I cannot connect to the internet. After running troubleshooting i receive and error message."Local area connection 2" doesn't have a valid ip configuration.
[code]...
When I try to connect to the Internet it says that I am connected but have no Internet access. When I use the troubleshooter it says wireless network configuration does not have a valid ip configuration. I also tried using the Ethernet cable but it still says no Internet access.
View 8 Replies View RelatedI just got my internet hooked up in my new apartment yesterday, and it is not working when plugged directly into my laptop. It worked fine on the installer's laptop.A buddy of mine let me borrow his wireless rory to connect. I've tried disabling IPv6, restarting both the modem and my laptop, and updating the ethernet driver, which I could not find (HP dv2715nr is my model and I have windows 7 ultimate). elow is my ipconfig with the modem plugged in and the wireless turned off.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersAllan>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Allan-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code].....
I live in a college dorm room, and my internet stopped working about 2 days ago. My roommates don't have this problem. I don't know what kind of details to give you because I know nothing about this stuff.
Here's my ipconfig /all.
Windows IP Configuration
Host Name . . . . . . . . . . . . : silvery-snow
Primary Dns Suffix . . . . . . . :
[Code]......
Just bought a WRT400N and set it up using 5ghz and 2.4ghz bands, and using WPA TKIP for both. Problem is that both my laptop and my iphone occassionally lose connectivity and my iPhone says that my WPA key isn't valid.
View 4 Replies View RelatedMicrosoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersSyed>IPCONFIG /ALL
[Code]....
Whenever I try to connect Windows XP with Windows 7 I get an error "Local Area Connection" doesn't have a valid IP configuration.I have tried a lot of tutorials and answers on different forums but could not get the answer.
View 2 Replies View RelatedI recently bought a desktop off craigslist, it has been working fine for the past month, but I was about to start up a program and it froze. (was beginning to overheat, so it froze.) So no problem, I reset the computer and when I logged on, the internet had a fashionable yellow ! sign. So I diagnosed it and received the "Local Area Network does not have a valid IP configuration." Now every single computer, wired or not, can access the internet so it is specifically my desktop. I have done literally everything suggested in multiple forums, and nothing I do seems to work. I figure instead of listing everything I have done, I will just assume that I either did it wrong, or was given false information on how to do it, so in case one of those hold true I won't be stuck thinking something didn't work.
-Internet was working
-Computer froze
-Reset Computer
-Internet no longer working on my computer (does on other computers)
-Local Area Network does not have a valid IP configuration
I'm having trouble getting my laptop to connect to the Internet over wi-Fi. If I plug it directly into the router with a cable it works fine. I have 10 other things in my house that connect over wi-Fi just fine, my pc just won't connect.
View 14 Replies View RelatedI know this question seems to come out a lot but I can't seem to fix it. I am a college student and my internet has worked 100% fine until I went home this weekend and came back. It worked this weekend when I brought my computer home and when I came back today it gives me this error when I try to troubleshoot. The only thing that could have changed is when I went home I set my DNS to be openDNS because it makes a huge difference there, but I changed it back when I got here. I don't know if that would matter, but unplugging and restarting are doing nothing.
View 3 Replies View RelatedI am having this problem on my acer intel core i3 laptop I think my Network adapter is corrupt I cannot connect to my Netgear(home) router anymore... I use to be able to troubleshoot/diagnose and fix the error but now it doesn't fix it anymore.Wireless works though...the problem only occurs when I plug a network cable into the NIC... I have tried other network cables and the router at work but it gives me the same error.things I have tried to fix NIC that did not work
cmd- iprelease/renew
changing things in the registry
changing mac address
updating netgear firmware
updating NIC driver
uninstalling the bonjour service
I have tried putting the ip address...dns in manually?i am running on windows 7?
the same thing happened to me Thursday as well. All the laptops and my friends computer(same exact build as my own.) had been able to connect to the internet via wireless/ethernet. However my computer does not. For quite a while it would say the address doesn't have a valid IP, now it thinks there is nothing wrong... I had wiped and reinstalled windows 4 times in a sorry attempt to fix the issue. Also, I had checked the driver for my internet and reinstalled the latest version several times. I've exhausted all the resourses I can think of
View 1 Replies View RelatedI am an IT professional that is installing my first extended range wireless AP in my companies warehouse. I am very excited!
