Wireless Network Connection Doesn't Have Valid IP Configuration
Jan 3, 2013I have a laptop that use to connect to the internet fine, now it connects to the network, but won't connect to the internet
View 7 Replies
ADVERTISEMENT
Airlink N 150 Mini - Wireless Network Connection Doesn't Have A Valid IP Configuration
Dec 2, 2012I have a desktop PC using Windows 7 Pro. and a Airlink N 150 Mini USB wireless adapter. My 2Wire modem/router from AT&T was failing to stay connected and was replaced today with a Netgear 7550 modem/router from AT&T. I installed the Netgear 7550 and am able to access the internet with my Asus Laptop, my LG Thrill phone, and my Samsung Galaxy 2 tablet with no problems. However, my Desktop cannot connect to the internet and the Window Network diagnostics returned the following message: Network Connection doesn't have a valid IP configuration. How do I go about connecting my desktop to the Netgear modem/router so that I have access to the internet? By the way I am able to connect to the internet using an ethernet cable and a LAN connection.
View 1 Replies View RelatedTP-Link 300Mbps Wireless :: TL-WR940N - Network Connection Doesn't Have Valid IP Configuration
Mar 18, 2013Region : Poland
Model : TL-WR940N
Hardware Version : V2
Firmware Version :
ISP :
few days ago i changer my work etc . so i tried to connect to worknetwork wireless but it was connected for 10 minutes and then this message just appear "Wireless network connection doesn't have a valid IP configuration" there is also public network the same ,, connected for few minutes then when i connect again always the said limited access but with my home work is working perfectly but with work or public network always get this msg after few days searching in google nothing useful ps all computers in company are working perfectly with this wireless connection but my laptop no i have this message in router setting WAN port is unplugged,, check photo here [URL] router model TL-WR940N im useing win7 64 hp pavilion dv7 anti virus > deleted firewall state > off IP helper > disabled when i was connecting to public network this is result of Xirrus WI-FI inspector [URL]
Linksys Wireless Router :: WRK54G - Network Connection Doesn't Have Valid IP Configuration
Dec 2, 2010I have a new Windows 7 laptop which cannot connect to internet through my WRK54G Linksys router. Other laptops can connect through the same router, and the same laptop has connected through other routers. The laptop has it's TCP/IPv6 and TCP/IPv4 internet protocols set to get addresses automaticaly.
ipconfig shows that the IPv6 autoconfiguration address is 169.254.28.183 instead of 192.168.1.XXX. I tried the ipconfig/release and ipconfig/renew commands, as recommended by the knowledge base, but got the following error message: No operation can be performed on wireless network connection 2 while it has its media disconnected.
Wireless Connection / Doesn't Have A Valid IP Configuration
Jun 6, 2012I have been facing the same problem with my wireless connection. I can connect to all the wireless connection except one, and it shows yellow exclamation mark in its icon.
View 19 Replies View RelatedLinksys Wireless Router :: WRT160N Local Area Connection Doesn't Have Valid IP Configuration
Oct 11, 2012The last few days I had been getting the error that: "Local Area Connection doesn't have a valid IP configuration" whenever I reboot my computer. I have to power cycle the router before I can get back the internet connection. Checked on the web and tried various solutions which did not work. So I tried using various firmwares for the WRT160N V2 like V2.03 Build 7 and Build 9. Still did not work. Finally reverted back to my old and trusted FW2.02 Build 8. And this seemed to improve the situation. However, the error will still appear from time to time though not as frequently.
View 3 Replies View RelatedLinksys Wireless Router :: E4200 Local Area Connection Doesn't Have A Valid IP Configuration
Feb 14, 2012I am setting up a new E4200 modem, and have not been able to use the wired connection. The Windows 7 diagnositic on all three computers tells me "Local Area Connection, doesn't have a valid IP configuration."Model: E4200v1..I am using a new E4200 router, along with a new SE1500 5-port switch and a new SE2800 8-port switch.I am using a wired network that consists of two desktop computers, a laptop computer, a network printer, three Direct TV recorders, two Roku streaming video players, a BluRay player, and an XBox gaming console.Here is what I have done so far.
1- I can bypass the router to establish a direct wired connection to the cable modem. This works to access the internet. It establishes a new wired connection called Network 2.
2- I can access the internet using the wireless connection to the router. It shows a valid IPv4 address.
3- With all cables in place, all the lights are flashing on the router and on the computers.
4- I had changed cables and swapped cable ends.
5- Using the wireless connection, I can access the router home page (192.168.1.1). It shows valid IP addresses.
The problem is that my old Linksys BEFSR81 stopped working, with the same eror message for the LAN connection, "Local Area Connection, doesn't have a valid IP configuration."How often does the WAN port go bad? On both a five-year old BEFSR81, and a brand new E4200?
