ok when i'm playing my xbox 360 my brothers sister and my dad are on computers playing games and watching netflix and i lagg alot is there any way i can get my own network connection my internet provider is century link.
View 3 RepliesI have internet thru Century Link (DSL). I also have a Netgear N-300 wireless router. My computer is 4 years old and is an HP with a G wireless adapter buit-in. Until yesterday, my provided internet speed was up to 7mbps. I received the same speed regardless of whether my computer was plugged in directly to the modem (1), plugged directly into the router (2), or wirelessly. We just upgraded our internet to 40mbps. Now, I get the 40 mbps when my computer is plugged into the modem or router, but wirelessly I only get about 4 mbps, 1/10th of what I get with wired.
View 3 Replies View RelatedI have a dual wan router with a main cable modem for high speed and a backup adsl modem hooked just in case. The problem is that quite often it seems that my ISP loose his connection to the internet but communication is not lost between my ISP and my modem and router. Because of this, my router doesn´t do the automatic changeover from my WAN 1 to my WAN 2 hooked slower ADSL modem. My router has the ping to keep alive option checked on the WAN 1 setings using my Cable ISP provided IP address.How can I force my router to notice that my cable ISP lost his connection to the internet and do right away the changeover from his WAN 1 to his WAN 2 input?
View 1 Replies View RelatedHow many devices can my century link modem/router handle? i have 2 iphone 4s's a Mac and 2 ps3's is this to much for it? i have a desktop pc that stays wired in.
View 4 Replies View RelatedI bought a Westell 7500 router off ebay to replace the same router provided by century link as I was trying to avoid rental fees. My computer recognizes there is a signal, but I can't get the internet to connect. Any settings I should change? The router I purchased was configured to at&t service. I have Century link. Century link won't assist me because it isn't their router.
View 3 Replies View RelatedAll, we have a cisco ISR 2921 router. We want to connect century link dsl via PPPoe on Gigabit int 0/0. G 0/1 is configured for a switch LAN. I think I may have missed a configuration on the router as It is not passing traffic. Do I have to configure anything so that it passes traffic to G 0/1 from G 0/0? Below is the running config
cts#show runBuilding configuration...
Current configuration : 5868 bytes!! Last configuration change at 22:49:20 UTC Thu Aug 9 2012 by ctsversion 15.1service timestamps debug datetime msecservice
[Code].....
I have a Linksys x2000 and have been using it successfully on DSL with a local ISP. I recently changed to Century Link and now I can't connect to the internet (Century Link). If I change the UserId and Password from my Century Link values back to my old ISP values, I can connect to my old ISP. Century Link tells me they have my account active with the X2000 and Century Link.
View 2 Replies View Relatedwho to connect two dsl connection with two different provider
View 1 Replies View RelatedSetup and Hardware D-link DSL-502T Belkin N Wireless Router (No wired connections) Computers on wireless Connections
No.1 Connected to the Belkin & Internet working
No.2 Connected to the belkin & Internet NOT working Tenda W322P Wireless PCI adapter installed OS - XP SP2
When I attempt to connect to the internet on computer No.2 it will not connect.
1. Belkin setup page shows both computers in the DHCP client list
2. Tenda shows connection to the personal network
3. No internet connection icons in the tool bar. There is an internet connection icon on computer No.1 showing two computers and a bubble.
4. No icons in 'Network Connections'
5. In 'My Network Places' there is a Belkin Icon but when properties is clicked it says "This item is not currently on your network".I may have accidentally deleted icons from network connections or some of the associated folders.
We have a D-Link DI-524 wireless router that has had no problems until today. Our laptops (with Windows XP), iPods, and iPhones all show that there is an excellent wireless network connection (as usual), but none of the computers or devices will connect to the Internet. I tried resetting, rebooting, and unplugging the modem and router. The router and modem seem to be fine. When we disconnect the router and plug the laptop directly into modem, we have Internet connection (i.e., it's not the IP).
View 4 Replies View Relatedwe are charter High speed customers and just recently upgraded are connection speedHowever today my sisters netbook wireless connection stopped working. My DS wifi connection is also dead now In the past the the wireless network name was wifi-****** but now its called wireless and the wep key no longer works
View 5 Replies View RelatedI have currently a Cisco 3600 router, it has three interfaces (all ethernet interfaces only).We being a client, our requirement is, we want two links one being the primary and one secondary for the fail over.My ISP has done certain configurations, but I am so puzzled what really has been done. I asked with them and they told that they have provided us one public IP 202.166.217.248 via Fibre--> Media Converter-->Ethernet 0/0.At the same time, they have given us a pool of addresses of the network 202.166.216.48/29 through the interface Ethernet 2/1.And we have used all the available public IPs in the server farm.They have told that, for the failover purpose via wireless, they have even used an IP address 202.166.213.114/25.
