Upon turning on the computer, the wireless will not connect. It seems to not recognize the configuration of the wireless. I have to go in and put in the key every time... and then there are times that it says "limited or no connectivity". We just had a new router/modem installed in our network just yesterday. This router/modem is in conjunction with cable tv difficulties we were having.
View 3 Repliesthere has been issues with this router, and I wonder if any of you have issues connecting to the 5ghz when you wake your pc from sleep longer than an hour. For some reason when I put my computer to sleep at night and wake it up in the morning, my computer will not connect to 5ghz. It will work fine with 2.4, both are set in auto, so I dont see any issues. I did try to put 5ghz to a manual setting; wpa2, 40 mhz, and channel 161. I still get the same results. I am doing something wrong or is the router's 5ghz faulty?Also when is the new firmware coming, I am getting sick of my Harddrive being awake 24/7, its killing the harddrives life span and wasting electricity. I should put this in another post, because they should really change the media server to Wild Media Server or Serviio it would be alot better.
View 7 Replies View RelatedI have a laptop with windosw 7 and every time I try to turn on the wlan it causes all computers from the wireless to lose internet
View 5 Replies View RelatedIf I have anything else connected to the network (anything being my Xbox 360, or my smartphone) and I turn on/wake up my computer, the entire network crashes and I have to power cycle the router and modem in order to get it to work again. What would even cause this? I often forget to turn off the wifi on my smartphone before I turn on the computer, which results in a lot of very tedious power cycling. It's also frustrating if I'm playing some vidya on the 360 and my wife gets on the computer, resulting in me getting kicked off and her unable to even do what she wanted to do in the first place.
The stranger part is that if I have my computer already on, and I turn on the 360/smartphone, it works fine. So there's something going wrong in the process of my computer connecting to the network, I guess. I have set a static IP, and I also made sure to turn off the energy saving feature of my wifi card, but neither of those things solved the problem.
My NIC card started flashing last night. The computer was turn off, and the network cable to the cable modem was unplugged. Also, I installed some free software that day and wonder if there is a connection.
View 5 Replies View RelatedMy new computer won't connect with the internet until my older computer is turned on. My phone is the same way when going Wi-Fi.
View 5 Replies View Relatedthis happens 90% of the time ive try upluging before boot and plugging it in when its booted up but i still have to restart the network
View 2 Replies View RelatedI am having quite a large problem with my TalkTalk connection. Whenever i turn off my computer, internet access stops for the entire network, anyone who is conencted, however, local access is still possible.I am also having a problem with the wireless in my laptop also. Whereas every computer on my network is able to access the router wirelessly, my computer (the one that seems to chut down internet access) won't do that, i send packets, but none are received.
View 2 Replies View RelatedI have Comcast cable going through a Netgear wireless router (WNR1000V2) with 2 PC's connected to it. (both desktops are wired directly to the router)When ever my computer is on and I game, I get a steady low latency ping, usually <50ms.But when my roommate turns on his PC, every 5-6 seconds or so I get a surge upto ~250ms.I disconnected the ethernet cable from his PC while I was gaming and the surging stopped and I had a very smooth connection. But as soon as I plugged it back up I started getting horrible ping. This leads me to believe that some program on his PC is interrupting the internet latency.
I am completely lost on how to track down what is sapping my internet. His PC is not running any bit torrent clients or P2P programs at all.We both are on a 2 month old copy of win7 x64.Are there any programs that I can use that would tell me what is using the internet to the point of lagging the whole network?
I pay for a 50mb service and reguarly check the download speed I was getting. I would always get between 45-50mb. However I went on holiday for a few days, and so I turned all the plugs off at the wall(something I never do) and since I got home im getting speed of around 20-25mb. I called the engineer out but he wasnt able to do anything because when he connected it to his laptop, he was getting speeds of 47mb. He said he didnt know why i was getting such a slow speed through my desktop, just said it must have something to do with my computer.
View 1 Replies View RelatedI set up my Linksys wireless router BEFW11S4 with a password protection to prevent access from unauthorized users, now I can only access my internet connection from one computer at a time not simultaneously like before I introduced the password. I must have missed to turn on a switch somewhere in the set up
View 2 Replies View RelatedHad laptop connecting wirelessly perfect with no problems. We then added another laptop and PSP 3 to the house hold. Any of the 3 devices will connect to the internet via wireless but ONLY one at a time. If you are connected with one and turn on one of the others it will kick the one off that you were on and only 1 device can use wireless at a time?
View 4 Replies View RelatedI haven't really allowed this to bug me too much, but I went over by a friend's house, used his WiFi, closed my Laptop, it disconnected, I reconnected to his network, came back home, now every time I restart or Shutdown my computer I have to reconnect, not that big of a deal
View 5 Replies View RelatedI have a Cisco WRT120N Router and a Cisco Valet AM10 wireless adapter. Almost every time the computer reboots, I loose my network and I have to redo the AM10 setup. The AM10 is the only device that loses the connection, my lap top and printer do not lose the connection.
Problem 2: Everytime I upplug and replug the AM10 a window pops up saying I need to check the drive for errors but none
are found.
Problem 3: I downloaded the AM10 install program, Downloadable.Setup.AM10.1.2.10148.2. It does not work. If I try to run it Iget an error message that the setup canot be completed and to call in for support.
Problem 4: When I can get it working is shows that it is Wireless Connection 5. Why 5 and not 1? Where are the other 4?