Local Area Connection 2 Doesn't Have A Valid IP Configuration
Feb 8, 2013Windows 7 Connects to local network ok, but No Internet Access, i tried to reset dns, tcp/ip, but the same problem appear, but when I'm trying using modem, internet is working fine..i get the yellow triangle with exclamation point in the taskbar saying "No Internet Access". I've tried shutting off the firewall, setting the connection to public, etc. with no change. I've also gone through the Windows Network Diagnostic process and it says... "local Area Connection 2 doesn't have a valid IP Configuration"
View 11 Replies View RelatedLocal Area Connection Doesn't Have Valid IP Configuration
Sep 20, 2011Whenever I try to connect Windows XP with Windows 7 I get an error "Local Area Connection" doesn't have a valid IP configuration.
View 1 Replies View RelatedLocal Area Connection Doesn't Have Valid IP Configuration?
Oct 27, 2011It's only occurred recently.
View 1 Replies View RelatedLocal Area Connection Doesn't Have A Valid IP Configuration - Windows 7?
Aug 1, 2012So I built a PC recently, using Powerline for Internet access. At first the PC wouldn't connect to the Internet so I moved the wireless router and the Powerline plug into another room and plugged them directly into the wall socket (previously they were plugged into an extension lead). I got Internet access on my PC, but 2 laptops and another PC were having trouble connecting to the Internet using Wi-FiWhen I moved the router and Powerline plug back to their original place, my PC wouldn't connect again (all other computers could) and I got the "Local Area Connection doesn't have a valid IP configuration" error from the network troubleshooting tool.So it's either I'm the only one that does get Internet when I move the router, or I'm the only one that doesn't get Internet when the router's in its normal place.[CODE]
View 3 Replies View RelatedNetworking - Local Area Connection Doesn't Have Valid IP Configuration
Mar 8, 2011The above problem has just occurred. I am networking a W7 computer to an Windows XP SP3 via a Cat 5 cable connection. Checks of all cables and NIC interfaces show that there ok. I can ping each NIC card and get a response. The NIC cards are configured for obtaining automatic addresses. My connection to the Internet via a Motorola Surfboard modem is ok. I have checked the drivers and they are ok.
View 4 Replies View RelatedBelkin F6D4050 V2 Adapter Connection Doesn't Have A Valid Ip Configuration
Apr 5, 2012After my last usb wireless adaptor went faulty after a few years of use I needed a new one for my home PC.Since I had never had problems with my previous Belkin adaptor I opted for another one. model number F6D4050 V2.I am having no luck at all connecting to my home network with my PC, the laptops and games consoles at home have no trouble at all. windows troubleshooter brings up the fault: 'wireless network connection 2' doesn't have a valid IP configuration.
View 10 Replies View RelatedWRT54GC Local Area Connection Doesn't Have A Valid IP Configuration
Jan 9, 2012I have a WRT54GC Router with 4 Windows 7 (all Home Verions)PCs.3 were running hard wire LAN, one notebook I was using wireless.I logged into the modem to change my security settings.I no sooner tried to save a password change, when the router locked up.I lost all internet connections. Did the normal reset modem, reset router, reboot, etc thing.Bottom line, I took out the router, and have just an 4 port switch connected to the modem.One desktop PC off of the switch still connects. On all other 3 PCS, I get the dreaded "Local Area Connection Doesn't Have a Valid IP Configuration."It's not a switch or cable problem. I connected my notebook via LAN to the same cable as the one PC that still connects, no luck.I've tried the ipconfig/release and renew, no luck. On the notebook, I even did a restore to a point about 3 weeks ago, no luck. Then today reinstalled the O/S.
View 3 Replies View RelatedLocal Area Connection (Wired) Doesn't Have Valid IP Configuration
Mar 10, 2013I live in student accommodation and the other day my wired connection to the port in my room suddenly stopped working and the error message in the thread title appeared in troubleshooting.
View 2 Replies View RelatedLocal Area Connection Doesn't Have A Valid IP Configuration Error
Aug 24, 2011I just got my internet hooked up in my new apartment yesterday, and it is not working when plugged directly into my laptop. It worked fine on the installer's laptop.A buddy of mine let me borrow his wireless rory to connect. I've tried disabling IPv6, restarting both the modem and my laptop, and updating the ethernet driver, which I could not find (HP dv2715nr is my model and I have windows 7 ultimate). elow is my ipconfig with the modem plugged in and the wireless turned off.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersAllan>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Allan-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code].....
