Linksys Wireless Router :: E3000 FTP Cannot Accept A Log-in From Outer IP

Mar 26, 2011

No Matter what I use-admin/new user or group I assign... CAN NOT login from the outside IP!I can see it/map it and access it all day from my network, no problem. I get at 530 login error everytime I try to come in from the outer world. I have a static IP and cannot get in. It will prompt me for user name and password so I know it is responding to my query. I need to get this fixed ASAP!

View 8 Replies


ADVERTISEMENT

Linksys Wireless Router :: WRT54G Won't Accept Firmware V4.21.5

Jun 4, 2012

My current unit is at  Firmware Version: v1.02.8 What can I do?

View 3 Replies View Related

Linksys Wireless Router :: EA6500 Won't Accept Connection?

Feb 11, 2013

When I plug in the power cord to my EA6500 all the LED's on the back, and the white Cisco on the front come on solid, then the lights on the back go out and the white Cisco light starts blinking faster than every second. I can't get it to stop blinking no matter what I've tried so far.
 
It won't let me connect to it at all.  I've tried everything I can think of, and have tried almost everything I could find in Troubleshooting in Cisco Community.  The Linksys Smart Wi Fi  Router setup says "We could not find your router."
 
I've also tried using the red Reset button and the light never stops flashing.  I've tried pushing the button quickly, holding it down for ten seconds, and holding it down for more than 30 seconds, but the light continues to blink.  I've also unplugged it and waited more than 10 seconds, but nothing seems to work.

View 2 Replies View Related

Linksys Wireless Router :: EA4500 Won't Accept Password / Key For 5g Band

Jul 11, 2012

I just upgraded to the EA4500 for added range, etc. I'd like to let TiVo have the 5g side and use the 2.4g side for everything else. How can I even tell which band TiVo is using?
 
I tried setting TiVo up manually but it won't accept the password/key for the 5g band. I gave up and used the "push button" method, but I have a feeling that puts it on the 2.4g band.I do have two different SSIDs and two different passwords.

View 6 Replies View Related

Linksys Wireless Router :: WRT120N - QOS Doesn't Accept Phone MAC Address

Jan 23, 2012

My Linksys WRT120N router doesn't accept my cellphone's MAC address... Phone's MAC address is AC:81:F3:08:13:F5 but upon adding the MAC address Internet Access Priority Category based on MAC address, I get an error "Assign MAC address is incorrect".

View 1 Replies View Related

Linksys Wireless Router :: Setup EA6500 To Accept FTP Requests To Windows Home Server?

Apr 18, 2013

I am looking at buying the EA6500 router.  However, before I make the investment into buying this router, I need to know some basic information first.

1. I want to setup the EA6500 to accept FTP requests to my Windows Home Server.   Yes or No?
2. Remote access to the EA6500,  Yes or No?  i am aware of the security risks
3. I need to setup Port forwarding on the EA6500.  I assume I can?
4. Manage a Kindle Fire and other wireless devices?

View 5 Replies View Related

Linksys Wireless Router :: E1000 - Reset 4 Times But Not Accept Username / Password Input

Oct 10, 2011

I changed my E1000 router name successfully, and then went into the Administration section to change my password.  After changing the password and clicking on Save a small screen pops up asking me to verify my router's username and password.  When I enter the exact same user name and password it does not accept them.  When I try to enter the old user name and password it does not accept them either.  I then try combinations of the two and it still will not accept the input.  I have reset my router 4 times now and this keeps occurring.  I am completely baffled.

View 6 Replies View Related

Linksys Wireless Router :: WRT120N - Can't Accept Login Credentials When Login From IE10 Browser

May 9, 2013

 We have a Linksys WRT120N wireless router set up at one of our small offices. I noticed recently when trying to log in to the router to make some admin configurations that it will not accept the login credentials when trying to log in from IE10 browser. Works fine from Chrome, IE9, ect. logging in to a linksys router with IE10?

