Linksys Wireless Router :: Set Up E3000 For ATT U-verse?
Jul 11, 2011How do you set up the E3000 for ATT u-verse?
View 2 Replies
ADVERTISEMENT
Linksys Wireless Router :: E3000 Behind ATT U-Verse / Cannot Access Internet
Feb 24, 2011I can now access my router config pages when connected to my ATT router. However, I cannot seem to access the Internet when connected to my e3000; I just time out. I also have difficulties just connecting to my e300 for some reason. I have been connected a couple of times where i could access the Internet but it was only for a few minutes and it was very slow.I can't seem to put the router in the DMZ because the ATT router will only DMZ a DHCP-enabled device and the e3000 has a static IP (192.168.1.253). I have tried running the PING and Traceroute diagnostics and both just come back with Unknown Host no matter what URL i enter. The status page also appears as if the e3000 is not properly talking to the ATT router. Under the Internet Connection area it shows Connection Type: Automatic Configuration - DHCP then 0s for IP address, subnet, and gateway. the DNS entries are empty and the MTU shows 1500 and the DHCP Lease Time is also empty. i am all ears and willing to try whatever. But i just want to be able to connect to my e3000 so i can utilize the wireless n internally and connect a 2TB external drive to share. But I also want to be able to get out to the Internet when i am connected to the device.
View 6 Replies View RelatedLinksys Wireless Router :: Using WRT54Gl With AT&T U-Verse?
Jun 20, 2012I'm trying to use a WRT54GL with U-Verse. The problem is that the router does not get a connection to the modem. It can't ping the modem, and it doesn't show up on on the list of devices connected to the modem. DHCP assigns an IP address of 127.0.0.1, which is outside the range of the modem [192.168.1.1 ... 192.168.1.253]. The router is also showing a default gateway of 0.0.0.0, and a subnet mask of 255.0.0.0. (And yes, I have released and renewed the lease, rebooted the modem, and reconnected the modem.) The router WAN side is set to DHCP, and the operating mode was changed from gateway to router (the gateway setting doesn't work either, for that matter).
View 9 Replies View RelatedLinksys Wireless Router :: E1200 As Access Point With U-Verse
Jul 12, 2012Trying all week to get my E1200 setup as an Access Point with my AT&T U-Verse 2WIRE Modem. [code] It just never seems to work correctly. It will connect for a second or 2 and then jam up. My ultimate scenario would be to have the E1200 just act as a wireless access point and have the 2WIRE do the rest: firewall, DCHP, etc.
View 9 Replies View RelatedLinksys Wired Router :: BEFRS81 Swapping AT&T DSL And Comcast Cable For U-verse
Nov 8, 2011I am swapping my AT&T DSL and Comcast cable for U-verse. In the basement, I have a Netopia DSL modem connected to a Linksys BEFRS81 v. 3 ethernet Cable/DSL router/8-port switch. Cat 5 cables are attached to the router, then run throughout the house so we are "networked" to the DSL modem and use a patch cord from laptop or desktop into the wall to get to the Internet.
View 1 Replies View RelatedHow To Install A Netgear N600 To A U-verse Router
Apr 3, 2012how to wire a netgear n600 to a U-verse router in order to strengthen the wifi signal
View 1 Replies View Related3600HGV / Setting Up U-Verse To Use Standalone Router?
May 10, 2012Just got U-Verse High Speed 10mbps/1mbps. However it came with a 2wire 3600HGV router/modem combo but I prefer my old apple airport + modem setup. I looked around the 2wire's GUI and it didn't have anything for Bridge Mode like other gateways I use to have. How are you setting up your U-verse to use standalone router?
View 11 Replies View RelatedLinksys Wireless Router :: E3000 FTP Not Seen On The WAN
Apr 22, 2012I have a Linksys E3000 router set as Lan-Lan 192.168.0.2 hosting my internal LAN connected to a motorola Surfboard (Brighthouse) internet Wireless/Wired access point 192.168.0.1.I have a Web server hosting a site connected direct to the surfboard (works fine) . The FTP "site" on the E3000 can be seen by all pcs on the internal LAN. However, it can NOT be seen from the internet (Android with FTP client being used for test device)
Primary Access point 192.168.0.1
DCHP server with reserved IP addresses for server and PC's and smartphones
Port Forwarding Set for Server at 0.004 : 80
Port Forwarding Set for E3000 at 0.002 :21
Secondary (E3000) router 192.168.0.2
DCHP server is disabled
Port Forwarding is Not being used
connected to primary router LAN port 1 by LAN port 1 on E3000
All pc's can access the Internet when connected to the E3000 via cable or wireless?All pc's can access the FTP server on E3000 via cable or wireless as a LAN location (connected to either router)?How can I get the FTP to be seen from the internet ?
Linksys Wireless Router :: How To Get Most Out Of E3000
Jun 29, 2011I recently bought a Cisco e3000 router. I updated the firmware but I am still only getting 1.33 Mbps at most. The only things plugged into it is my PC and my xbox. I bought the router so i could get a better connection on my xbox so netflix wont stop playback.
View 9 Replies View RelatedLinksys Wireless Router :: E3000 No Address From ISP On WAN?
Apr 2, 2012I have an e3000 that cannot obtain an address from the ISP. I can get an address on the computer and an old router by directly connecting the cable to the computer or the router. I can also daisy-chain the e3000 to the old router, and I can get an address on the e3000 from the old router. I have hard reset the e3000, changed firmware from the Linksys to TomatoUSB and back to Linksys, and I still can't get it to work. It worked fine on Saturday until a bolt of lightning hit close to the house. Since then, I cannot get the e3000 to connect to the ISP.
View 9 Replies View RelatedLinksys Wireless Router :: Way To Install E3000
May 9, 2012install linksys e3000.
View 1 Replies View RelatedLinksys Wireless Router :: Restore Ver.1.0.04 On E3000?
Oct 26, 2012I had a failed Tomato upgrade and now Connect Setup can't see router to revert back to original. I get message 82BD0101 or computer not connected to router. Also the http://192.168.1.1 trick won't work. Is there any way to restore besides 30/30/30?
View 2 Replies View RelatedLinksys Wireless Router :: E3000 - Override Only DNS From ISP
Nov 3, 2012I would like to override the DNS servers provided by DHCP via my ISP. The other settings I would like to preserve (like my assigned IP).How to achieve this with E3000 ?
View 3 Replies View RelatedLinksys Wireless Router :: E3000 Gets Slow After A While
Feb 17, 2011It seems like after a certain amount of time, maybe a few days... my E3000 gets slowww.. I'm talking dog slow. And it's not just the internet, I have a media server connected to it, and usually when I put something on it, the transfer rate is about 3.5MB/s (not bits, bytes). But everything is slow, I top out at speed of maybe 1/6 normal on the internet as well.
View 8 Replies View RelatedLinksys Wireless Router :: E3000 Cannot Keep Signal
Aug 21, 2011We have a wireless internet service. Not satellite. We basically have an antenna on our house that picks up the signal from a tower a mile or two away. I used the e3000 router when we lived in town with broadband internet and it worked fine. I can't get it to keep a hold of a signal. I can connect to the router from the computers but the router drops the signal from the tower. I have an old router that the wireless company was kind enough to lend me that works , but the signal is weak and it could die at any moment... I"m at my wits end.. I have an expensive piece of equipment that wont hold the signal. I have updated the firmware and the Cisco connect software..
View 5 Replies View RelatedLinksys Wireless Router :: Testing QoS On New E3000
Apr 19, 2010Has anyone tested QoS on the new E3000? Whenever I add an application (e.g. Voice Device) and set priority to Medium or High, my upstream bandwidth for everything else is immediately cut significantly, even when I'm not using the priority application.
For example, with QoS disabled, I can consistently get 10Mb upstream (speedtest.comcast.net). As soon as I enable QoS, upstream is capped to exactly 2Mb! On my old router, there was an option to set the total upstream bandwidth -- but on the E3000 there is no such option that I can find.
Linksys Wireless Router :: Use Internet With E3000?
May 18, 2011just bought an e3000 and want to use it with wireless internet- usb modem. when setting up it wouldnt go any further than the 'searching for connection' page as it couldnt detect a connection in the 'internet' lan (wan?) port.can i set it up to accept the wireless usb modem?
View 6 Replies View RelatedLinksys Wireless Router :: Lost Cd For E3000?
Aug 17, 2012I lost my cd for my router e3000 any way still to use it?
View 1 Replies View RelatedLinksys Wireless Router :: E3000 - Wi-Fi Not Working
Oct 20, 2010I just bought an E3000 about 30 hours ago and just unrealistically my router now doesn't want to give me any WiFi at all. I tried reset button, tried re plugin all of my system as well as pressing for short and long period the middle button that indicates WiFi is accessible. I already bought 3 linksys routers.
View 2 Replies View RelatedLinksys Wireless Router :: E3000 - How To Get It Working
Aug 25, 2011Looking at upgrading my router to an e3000 however I've got a couple of questions. I might come across as a bit thick with this one but I have read that you need a modem to make the router work, I can't get my head around this as I've not come across this before. I always thought the router was the modem!! I've also heard that the E3000 only works with cable ISP and not ADSL, is that true?
View 2 Replies View RelatedLinksys E3000 Wireless-N Router Slow Speed?
Feb 25, 2011I have FiOS and their supplied wireless router Actiontec #MI424WR. I have home theater equipment that uses the newer N signal so I purchased a Linksys E3000 Wireless-N Router. I have one of the LAN outputs on the Actiontec feeding the Linksys input and Wi-Fi turned off on the Actiontec. This is working good for my wireless home theater equipment but I am having problems with my wired speed. It has gone from averaging anywhere from 20 to 30 mbps on numerous test sites when plugged into the Actiontec to averaging around 10 mbps when plugged into the Linksys.
1) Is my wireless N speed going to top out at 10mbps or less since that is all the router is showing on wired? Shouldn�t N be broadcasting a faster speed if given the ability?
2) I have my computer currently plugged directly into the Linksys verses the Actiontec. This makes it easier to program the Linksys router. Since I am no longer using the wireless part of the Actiontec there really is no need to be plugged into it. Is there anything I can do get the speed higher on the Linksys, a setting I can change? Will I have to plug the computer back into the Actiontec to get the higher speed and then move it every time I may need to make a change to the Linksys?
Linksys Wireless Router :: Upgrade From WRT52G To E3000?
Jun 5, 2012Want to switch to dualband E3000 from older, working fine except needs resetting often. What steps do I need to take? I do not have E3000 setup disk. I fear that I will go down a path that makes both of the routers unusable, at least down many hours.
View 9 Replies View RelatedLinksys Wireless Router :: How To Use E3000 Dhcp Through Wifi
Aug 22, 2011I've been searching how to make my E3000 use the DHCP and IP address on my primary router so I can share printers and computers on same gateway IP. I tried turning off DHCP on E3000, but not sure how to tell it to use the DHCP from the source "INTERNET"
View 1 Replies View RelatedLinksys Wireless Router :: E3000 Will Not Connect To Internet?
Aug 30, 2011shows connection to cable modem, shows IP lease, able to renew and release lease. shows all DCHP clients, but does not allow internet to get through. tried cloning old routers MAC, no dice.
View 6 Replies View RelatedLinksys Wireless Router :: Finding Password On E3000?
Nov 5, 2011A retailer (Best Buy's Geek Squad) made adjustments to my Linksys E3000 router when I bought a Sony Media Player from them a number of months ago. It was the first wireless device integrated into my wired LAN network (three computers).
In attempting to set up a GUEST connection, I pulled up Cisco Connect which I originally used to set up my network. The BB Geek didn't use a key and followed a different procedure unknown to me.
As I face the Cisco Connect screen now, it tells me "Can't access your router settings. The router password has been changed." Then in the "Router password" block, it gives the original password I assigned.
I had written another name I thought was associated with the changes made by the BB Geek so I copied the password there now, inserted the new PW, and clicked Next. I was then asked if I wanted to proceed with the change ... but the change it was proposing was the exact PW I just copied. Confused, I cancelled the operation.
Linksys Wireless Router :: Get Line Stats With E3000?
Mar 4, 2012I am using a E3000 router with a Draytek V120 modem and I need to get some line stats for my ISP to sort out a problem however I cant see how to get stats out of the E3000, simple but having been through all the settings in the web interface I cant find it.
View 1 Replies View RelatedLinksys Wireless Router :: E3000 Slows Down With IPads
Jul 23, 2011Ever since I started using iPads at the house I have had to reboot the router about once a week because the download speeds drops by approximately 90%. As soon as the reboot completes all is right with the world for about another week. During the course of the week, but not all at once, we will have 4 iPads, 3 iPhones, 2 laptops and one desktop(wired), a Verizon signal booster and house guests. I have updated the firmware.
View 1 Replies View RelatedLinksys Wireless Router :: E3000 - Specifications On Range?
Apr 10, 2010Any spec on the range of this router. I bought it last night to replace my existing Linksys WRT300N and it appears it does not even come close to matching the WRT300N's signal range. In fact, the new E3000 barely covers 1/2 the area my 300N did.
Network mode: Mixed
Channel Width: Auto (20Mhz or 40Mhz)
Channels: Auto DFS
I have the E3000 in the middle basement (same location at 300N) and i barely get a signal 1 floor above and 25 feet away. In fact, I get no signal in my kitchen.
Linksys Wireless Router :: Connecting E3000 To DIRECTV DVR?
Sep 12, 2011I want to setup a hardwired connection between my Linksys E3000 router and a DIRECTV DVR. I have the most recent firmware on my router. I have checked the ethernet cable and it is good. The lights on the ethernet port on the DVR light up when I have the DRV and router connecter. The DVR gives me an error message when I try to connect. Some other posts have suggest setting a static IP on the DIRECTV DVR using the following settings:
IP Address : 192.168.1.10
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
DNS : 192.168.1.1
I tried this and still get an error message so I am going to call DIRECTV. Before I do call I would like to know if these are the correct settings for a Static IP?
Linksys Wireless Router :: Using E3000 Just As Access Point?
Mar 1, 2012I have a Cisco RV082 and I would like to connect my E3000 to it and use it as just a wireless access point. Is it possible to do this with the E3000 so the RV082 is providing the routing functionality?
View 1 Replies View RelatedLinksys Wireless Router :: Setup E3000 As Bridge?
Feb 24, 2012I've small corporate network with Cisco 800 as main DSL router/firewall/DHCP. I'd like to setup Linksys E3000 (firmware: 1.0.01) as bridge (no DHCP, only wireless repeater), but there is no "bridge mode" in E3000 interface
View 9 Replies View RelatedLinksys Wireless Router :: E3000 FTP Cannot Accept A Log-in From Outer IP
Mar 26, 2011No Matter what I use-admin/new user or group I assign... CAN NOT login from the outside IP!I can see it/map it and access it all day from my network, no problem. I get at 530 login error everytime I try to come in from the outer world. I have a static IP and cannot get in. It will prompt me for user name and password so I know it is responding to my query. I need to get this fixed ASAP!
View 8 Replies View RelatedLinksys Wireless Router :: E3000 Flashing Power LED
Nov 6, 2010The power light keeps flashing. I tried to download the firmware, but when I click on the link it says the page cannot be found.
View 9 Replies View Related
