I hav two different internet connections by different service providers,one is LAN and other is WIRELESS.whn i turn off the WI-FI button n put the lan connection thn it shows connected but pages dnt open and a reload message comes and thn i unplug LAN n turn on the WI-FI conctn thn i m able to connect and surf.so, i m only able to use the wireless one..
View 2 RepliesI'd like to use 2 internet connections at the same time.Assuming there are two internet networks.Network A and Network B (both are either wireless OR one is wireless and one is wired OR both are wireless). So, now I want to use BOTH internet connections simultaneously. However, both connections will still be separate and not combined:If I had to transfer big files, then I could do this on network A.Now, I want to use network B for other "normal" internet use so that the transfer of files in network A gets the maximum speed since there is no interference with anything else.I have to let the computer know somehow that there are two connections used simultaneously. I also have to setup what programs use what connection. E.g., IE uses network a and Firefox uses network b, program "x" also uses network b, etc.I would use two network card/USB Wifi Adapers so that each network card/wifi adapter can connect to one network.how do you realize that without setting a Virtual Machine up?
View 9 Replies View RelatedI have laptop with windows 7 ultimate.i have two internet connection avalable...
1> wifi network of my office...which is protected by cyberom..so i cant open facebook and other restricted sites
2> internet through my android mobile...which is dialup connection or through usb tethering
i want to use office wifi for downloading via idm or other download manager and my mobile internet for social networking..or any idea i allow application to connect internet via perticuler network/way..
How to connect two or more internet connections at same time to increase internet speed ?
View 1 Replies View RelatedIt is usually by a router or install a third party software without anyone saying if it works or not.
I have two connections at home. One is a Wifi ( public wifi for my village) that i use for my phone and the other one is a wired dsl. I have used both but not on the same time. I tried connecting them both ( phone have tethering) but I think they are interfering with each other making me lose connection. I am using vista home.
I have seen the merge connections( in network and sharing center) and i have seen this one [URL].. but I am a little bit wary of changing my registry.
can i get better speed by using two wifi adapters at the same time
View 2 Replies View RelatedI have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies View RelatedWhen we got broadband through our cable provider (Comcast), we were sold a single user license even though we were explicitly connecting two computers.Upgrading to a multi-user subscription (for up to 5 connections) solved that.I'm currently trying to configure 4 computers to connect. I have noticed that if a configuration for one has WPA and another has WPA-2 they will bump.This may be true for differences in WEP-keys, TKIP setting, etc. If you do new configurations, the settings may revert each time to a default, which you may not notice.Keeping the network settings matched may work. Using a portable memory device to run a saved configuration on each machine can improve their synchronization.
View 1 Replies View RelatedMy kid is heading off to college with a Toshiba Satellite E-205 laptop and a Kodak ESP Office 2150 printer. She would like to use the wireless printer option on the Kodak, which requires a wireless router. I have a D-Link DIR-655 wireless router that I can send with her.
I know her university has a very robust wireless system for Internet access, so she is going to want to use their wireless access.
So, the DIR-655 sole use will be to allow access to the printer. It will not be accessing the Internet or be cabled into the university's network.
Is it possible to operate TWO wireless connections at the same time so she can hit her university wireless and the DIR-655 so she can print wirelessly?
how do I configure the laptop and the DIR-655 to allow this kind of access?
I have two wireless connections at home from 2 different ISPs. How can make my laptop connect to both routers at the same time to make use of them?
View 1 Replies View RelatedHow many VPN connections the ASA5540 can provide at the same time?
View 2 Replies View RelatedAny input on this: We had a DMZ server that customers used to get to their information. This sever was the front end to get to the host that holds the customer information. The server was in a DMZ, the path from Server to host was: through DMZ switch, through firewall to 6509 switch to the host. We never had a problem with this, the server application was old but worked great.
We have since moved to having someone host the front end. The front end connects via Internet to their third party router, to the same DMZ switch through same firewall, to same 6509 to host. The third party router is configured with VPN tunnel to remote end. Connection comes through Internet to their router and is Na Ted then goes to DMZ, to host.