View 3 Replies View Related

Linksys Wireless Router :: E3000 FTP Not Seen On The WAN

Apr 22, 2012

I have a Linksys E3000 router set as Lan-Lan 192.168.0.2 hosting my internal LAN connected to a motorola Surfboard (Brighthouse) internet Wireless/Wired access point 192.168.0.1.I have a Web server hosting a site connected direct to the surfboard (works fine) . The FTP "site" on the E3000 can be seen by all pcs on the internal LAN. However, it can NOT be seen from the internet (Android with FTP client being used for test device)
  
Primary Access point 192.168.0.1
DCHP server with reserved IP addresses for server and PC's and smartphones
Port Forwarding Set for Server at 0.004 : 80
Port Forwarding Set for E3000 at 0.002 :21
 
Secondary (E3000) router 192.168.0.2
DCHP server is disabled
Port Forwarding is Not being used
connected to primary router LAN port 1 by LAN port 1 on E3000
 
All pc's can access the Internet when connected to the E3000 via cable or wireless?All pc's can access the FTP server on E3000 via cable or wireless as a LAN location (connected to either router)?How can I get the FTP to be seen from the internet ?

View 2 Replies View Related

Linksys Wireless Router :: How To Get Most Out Of E3000

Jun 29, 2011

I recently bought a Cisco e3000 router. I updated the firmware but I am still only getting 1.33 Mbps at most. The only things plugged into it is my PC and my xbox. I bought the router so i could get a better connection on my xbox so netflix wont stop playback.

View 9 Replies View Related

Linksys Wireless Router :: E3000 No Address From ISP On WAN?

Apr 2, 2012

I have an e3000 that cannot obtain an address from the ISP.  I can get an address on the computer and an old router by directly connecting the cable to the computer or the router.  I can also daisy-chain the e3000 to the old router, and I can get an address on the e3000 from the old router.  I have hard reset the e3000, changed firmware from the Linksys to TomatoUSB and back to Linksys, and I still can't get it to work.  It worked fine on Saturday until a bolt of lightning hit close to the house.  Since then, I cannot get the e3000 to connect to the ISP.  

View 9 Replies View Related

Linksys Wireless Router :: Set Up E3000 For ATT U-verse?

Jul 11, 2011

How do you set up the E3000 for ATT u-verse?

View 2 Replies View Related

Linksys Wireless Router :: Way To Install E3000

May 9, 2012

install linksys e3000.

View 1 Replies View Related

Linksys Wireless Router :: Restore Ver.1.0.04 On E3000?

Oct 26, 2012

I had a failed Tomato upgrade and now Connect Setup can't see router to revert back to original. I get message 82BD0101 or computer not connected to router. Also the http://192.168.1.1 trick won't work. Is there any way to restore besides 30/30/30?

View 2 Replies View Related

Linksys Wireless Router :: E3000 - Override Only DNS From ISP

Nov 3, 2012

I would like to override the DNS servers provided by DHCP via my ISP. The other settings I would like to preserve (like my assigned IP).How to achieve this with E3000 ?

View 3 Replies View Related

Linksys Wireless Router :: E3000 Gets Slow After A While

Feb 17, 2011

It seems like after a certain amount of time, maybe a few days... my E3000 gets slowww.. I'm talking dog slow.  And it's not just the internet, I have a media server connected to it, and usually when I put something on it, the transfer rate is about 3.5MB/s (not bits, bytes).  But everything is slow, I top out at speed of maybe 1/6 normal on the internet as well.

View 8 Replies View Related

Linksys Wireless Router :: E3000 Cannot Keep Signal

Aug 21, 2011

We have  a wireless internet service. Not satellite. We basically have an antenna on our house that picks up the signal from a tower a mile or two away. I used the e3000 router when we lived in town with broadband internet and it worked fine. I can't get it to keep a hold of a signal. I can connect to the router from the computers but the router drops the signal from the tower. I have an old router that the wireless company was kind enough to lend me that works  , but the signal is weak and it could die at any moment... I"m at my wits end.. I have an expensive piece of equipment that wont hold the signal. I have updated the firmware and the Cisco connect software..

