Linksys Wireless Router :: E3000 Lost Connectivity On 2.4 GHz
Aug 15, 2011
My E3000 has been running for months without a hitch. Last night, it lost connectivity on the 2.4 GHz. I can connect on my laptop (Dell, XP) on the wireless 5 Ghz only. Wired connections (2 PCs and one video device) connect fine. All wireless equipment (laptops and LG DVD device needing 2.4 GHz) see the 2.4 GHz with good signal but will not connect. Of course, I rechecked name and passwords.
I tried the MSR restart and reboot several times, including turning things off overnight. Checked to be sure settings were not corrupted in setup.E3000 running firmware 1.0.04.
View 3 Replies
ADVERTISEMENT
Apr 1, 2010
I have a new Linksys E3000, 2 wired disktops (1 windows 7, 1 windows vista), 2 wireless laptops (both windows Vista), whenever the computers power down into sleep mode and are woke up, I have lost my connections to the router and I am forced to restart the computer. I've been told by one person that this is a problem with vista and windows 7, but wouldn't that have been a problem with my old router also?
View 9 Replies
View Related
Aug 17, 2012
I lost my cd for my router e3000 any way still to use it?
View 1 Replies
View Related
Jan 27, 2012
I have the E3000 and have attched a WD 1TB USB drive. I set it up for FTP and Media sharing and it worked fine but somehow recently I could not connect anymore. I checked the router and all of my setting for the FTP and Media server were gone. The disk drive still shows avaiable but now it shows the entire 1TB free (it was at least half used). This is the second time this has happened, first I tjhought it was a bad disk and replaced it but now it happened again. I did do a power cycle some time ago but I remember it still work after that. Not sure why I am losing my settings. This does not give me a comfort level as to storing anything valuable on that drive.
View 1 Replies
View Related
Dec 16, 2012
I had my external drive plugged into the e3000 with the network drive mapped on 2 laptops. One day my connection was slow so I backdoored the router ip (I didn't use cisco connect) to reset the router from my iPhone. I'm not sure exactly what was changed, but the partition disappeared from the drive. I've used a couple file recovery programs to try and retrieve the 250+ Gb data that was on the drive with no luck. They only find "deleted" files. Not the 13k files that were there and not deleted. The drive was never bootable. What to be used to recover the files.
View 1 Replies
View Related
Sep 7, 2010
Issue with Linksys E3000 router (firmware 1.0.02). I'm experiencing issues with the following wireless connections:
-iPhone 4G (wife's)
-iPod Touch 2G
-PC with wireless connection (non Linksys brand adapter)
-Acer NetBook (non Linksys brand adapter)
The issue is the connection gets interrupted and dropped, but the devices and the router DHCP clients table show the connections are still present. By interruption, I mean no data traffic is being transmitted.My wife's iPhone 4G and my son's iPod Touch wifi both show they are connected to the home network, complete with wifi bars being displayed, and the checkmark is present next to the home network connection in the the device settings for both. When I check the E3000 DHCP clients table, both Apple devices are listed as holding a connection. Yet both devices display network errors when trying to use any app that connects to the internet. By restarting the wifi connection on each, the connection is restored to the point where traffic now transmits. My wife and son estimate it is after about 10 minutes that they encounter the interruptions.
On the PC and NetBook, the connections have to be terminated and reconnected. I have not timed these to see how long before the connection becomes problematic.Interestingly, my ASUS laptop and my iPhone 4G do not have the issue, nor does my work laptop (Dell).There are no timeout parameters in the router config. Closest thing to it is the Beacon Interval, but I don't know which way to adjust it (up or down) to manage the devices that are experiencing interruptions. I have not made any interval adjustments...at this time, everything is set to default settings.This E3000 replaced an aging WRT54 (hardware v2) router so that I could have an N router in the house.
View 9 Replies
View Related
Dec 26, 2011
I recently set up a wrt54g router that I got used from a friend. I pressed the 'reset' button on the back, configured it for my computer according to the instructions on the website, and everything worked fine for a couple of days. Then I lost connectivity, tried powercycling my modem, but had to reset and reconfigure the router again. Worked fine again for a couple of days, then the problem repeated itself, so I reset and reconfigured again.
View 1 Replies
View Related
Oct 28, 2012
Noticed this AM that a new firmware was releaesed to my EA6500!! Very surprised to find it Monday AM. I went ahead & updated my firmware but lost connectivity to my Comcast cable modem. I was leaving for work so I had to pull the router & revert back to my original Linksys router.zBig storm heading my way, figured the wifw ywould need internet to track Hurricane Sandy. Any others have a new firmware waiting for install this AM? Keeping my fingers corossed on this firmware upgrade. I'm hoping it solves the device map issue.
View 2 Replies
View Related
Dec 2, 2011
I updated the fimware on my WRT160N v3 and followed it up with a reset of the router. I then restored the router settings that I had saved. All the settings appeared to be good, but none of my wireless devices would connect. I reneted the pass phrases (WPA2) but still nothing. Tried to change the passphrase, still no good. I then did a factory reset of the router from the setiings page and manually re-entered and save the settings, again nothing. All of my devices are able to "see" the network and the correct SSID.
View 9 Replies
View Related
Dec 28, 2011
I just connected a WRT190N v2 Wireless Router to my XPS 400. When my wife tried to connect our other desktop to the wireless network, everything seemed fine. I noticed that, when she wasn't actively browsing or using the network, her computer would lose connectivity, but regain it when a browser was opened. When I tried to use the XPS, I found that it had no connection. I regained connectivity after using the Windows Network Diagnostic tool, but neither computer seems to keep connectivity when left alone, at least for very long.
View 1 Replies
View Related
Feb 1, 2013
Region : Sweden
Model : TL-MR3420
Hardware Version : V1
Firmware Version : TL-MR3420_V1_121123
ISP : Tre
I have owned the TL-MR3420 for about six months and never had any problems with it, 3G connection stable enough and wifi and LAN worked properly without any drops.About one week ago I started experiencing problems. Both wifi and LAN gets disabled and I need to pull the plug and do a hard reset to correct the issue. This only happens after some heavy use, many devices is connected to Wifi, streaming files over the WIfi and so on. A scenario may be the following; there are six devices back home using all using wifi. All of them are not connected at the same time, but four may be; usually three computers and one tablet. The HTPC may do some heavy videostreaming from another computer. When the streaming is over, some devices are shut down then I may lose the WIFI and LAN ability of the router.
I have tried connecting with cable after wifi were lost but no IP address where given to it and connection where refused. This means I have no possibility to access the log file in the router, and after reboot the log file is reset. Router settings is pretty much default.Is my device broken or is there any setting I may tweak with?I have updated to latest firmware and tried to change channel without success.
View 3 Replies
View Related
Oct 28, 2010
Bought a month or 2 ago, configured and installed as our public access point. Worked well except for locking up weekly. A few weeks back, I lost all connectivity with it. It will get power, but no wireless and no Ethernet lights on the front. I attempted to reset it with no luck. Firmware is V01.
View 1 Replies
View Related
Aug 10, 2012
I recently upgraded to a new computer, it runs beautifully as expected however I encounter this problem with gaming. Whenever I hop in a game such as Dead Island, Arma 2 : CO (Day Z), Stalker : CoP, even Skyrim ( with SKSE, standard it ran okay. ) my connection will drop for my entire local network. I can still connect to my router, and it shows that I disconnect and reconnect with a new IP, from the logs it seems to be unprovoked. A few games will operate normally, however with Stalker, I play completely offline, and my connection still drops. It's not an instant disconnect, and it generally varies in time. However, when I'm not gaming, I get a steady connection with no issues, I get advertised speeds and can stream videos, and download perfectly fine. I've tried a USB wireless adapter to cross my motherboard off the list, and it encountered the same issue. But this problem just started occurring when I got the new computer.
View 9 Replies
View Related
Jul 3, 2011
A few days ago my desktop (which is hardlined into a router) lost all connectivity. My wireless connections work fine and i have began basic troubleshooting; changing ethernet cables, taking router out of the mix, etc. Beginning to think the ethernet port on pc is going out (NIC card?). Funny thing is, it will come back intermitantly for 10 minute increments. power cycling does nothing.
