Losing Connection - Wireless Network Connection 2 Does Not Have A Valid IP Configuration?
Nov 15, 2012
I have an Acer 7750G, running Windows 7,connected to our home network using a Dynex router. At the moment this is the only laptop in the house that is having problems with connectivity. Starting yesterday, it only connects intermittently. When I run diagnostics, it says the following problems have been fixed but it either solves the problem for a few minutes only or not at all: "Problem with wireless adapter or access point" or "Default gateway is not available".
IPV6 connectivity also shows 'no internet access' and sometimes IPV4 reports no internet. I've unplugged and rebooted the modem and router a few times but that hasn't solved the problem.
Edit: I ran troubleshoot again, and it says the following issue is not fixed: "Wireless Network Connection 2 does not have a valid IP configuration".
View 14 Replies
ADVERTISEMENT
Nov 1, 2012
I am having a similar problem as others with the "wireless network connection does not have valid IP configuration" explanation. I have a Dlink DIR-655 wireless router and everything was working fine for a very long time, but yesterday the wireless stopped working. After trying a couple of things and having the same problem I reset the router and now I cannot get the wireless to work. When I run the Windows 7 network troubleshooter it comes up with the "wireless network connection does not have valid IP configuration" explanation, but I cannot figure out how to remedy this problem. I foolishly did not save the previous router configuration before resetting the router[CODE]
View 1 Replies
View Related
Sep 7, 2011
I have been trying to "fix" this issue on my laptop for the past month, on and off. I have been using other sources to access the internet reading up on resolutions on this issue and all kinds of forums. I am knowledgeable, but not able to understand some of the fixes and terms that I have come across. I feel like I've tried everything and still I cannot access the internet on my PC wired or wireless.I have a Toshiba Satellite L505-GS5038. I tried to release & renew my ipconig.
View 12 Replies
View Related
Nov 2, 2011
I'm getting the problem: "Wireless Network Connection" doesn't have a valid IP configuration Recently I had to recover my Asus G73J laptop with Windows 7 and now it's having trouble getting internet access once it connects to the router. I am renting a basement suite and don't have access to the router upstairs (don't know what brand it is because I've never seen it before and they're on vacation right now so I can't even ask them to reset it or do anything right now). They are with Shaw Cable.
View 12 Replies
View Related
Jul 19, 2011
i installed windows 7 on my desktop pc and every time i try and connect via wifi i get that error. only way i can surf the net is through ethernet what can i do to fix this issue
here is info from cmd
Code: Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Usersaceves>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : aceves-PC
Primary Dns Suffix . . . . . . . :
[code]....
View 5 Replies
View Related
Jan 3, 2013
I have a laptop that use to connect to the internet fine, now it connects to the network, but won't connect to the internet
View 7 Replies
View Related
Dec 2, 2012
I have a desktop PC using Windows 7 Pro. and a Airlink N 150 Mini USB wireless adapter. My 2Wire modem/router from AT&T was failing to stay connected and was replaced today with a Netgear 7550 modem/router from AT&T. I installed the Netgear 7550 and am able to access the internet with my Asus Laptop, my LG Thrill phone, and my Samsung Galaxy 2 tablet with no problems. However, my Desktop cannot connect to the internet and the Window Network diagnostics returned the following message: Network Connection doesn't have a valid IP configuration. How do I go about connecting my desktop to the Netgear modem/router so that I have access to the internet? By the way I am able to connect to the internet using an ethernet cable and a LAN connection.
View 1 Replies
View Related
Mar 18, 2013
Region : Poland
Model : TL-WR940N
Hardware Version : V2
Firmware Version :
ISP :
few days ago i changer my work etc . so i tried to connect to worknetwork wireless but it was connected for 10 minutes and then this message just appear "Wireless network connection doesn't have a valid IP configuration" there is also public network the same ,, connected for few minutes then when i connect again always the said limited access but with my home work is working perfectly but with work or public network always get this msg after few days searching in google nothing useful ps all computers in company are working perfectly with this wireless connection but my laptop no i have this message in router setting WAN port is unplugged,, check photo here [URL] router model TL-WR940N im useing win7 64 hp pavilion dv7 anti virus > deleted firewall state > off IP helper > disabled when i was connecting to public network this is result of Xirrus WI-FI inspector [URL]
View 1 Replies
View Related
Dec 2, 2010
I have a new Windows 7 laptop which cannot connect to internet through my WRK54G Linksys router. Other laptops can connect through the same router, and the same laptop has connected through other routers. The laptop has it's TCP/IPv6 and TCP/IPv4 internet protocols set to get addresses automaticaly.
ipconfig shows that the IPv6 autoconfiguration address is 169.254.28.183 instead of 192.168.1.XXX. I tried the ipconfig/release and ipconfig/renew commands, as recommended by the knowledge base, but got the following error message: No operation can be performed on wireless network connection 2 while it has its media disconnected.
View 9 Replies
View Related
Jun 6, 2012
I have been facing the same problem with my wireless connection. I can connect to all the wireless connection except one, and it shows yellow exclamation mark in its icon.
View 19 Replies
View Related
Sep 19, 2012
My company just assumed management of a remote entity. The network has several misconfigurations and I need to make some network modifications from my office w/o losing access or incurring lengthy outage to the clients. The network consists of 1721 router and three 2960 switches.
- I only have access to the router from the Internet. I telnet off the router to the 3 switches.
The site uses a single class C 192.168.1.0 / 24. The router is running RIPv2 even though this is the only network. The prior network person (contractor) set up separate native vlans on each switch and all the ports are defined as Native trunk and access are defined to the VLAN interface assigned to the switch. So of course the logs are flooded with Native VLAN mismatch, Each 2960 switch is a VTP server but has no VTP domain.
basic network layout:
Internet => Eth [Cisco 1721] => Fa 0 192.168.1.254 ==> [SW1]
[SW1]
interface Vlan1
no ip address
no ip route-cache!interface Vlan220ip address 192.168.1.219 255.255.255.0no ip route-cache
[code]....
!interface GigabitEthernet0/1description SW2 Gi0/1switchport access vlan 204switchport trunk native vlan 204!interface GigabitEthernet0/2switchport access vlan 204switchport trunk native vlan 204!interface Vlan1no ip addressno ip route-cache!interface Vlan204ip address 192.168.1.224 255.255.255.0no ip route-cache Normally, I would assign the current 192.168.1.254 to a subinterface to Router Fe 0/0 but with each switch having its own native VLAN I am afraid I will lose connectivity to the downstream switches -- my only access is telnet off the Cisco1721 Router.
View 3 Replies
View Related
Oct 11, 2012
The last few days I had been getting the error that: "Local Area Connection doesn't have a valid IP configuration" whenever I reboot my computer. I have to power cycle the router before I can get back the internet connection. Checked on the web and tried various solutions which did not work. So I tried using various firmwares for the WRT160N V2 like V2.03 Build 7 and Build 9. Still did not work. Finally reverted back to my old and trusted FW2.02 Build 8. And this seemed to improve the situation. However, the error will still appear from time to time though not as frequently.
View 3 Replies
View Related
Feb 14, 2012
I am setting up a new E4200 modem, and have not been able to use the wired connection. The Windows 7 diagnositic on all three computers tells me "Local Area Connection, doesn't have a valid IP configuration."Model: E4200v1..I am using a new E4200 router, along with a new SE1500 5-port switch and a new SE2800 8-port switch.I am using a wired network that consists of two desktop computers, a laptop computer, a network printer, three Direct TV recorders, two Roku streaming video players, a BluRay player, and an XBox gaming console.Here is what I have done so far.
1- I can bypass the router to establish a direct wired connection to the cable modem. This works to access the internet. It establishes a new wired connection called Network 2.
2- I can access the internet using the wireless connection to the router. It shows a valid IPv4 address.
3- With all cables in place, all the lights are flashing on the router and on the computers.
4- I had changed cables and swapped cable ends.
5- Using the wireless connection, I can access the router home page (192.168.1.1). It shows valid IP addresses.
The problem is that my old Linksys BEFSR81 stopped working, with the same eror message for the LAN connection, "Local Area Connection, doesn't have a valid IP configuration."How often does the WAN port go bad? On both a five-year old BEFSR81, and a brand new E4200?
View 7 Replies
View Related
Aug 21, 2012
I have a WRT54G router anf DSL modem. My router keeps losing connection, wired and wireless (My connection is not visible on any laptop). I tried briged mode on the modem and I tried the configuration CD. Everything works for some months or weeks. Sometimes the CD setup asks me for manual configuration. I am using modem to desktop connection?
View 2 Replies
View Related
Sep 29, 2012
I've tried most solutions online that I can find with similar problems, but to no avail. I'm using Windows 7 (64 bit), by the way.
Here's a copy of my "ipconfig /all" :
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
[Code].....
View 16 Replies
View Related
Sep 1, 2011
I am using an ethernet cable to connect my desktop to a Linksys router but I am getting the following message "Local Area Connection" doesn't have a valid ip configuration.I have connected to other routers so I do not believe that the card is at fault.So far I have tried the following:
Swapping ethernet cables
Connecting to router
connecting to modem
power cycling router/modem/computer
downloading new driver
[code]....
View 19 Replies
View Related
Oct 1, 2012
I recently hooked my computer back up after moving and the Internet is not working. After going through the troubleshooting steps it gives the message local area connection does not have valid ip configuration. I have a net gear router and the wifi works fine on my phone and laptop.
View 1 Replies
View Related
Mar 12, 2012
I had my computer hooked up to the internet thru a wireless adapter and it broke so trying to hook it up thru a direct connection Ethernet cord into my router but its not working been giving me a couple answers to the problem one being that the local area connection doesn't have a valid up configuration and one other that hasn't popped up recently for me to write down but I've been searching all kinds of forums and trying all the usual problem fixers but I don't have a disk to reboot my operating system or anything and can't restore to previous settings cause the person I bought it from had it set to not make a back up recovery file I was thinking it might have something to do with the wireless adapter being installed but I can't find anywhere to uninstall that or change my settings off of a wireless adaptor situation... What should I do?
View 5 Replies
View Related
Feb 8, 2013
Windows 7 Connects to local network ok, but No Internet Access, i tried to reset dns, tcp/ip, but the same problem appear, but when I'm trying using modem, internet is working fine..i get the yellow triangle with exclamation point in the taskbar saying "No Internet Access". I've tried shutting off the firewall, setting the connection to public, etc. with no change. I've also gone through the Windows Network Diagnostic process and it says... "local Area Connection 2 doesn't have a valid IP Configuration"
View 11 Replies
View Related
Sep 20, 2011
Whenever I try to connect Windows XP with Windows 7 I get an error "Local Area Connection" doesn't have a valid IP configuration.
View 1 Replies
View Related
Oct 27, 2011
It's only occurred recently.
View 1 Replies
View Related
Aug 1, 2012
So I built a PC recently, using Powerline for Internet access. At first the PC wouldn't connect to the Internet so I moved the wireless router and the Powerline plug into another room and plugged them directly into the wall socket (previously they were plugged into an extension lead). I got Internet access on my PC, but 2 laptops and another PC were having trouble connecting to the Internet using Wi-FiWhen I moved the router and Powerline plug back to their original place, my PC wouldn't connect again (all other computers could) and I got the "Local Area Connection doesn't have a valid IP configuration" error from the network troubleshooting tool.So it's either I'm the only one that does get Internet when I move the router, or I'm the only one that doesn't get Internet when the router's in its normal place.[CODE]
View 3 Replies
View Related
Mar 8, 2011
The above problem has just occurred. I am networking a W7 computer to an Windows XP SP3 via a Cat 5 cable connection. Checks of all cables and NIC interfaces show that there ok. I can ping each NIC card and get a response. The NIC cards are configured for obtaining automatic addresses. My connection to the Internet via a Motorola Surfboard modem is ok. I have checked the drivers and they are ok.
View 4 Replies
View Related
Apr 5, 2012
After my last usb wireless adaptor went faulty after a few years of use I needed a new one for my home PC.Since I had never had problems with my previous Belkin adaptor I opted for another one. model number F6D4050 V2.I am having no luck at all connecting to my home network with my PC, the laptops and games consoles at home have no trouble at all. windows troubleshooter brings up the fault: 'wireless network connection 2' doesn't have a valid IP configuration.