Now I have set up many a linksys and repeater wireless networks, so when I was looking into the Aironet 1240AG I thought ?No Problem!?
And at first, it is not!
I have the AP and antenna set up here in my office before I take it out and mount it in the warehouse. And I can get connected to it, no security for now, no filters, I just want to connect and make it work.
I stay connected for maybe 3 minutes, I can get to the internet, I can ping all my servers. Full connectivity. But then for no reason the connection fails and I cannot reconnect.
The error I get in the log is
Interface Dot11Radio0, Deauthenticating Station 0006.2510.bbe3 Reason: Previous authentication no longer valid
So strange! So I have reset the AP to factory defaults and then set the SSID, and I can connect, again for a second, then nothing.
I have tried with multiple wireless cards, even laptops. Thinking maybe the problem was on the computer side.
I'm using an ethernet cord to connect to my internet and it has been working well until Thursday morning when I turned on my laptop (Windows 8) to see a yellow triangle sign in the bottom right hand corner, in front of the ethernet connected symbol. Since then I haven't been able been able to access the internet from my computer. When I hover over it, it says that it is an "Unidentified network" and there is "No internet access". I've run the Windows 8 troubleshooting and it says that the problem found was ""Ethernet" doesn't have a valid IP configuration", but I'm unsure how to fix it.
I'm thinking that the problem is to do with my computer rather than my network, because I've tried another laptop (Windows 7) through the same ethernet cable and connection and the internet works fine on the other laptop. I've tried so many fixes that I've found online, with none of them actually working. Yesterday I even tried a full system reset, where I reinstalled Windows 8, repartitioned and wiped everything off the hard drive, but it still appears have the exact same problem.
Today I also purchased and tried a new ethernet cable which didn't work, so I then purchased a USB to Ethernet adapter, to make sure that it wasn't my ethernet port on my laptop that was faulty. That didn't work either, and the same problem still remains.
I have been having a lot of trouble getting my computer to connect to the internetIt is only one computer on the network that consistently has problems. It was working ok recently, except that I would have to turn the router off and back on fairly often, because the computer would say that the DNS lookup failed. Today it stopped working, and now says that the adapter does not have a valid ip configuration. I do not know what to do.
View 12 Replies View RelatedI am having a similar problem as others with the "wireless network connection does not have valid IP configuration" explanation. I have a Dlink DIR-655 wireless router and everything was working fine for a very long time, but yesterday the wireless stopped working. After trying a couple of things and having the same problem I reset the router and now I cannot get the wireless to work. When I run the Windows 7 network troubleshooter it comes up with the "wireless network connection does not have valid IP configuration" explanation, but I cannot figure out how to remedy this problem. I foolishly did not save the previous router configuration before resetting the router[CODE]
View 1 Replies View RelatedI've tried most solutions online that I can find with similar problems, but to no avail. I'm using Windows 7 (64 bit), by the way.
Here's a copy of my "ipconfig /all" :
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
[Code].....
I have been trying to "fix" this issue on my laptop for the past month, on and off. I have been using other sources to access the internet reading up on resolutions on this issue and all kinds of forums. I am knowledgeable, but not able to understand some of the fixes and terms that I have come across. I feel like I've tried everything and still I cannot access the internet on my PC wired or wireless.I have a Toshiba Satellite L505-GS5038. I tried to release & renew my ipconig.
View 12 Replies View RelatedI'm getting the problem: "Wireless Network Connection" doesn't have a valid IP configuration Recently I had to recover my Asus G73J laptop with Windows 7 and now it's having trouble getting internet access once it connects to the router. I am renting a basement suite and don't have access to the router upstairs (don't know what brand it is because I've never seen it before and they're on vacation right now so I can't even ask them to reset it or do anything right now). They are with Shaw Cable.
View 12 Replies View RelatedI am using an ethernet cable to connect my desktop to a Linksys router but I am getting the following message "Local Area Connection" doesn't have a valid ip configuration.I have connected to other routers so I do not believe that the card is at fault.So far I have tried the following:
Swapping ethernet cables
Connecting to router
connecting to modem
power cycling router/modem/computer
downloading new driver
[code]....