Internet---E1 (Router NAT) E0 ---ASA---6509---Host
We have had nothing but trouble with this connection. Customers are complaining because the connections time out so much. We see a lot of tcp resets on the host to the Router NAT ip address (which is the DMZ side interface). The resets usually show "Invalid Query Header Length". The current connection is capped at 1Mbps, with average response times of 50ms (spikes to 200).
They keep telling us that something is wrong with the host, but I have to believe the latency is causing us problems. I can see that bandwidth seems to be enough as I do not see the interfaces utilizing that much, averages about 300K. I was wondering could the IOS NAT be contributing to the problem as well?
Had laptop connecting wirelessly perfect with no problems. We then added another laptop and PSP 3 to the house hold. Any of the 3 devices will connect to the internet via wireless but ONLY one at a time. If you are connected with one and turn on one of the others it will kick the one off that you were on and only 1 device can use wireless at a time?
View 4 Replies View RelatedI haven't really allowed this to bug me too much, but I went over by a friend's house, used his WiFi, closed my Laptop, it disconnected, I reconnected to his network, came back home, now every time I restart or Shutdown my computer I have to reconnect, not that big of a deal
View 5 Replies View RelatedRegion : Canada
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Bell
I'm having to reboot what is now my 2nd router every 1-2 days in order for all connections to resume working. My 2nd router was working great since Saturday afternoon, and just now I needed to reboot in order for my laptop to connect to the network.Now that it seems pretty clear the router in general isn't faulty, I suspected that the issue was IP lease related, so I was looking at DHCP settings and changed the lease time to 2880 (max setting), from 120 (default). However, this should only prolong how often i'll need to reboot the router. So, what is it that's causing my devices to disconnect or not being able to connect to the router for a prolonged period of time?
I have Cisco 871 router with 12.3. OS version.
1. I'm interested if it's possible to block certain contetn only at certain time ? e.g. We would like to block facebook from 7:00 to 10:00 and from 11:00 to 15:00. I was going through cisco manuals but can't find the right answer to this.
2. Cisco 871 has 4 LAN interfaces and one WAN interface. Currently WAN interface is connected to adsl modem in bridge mode and LAN 0 interface is connected to switch.
I'm interested if I could use remaining 3 LAN interfaces for adsl connections same as I'm using WAN interface. Then I would create vlans that would use LAN interface 0. Each of those VLAN's would use different adsl connection.I would assign different IP to each VLAN's so users would be able to change their gateway and use different ADSL connection.
I have recently had some problems with my home wifi connections however that has been resolved.A week after it was resolved, i noticed on startup my wifi did not appear on the connections tab so i have to restart my computer one or two times to make it appear
View 1 Replies View RelatedI have wifi laptop that I want to use for video to tv but obviously only using about half of download speed of hardwired desktop pc. Can I use ethernet cable hardwired on laptop while it is wifi or will this interfere with connection?
View 2 Replies View Relatedi have two networks accessing through Wi-Fi..if u want to access resources of A network from B then what should i do...means i have installed SQL database server on A network & want to access on Network B
View 1 Replies View RelatedI am in a house with 3 laptops connecting to the same wireless router, the connection speed is 3Mbps. Two of the laptops have no problems connecting to the internet but mine does? Every so often is will just disconnect and when you look for the wirless networks it does not detect any. A restart is required and all is ok, but not for long.
View 5 Replies View RelatedWhen I check available Wi-Fi networks it says "No connections are available. All of our other computers work so I dont know what the problem is. When I check device manager for the adapter it says my adapter is enabled so I dont know what the problem is. How can I get it to recognize my wi-fi?
View 1 Replies View RelatedWhat I want to do is combine a sad 1.5M DSL connection and a long range WiFi signal into a single connection for a rural area home.I am looking for any effective solution (including boosting WiFi output signal beyond FFC suggested values). The WiFi long range antenna (DISH + gutted LNB) receives a full bar 40+ Mbps signal from 11 miles away. DSL is standard 1.5M over DSL Modem.
View 2 Replies View RelatedI bought my Sony Vaio notebook about 2 years ago and have since had problems connecting to certain networks. The laptop will connect to the network but when i open my web broswer it doesn't let me access any web pages. Basically there's no internet connection even though im getting a full strength wifi connection.
This problem only happens in certain locations. My parents house its fine (using a sky router), my old house in London fine (sky router again), my friends house (doesn't work), my new house (doesn't work - BT router), on the train (no again)
Its very frustrating, although it was manageable before as it worked in both my houses. However now it doesn't work in my new house its pretty much pointless me having the internet.
My laptop is not detecting any wifi connections. I have plugged my iphone in and internet will run off that. have tried troubleshooting but nothing. Its a toshiba satellite and using windows 7?
View 14 Replies View RelatedWhen I connect 2 laptops to my router, why does the speed/connection get split? I would understand that if the speed was maxed out or something but it's a lame 500 kb/s connection. Do all wify routers behave this way? It's kind of annoying since there's a trafic quota limit implemented and when someone downloads, the other one can't do s^&t? how to handle this?
View 8 Replies View RelatedI have been using a TP-Link wifi adapter for last two months, It worked flawlessly till a couple of days ago. It just so happened that i turned on my computer and even though the wifi connections were available, when trying to connect this message keeps showing up " Windows was unable to connect to UoC WiFi". I have tried everything from making a new wifi connection to changing usb-ports
FYI I use the same wifi connection on my netbook and android, and they are working fine, so it's definitely not a problem with the ISP.
[code]....
I have recently been experiencing a problem. This started to occur after I had gotten new internet service and a new router. I now have comcast, and a new NetGear router. I also have a VOIP phone connected to the router call "AllVoi". Now, whenever I use this phone, all connections on WiFi go down as I am using it. While, when I am using any ethernet connections dirctly from the router, it works fine. It becomes a large problem when you are watching a video or something from a laptop WiFi connection.
View 2 Replies View Relatedsetting up a single home network in my apartment that will be able to connect to and use 2 separate wifi internet connections to provide stability and reliable bandwidth for a home network.
Situation: I have recently moved into an apartment complex that has 2 separate wifi connections that are available to the residents free of charge. (yes i am authorized to use both) I do have the option of paying for and having my own personal DSL line installed but I would much rather use the free wifi and not have the monthly bill.
The Problem: My apartment is located far enough away from each of the routers (One wifi at each end of the building and I am in the middle) that my signal strength is poor most of the time and sometimes heavy traffic on one wifi requires that I disconnect and connect to the other. Wifi A is farther and has very low signal and low or no connectivity. Wifi B has good signal most of the time but gets very slow during peek usage times of the day.
I understand that I need one or more high gain antennas in order to receive adequate signals from either Wifi connection.
Between me and my son we have 2 laptop PCs, 1 Desktop PC, 1 network printer, 1 Xbox, 1 HDTV and my smartphone. I don't want to try to equip each device with its own high gain antenna and try to figure out which device should be connected to which Wifi depending on available signal and bandwidth. Rite now I do not have a Home network set up at all and we are only using 1 laptop and the Xbox and each is directly connected via wifi (usually to Wifi B).
If I could connect to either Wifi A or B with decent bandwidth and reliability and then be able to network or connect all my devices via wireless or wired to my own router/extender etc. I would be happy. However.. Given that I must share bandwidth with the other residents and at times one Wifi has heavy use while the other does not. I have been trying to research how to connect to both wifi signals for load balancing, reliability and hopefully greater bandwidth.
My DIR-655 drops WiFi connections every few days. All wired connections are fine. Rebooting the router fixes the problem at that time. Cable modem works perfectly fine. [code]
I'm sure I'm missing some devices, but that should give you the general mix of wired/wireless devices that I use. I'm single with visits from my son every other weekend, so network traffic is not that high at my house. I've had this router for a couple years now and didn't use to have this problem. I've been updating the firmware, and I suspect this problem happened after on one those updates. I just don't know which one. Also, I didn't use to have any neighbors with Wireless Routers (that I could detect), but recently there have been 2 who have gotten them. I was hoping this was a problem that D-Link was aware of, but that does not seem to be the case. I would hate to have to go out and buy a new router (not D-Link).