View 10 Replies
View Related
Mar 1, 2012
This is the message I get when diagnosing my hardwire connection to the internet. I just got this computer yesterday and it worked find. I allowed it to implement all the windows updates during the afternoon. I don't recall if the hardwired connection stopped working after all the updates occurred. Today, when I started up the computer, there is no hard wire internet connection. The computer has a wireless connection option and fortunately that works. I called tech support and they said they would just send me a refund, thinking it's the network card. But, the tech seemed not to have much knowledge or interest in trying to fix the problem. I uninstalled the adapter in device manager and let it reinstall itself. It says its working properly.
PS Computer is a Gateway SX2803 desktop with Windows Home 7 Premium
View 10 Replies
View Related
Jan 9, 2012
I have a WRT54GC Router with 4 Windows 7 (all Home Verions)PCs.3 were running hard wire LAN, one notebook I was using wireless.I logged into the modem to change my security settings.I no sooner tried to save a password change, when the router locked up.I lost all internet connections. Did the normal reset modem, reset router, reboot, etc thing.Bottom line, I took out the router, and have just an 4 port switch connected to the modem.One desktop PC off of the switch still connects. On all other 3 PCS, I get the dreaded "Local Area Connection Doesn't Have a Valid IP Configuration."It's not a switch or cable problem. I connected my notebook via LAN to the same cable as the one PC that still connects, no luck.I've tried the ipconfig/release and renew, no luck. On the notebook, I even did a restore to a point about 3 weeks ago, no luck. Then today reinstalled the O/S.
View 3 Replies
View Related
Mar 10, 2013
I live in student accommodation and the other day my wired connection to the port in my room suddenly stopped working and the error message in the thread title appeared in troubleshooting.
View 2 Replies
View Related
Aug 24, 2011
I just got my internet hooked up in my new apartment yesterday, and it is not working when plugged directly into my laptop. It worked fine on the installer's laptop.A buddy of mine let me borrow his wireless rory to connect. I've tried disabling IPv6, restarting both the modem and my laptop, and updating the ethernet driver, which I could not find (HP dv2715nr is my model and I have windows 7 ultimate). elow is my ipconfig with the modem plugged in and the wireless turned off.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersAllan>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Allan-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code].....
View 6 Replies
View Related
Aug 21, 2012
So i got a new dell inspiron 5520 laptop running windows 7 home premium edition, and i set it up and began using it with no problems. however, recently when i have tried to use it i have been unable to connect to the internet, and my novice troubleshooting attempts produce an error message saying 'wireless network connection doesn't have a valid ip'.
[code]...
View 1 Replies
View Related
Dec 29, 2011
I am currently experiencing difficulties setting up a Netgear router (WNR834B). The router I had been using previously allowed me to access the internet, but frequently dropped the connection, especially when I connected to it via my laptop. I have the new router set up correctly (I even get a signal from it) but both the desktop computer I set it up through and my laptop cannot access the internet. When I diagnose the connection issue I get the message "The network adapter "Local Area Connection" does not have a valid IP configuration."
View 14 Replies
View Related
Feb 17, 2011
I have a problem with a direct crossover Ethernet connection between two computers. One is a Win XP laptop, the other a Win 7 64 bit desktop. I have a USB adapter on the desktop and the laptop used that to share internet with the desktop. This setup worked fine until today. There have been no network hardware changes nor software changes but the desktop's power supply recently failed and had to be replaced. After that was done I tried today to plug the adapter and cord back in and use the connection but it will not work. The connection from the modem to the desktop works fine but the connection from desktop to laptop will not detect internet access, says "Local area connection doesn't have a valid IP configuration" and has limited connectivity. Other than a new power supply absolutely nothing has been changed.
View 7 Replies
View Related
Oct 3, 2012
Have a Windows 7 desktop connected to a Netgear Router via a cable modem. Computer network is setup a Home Network / Access Type: Internet. Error Message:"Local Area Connection" doesn't have a valid IP configuration. Problem is fixed but the problem starts again the next time I start the desktop. Receive the error message once again.
View 7 Replies
View Related
Dec 19, 2011
I have a Netgear wnr1000 v3 router. & At about 12:00pm central standard time. It kinda messed up.. This is the Problem.. I have seen this "Local Area Connection" Doesn't have a valid IP configuration. I've browsed and browsed and browsed.. Over and over trying every solution. It's gotten me so frustrated.. I don't want to return the router.. Nothing works for me.
View 2 Replies
View Related
