How To Setup A Network Provider
Feb 22, 2011how do set up a network provider so i can send and receive E-MAIL i use XP
View 1 Replies
ADVERTISEMENT
Wireless :: Cannot Get Printer To See Provider In Setup
Oct 13, 2011using t-mobile dongle on laptop to get internet but hp printer wont see provider in setup.
View 1 Replies View RelatedTP-Link 3G/3.75G Router :: TL-MR3420 / Setup Info For Service Provider?
Mar 15, 2013Region : Austria
Model : TL-MR3420
Hardware Version : V1
Firmware Version :
ISP : orange.at
When I first installed the router I used the built-in provider settings for "ONE" which used to be the name of the provider before it was taken over by orange.at. It seemed to work fine but I experienced some funny server errors with certain web services. I contacted orange.at about this and they told me to adjust the provider settings in the router as follows:
Dial number: *99#
APN: fullspeed
The reason for the problems was that they use different proxy servers for their services and applications. Now it works fine (so far).
Get Own Network Connection Internet Provider Is Century Link?
Apr 9, 2012ok when i'm playing my xbox 360 my brothers sister and my dad are on computers playing games and watching netflix and i lagg alot is there any way i can get my own network connection my internet provider is century link.
View 3 Replies View RelatedLinksys Wireless Router :: EA4500 Local IP Of Provider Network?
Aug 3, 2012In the settings menu, there is no l2tp in which it was possible to configure a local address of the router. It should be: 10.155.41.41There is an option only for VPN server setup(10.255.255.254), but where it takes a local address that my provder has gave me? - it is not clear. At the same time in the status of the router receives a DNS correctly and the second address embarass me little bet DNS should be:
1) 80.252.130.253
2) 80 252.130.254
first dns is correct, and second one looks like: 80.252.45.86Maybe he does not take a local setting of ip adress via DHCP?
DNS Server May Not Be Available - Contact Provider
Jun 6, 2012I have a Time Warner modem/router. There are a ton of different devices constantly being connected/disconnected to our router - itouches, computers, smartphones etc.
The problem started with my otherwise super reliable HP g42 (i3) laptop. Nothing would solve the issue other than recovering it back a few days to when the issue wasn't happening. But then it would happen again after a few days. All other devices would connect without issue.
Time warner's technical troubleshooting consists of "unplug the router for 10 seconds and then plug it back in. Did that work?"
So now, my son gets his first computer and I bring it home last night. Also an HP (pavillion -i3). Same deal. At first, it connects fine and dandy. Then after about 2 hours it get the ol' "won't connect - diagnose the problem?" After diagnose, it says "DNS server may not be available.
Here's the thing: Both computers connect immediately and without issue to my smartphone wireless tether.
Get IP Address To Be Able To Use Internet Provider?
Nov 18, 2011My internet service is telling me all of a sudden that my computer has no IP address for my laptop to connect to the modem?? The laptop was given to me so I have none of the disks or anything. How do I get an IP address to be able to use my internet provider?
View 2 Replies View RelatedFree Dynamic DNS Provider?
Dec 17, 2012What's the best free dynamic DNS provider?
I found a ton of them on the internet but I'm not sure which ones are safe.I'm trying to use my home NAS as an ftp server that can be accessed remotely.
Connect Two Dsl Connection With 2 Different Provider?
Nov 16, 2012who to connect two dsl connection with two different provider
View 1 Replies View RelatedCisco :: Service Provider Blocking VPN?
Feb 5, 2013"The service provider in your current location is restricting access to the InternetYou need to log on with the service provider before you can establish a VPN session. You can try this by visiting any website with your browser."We are using an Internal IP....and the external, same resultI am the IT Admin and this was working last week till I upgraded to the newer anyconnect. Internet is just fine....I am at a loss.
View 7 Replies View RelatedComputer Looking For Wrong Service Provider
Feb 25, 2012My folks have Time Warner (Roadrunner) Internet service. They power-down their Dell every night. When they shut down last night they had no problems and were running Time Warner (Roadrunner). When they booted the computer this morning the computer is trying to connect to Adelphia.
They changed nothing. The wiring to the computer was not compromised in any way.
Time Warner tried to "ping" their modem and could not "see" the modem. They think it is a line problem - but the fact that the computer is looking to connect to an alternate service provider makes me think that it is possibly a problem with a setting in the computer.
Switching Internet Service Provider On ISA
Sep 10, 2012I have Windows 2008 server running isa server with dedicated ip (which I take from my Internet Service Provider ISP) running my website, if my internet connection is down my website is not accessible from outside world.How can I switch to another ISP using same dedicated ip address when my ISP connection is down?
View 1 Replies View RelatedWNDR3400v2 - Add A Different Dynamic DNS Service Provider?
