Cisco VPN :: How Many VPN Connections ASA5540 Can Provide At Same Time
Apr 15, 2013How many VPN connections the ASA5540 can provide at the same time?
View 2 RepliesHow many VPN connections the ASA5540 can provide at the same time?
View 2 Repliesi have two CAT3750 need to place in L3, and it supposed that used as L3 switches by SVI for L2 routing, and I want to these two configured as redundancy by HSRP. but now I can only have one ASA5540 to connects these of L3 switches.
so, here is my questions:
1. does ASA5540 support multi vlan?
2. does it support spanning tree protocol?
3. if I've choiced to use trunking between two L3 switches, does it can pass through HSRP hello msg?
4. achive network redundancy
I am using cisco ASA 5540, Is there any command to check the tunnel uptime?
View 2 Replies View RelatedI'd like to use 2 internet connections at the same time.Assuming there are two internet networks.Network A and Network B (both are either wireless OR one is wireless and one is wired OR both are wireless). So, now I want to use BOTH internet connections simultaneously. However, both connections will still be separate and not combined:If I had to transfer big files, then I could do this on network A.Now, I want to use network B for other "normal" internet use so that the transfer of files in network A gets the maximum speed since there is no interference with anything else.I have to let the computer know somehow that there are two connections used simultaneously. I also have to setup what programs use what connection. E.g., IE uses network a and Firefox uses network b, program "x" also uses network b, etc.I would use two network card/USB Wifi Adapers so that each network card/wifi adapter can connect to one network.how do you realize that without setting a Virtual Machine up?
View 9 Replies View RelatedAny input on this: We had a DMZ server that customers used to get to their information. This sever was the front end to get to the host that holds the customer information. The server was in a DMZ, the path from Server to host was: through DMZ switch, through firewall to 6509 switch to the host. We never had a problem with this, the server application was old but worked great.
We have since moved to having someone host the front end. The front end connects via Internet to their third party router, to the same DMZ switch through same firewall, to same 6509 to host. The third party router is configured with VPN tunnel to remote end. Connection comes through Internet to their router and is Na Ted then goes to DMZ, to host.
Internet---E1 (Router NAT) E0 ---ASA---6509---Host
We have had nothing but trouble with this connection. Customers are complaining because the connections time out so much. We see a lot of tcp resets on the host to the Router NAT ip address (which is the DMZ side interface). The resets usually show "Invalid Query Header Length". The current connection is capped at 1Mbps, with average response times of 50ms (spikes to 200).
They keep telling us that something is wrong with the host, but I have to believe the latency is causing us problems. I can see that bandwidth seems to be enough as I do not see the interfaces utilizing that much, averages about 300K. I was wondering could the IOS NAT be contributing to the problem as well?
I hav two different internet connections by different service providers,one is LAN and other is WIRELESS.whn i turn off the WI-FI button n put the lan connection thn it shows connected but pages dnt open and a reload message comes and thn i unplug LAN n turn on the WI-FI conctn thn i m able to connect and surf.so, i m only able to use the wireless one..
View 2 Replies View RelatedI have laptop with windows 7 ultimate.i have two internet connection avalable...
1> wifi network of my office...which is protected by cyberom..so i cant open facebook and other restricted sites
2> internet through my android mobile...which is dialup connection or through usb tethering
i want to use office wifi for downloading via idm or other download manager and my mobile internet for social networking..or any idea i allow application to connect internet via perticuler network/way..
My kid is heading off to college with a Toshiba Satellite E-205 laptop and a Kodak ESP Office 2150 printer. She would like to use the wireless printer option on the Kodak, which requires a wireless router. I have a D-Link DIR-655 wireless router that I can send with her.
I know her university has a very robust wireless system for Internet access, so she is going to want to use their wireless access.
So, the DIR-655 sole use will be to allow access to the printer. It will not be accessing the Internet or be cabled into the university's network.
Is it possible to operate TWO wireless connections at the same time so she can hit her university wireless and the DIR-655 so she can print wirelessly?
how do I configure the laptop and the DIR-655 to allow this kind of access?
I have two wireless connections at home from 2 different ISPs. How can make my laptop connect to both routers at the same time to make use of them?
View 1 Replies View RelatedHow to connect two or more internet connections at same time to increase internet speed ?
View 1 Replies View RelatedHad laptop connecting wirelessly perfect with no problems. We then added another laptop and PSP 3 to the house hold. Any of the 3 devices will connect to the internet via wireless but ONLY one at a time. If you are connected with one and turn on one of the others it will kick the one off that you were on and only 1 device can use wireless at a time?