View 8 Replies
View Related
Jan 16, 2011
Internet connection was lost after a recent program download that some had flagged with suspcious nature. A static IP address had been established through a Netgear (WNDR3300) router with an antiquated Netopia modem. Static address/Defaut gateway has always began as: 192.168..... After connection loss, reset (or so I think) IPv4 properties back to: Obtain IP address automatically and have received an IP address as: 169.254.172.83. Also have not been able to access router or modem settings/configurations page(s).
View 1 Replies
View Related
Apr 3, 2011
I have a L2L IPSEC tunnel between a set of failover pair of two ASA5510's and a single ASA5505. Over time they will loose connectivity through the tunnel. The tunnel itself stays up, but cannot pass any traffic.When looking at the tunnel I always see this on the set of 5510's (marked in bold @ IPSEC ID 3)?
View 5 Replies
View Related
Mar 8, 2013
In my 3750 stack switch there are more than 10 L3 vlans currently in use.In that only one vlan for example vlan 11 (we given up link directly to the nodes connected to that ports which is in vlan 11)losing connectivity for sometime and again connectivity restored.Except Vlan 11 all other vlans are working fine. When we troubleshooted the issue some of the ip's able to ping and some not able to ping. checked the interface status of that ports (no crc and input errors) and port is in up status only.we also checked cpu utlilisation ,device uptime, all are no issues found. am sharing my sw basic config and one interface status at the time of issue.But only one port learning more than 50 Mac-Addresses dynamically.and am learning mac address violation in another port which is port security and storm control enabled on that port..Its seems to be any attack or something else????
interface GigabitEthernet1/0/20
--More-- description
switchport access vlan 11
switchport mode access
spanning-tree portfast
logs:
Mar 8 05:58:25.848 IST: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 0026.0a18.8218 on port GigabitEthernet1/0/16.
Mar 8 05:59:25.862 IST: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 0026.0a18.8218 on port GigabitEthernet1/0/16.
AT the time of issue interface status:
sh int gi2/0/14
GigabitEthernet2/0/14 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is 0026.ca46.5c8e (bia 0026.ca46.5c8e)
Description:
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,[code]......
View 4 Replies
View Related
Dec 28, 2011
My mother's computer periodically loses internet connectivity. This happens regardless of the browser (IE or Firefox). She must restart her computer to get access again. This happens regardless of her internet connection. She uses verizon at her home and accesses through my wireless router when visiting. This also happens if she is on a public access network such as a hospital
View 1 Replies
View Related
Aug 24, 2011
I am working on my Mom's computer so I will need to download any files to a flashdrive to transfer. Her Compaq CQ5110Y Vista 32/bit pk 1 has lost it's network. I also just discovered a Trojan Horse Dropper in the BSTQBackA file. Did I mention I know nothing about this tech stuff? Norton states some files cannot be healed?
View 3 Replies
View Related
Apr 22, 2012
I have a Linksys E3000 router set as Lan-Lan 192.168.0.2 hosting my internal LAN connected to a motorola Surfboard (Brighthouse) internet Wireless/Wired access point 192.168.0.1.I have a Web server hosting a site connected direct to the surfboard (works fine) . The FTP "site" on the E3000 can be seen by all pcs on the internal LAN. However, it can NOT be seen from the internet (Android with FTP client being used for test device)
Primary Access point 192.168.0.1
DCHP server with reserved IP addresses for server and PC's and smartphones
Port Forwarding Set for Server at 0.004 : 80
Port Forwarding Set for E3000 at 0.002 :21
Secondary (E3000) router 192.168.0.2
DCHP server is disabled
Port Forwarding is Not being used
connected to primary router LAN port 1 by LAN port 1 on E3000
All pc's can access the Internet when connected to the E3000 via cable or wireless?All pc's can access the FTP server on E3000 via cable or wireless as a LAN location (connected to either router)?How can I get the FTP to be seen from the internet ?
View 2 Replies
View Related
Jun 29, 2011
I recently bought a Cisco e3000 router. I updated the firmware but I am still only getting 1.33 Mbps at most. The only things plugged into it is my PC and my xbox. I bought the router so i could get a better connection on my xbox so netflix wont stop playback.
View 9 Replies
View Related
Feb 22, 2012
We have a Linksys wireless router and have lost the WEP KEY. How can we determine what it is?