Wireless Network Connection Doesn't Have A Valid Ip
Aug 21, 2012So i got a new dell inspiron 5520 laptop running windows 7 home premium edition, and i set it up and began using it with no problems. however, recently when i have tried to use it i have been unable to connect to the internet, and my novice troubleshooting attempts produce an error message saying 'wireless network connection doesn't have a valid ip'.
[code]...
Local Area Connection Doesn't Have A Valid IP Configuration (moved From Windows 7)
Feb 17, 2011I have a problem with a direct crossover Ethernet connection between two computers. One is a Win XP laptop, the other a Win 7 64 bit desktop. I have a USB adapter on the desktop and the laptop used that to share internet with the desktop. This setup worked fine until today. There have been no network hardware changes nor software changes but the desktop's power supply recently failed and had to be replaced. After that was done I tried today to plug the adapter and cord back in and use the connection but it will not work. The connection from the modem to the desktop works fine but the connection from desktop to laptop will not detect internet access, says "Local area connection doesn't have a valid IP configuration" and has limited connectivity. Other than a new power supply absolutely nothing has been changed.
View 7 Replies View RelatedWindows 7 Desktop - Local Area Connection Doesn't Have Valid IP Configuration
Oct 3, 2012Have a Windows 7 desktop connected to a Netgear Router via a cable modem. Computer network is setup a Home Network / Access Type: Internet. Error Message:"Local Area Connection" doesn't have a valid IP configuration. Problem is fixed but the problem starts again the next time I start the desktop. Receive the error message once again.
View 7 Replies View RelatedNetgear Wnr1000 V3 - Local Area Connection Doesn't Have Valid IP Configuration
Dec 19, 2011I have a Netgear wnr1000 v3 router. & At about 12:00pm central standard time. It kinda messed up.. This is the Problem.. I have seen this "Local Area Connection" Doesn't have a valid IP configuration. I've browsed and browsed and browsed.. Over and over trying every solution. It's gotten me so frustrated.. I don't want to return the router.. Nothing works for me.
View 2 Replies View RelatedPlaying Game - Local Area Connection Doesn't Have Valid IP Configuration
Jul 20, 2012I was just playing a game, hosting a server with Hamachi, when all of a sudden, I disconnect from the internet. The Windows diagnostic says what I posted in the title. I have tried multiple things to get this working, but nothing seems to work. I have tried ipconfig /release, then going in the settings and tricking the network into giving me a new IP then typing ipconfig /renew. And that didn't work. I have deleted the Bonjour thing out of my services.
View 3 Replies View RelatedLocal Area Connection Doesn't Have Valid IP Configuration - Stop 124 BSOD?
May 9, 2012I just did a fresh install of windows 7 x64 on a 2tb hd. the only drivers I have installed are the chipset, the onboard audio, usb 3.0, onboard HD GFX, marvell raid controller, and the intel management engine. The only other program installed is intel desktop utility. my onboard NIC is not working. i get an error saying the Local Area Connection doesn't have a valid IP configuration. I've tried setting the IP's and DNS addresses manually. I've tried disabling flow control. I've tried disabling IPV6. I've tried restarting the computer numerous times. The cable is fine, it was working yesterday. This also happened a couple days ago when I uninstalled my BigFoot 2100NIC, so I just said screw it and reinstalled it and internet worked great after that. I've tried pinging two adresses and it failed to ping 192.168.1.1 (the router address). I'm considering just installing the BigFoot I have right next to me, but i'm hesitant because the whole point of the clean OS install was to diagnose a stop 124 BSOD. I guess the question is would I rather have internets or GPU (the hardware I was planning on installing next), but its puzzling me why my onboard NIC is not working.
Here's my IPconfig/all. I've already reset ipv4,ipv6 and winsock through cmd with admin.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Erik-PC
Primary Dns Suffix . . . . . . . :
[Code].....
Netgear WGR614 Local Area Connection Doesn't Have A Valid IP Configuration
Jan 27, 2013I couldn't connect wirelessly to my NETGEAR router because of the "DNS server isn't responding" error.I then eventually made the rather dumb mistake of doing a factory reset, so now the router isn't even in range apparently Therefore I connected to the router with a wired connection and after a "Investigate router or broadband modem issues" error I eventually came to the error in the title.Currently I'm connected directly via my virgin modem with a wired connection, so this is my means of creating this thread.
Below is what i got from ipconfig /all using a wired connection to my router.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Userschenupan>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : CGPC
Primary Dns Suffix . . . . . . . :
[code]....
Telus Router - Local Area Connection Doesn't Have A Valid Ip Configuration
Jun 28, 2012"Local Area Connection doesn't have a valid IP configuration", and then we are disconnected from the internet. We both can get back on pretty quickly by using the troubleshoot option on our desktops network button on the taskbar, however we'd like to know how to completely eradicate the disconnects as we both game online. We are using a Telus router which we received around a month ago. My brother is connected wirelessly and I am hardwired in. We are both using Windows 7 with newer PC's (within the past year). Neither of us have a clue about networking so we are totally blanked on what settings to tweak to fix this issue, especially since it's not exclusively wireless or wired-in.
View 2 Replies View RelatedWireless Network Connection Doesn't Have A Valid IP Config
Nov 17, 2012Got randomly dc'd from my router today, tried reconnecting say that its an unidentified network and there's no internet connection; here's the IP config file
Windows IP Configuration
Host Name . . . . . . . . . . . . : CalumFirth-PC
Primary Dns Suffix . . . . . . . :
[Code].....
Local Area Network Doesn't Have A Valid Ip Configuration
May 5, 2013error: "local area network doesn't have a valid ip configuration"
Problem on another machine:
aCER aSPIRE w/ windows 7 Had internet previously; no changes made to machine EXCEPT swapped hardware internet connection from Links router to a temp set up on a laptop.Couldn't get laptop to connect via hardware - went wireless instead Upon return of cable to ASPIRE, got above error message. Running connection Wizard doesn't do it!
Lenovo B320 Desktop - Local Area Connection Doesn't Have Valid IP Configuration
Oct 31, 2012i have recently bought a lenovo all inone desktop
Model:lenovo b320 series
OS:windows 7 home basic
It has worked quiet well with internet connection for about a week.now from the last three days,network is not connecting even in lan and wireless connection I have tried the same lan connection with other desktop.It is working in that computer when troubleshooted,it is showing message as local area connection doesn't have valid ip configuration I have tried disabling the ip6 and only enabling ip4,but of no use when ping is run,it is showing as general failure?
Local Area Network Doesn't Have A Valid Ip Configuration Windows 7 32bit
Jul 30, 2012I am using hp pressario C7000 with window 7 32 bits. Can not access the internet. The reports 'local area network doesn't have a valid ip configuration'.
View 1 Replies View RelatedWireless Network Connection Does Not Have Valid IP Configuration?
Nov 1, 2012I am having a similar problem as others with the "wireless network connection does not have valid IP configuration" explanation. I have a Dlink DIR-655 wireless router and everything was working fine for a very long time, but yesterday the wireless stopped working. After trying a couple of things and having the same problem I reset the router and now I cannot get the wireless to work. When I run the Windows 7 network troubleshooter it comes up with the "wireless network connection does not have valid IP configuration" explanation, but I cannot figure out how to remedy this problem. I foolishly did not save the previous router configuration before resetting the router[CODE]
View 1 Replies View RelatedWireless Network Connection Not Have A Valid IP Configuration
Sep 7, 2011I have been trying to "fix" this issue on my laptop for the past month, on and off. I have been using other sources to access the internet reading up on resolutions on this issue and all kinds of forums. I am knowledgeable, but not able to understand some of the fixes and terms that I have come across. I feel like I've tried everything and still I cannot access the internet on my PC wired or wireless.I have a Toshiba Satellite L505-GS5038. I tried to release & renew my ipconig.
View 12 Replies View RelatedWireless Network Connection With No Valid IP Configuration
Nov 2, 2011I'm getting the problem: "Wireless Network Connection" doesn't have a valid IP configuration Recently I had to recover my Asus G73J laptop with Windows 7 and now it's having trouble getting internet access once it connects to the router. I am renting a basement suite and don't have access to the router upstairs (don't know what brand it is because I've never seen it before and they're on vacation right now so I can't even ask them to reset it or do anything right now). They are with Shaw Cable.
View 12 Replies View RelatedWireless Network Connection Does Not Have Valid Ip Configuration
Jul 19, 2011i installed windows 7 on my desktop pc and every time i try and connect via wifi i get that error. only way i can surf the net is through ethernet what can i do to fix this issue
here is info from cmd
Code: Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Usersaceves>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : aceves-PC
Primary Dns Suffix . . . . . . . :
[code]....
Losing Connection - Wireless Network Connection 2 Does Not Have A Valid IP Configuration?
Nov 15, 2012I have an Acer 7750G, running Windows 7,connected to our home network using a Dynex router. At the moment this is the only laptop in the house that is having problems with connectivity. Starting yesterday, it only connects intermittently. When I run diagnostics, it says the following problems have been fixed but it either solves the problem for a few minutes only or not at all: "Problem with wireless adapter or access point" or "Default gateway is not available".
IPV6 connectivity also shows 'no internet access' and sometimes IPV4 reports no internet. I've unplugged and rebooted the modem and router a few times but that hasn't solved the problem.
Edit: I ran troubleshoot again, and it says the following issue is not fixed: "Wireless Network Connection 2 does not have a valid IP configuration".