<script id="overlay_tmpl" type="text/html">// <div id="<%= overlayId %>" class="_mp3rocket_overlay_style" style="left: <%= overlayLeft %>; top: <%= overlayTop %>; width: <%= overlayWidth %>; height: <%= overlayHeight %>"></div> // </script>
I have a Netgear N150 Wireless ADSL2+ Modem Router(DGN1000) which i need to connect for wireless access..My internet connection is a wireless one(antenna connected on roof) connection available to only one computer with an RJ45 LAN.Is it possible for me to connect the router to this LAN cable and get internet on more than one computer at a time?? I have the following information
IP :
Subnet :
Default Gateway :
Primary DNS :
Secondary DNS :
MAC of the Registered Computer :
I recently switched my connection from DSL to Cable and Linksys is telling me that I need to reconfigure my router, but they want to charge me for the tech support.
View 7 Replies View Relatedi moved houses and am trying to reconfigure my netgear wireless router, instead of using my apple hotpot?
View 1 Replies View RelatedI have been set out to pasture by the Linksys support staff as I have passed my 90 free tech asstistance period. I had a power outage and now I have a solid Cisco light on the top of the router but I can not get any port light activity on the router. I don't see how I can reconfigure it if the system can not even access it?
View 9 Replies View RelatedI have a computer & Bluray..should I use router to be able to use bothe at same time?I have a single port dsl line..or should I get a mulit port "modem/router"?
View 1 Replies View RelatedI need to clear the old DSL settings out of my E2000 router to switch to my new cable provider.
View 2 Replies View RelatedMy router worked fine. Comcast did updates and now it wont work. If I connect the cable modem to the laptop the internet works fine.It's the router. She said I need to reconfigure it. I tried looking on the site, typing in the 192.168.1.1 thing and the password "admin" is not correct.
My cable modem is Motorola SB5120. My linksys is WRT54G2 V1. how to reconfigure this to work! We work from home and this is a huge obstacle for us to not have wireless internet
I looked around the messages, but could not find anything on this topic. I need assistance with the CISCO WRT54G2 V1. I have an EnGenius EOC5611P (500mW) Repeater set up in my RV and it connects directly to the PC inside my RV using, a CAT 5 connection. I am now using a laptop and would like to connect to the EOC5611P using wireless. "Can I re-configure the WRT54G2 to connect the 5611?" (I would plug the router directly into the 5611). According to EnGenius support, it is possible, but the router would have to be re-configured, but they do not support this setup. I would purchase an EnGenius EAO 7530 which would work perfectly, but the price is $245. Here is the link to the 5611 information [URL]
View 3 Replies View RelatedFirst I tried restricting all computers from accessing the internet from 11:00PM to 6:00 through access control. I enabled it and set up the schedule but it does not cut off the internet. I went through create a new schedule and did that but again it still connects. Then, in access control, I selected always and put in my son's IP address and created a schedule for him but it won't allow him any internet access.
View 2 Replies View RelatedUsing RV042 router,have an office with 4 computers XP PRO SP3 and only 2 need to use the VPN connection.problem is each one will connect just fine BUT when one is connected the other will not connect untill the other is disconnected.have another office with very similar setup (same quickvpn client) (same router)and i have 2 computers connecting at same time just fine.have checked all i can think of.
View 2 Replies View RelatedI am using an EA4500 with the latest firmware that support the Cisco Connect Cloud. I am connected to the Internet and I need to edit the Internet settings and select a different internet setting: Static IP from the current setting DHCP. I select the option from a drop-down menu after selecting Edit, but there is no edit and no drop-down menu.
View 9 Replies View RelatedI'm using a Lenovo Y 560 using a wireless connection to an Apple Airport extreme. I have been using this set up for a few months without any problems. However, recently, my computer has been disconnecting at random time for 30-60 seconds. There isn't any lag before or after and this occurs when gaming or browsing. The weird thing is, there are about 15 other PCs and Macs using the airport and none of them are experiencing this problem. I used my 'one key recovery' button and restored my computer to the factory default and updated/reinstalled all wireless drivers and the problem still persists. At this point I'm stumped, any suggestions?
View 7 Replies View RelatedI'm trying to hook up a D Link 150 601 router to my time warner w/road runner computer but it won;t on DHCP I'm lost as what to do.
View 1 Replies View RelatedI have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies View RelatedI just bought a WAP321 Wireless AP. I wonder why it cannot sync with our time server automatically. Every time I reboot it, the system time become "Fri Dec 31 1999 12:00:00 UCT". I have to do the sync manually by clicking on the "Save" button under the menu Administration > Time Setting.
View 5 Replies View RelatedAI have a Dir-825 router. The 5GHz is turned off and the wirless is on G/N. I have shawcable for my isp and my firmware is 2.06 and its a Rev B Router. I also have Qos Engine on for allowing me to have 2 xboxes on Open NAT.problem is my wireless signal for some wired reason is VERY weak. A while ago it used to work really far way outside. It was around 150ft distance at 4 bars. Now for some reason I can't even go upstairs without getting a 1 or 2 bar signal.
View 3 Replies View Relatedi have had my dir-655 one year now, have never had wireless problems with it until now.my notebook's internet gets very slow somedays, i just restart my router and then internet speed works normally.i have:
Hardware Version: A4 - Firmware Version: 1.32EU
bought a home 3 weeks ago where there was already a linkysys router ewhen got internet hooked up they did using that already exsisting router. internet been workinhg fine till yesterday modem thru cable working good and right lights on linksys router working. but cant connect to the internetcalled linksys and said warranty up on this router and they want me to pay for continued phone supopoert for 30-50 dollars really.
View 1 Replies View RelatedMy HP laptop (Windows Vista, 4-5 five years old) has started to malfunction. I cannot connect to the router attached to my PC. The message tells me that the wireless capability is turned off. It says "Turn on wireless capability - this can be done by using as switch which can usually be found on side of computer or a function key combination." I can find no switch on my laptop, and don't know how which function key combination to press.
View 3 Replies View Related