View 4 Replies View RelatedI haven't really allowed this to bug me too much, but I went over by a friend's house, used his WiFi, closed my Laptop, it disconnected, I reconnected to his network, came back home, now every time I restart or Shutdown my computer I have to reconnect, not that big of a deal
View 5 Replies View RelatedI have Cisco 871 router with 12.3. OS version.
1. I'm interested if it's possible to block certain contetn only at certain time ? e.g. We would like to block facebook from 7:00 to 10:00 and from 11:00 to 15:00. I was going through cisco manuals but can't find the right answer to this.
2. Cisco 871 has 4 LAN interfaces and one WAN interface. Currently WAN interface is connected to adsl modem in bridge mode and LAN 0 interface is connected to switch.
I'm interested if I could use remaining 3 LAN interfaces for adsl connections same as I'm using WAN interface. Then I would create vlans that would use LAN interface 0. Each of those VLAN's would use different adsl connection.I would assign different IP to each VLAN's so users would be able to change their gateway and use different ADSL connection.
Region : Canada
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Bell
I'm having to reboot what is now my 2nd router every 1-2 days in order for all connections to resume working. My 2nd router was working great since Saturday afternoon, and just now I needed to reboot in order for my laptop to connect to the network.Now that it seems pretty clear the router in general isn't faulty, I suspected that the issue was IP lease related, so I was looking at DHCP settings and changed the lease time to 2880 (max setting), from 120 (default). However, this should only prolong how often i'll need to reboot the router. So, what is it that's causing my devices to disconnect or not being able to connect to the router for a prolonged period of time?
I have got two links from the same ISP, primary and secondary and connected to two different switch. The ISP have passed the trunk vlan of 30, 31 and 32 on both of the links. The ISP can't provide stp. I have got another managed 2960 series switch. How can I obtain failover on switch level.
View 2 Replies View RelatedWhen one sets up a wireless network, do devices that use the Internet wirelessly benefit from increased security because their connection comes through a router? I thought I heard this from a tech podcast. I don't mean security from hacking, such as having a password, etc. I mean that the router itself gives some security from virus.
View 5 Replies View RelatedThe ONLY reason I bought a router was to get connected to my Security DVR. I don't want to provide Internet for a network. Maybe someday but my only wish right now is to be able to view and control my DVR with my computer. It is hidden away and hard to get to at the moment so a Lan connection would be great.
I tried direct connect with a Crossover cable between the DVR and my computer. The network was reporting as "Connected" but I could not see the DVR much less view the video. Their support said they'd never heard of this configuration. Could not understand connecting without Internet and wasn't sure if it'd work without a Router.
So, first I bought a wired router(EBR 2310) because I didn't need or want the wireless aspect. I followed all instructions until it came to Internet connection setup. Then became lost because I don't have a dedicated ISP, I'm using a USB modem for connectivity. I don't have a static IP so could not enter on. So, backed out of setup and entered the IP of my computer to be 1 higher than my DLink routers. 192.168.0.2. Gateway .1, NO dice. Router not recognized.I called support and stayed on the line over an hour. Finally he said the unit was defective. It would not assign IPs theough DHCP. We ipconfiged, pinged reset and all.
I took it back and got an DIR615, hoping it might be a little better. Same problem. Computer says Connected" but when I ping it, there is not sigh of it. I have manually assigned IPs, DHCPed it reset it rebooted my computer, but still no sign of a router.
I wonder if PI 1.3 can draw the topology of the devices which is discovered by prime automatically, or if i can draw it by myself in Prime?
View 4 Replies View Relatedwe have a ASA 5510 firewall and i have created remote vpn user who connects the internal network via vpn any connect after connecting i want him to only access his internal PC via rdp and not access other internal website or shared folders without connecting to the RDP however now he can access the internal website wihtout connecting to RDP?
View 3 Replies View RelatedCan the Nexus 7000 provide NTP to the rest of my network? Can it be an NTP server? I have the followign ntp configuration on it, and have used the commit command, but it seems to be ignoring any NTP requests from other devices. [code]
View 8 Replies View RelatedIs it possible to provide communication between two different interfaces which had configured as different security level in ASA 5510?
View 3 Replies View RelatedI've design a network with wrt54g2 router, and I'm configured with IDIRECT MODEM and its providing dhcp and it's working properly. But I want to provide static IP to my clients.
View 9 Replies View RelatedI have a ace board(Acsm) in my switch 6509.I need provide access for clients over https, my scenario looks like this post [URL] .But, i have only one interface, and need to configure nat for inbound clients, to access the server with ip address of the interface vlan of my ace(if i set ace gateway in a rserver, the ssl termination works). The Topology is: Client(https) -> Ace(Https) -> Ace(http) -> rserver (http). Need to configuring this nat? I need that external clients arrive at the server with the ip of the same network as him, he did not right back the packet to the default gateway, but the origin of the same network as him, so that the communication function successfully, end order.