Region : Mexico
Model : TL-WR841ND
Hardware Version : V8
Firmware Version :
ISP : Telmex fiber
I use this router to replace the FO rooter that my ISP provides with the service as it's too limited (no NAT name translation, closes NAT, no uPnP etc...)
So the WR841ND acts as my main router, DHCP server, WiFi AP for all my network. My problem is that once in a while ( every 1 or 2 days) the wireless loses functionality, I still can see it from my devices, but can't connect, even fixing the IP (apparently not a DHCP issue then). The only way to fix this is to shut down the router 10 sec and restart it.
This brings another issue, I have another router (WR741) in WDS dispatching the signal to another part of the house to wired devices (Xbox , wd tv live hub) and it loses the WDS link, again the only way for this router to recover it is to restart it which is annoying.
I have DIR-615 Cx (bought in Taiwan) Hardware C2 ver. I reflashed with DIR-615 firmware from Singapore to get English interface. I connect to a internet through another router on which I setup D-Link on DMZ with port forwarding. Router works fine, I have internet connection. So the question is: I have small cafe and want to offer customers WiFi connection. I want to setup a time limit and allow them to browse only internet not internal network. (When I connect laptop to D-Link Wifi I can see my NAS on different subnet connected to cable modem/router) And if its possible to limit bandwidth. Can I do it with DIR-615 and how to configure such a setup?
View 1 Replies View RelatedI am using Windows 7 Home premium SP1 (x86). I can connect fine and after a (seemingly random) amount of time the connection will drop (at least according to windows). I can also easily reconnect without a problem, but it will not pick back up the connection automatically, which is a problem because I use programs that need to access the internet and Often leave large files to download while I'm sleeping or not home. So If I'm not sitting at my computer to manually reconnect, then whatever i'm trying to accomplish doesn't get done.I'm using the ALFA AWUS036H USB wifi adapter. I had previously been running windows XP and this same thing would happen (though, much less often) but when it happened in XP it would automatically reconnect in a few seconds. I downloaded the drivers from ALFA's website incase the ones on disk were not up to date, and I tried both of them (they have a "normal" and "power control driver" option) and the problem remains. Also, I've never used an external wifi adapter before so I'm not sure if its supposed to work this way, but there are 2 "signal strength meters" in the system tray the standard windows one that you can click on and see available networks or go to windows "network and sharing center" and then there is the ALFA one that you can click on and it takes you to the ALFA wireless LAN utility, where you can also get a list of available networks.According to windows there is a problem with the connection, however according to the ALFA wireless LAN utility, the connection is fine (green bars means good connection, red bars means no connection)When clicking on the Windows "signal strength indicator" in the system tray, it shows 1 of 2 different problems (notice the differences that I've highlighted with red boxes). No matter which one happens I can NOT access the internet. Despite the "problems" shown above, the ALFA wireless LAN utility shows that its still connected (while windows is showing a connection problem)To reconnect I switch to the "profile" tab (which is just a list of neworks that i've previously connected to) and double click on the network. In this case it will be Enotria Public.... the same one that (according to the ALFA wireless LAN utility) I'm already connected too After clicking on the network, the ALFA wireless LAN utility "signal indicator" in the system tray will briefly turn red (signaling NO connection) while it "reconnects". Then it will turn back to green, and Windows network manager/signal indicator (whatever you call it) will proceed to reconnect as well. After this happens, all is good and I'm reconnected and can access the internet.
As you can see in pics above the ALFA wireless LAN utility is always connected, and it never drops the connection but even so, the internet will not work when Windows drops the connection. However, When reconnecting I can access the internet BEFORE Windows reconnects. (I still have to reconnect as described above, but after I do so I can access the internet before windows FINISHES reconnecting) The tab shown in this picture was a web page that I loaded BEFORE Windows ever reconnected, and it is a page that I have NEVER viewed before, so its not just loading it from cache.
I have an ASUS CG5270 desktop with windows 7. The desktop says that there are no connections available; however, my laptop is connected and showing all the networks in the neighborhood.
View 2 Replies View Related