethernet cable, my connection not drop, it's stable. I use default wireless settings on my router? I use open WiFi connection.