View 5 Replies View Related

Linksys Wireless Router :: Testing QoS On New E3000

Apr 19, 2010

Has anyone tested QoS on the new E3000? Whenever I add an application (e.g. Voice Device) and set priority to Medium or High, my upstream bandwidth for everything else is immediately cut significantly, even when I'm not using the priority application. 
 
For example, with QoS disabled, I can consistently get 10Mb upstream (speedtest.comcast.net).  As soon as I enable QoS, upstream is capped to exactly 2Mb! On my old router, there was an option to set the total upstream bandwidth -- but on the E3000 there is no such option that I can find.  

View 9 Replies View Related

Linksys Wireless Router :: Use Internet With E3000?

May 18, 2011

just bought an e3000 and want to use it with wireless internet- usb modem. when setting up it wouldnt go any further than the 'searching for connection' page as it couldnt detect a connection in the 'internet' lan (wan?) port.can i set it up to accept the wireless usb modem?

View 6 Replies View Related

Linksys Wireless Router :: Lost Cd For E3000?

Aug 17, 2012

I lost my cd for my router e3000 any way still to use it?

View 1 Replies View Related

Linksys Wireless Router :: E3000 - Wi-Fi Not Working

Oct 20, 2010

I just bought an E3000 about 30 hours ago and just unrealistically my router now doesn't want to give me any WiFi at all. I tried reset button, tried re plugin all of my system as well as pressing for short and long period the middle button that indicates WiFi is accessible. I already bought 3 linksys routers.

View 2 Replies View Related

Linksys Wireless Router :: E3000 - How To Get It Working

Aug 25, 2011

Looking at upgrading my router to an e3000 however I've got a couple of questions. I might come across as a bit thick with this one but I have read that you need a modem to make the router work, I can't get my head around this as I've not come across this before. I always thought the router was the modem!! I've also heard that the E3000 only works with cable ISP and not ADSL, is that true?

View 2 Replies View Related

D-Link DIR-655 :: Does It Make A Gateway Outer With An Internal DNS Function

Jul 9, 2012

Does it make a gateway outer with an internal DNS function

View 4 Replies View Related

Linksys E3000 Wireless-N Router Slow Speed?

Feb 25, 2011

I have FiOS and their supplied wireless router Actiontec #MI424WR. I have home theater equipment that uses the newer N signal so I purchased a Linksys E3000 Wireless-N Router. I have one of the LAN outputs on the Actiontec feeding the Linksys input and Wi-Fi turned off on the Actiontec. This is working good for my wireless home theater equipment but I am having problems with my wired speed. It has gone from averaging anywhere from 20 to 30 mbps on numerous test sites when plugged into the Actiontec to averaging around 10 mbps when plugged into the Linksys.

1) Is my wireless N speed going to top out at 10mbps or less since that is all the router is showing on wired? Shouldn�t N be broadcasting a faster speed if given the ability?

2) I have my computer currently plugged directly into the Linksys verses the Actiontec. This makes it easier to program the Linksys router. Since I am no longer using the wireless part of the Actiontec there really is no need to be plugged into it. Is there anything I can do get the speed higher on the Linksys, a setting I can change? Will I have to plug the computer back into the Actiontec to get the higher speed and then move it every time I may need to make a change to the Linksys?

View 2 Replies View Related

Linksys Wireless Router :: Upgrade From WRT52G To E3000?

Jun 5, 2012

Want to switch to dualband E3000 from older, working fine except needs resetting often.  What steps do I need to take?  I do not have E3000 setup disk.  I fear that I will go down a path that makes both of the routers unusable, at least down many hours.