Jul 22, 2012I have DNS setup through No-IP.com. How do I add this service provider to my WNDR3400v2 router? It only has DynDNS.org listed and I can't create a free account there.
View 1 Replies View RelatedTZ-210 - Configuring Static IPs From Two Different Service Provider
Mar 27, 2012how to separate two different static Ip address provided by different service provider in Sonic wall TZ-210
View 6 Replies View RelatedProtocols / Routing :: Who Is Your Internet Service Provider
Sep 4, 2012Is this a wired or wireless connection issue? Both Who is your Internet Service Provider (ISP)? Comcast..What type of Broadband connection are you using? Cable..What is the exact Make and Model of your Modem, Router or Modem/Router Combo - (Main)Netgear WNR3700v2 / WNR2000v3(secondary) My current setup is the 3700 router is taking the internet from the modem cat5e and spewing the wireless. I would like to have the secondary router use the wireless from router 1 as the internet source and push the internet out of the 4 hardline ports so I can plug my upstairs xbox 360 into the router via cat5e. I'm just kinda new to this and still learning so I'm not sure how to configure the router to do this. I can get into the settings of the router just fine but finding the right settings to tweak is a little difficult.
View 3 Replies View RelatedHow To Find The Number Of Connections Allowed By Provider
Apr 9, 2012The address of my server, as a url, not the IP Address. I already have that, and how to find the number of connections allowed by my provider, which is clearwire.
View 8 Replies View RelatedCan Ip Provider Change Wifi Connection And Settings
Jan 11, 2011we are charter High speed customers and just recently upgraded are connection speedHowever today my sisters netbook wireless connection stopped working. My DS wifi connection is also dead now In the past the the wireless network name was wifi-****** but now its called wireless and the wep key no longer works
View 5 Replies View RelatedCisco :: 3600 Connection With Service Provider
Jul 9, 2012I have currently a Cisco 3600 router, it has three interfaces (all ethernet interfaces only).We being a client, our requirement is, we want two links one being the primary and one secondary for the fail over.My ISP has done certain configurations, but I am so puzzled what really has been done. I asked with them and they told that they have provided us one public IP 202.166.217.248 via Fibre--> Media Converter-->Ethernet 0/0.At the same time, they have given us a pool of addresses of the network 202.166.216.48/29 through the interface Ethernet 2/1.And we have used all the available public IPs in the server farm.They have told that, for the failover purpose via wireless, they have even used an IP address 202.166.213.114/25.
Now, where my confusion lies is, cant they provide the pool address via fibre? What is the significance of the ip that has been provided via fibre? What actually is its purpose? Isn't it consuming an extra interface ?Cant we have both the primary and secondary link excluding that one additional process?Or, am not understanding the real working mechanism how ISP distribute the internet?
Cisco Firewall :: ASA5500 Add A Second Outside Connection With Second Provider
Feb 24, 2013ASA-5510, inside, outside, and some DMZ.Some services published with Static NAT - no problem.Now we need to add a second outside connection, with a second provider.Internet navigation only through the first provider (default gateway to the provider router "A").I need to publish some services ALSO through the second provider, ensuring the accessibility of both public IP addresses.I can set up the second NAT on the second interface, but the answer is ONLY to the first IP (the ISP "A", where I have the default gateway).By Cisco manual, it seems that there is a "lookup route" automatic with the return route of NAT, but it does not work.
View 6 Replies View RelatedCisco LAN :: 1921 Routers That A Provider Is Using For MPLS
Sep 30, 2012We have Cisco 1921 routers that a provider is using for MPLS. They have it configured so that all internet trafic is passed to an internal ip address that is our proxy server. However, they are pushing all of the routing rules down to the workstation which is causing the local route tables to grow to be massive in a very short time.For example, the second I ping a website, the ip address is resolved and then the route is added for the source ip address with the default gateway of the proxy server.I would have thought that all the rules would have been handled by the router and let it keep the table entries.
View 2 Replies View RelatedCisco WAN :: 1841 Can't Able To Use Different Service Provider At Same Time
Mar 4, 2012I have cisco 1841 router in my office.In that router we configured MPLS bgp with two different service provider. [code] We can't able to use the different service provider at the sametime.Cisco 1841 is support two different AS ???
View 12 Replies View RelatedCisco Routers :: Connect Through RV180W To VPN Provider
May 21, 2013I live in China. I want all of my PC's and devices to connect through the RV180W VPN Router to a VPN provider in the US so that all of my traffic is encrypted and appears to have a US IP address. I need to find a VPN Service Provider that supports the RV180W and how to configure it. I don't want to configure every PC and device, I just want them to use the VPN conneciton at the router.