Now, where my confusion lies is, cant they provide the pool address via fibre? What is the significance of the ip that has been provided via fibre? What actually is its purpose? Isn't it consuming an extra interface ?Cant we have both the primary and secondary link excluding that one additional process?Or, am not understanding the real working mechanism how ISP distribute the internet?
ASA-5510, inside, outside, and some DMZ.Some services published with Static NAT - no problem.Now we need to add a second outside connection, with a second provider.Internet navigation only through the first provider (default gateway to the provider router "A").I need to publish some services ALSO through the second provider, ensuring the accessibility of both public IP addresses.I can set up the second NAT on the second interface, but the answer is ONLY to the first IP (the ISP "A", where I have the default gateway).By Cisco manual, it seems that there is a "lookup route" automatic with the return route of NAT, but it does not work.
View 6 Replies View RelatedMy modem with single network connectivity (Type I) works fine. I tried to replace with Type II modem (with wifi- and 4 or more ports) for connectivity. I could not establish connection with the server of the service provider. I tried to replace with a different type of typeII modem. Still the same. What could be the reason?I connected the same in a different workplace to a different PC.
View 1 Replies View RelatedRegion : India
Model : TL-WR740N
Hardware Version : V4
Firmware Version :
ISP :
how to setup an adhoc network using TPLINK WR740N without using any internet connection?I want to setup a WLAN connection between my Desktop and 2 other Laptops for file transfer and sharing.... how to search and connect to other available wifi networks using my router?
Region : Austria
Model : TL-MR3420
Hardware Version : V1
Firmware Version :
ISP : orange.at
When I first installed the router I used the built-in provider settings for "ONE" which used to be the name of the provider before it was taken over by orange.at. It seemed to work fine but I experienced some funny server errors with certain web services. I contacted orange.at about this and they told me to adjust the provider settings in the router as follows:
Dial number: *99#
APN: fullspeed
The reason for the problems was that they use different proxy servers for their services and applications. Now it works fine (so far).
We are connected to 2 different providers (PROV01 and PROV02) with eBGP full internet tables. PROV01 routes have higher local preference over PROV02.
We are having problems with our provider and would like your expertise. PROV01, higher preference has been having trouble with their router. The BGP remains up but the router stops forwarding traffic. as a resulta we lose connection to the internet but our traffic never goes to PROV02 since PROV01 BGP remains up announcing the 400K routes to us.
Is there a way to test internet connection though PROV01 and as the "internet is DOWN" automatically change traffic to PROV02? Can BGP parameters changes be triggered by IP SLA? Our router is an ASR1006 RP2.
how do set up a network provider so i can send and receive E-MAIL i use XP
View 1 Replies View RelatedMy internet service is telling me all of a sudden that my computer has no IP address for my laptop to connect to the modem?? The laptop was given to me so I have none of the disks or anything. How do I get an IP address to be able to use my internet provider?
View 2 Replies View RelatedI am planning to use a pair of Catalyst 3750 for QinQ over a L2 link (lan extension)
We neeed to have control over what vlans we propagate over this link and we want to avoid incuring costs for every aditional vlan we might need to add to the trunk that would connect to the QinQ provider switches
Our workaround for this would be to ask the provider to give us an end to end vlan that supports MTU-1504B (QinQ frame size) and connect our switches to this.
I have Windows 2008 server running isa server with dedicated ip (which I take from my Internet Service Provider ISP) running my website, if my internet connection is down my website is not accessible from outside world.How can I switch to another ISP using same dedicated ip address when my ISP connection is down?
View 1 Replies View RelatedIs this a wired or wireless connection issue? Both Who is your Internet Service Provider (ISP)? Comcast..What type of Broadband connection are you using? Cable..What is the exact Make and Model of your Modem, Router or Modem/Router Combo - (Main)Netgear WNR3700v2 / WNR2000v3(secondary) My current setup is the 3700 router is taking the internet from the modem cat5e and spewing the wireless. I would like to have the secondary router use the wireless from router 1 as the internet source and push the internet out of the 4 hardline ports so I can plug my upstairs xbox 360 into the router via cat5e. I'm just kinda new to this and still learning so I'm not sure how to configure the router to do this. I can get into the settings of the router just fine but finding the right settings to tweak is a little difficult.