Randomly today my internet cut out I tried resetting the modem/powering it down etc nothing worked. I then tried the windows network diagnosis and it resulted in this issue "local area connection 2" doesn't have a valid ip configuration. I'm also directly connected to my modem if it matters. I never had this issue today. This issue keeps randomly occuring. I have a modem/router combo
Cisco DPC3825 DOCSIS 3.0 Gateway
I recently hooked my computer back up after moving and the Internet is not working. After going through the troubleshooting steps it gives the message local area connection does not have valid ip configuration. I have a net gear router and the wifi works fine on my phone and laptop.
View 1 Replies View RelatedI had my computer hooked up to the internet thru a wireless adapter and it broke so trying to hook it up thru a direct connection Ethernet cord into my router but its not working been giving me a couple answers to the problem one being that the local area connection doesn't have a valid up configuration and one other that hasn't popped up recently for me to write down but I've been searching all kinds of forums and trying all the usual problem fixers but I don't have a disk to reboot my operating system or anything and can't restore to previous settings cause the person I bought it from had it set to not make a back up recovery file I was thinking it might have something to do with the wireless adapter being installed but I can't find anywhere to uninstall that or change my settings off of a wireless adaptor situation... What should I do?
View 5 Replies View RelatedI have been facing the same problem with my wireless connection. I can connect to all the wireless connection except one, and it shows yellow exclamation mark in its icon.
View 19 Replies View Relatedi installed windows 7 on my desktop pc and every time i try and connect via wifi i get that error. only way i can surf the net is through ethernet what can i do to fix this issue
here is info from cmd
Code: Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Usersaceves>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : aceves-PC
Primary Dns Suffix . . . . . . . :
[code]....
A week ago this laptop was working fine. However, now it will not connect via wireless to the internet. It says that it connects to the router but not the internet. I can connect to the internet if I use the wired LAN connection. I tried a restore to two weeks ago (when it was working) and it did not solve the problem. I do see in the wireless network connection status that IPv4 connectivity = local and IPv6 connectivity = local. While on another laptop (that is working and connects to the same wireless router) the IPv4 = internet and IPv6 = no network access. I think this may be the issue, but am unable to find out how to change them.
OS = MS Vista Home SP2.
Windows 7 Connects to local network ok, but No Internet Access, i tried to reset dns, tcp/ip, but the same problem appear, but when I'm trying using modem, internet is working fine..i get the yellow triangle with exclamation point in the taskbar saying "No Internet Access". I've tried shutting off the firewall, setting the connection to public, etc. with no change. I've also gone through the Windows Network Diagnostic process and it says... "local Area Connection 2 doesn't have a valid IP Configuration"
View 11 Replies View RelatedI have the same problem in running win7 64 powerline adapters all 3 light green stable and getting "doesnt have a vaild IP config" error msg
Windows IP Configuration
Host Name . . . . . . . . . . . . : ****-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]...
Whenever I try to connect Windows XP with Windows 7 I get an error "Local Area Connection" doesn't have a valid IP configuration.
View 1 Replies View RelatedI have a laptop that use to connect to the internet fine, now it connects to the network, but won't connect to the internet
View 7 Replies View Relatedthis error is popping up when i'm trying to connect my pc to modem(cisco dpq2160) through cable..."Ethernet doesn't have valid ip configuration".. i have also tried some solutions given in other sites like ipconfig/reset in cmd. it says that there are no settings to reset..
View 1 Replies View RelatedI have an ethernet connection using a Powerline (TL-PA2010KIT), which I use for online gaming. It's been working perfectly, until today. For some reason, I can't connect - I get the little "Limited access" symbol,and no mentions of an actual connection.However, I have a wi-fi connection that works perfectly, besides fluctuations in connection sometimes, which makes it unacceptable for online gaming. I'm using a Virgin Media Superhub, so I assume that there's no problems there if the wi-fi works. Also, I'm using Windows 8 if that's any concern.
As for ipconfig:
Windows IP Configuration
Host Name . . . . . . . . . . . . : adam-pc
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
It's only occurred recently.
View 1 Replies View Related