View 3 Replies View RelatedCisco Wireless :: 1142N From Provider Without Configuration
Jun 6, 2012I have a question with the CAPWAP command. Typically, when I get 1142N from our provider, they have no configuration on them and all I need to do is enter 4 lines of code all starting with CAPWAP and then I have them join the controller and finish the config. This one I just received looks like it has an IOS image or configuration on it. (You can do a show run). I can: show CAPWAP - but I can not enter any CAPWAP commands. They are invalid input detected at marker. How to I get to the point where I can enter my CAPWAP commands ??
View 3 Replies View RelatedBroadband :: Internet Service Provider Doesn't Have Wifi
Nov 4, 2012I have a wired broadband connection with a modem. My internet service provider does not have Wi-Fi. Can I convert it myself into wi-fi by connecting it to a router. If possible how?
View 6 Replies View RelatedBrowser Stopped Working - Winsock Provider Catalog
Jan 19, 2011suddenly all of my browsers stoped working,with mozzila it happens nothing at all,even don't show this page cannot be displayed thing,google chrome show that kind of message,while internet explorer suggest testing conectivity and shows message that problem is winsock provider catalog.
View 3 Replies View RelatedOne Of Two Laptops Unable To Connect To Wireless After Changing Provider?
Feb 21, 2013We recently switched from cable internet to Verizon DSL since my roommate moved out and took his equipment with him. I set up the wireless router last week and got my laptop to work on the wireless connection. Now I am unable to get my boyfriend's computer to connect to it, when it never had this issue before with the previous wireless. The first day I had it set up, it said it connected, with an "excellent" connection strength, but then the status was 'unable to connect.' I was on the phone with the Verizon guy, who after doing a screen share, said it was my IP address.
So I tried resetting my IP through the CMD, with no luck. Now it doesn't even let me connect to the wireless at all. I've tried both the Intel PROSet/Wireless and the Microsoft client to connect (this is running Windows XP) and when I click 'repair' on the Microsoft client, it tells me it couldn't be corrected because it could not renew the IP address. The firewall is currently off and I removed the defunct McAfee that was never renewed anyway[CODE]
Couldn't Establish Connection With Server Of Service Provider
Aug 28, 2012My modem with single network connectivity (Type I) works fine. I tried to replace with Type II modem (with wifi- and 4 or more ports) for connectivity. I could not establish connection with the server of the service provider. I tried to replace with a different type of typeII modem. Still the same. What could be the reason?I connected the same in a different workplace to a different PC.
View 1 Replies View RelatedLinksys Wireless Router :: WRT54G V7 - Cannot Specify Service Provider
Mar 14, 2007WRT54G v7 - cannot specify service provider
View 9 Replies View RelatedBelkin Routers :: F5D7234-4 V5 Won't Work With New Internet Provider
Dec 12, 2012I just switched from an AT&T T1 ISP to Comcast cable, which supplies a motorola modem, pushing 5MBPS downstream. This modem is not recognized by the router, a Belkin wireless G model, F5D7234-4 V5. After numerous attempts to restart both the modem and the router, the modem light does not turn on, nor is a wireless connection recognized by my computer, a new Macbook Pro. The router worked fine with the AT&T connection.
View 1 Replies View RelatedCisco Routers :: How To Configure RV042G For One Internet Provider
May 1, 2013Just bought a router RV042G for company. Why does the router configuration requires two IP addresses for the two ISPs. What if we only have one ISP? How should i correctly configure router for one ISP (internet provider)
View 3 Replies View RelatedCisco Firewall :: Way On Pix 515E To Have One Internet Provider Be Preferred Over Other
Jul 6, 2011in a week or two we are going to put in a secondary internet connection. Is there a way on a pix 515E to have one internet provider be preferred over the other and if the primary fails then the secondary will take over?
View 3 Replies View RelatedCisco VPN :: Configure L2L VPN Tunnel To Service Provider Using ASA 5505
Jun 3, 2012I am trying to confgure a L2L VPN tunnel to a service provider using an ASA 5505.My problem is that the service provider will not accept traffic from a LAN subnet, they will only accept traffice from a public IP.We have a small public subnet of x.x.x.50/255.255.255.248, our public IP (outside interface IP on the ASA 5505) is x.x.x.50 and the service provider wants to see traffic coming from us on x.x.x.51How can I NAT our LAN subnet (10.0.0.0/24) to one public IP (x.x.x.51)?
View 14 Replies View RelatedCisco Switching/Routing :: 2911 - Dynamic IP From Provider
Feb 19, 2013connected DSL directly to 2900 series router , but as DSL public IP is not static (dynamic) its difficult to access Router when out of home, any other means to access router without static IP
View 2 Replies View Related