View 9 Replies View Related

Linksys Wireless Router :: How To Use E3000 Dhcp Through Wifi

Aug 22, 2011

I've been searching how to make my E3000 use the DHCP and IP address on my primary router so I can share printers and computers on same gateway IP. I tried turning off DHCP on E3000, but not sure how to tell it to use the DHCP from the source "INTERNET"

View 1 Replies View Related

Linksys Wireless Router :: E3000 Will Not Connect To Internet?

Aug 30, 2011

shows connection to cable modem, shows IP lease, able to renew and release lease. shows all DCHP clients, but does not allow internet to get through. tried cloning old routers MAC, no dice.

View 6 Replies View Related

Linksys Wireless Router :: Finding Password On E3000?

Nov 5, 2011

A retailer (Best Buy's Geek Squad) made adjustments to my Linksys E3000 router when I bought a Sony Media Player from them a number of months ago. It was the first wireless device integrated into my wired LAN network (three computers).
 
In attempting to set up a GUEST connection, I pulled up Cisco Connect which I originally used to set up my network. The BB Geek didn't use a key and followed a different procedure unknown to me.
 
As I face the Cisco Connect screen now, it tells me "Can't access your router settings. The router password has been changed." Then in the "Router password" block, it gives the original password I assigned.
 
I had written another name I thought was associated with the changes made by the BB Geek so I copied the password there now, inserted the new PW, and clicked Next. I was then asked if I wanted to proceed with the change ... but the change it was proposing was the exact PW I just copied. Confused, I cancelled the operation.

View 8 Replies View Related

Linksys Wireless Router :: Get Line Stats With E3000?

Mar 4, 2012

I am using a E3000 router with a Draytek V120 modem and I need to get some line stats for my ISP to sort out a problem however I cant see how to get stats out of the E3000, simple but having been through all the settings in the web interface I cant find it.

View 1 Replies View Related

Linksys Wireless Router :: E3000 Slows Down With IPads

Jul 23, 2011

Ever since I started using iPads at the house I have had to reboot the router about once a week because the download speeds drops by approximately 90%.  As soon as the reboot completes all is right with the world for about another week.  During the course of the week, but not all at once, we will have 4 iPads, 3 iPhones, 2 laptops and one desktop(wired), a Verizon signal booster and house guests.  I have updated the firmware. 

View 1 Replies View Related

Linksys Wireless Router :: E3000 - Specifications On Range?

Apr 10, 2010

Any spec on the range of this router.  I bought it last night to replace my existing Linksys WRT300N and it appears it does not even come close to matching the WRT300N's signal range.  In fact, the new E3000 barely covers 1/2 the area my 300N did.
 
Network mode: Mixed
Channel Width: Auto (20Mhz or 40Mhz)
Channels: Auto DFS
 
I have the E3000 in the middle basement (same location at 300N) and i barely get a signal 1 floor above and 25 feet away.  In fact, I get no signal in my kitchen.

View 9 Replies View Related

Linksys Wireless Router :: Connecting E3000 To DIRECTV DVR?

Sep 12, 2011

I want to setup a hardwired connection between my Linksys E3000 router and a DIRECTV DVR.  I have the most recent firmware on my router.  I have checked the ethernet cable and it is good.  The lights on the ethernet port on the DVR light up when I have the DRV and router connecter.  The DVR gives me an error message when I try to connect.  Some other posts have suggest setting a static IP on the DIRECTV DVR using the following settings:
 
IP Address : 192.168.1.10
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
DNS : 192.168.1.1

I tried this and still get an error message so I am going to call DIRECTV.  Before I do call I would like to know if these are the correct settings for a Static IP?

View 7 Replies View Related

Linksys Wireless Router :: Using E3000 Just As Access Point?

Mar 1, 2012

I have a Cisco RV082 and I would like to connect my E3000 to it and use it as just a wireless access point.  Is it possible to do this with the E3000 so the RV082 is providing the routing functionality?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved