Cisco :: 3600 Connection With Service Provider
Jul 9, 2012
I have currently a Cisco 3600 router, it has three interfaces (all ethernet interfaces only).We being a client, our requirement is, we want two links one being the primary and one secondary for the fail over.My ISP has done certain configurations, but I am so puzzled what really has been done. I asked with them and they told that they have provided us one public IP 202.166.217.248 via Fibre--> Media Converter-->Ethernet 0/0.At the same time, they have given us a pool of addresses of the network 202.166.216.48/29 through the interface Ethernet 2/1.And we have used all the available public IPs in the server farm.They have told that, for the failover purpose via wireless, they have even used an IP address 202.166.213.114/25.
Now, where my confusion lies is, cant they provide the pool address via fibre? What is the significance of the ip that has been provided via fibre? What actually is its purpose? Isn't it consuming an extra interface ?Cant we have both the primary and secondary link excluding that one additional process?Or, am not understanding the real working mechanism how ISP distribute the internet?
View 1 Replies
ADVERTISEMENT
Aug 28, 2012
My modem with single network connectivity (Type I) works fine. I tried to replace with Type II modem (with wifi- and 4 or more ports) for connectivity. I could not establish connection with the server of the service provider. I tried to replace with a different type of typeII modem. Still the same. What could be the reason?I connected the same in a different workplace to a different PC.
View 1 Replies
View Related
Feb 5, 2013
"The service provider in your current location is restricting access to the InternetYou need to log on with the service provider before you can establish a VPN session. You can try this by visiting any website with your browser."We are using an Internal IP....and the external, same resultI am the IT Admin and this was working last week till I upgraded to the newer anyconnect. Internet is just fine....I am at a loss.
View 7 Replies
View Related
Feb 25, 2012
My folks have Time Warner (Roadrunner) Internet service. They power-down their Dell every night. When they shut down last night they had no problems and were running Time Warner (Roadrunner). When they booted the computer this morning the computer is trying to connect to Adelphia.
They changed nothing. The wiring to the computer was not compromised in any way.
Time Warner tried to "ping" their modem and could not "see" the modem. They think it is a line problem - but the fact that the computer is looking to connect to an alternate service provider makes me think that it is possibly a problem with a setting in the computer.
View 1 Replies
View Related
Sep 10, 2012
I have Windows 2008 server running isa server with dedicated ip (which I take from my Internet Service Provider ISP) running my website, if my internet connection is down my website is not accessible from outside world.How can I switch to another ISP using same dedicated ip address when my ISP connection is down?
View 1 Replies
View Related
Jul 22, 2012
I have DNS setup through No-IP.com. How do I add this service provider to my WNDR3400v2 router? It only has DynDNS.org listed and I can't create a free account there.
View 1 Replies
View Related
Mar 27, 2012
how to separate two different static Ip address provided by different service provider in Sonic wall TZ-210
View 6 Replies
View Related
Mar 4, 2012
I have cisco 1841 router in my office.In that router we configured MPLS bgp with two different service provider. [code] We can't able to use the different service provider at the sametime.Cisco 1841 is support two different AS ???
View 12 Replies
View Related
Sep 4, 2012
Is this a wired or wireless connection issue? Both Who is your Internet Service Provider (ISP)? Comcast..What type of Broadband connection are you using? Cable..What is the exact Make and Model of your Modem, Router or Modem/Router Combo - (Main)Netgear WNR3700v2 / WNR2000v3(secondary) My current setup is the 3700 router is taking the internet from the modem cat5e and spewing the wireless. I would like to have the secondary router use the wireless from router 1 as the internet source and push the internet out of the 4 hardline ports so I can plug my upstairs xbox 360 into the router via cat5e. I'm just kinda new to this and still learning so I'm not sure how to configure the router to do this. I can get into the settings of the router just fine but finding the right settings to tweak is a little difficult.
View 3 Replies
View Related
Jun 3, 2012
I am trying to confgure a L2L VPN tunnel to a service provider using an ASA 5505.My problem is that the service provider will not accept traffic from a LAN subnet, they will only accept traffice from a public IP.We have a small public subnet of x.x.x.50/255.255.255.248, our public IP (outside interface IP on the ASA 5505) is x.x.x.50 and the service provider wants to see traffic coming from us on x.x.x.51How can I NAT our LAN subnet (10.0.0.0/24) to one public IP (x.x.x.51)?
View 14 Replies
View Related
Nov 4, 2012
I have a wired broadband connection with a modem. My internet service provider does not have Wi-Fi. Can I convert it myself into wi-fi by connecting it to a router. If possible how?
View 6 Replies
View Related
Mar 14, 2007
WRT54G v7 - cannot specify service provider
View 9 Replies
View Related
Dec 19, 2012
How to configure load balancing in MPLS between two different service provider.