View 1 Replies View RelatedWe are having a SRP526W here which replaced a cheap, simple router. Now we would like to set up the VPN-access for outside clients again. So far this was done by forwarding PPTP (TCP 1723 and GRE) to the Windows 2000 Routing and RAS-server inside the network.According to this post the SRP521W, and therefore I suppose as well the SRP526W, are not able to forward GRE: [URL]
Is there a way to provide VPN access for outside clients with this router? Maybe with L2TP (but then we would need to forward ESP) or IPSec (ESP and AH as far as I know)?
If there is no solution we would need to replace this device again with a cheap, simple router which is able to forward GRE - as you can imagine, we would like to save Cisco from this shame.
I have a PC running my server application and several iPad Clients, and therefore need a WLAN to connect them.
Can I simply plug an access point such as a Cisco Aironet 1602i into the LAN port of the PC to accomplish this?
I am setting up 1811w router for accessing internet. DHCP is configured on it but it is not providing IP to laptop connected on port fa6.
Here is config of router
dot11 ssid internet
vlan 98
authentication open
[Code].....
I have DHCP server running in windows 2003. Presently its unable to provide Ip address for VPN clients who connect remotely. What I should do / reconfigure in DHCP, so that the DHCP server provides address for VPN clients.
View 4 Replies View RelatedWhich range in radius can "HP PROLIANT DL 380 (G3)" provide a wireless internet?
View 1 Replies View RelatedRegion : Greece
Model : TL-WR941ND
Hardware Version : V5
Firmware Version :
ISP :
Does TL-WR941ND provide support for 802.1x? (It is not mentioned in the product data sheet, but I found here: [URL] that it is supported on the above device.)
I have upgraded my C3560-PS-S switch to the latest IOS version 12(2)55-SE4 and it is not providing PoE anymore? It used to work before this upgrade? I searched Cisco bugtrack and there is bug defined for this IOS/Switch.
Switch(config-if)#do show power inline Available:370.0(w) Used:0.0(w) Remaining:370.0(w)
Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Fa0/1 auto off 0.0 n/a n/a 15.4
Fa0/2 auto off 0.0 n/a n/a 15.4
Fa0/3 auto off 0.0 n/a n/a 15.4
Fa0/4 auto off 0.0 n/a n/a 15.4
Fa0/5 auto off 0.0 n/a n/a 15.4
Fa0/6 auto off 0.0 n/a n/a 15.4
Fa0/7 auto off 0.0 n/a n/a 15.4
Fa0/8 auto off 0.0 n/a n/a 15.4
Fa0/9 auto off 0.0 n/a n/a 15.4
Fa0/10 auto off 0.0 n/a n/a 15.4
Fa0/11 auto off 0.0 n/a n/a 15.4
Fa0/12 auto off 0.0 n/a n/a 15.4
Fa0/13 auto off 0.0 n/a n/a 15.4
Fa0/14 auto off 0.0 n/a n/a 15.4
Fa0/15 auto off 0.0 n/a n/a 15.4
Fa0/16 auto off 0.0 n/a n/a 15.4
Fa0/17 auto off 0.0 n/a n/a 15.4
Fa0/18 auto off 0.0 n/a n/a 15.4
Fa0/19 auto off 0.0 n/a n/a 15.4
Fa0/20 auto off 0.0 n/a n/a 15.4
Fa0/21 auto off 0.0 n/a n/a 15.4
Fa0/22 auto off 0.0 n/a n/a 15.4
Fa0/23 auto off 0.0 n/a n/a 15.4
Fa0/24 auto off 0.0 n/a n/a 15.4
I've got an ASA 5505 running 6.3 I've connected the management interface to our management vlan (which contains switch IPs, ilo's etc)Is there a way to allow access to this vlan from another?
View 1 Replies View RelatedEquipment Cisco1921, HWIC-1ADSL, 2 x GB Ethernet interfaces (Only one used for local LAN) Software IOS Version 15.1(1)T2..I have been asked to configure this router to provide an IPSEC tunnel back to our central office.We have been provided with an ADSL business class 7MB service from Telecom Italia, they have presented the circuit to our office with no terminating equipment (wires only). Telecom Italia have provided us with some IP addressing information as follows (I will not disclose the entire IP address) [code]
I can see that the packet count is increasing both inbound and outbound on the ATM interface. I have read many documents and tried many different way to try and get this resolved, I even logged a call with Cisco but no dice.
I need to configure a network in 1 small office space that segregates 2 company domains but allows them to share an Internet connection, a WAP, a couple of printers, and a non-Cisco VoIP phone system. And, it needs to provide guest access to the internet and printers via wireless. I have a SG300-28P, an SA520W, and a WAP2000 to make it all happen. [code]
View 3 Replies View Related