View 3 Replies View RelatedWhat are my best options to secure branch office connection to HQ over Provider MPLS cloud. Our existing Setup
<<HeadQuarter>> :: DataCenter hosting Email, ERP, Intranet, Voice Services 10mb link to Service Provider over MPLS CloudMPLS is terminated on a 3825 Router running advance Services
<<BrancOffice>>::Total 10 In Country Branch Offices2mb Link to Service Provider over MPLS CloudTotal users in each branch : 20 MPLS is terminated on a 2811 Router running advance Services
I have a wired broadband connection with a modem. My internet service provider does not have Wi-Fi. Can I convert it myself into wi-fi by connecting it to a router. If possible how?
View 6 Replies View RelatedI just switched from an AT&T T1 ISP to Comcast cable, which supplies a motorola modem, pushing 5MBPS downstream. This modem is not recognized by the router, a Belkin wireless G model, F5D7234-4 V5. After numerous attempts to restart both the modem and the router, the modem light does not turn on, nor is a wireless connection recognized by my computer, a new Macbook Pro. The router worked fine with the AT&T connection.
View 1 Replies View RelatedJust bought a router RV042G for company. Why does the router configuration requires two IP addresses for the two ISPs. What if we only have one ISP? How should i correctly configure router for one ISP (internet provider)
View 3 Replies View Relatedin a week or two we are going to put in a secondary internet connection. Is there a way on a pix 515E to have one internet provider be preferred over the other and if the primary fails then the secondary will take over?
View 3 Replies View RelatedIn the settings menu, there is no l2tp in which it was possible to configure a local address of the router. It should be: 10.155.41.41There is an option only for VPN server setup(10.255.255.254), but where it takes a local address that my provder has gave me? - it is not clear. At the same time in the status of the router receives a DNS correctly and the second address embarass me little bet DNS should be:
1) 80.252.130.253
2) 80 252.130.254
first dns is correct, and second one looks like: 80.252.45.86Maybe he does not take a local setting of ip adress via DHCP?
If I have a wireless network set up with the Linksys E1000 using one internet provider and then change the internet provider service to someone else, do I have to reset up the network or is it simply a matter of connecting the new internet service to the router?
View 3 Replies View RelatedI just bought a "DLink Xtreme N Gigabit Router DIR-655" I configured it correctly. It works well for the wireless connection but my Lan connection (wired connection) does not work. The Lan computer connects to the router but cannot access the internet. All of my machines work OK with a Netgear G router, including the Lan computer.
View 9 Replies View RelatedMy DIR-655 has worked for 2 years, but can no longer access the internet. My ISP is (Rockbridge Global Village -sub of Ntelos) and my modem is a Zhone. My connection type is DHCP, QoS is set to active, and the IP address boxes are not being filled in. The cables check out ok and there is no problem connecting to the internet if I bypass the DIR-655 and connect direct to the modem. Hardware is A4 with firmware 1.21
Nothing has changed in the house with regards to new cordless phones or wireless devices and I am using the same Zhone modem. I have tried returning to factory defaults and reconfiguring.
I have bought a new router to my parents these days, it a DIR-615 HW H1 firmware version 8. We have a ZyXEL Prestige 2000 series DLS modem.
There is no problems with connection to the DIR-615 router, but the strange problem occurs when I plugs in the internet cable. At the beginning the internet start to work fine but after some time the internet does not work anymore. What may cause the problem? The internet works if I plug the internet cable in my computer and it also work with the old router.
I use my desktop for streaming media throughout the house. I found it was causing lag for gaming most likely because it was taking up all the bandwidth for the router. We had a 2nd router laying around as well as a 2nd wireless adapter so we set up a 2nd network that was not connected to the internet for strictly media streaming.I attempted to change the network settings so the internet connection appeared as a public network so that streaming of media was hopefully diverted to the non internet wireless adapter.I want a faster way of transferring large video files from my laptop to my desktop. I recently bought a crossover cable to do this through direct connection.Both use the same user name and password as well as run the same win 7 pro however the desktop is the 64 bit version. I set up both ipv4 with the same addresses.When it has worked I am only getting a connection speed of just over 10mb and once I connect the crossover cable between the computers it knocks out my internet connection on the wireless card.
View 5 Replies View Related