D-Link DIR-615 :: Don't Want To Provide Internet For A Network
Feb 8, 2011
The ONLY reason I bought a router was to get connected to my Security DVR. I don't want to provide Internet for a network. Maybe someday but my only wish right now is to be able to view and control my DVR with my computer. It is hidden away and hard to get to at the moment so a Lan connection would be great.
I tried direct connect with a Crossover cable between the DVR and my computer. The network was reporting as "Connected" but I could not see the DVR much less view the video. Their support said they'd never heard of this configuration. Could not understand connecting without Internet and wasn't sure if it'd work without a Router.
So, first I bought a wired router(EBR 2310) because I didn't need or want the wireless aspect. I followed all instructions until it came to Internet connection setup. Then became lost because I don't have a dedicated ISP, I'm using a USB modem for connectivity. I don't have a static IP so could not enter on. So, backed out of setup and entered the IP of my computer to be 1 higher than my DLink routers. 192.168.0.2. Gateway .1, NO dice. Router not recognized.I called support and stayed on the line over an hour. Finally he said the unit was defective. It would not assign IPs theough DHCP. We ipconfiged, pinged reset and all.
I took it back and got an DIR615, hoping it might be a little better. Same problem. Computer says Connected" but when I ping it, there is not sigh of it. I have manually assigned IPs, DHCPed it reset it rebooted my computer, but still no sign of a router.
View 10 Replies
ADVERTISEMENT
Feb 6, 2013
I've been trying to set up my new Cisco 1921 Router to provide internet access to my local network but with no success. I've been reading guides and looking at videos and I have to be missing something becaouse I can't access internet (ping/tracert) from my local network.
The DHCP server works fine and the clients on my local network gets ip-adresses from the router but can't ping or tracert outside the local network.
[code]....
View 2 Replies
View Related
May 6, 2013
Region : Greece
Model : TL-WR941ND
Hardware Version : V5
Firmware Version :
ISP :
Does TL-WR941ND provide support for 802.1x? (It is not mentioned in the product data sheet, but I found here: [URL] that it is supported on the above device.)
View 1 Replies
View Related
Aug 4, 2010
Can the Nexus 7000 provide NTP to the rest of my network? Can it be an NTP server? I have the followign ntp configuration on it, and have used the commit command, but it seems to be ignoring any NTP requests from other devices. [code]
View 8 Replies
View Related
Jul 25, 2012
Which range in radius can "HP PROLIANT DL 380 (G3)" provide a wireless internet?
View 1 Replies
View Related
Aug 24, 2011
Do these powerline "twin packs" provide a way to connect 2 things at once to the internet, or does that require 3 adapters? I'm assuming one connects to my router, then one to my PC. I'd like to connect my Xbox and my PC on the same network (Though they're in the same room), is this something that can be done with a "twin pack"?I've looked around a bit, and it would seem the twin packs allow you to connect one to your router, and one to your PC/Xbox etc. If this is true, then the single packs just provide an "extra" one, should you need to connect in more places. I've also seen some 4 port adapters, but these seem expensive, and I would have to buy a 4 port adapter, and a single port adapter for my router?
View 7 Replies
View Related
Feb 26, 2012
I need to configure a network in 1 small office space that segregates 2 company domains but allows them to share an Internet connection, a WAP, a couple of printers, and a non-Cisco VoIP phone system. And, it needs to provide guest access to the internet and printers via wireless. I have a SG300-28P, an SA520W, and a WAP2000 to make it all happen. [code]
View 3 Replies
View Related
May 7, 2013
One of our customer , where there 2 6509 switch , one is Core_sw1 and other is Core_sw2 , catering about 32 Vlan , and HSRP in running for all Vlans , till here no problem , now there internet Router which having one Internet link , which connected and configured on Core_sw1 in a way that one interface of Core_sw1 is given Public IP and there is vlan 85 which internet vlan and vlan 85 ip are natted with that public IP with one simple static route given toward internet router , this is how internet is working ok.
Now i have configured vlan 85 in hsrp as all other are , how can give redundancy to vlan 85 user , that if Core_sw1 get down , internet traffic can get out through Core_sw2.using same internet router with single internet link .i am not talking of ISP redundancy , but Vlan 85 in Core_sw1 goes down , other Core_sw2 will server internet.
View 1 Replies
View Related
Mar 8, 2011
When one sets up a wireless network, do devices that use the Internet wirelessly benefit from increased security because their connection comes through a router? I thought I heard this from a tech podcast. I don't mean security from hacking, such as having a password, etc. I mean that the router itself gives some security from virus.
View 5 Replies
View Related
Apr 15, 2013
How many VPN connections the ASA5540 can provide at the same time?
View 2 Replies
View Related
Apr 20, 2013
I have got two links from the same ISP, primary and secondary and connected to two different switch. The ISP have passed the trunk vlan of 30, 31 and 32 on both of the links. The ISP can't provide stp. I have got another managed 2960 series switch. How can I obtain failover on switch level.
View 2 Replies
View Related
Dec 5, 2011
My router just dropped the internet. I checked with ISP and confirmed that their modem is fine - I can connect direct into that - but the DIR-655 won't connect externally. I've tried wireless and wired and can connect fine to the router, but it is like the firewall has reset itself or something. at the moment I'm surviving because of a 30m long ethernet cable to the modem going out the window and round the house!
View 5 Replies
View Related
Mar 17, 2011
I have DHCP server running in windows 2003. Presently its unable to provide Ip address for VPN clients who connect remotely. What I should do / reconfigure in DHCP, so that the DHCP server provides address for VPN clients.
View 4 Replies
View Related
Jun 1, 2013
I wonder if PI 1.3 can draw the topology of the devices which is discovered by prime automatically, or if i can draw it by myself in Prime?
View 4 Replies
View Related
Sep 27, 2011
we have a ASA 5510 firewall and i have created remote vpn user who connects the internal network via vpn any connect after connecting i want him to only access his internal PC via rdp and not access other internal website or shared folders without connecting to the RDP however now he can access the internal website wihtout connecting to RDP?
View 3 Replies
View Related
Mar 12, 2011
Is it possible to provide communication between two different interfaces which had configured as different security level in ASA 5510?
View 3 Replies
View Related
Nov 13, 2012
I bought the DIR-655 last year and till within warranty. Yesterday, I lost the wireless network on my laptops but internet was working. I contacted the d-link support and during the process of troubleshooting the problem, the internet connection was also lost. I followed all instructions given to me by d-link teams that spoke with me but the problem was not resolved. I tried to call the d-link support but my calls were ignored . Up till now, the wireless and internet connections through DIR-655 are not working.
View 5 Replies
View Related
Mar 6, 2012
I have a working wired network and really all I want to do is set up my DIR-655 on it so that it provides internet only for wireless users, but doesn't allow access to the rest of the local network. I though that's what the Guest network would do, but when I connect to that I can still type in local IP addresses and get to those devices.
"Enable Routing Between Zones" is unchecked in the Guest Zone settings.
View 3 Replies
View Related
Mar 4, 2011
Internet access is working fine, however I cannot get my computers to work on the network therefore cant share any files or play any network games. The router is set up as DHCP server therefore IPs are automatically assigned, this is setup on the PCs and the router. The work group is also set. Exactly same settings basically as my old router which worked fine but wont on this one! I have 3 wired PCs and a wireless laptop. 2 PCs are windows XP the other is Windows 7 and the laptop is windows 7. The wireless win7 laptop will recognize my win7 wired PC and vice versa and can share everything without problems, but they wont have anything to do with the wired winxp PCs, on top of that the 2 winxp wont recognize each other either so don't think its anything platform specific. I have also tried setting up static IPs for each computer - still no joy.This is a brand new D-Link DIR-655 Rev B1 firmware 2.00
View 3 Replies
View Related
Apr 4, 2012
My Speedtouch 516v6 modem does'nt provide gateway adress to the TP-Link router. The modem can work in bridged mode or routed mode and I want to use routed mode. TP-Link has PPPoE mode but I would like to use a dynamicIP mode in which the router obtain network parameters from the modem and it does, but it does not obtain a gateway address.
View 2 Replies
View Related
Aug 23, 2011
I've design a network with wrt54g2 router, and I'm configured with IDIRECT MODEM and its providing dhcp and it's working properly. But I want to provide static IP to my clients.
View 9 Replies
View Related
Aug 23, 2011
I've design a network with wrt54g2 router,and I'm configured with IDIRECT MODEM and its providin dhcp and it's working properly.But I want to provide static IP to my clients.
View 2 Replies
View Related
Oct 16, 2010
I set up my internet access by adsl modem as gateway, then RV042 as load balancer and dhcp server, security by MAC address restriction and static IP assignment. WAP 610N used as access point.works great for first few weeks, then somehow I can't access the network.I've been using linksys on my SOHO network, no problem before (RV042+WAP54g)
View 9 Replies
View Related
Jun 15, 2011
I have a ace board(Acsm) in my switch 6509.I need provide access for clients over https, my scenario looks like this post [URL] .But, i have only one interface, and need to configure nat for inbound clients, to access the server with ip address of the interface vlan of my ace(if i set ace gateway in a rserver, the ssl termination works). The Topology is: Client(https) -> Ace(Https) -> Ace(http) -> rserver (http). Need to configuring this nat? I need that external clients arrive at the server with the ip of the same network as him, he did not right back the packet to the default gateway, but the origin of the same network as him, so that the communication function successfully, end order.
View 1 Replies
View Related
Nov 10, 2011
We are having a SRP526W here which replaced a cheap, simple router. Now we would like to set up the VPN-access for outside clients again. So far this was done by forwarding PPTP (TCP 1723 and GRE) to the Windows 2000 Routing and RAS-server inside the network.According to this post the SRP521W, and therefore I suppose as well the SRP526W, are not able to forward GRE: [URL]
Is there a way to provide VPN access for outside clients with this router? Maybe with L2TP (but then we would need to forward ESP) or IPSec (ESP and AH as far as I know)?
If there is no solution we would need to replace this device again with a cheap, simple router which is able to forward GRE - as you can imagine, we would like to save Cisco from this shame.
View 3 Replies
View Related
Feb 26, 2013
I have a PC running my server application and several iPad Clients, and therefore need a WLAN to connect them.
Can I simply plug an access point such as a Cisco Aironet 1602i into the LAN port of the PC to accomplish this?
View 2 Replies
View Related
Oct 19, 2012
I am setting up 1811w router for accessing internet. DHCP is configured on it but it is not providing IP to laptop connected on port fa6.
Here is config of router
dot11 ssid internet
vlan 98
authentication open
[Code].....
View 22 Replies
View Related
Oct 19, 2012
I have HP Dx7500 with windows 7 ultimate 32bit using intel 82567v-2 gigabite network connection the pc is connected to a router (D-Link 2760u) with a cable through 2 network points
I worked with this configuration for a month with no problems until one day after automatic restart coused by windows update i couldnt connect to the internet
As for now the pc is unable to identify my home network (when you look at the network adapter you can see "Unidentified network - No internet access") Ipconfig brings back APIPA 169.254... All the laptops in the house are connecting to the network with no problems when connecting with wireless adapter everything works fine
I tried the folowing :
- update the network adapter driver
- reseting the TCPIP protocol (netsh)
- static ip
View 8 Replies
View Related
Apr 9, 2012
ok when i'm playing my xbox 360 my brothers sister and my dad are on computers playing games and watching netflix and i lagg alot is there any way i can get my own network connection my internet provider is century link.
View 3 Replies
View Related
May 24, 2011
I have a wireless network set up in our small office. I just bought the DIR-655 and installed it (did have a very old Netgear router). I currently have two wireless printers, a MAC and a couple of iPhones that can connect to the network and internet. My desktop is plugged in and also connects fine.The BOSS just came in with his fairly new Win7 laptop and I connected it to the network, however, no matter what I try, it won't connnect to the internet. I can see his laptop in the network, it can see my computer and it says that it is connected to the network. It also says that it is not connected to the internet. I ran the troubleshooting (by clicking on the "X" between the network and the internet in the Network and Sharing Center) and it said it couldn't find the problem. The Win7 laptop has no problems connecting to the old network, nor any others that it encounters.
View 1 Replies
View Related
Apr 15, 2011
Have Win 7 on a desktop and laptop. Tried several ways through network wizard(novice on PCs) to setup network and no internet connection with either unit. The router sees the internet and the laptop picksup the network I setup but can not connect on either PC. I know I don't have a setting write and I do not know where to start again or what specifically to look for. We just want Internet on both PCs.
View 7 Replies
View Related
Mar 12, 2011
I have successfully setup the camera at home, that I can use the mydlink website to view. But when I go to work and open my IE to view, it does not connect to the camera. Do I know to do something at the router to make it unblock or some sort?
View 1 Replies
View Related
Jul 19, 2012
I recently bought a DIR-655 on amazon com, got a good deal. Since I'm old and slo, had issues setting it up, but finally got er dun!I set up a Network all by myself turned on player, did WPS(PBC) on player, and on D-Link. The router and Blu-ray are now friends, however, they are not on speaking terms.Network status on ol Blu- tries to connect then says - Network setting is completed, but cannot connect to the internet, Contact ISP.
View 8 Replies
View Related