View 1 Replies
View Related
Jan 15, 2013
RV220W worked good with QuickVPN, but suddenly lost such ability and doesn't allow connection from any Windows machine (Xp,Win7 32/64 bit)
QuickVPN is ver. 1.4.2.1
Cisco RV220W firmware is ver. 1.0.4.17
Client error on Windows XP in Log.txt :
[STATUS]OS Version: Windows XP
[STATUS]Windows Firewall is OFF
[STATUS]One network interface detected with IP address 10.1.1.165
[STATUS]Connecting...
[DEBUG]Input VPN Server Address = x.x.x.x
[code]...
View 4 Replies
View Related
Jan 3, 2012
My daughters Studio 17 laptop lost all internet connectivity. Wired and Wireless. I have been searching all kinds of threads but don't seem to find a solution to this issue. I have done two systems recoveries to earlier dates when we know it was working to no avail. I have 3 other computers on this network and none are experiencing any issues. I did just change from DSL to cable broadband, but the computer was fine until Monday night. Not sure what is going on. Does a system recovery will undo Windows updates? The most recent updates took place on 1/4/2012, which is about the time the problem showed up. I am going to uninstall those updates, 2 Security Update for Windows, and see what happens. Stand by. No good. It didn't work. I see a lot of people who are having the same problem here recently so something must have changed.
Windows 7
Dell Studio 17 Model PP33L
Microsoft Security Essentials
Windows Firewall
View 8 Replies
View Related
Apr 2, 2012
I have an e3000 that cannot obtain an address from the ISP. I can get an address on the computer and an old router by directly connecting the cable to the computer or the router. I can also daisy-chain the e3000 to the old router, and I can get an address on the e3000 from the old router. I have hard reset the e3000, changed firmware from the Linksys to TomatoUSB and back to Linksys, and I still can't get it to work. It worked fine on Saturday until a bolt of lightning hit close to the house. Since then, I cannot get the e3000 to connect to the ISP.
View 9 Replies
View Related
Jul 11, 2011
How do you set up the E3000 for ATT u-verse?
View 2 Replies
View Related
May 9, 2012
install linksys e3000.
View 1 Replies
View Related
Oct 26, 2012
I had a failed Tomato upgrade and now Connect Setup can't see router to revert back to original. I get message 82BD0101 or computer not connected to router. Also the http://192.168.1.1 trick won't work. Is there any way to restore besides 30/30/30?
View 2 Replies
View Related
Nov 3, 2012
I would like to override the DNS servers provided by DHCP via my ISP. The other settings I would like to preserve (like my assigned IP).How to achieve this with E3000 ?
View 3 Replies
View Related
Feb 17, 2011
It seems like after a certain amount of time, maybe a few days... my E3000 gets slowww.. I'm talking dog slow. And it's not just the internet, I have a media server connected to it, and usually when I put something on it, the transfer rate is about 3.5MB/s (not bits, bytes). But everything is slow, I top out at speed of maybe 1/6 normal on the internet as well.
View 8 Replies
View Related
Aug 21, 2011
We have a wireless internet service. Not satellite. We basically have an antenna on our house that picks up the signal from a tower a mile or two away. I used the e3000 router when we lived in town with broadband internet and it worked fine. I can't get it to keep a hold of a signal. I can connect to the router from the computers but the router drops the signal from the tower. I have an old router that the wireless company was kind enough to lend me that works , but the signal is weak and it could die at any moment... I"m at my wits end.. I have an expensive piece of equipment that wont hold the signal. I have updated the firmware and the Cisco connect software..
View 5 Replies
View Related
Apr 19, 2010
Has anyone tested QoS on the new E3000? Whenever I add an application (e.g. Voice Device) and set priority to Medium or High, my upstream bandwidth for everything else is immediately cut significantly, even when I'm not using the priority application.
For example, with QoS disabled, I can consistently get 10Mb upstream (speedtest.comcast.net). As soon as I enable QoS, upstream is capped to exactly 2Mb! On my old router, there was an option to set the total upstream bandwidth -- but on the E3000 there is no such option that I can find.
View 9 Replies
View Related
May 18, 2011
just bought an e3000 and want to use it with wireless internet- usb modem. when setting up it wouldnt go any further than the 'searching for connection' page as it couldnt detect a connection in the 'internet' lan (wan?) port.can i set it up to accept the wireless usb modem?
View 6 Replies
View Related