View 4 Replies
View Related
Mar 15, 2013
Region : Austria
Model : TL-MR3420
Hardware Version : V1
Firmware Version :
ISP : orange.at
When I first installed the router I used the built-in provider settings for "ONE" which used to be the name of the provider before it was taken over by orange.at. It seemed to work fine but I experienced some funny server errors with certain web services. I contacted orange.at about this and they told me to adjust the provider settings in the router as follows:
Dial number: *99#
APN: fullspeed
The reason for the problems was that they use different proxy servers for their services and applications. Now it works fine (so far).
View 1 Replies
View Related
Feb 7, 2013
So I have a 2600 that I have configured three sub interfaces on. FA0.0.1 is set for DHCP and supports VLAN 1. FA 0/0.2 for Voice, FA 0/0.3 for Data. I have this router interface plugged into FA 0/24 on my 3550 and the 3550 is configured as a dot1Q trunk (I have attached configs for RTR and SW).I have most ports configured as access VLAN 1 which is where i have my ISP connection plugged FA0/1 on the 3550. When I connect the service provider link FA0/0.1 never picks up an address. If I take my internal DHCP server and connect it to FA0/1 of the 3550 it snags an address almost immediately.In my mind this validates that my config is fine. I also took the same cable from the service provider cable modem and connected it to my laptop and the laptop is pulling DHCP.
View 4 Replies
View Related
Sep 3, 2010
If I have a wireless network set up with the Linksys E1000 using one internet provider and then change the internet provider service to someone else, do I have to reset up the network or is it simply a matter of connecting the new internet service to the router?
View 3 Replies
View Related
Jan 24, 2011
We have multiple sites that are linked via MPLS (L3) circuits. We have good size circuits for Internet at two main sites (HQ and QC) and smaller sites come to HQ site to go to internet. We are running ospf (Cisco L3 switches) with service provider (ME3400) at these two main sites and service provider then redistributes routes back into MPLS via BGP and then smaller sites ME3400 learn these routes. i am injecting default routes from HQ and QC, but Telco is only redistributing default from HQ. So large pipe Internet at QC is not being used effeciently. Also if MPLS at HQ fails, then we are told, we need to call Telco and they will make change in their network to now start distributing default from QC.it was my understanding that telco can use BGP communities and advertize one default as prefered and second with higher cost, so that failover can occur automatically. And that they can also set up so that west cost sites use HQ and east cost sites can use QC for going to internet, but they say it is not possible.it the least, can I do something like this at my end for failover for internet, in case MPLS at HQ goes down (soon we will be setting up a point to point VPN tunnel between HQ and QC so that MPLS failure at HQ will trigger advertisement of HQ routes over tunnel via QC into MPLS, so other sites can then come to HQ thru QC over this tunnel. At QC Cisco router (to detect loss of default route from HQ and then start advertizing default from QC)
router ospf 1
default-information originate always route-map From_HQ
exit
ip access-list standard From_HQ
[code]....
View 3 Replies
View Related
Jan 21, 2013
I have a port on 7600 connecting via Single Mode Fibre to my service provider. Service provider has 1000-Full with auto-negotiate. I am seeing following output on my 7600. [code] if this interface is only capable of doing 1000Mb, how come it is showing 100-Full. If I change to nonegotiate option (both my side and provider side), link goes down. My provider has confirmed they have 1000Full their side.
View 2 Replies
View Related
Nov 16, 2012
who to connect two dsl connection with two different provider
View 1 Replies
View Related
Feb 24, 2013
ASA-5510, inside, outside, and some DMZ.Some services published with Static NAT - no problem.Now we need to add a second outside connection, with a second provider.Internet navigation only through the first provider (default gateway to the provider router "A").I need to publish some services ALSO through the second provider, ensuring the accessibility of both public IP addresses.I can set up the second NAT on the second interface, but the answer is ONLY to the first IP (the ISP "A", where I have the default gateway).By Cisco manual, it seems that there is a "lookup route" automatic with the return route of NAT, but it does not work.
View 6 Replies
View Related
Jan 11, 2011
we are charter High speed customers and just recently upgraded are connection speedHowever today my sisters netbook wireless connection stopped working. My DS wifi connection is also dead now In the past the the wireless network name was wifi-****** but now its called wireless and the wep key no longer works
View 5 Replies
View Related
May 22, 2012
We are connected to 2 different providers (PROV01 and PROV02) with eBGP full internet tables. PROV01 routes have higher local preference over PROV02.
We are having problems with our provider and would like your expertise. PROV01, higher preference has been having trouble with their router. The BGP remains up but the router stops forwarding traffic. as a resulta we lose connection to the internet but our traffic never goes to PROV02 since PROV01 BGP remains up announcing the 400K routes to us.
Is there a way to test internet connection though PROV01 and as the "internet is DOWN" automatically change traffic to PROV02? Can BGP parameters changes be triggered by IP SLA? Our router is an ASR1006 RP2.
View 11 Replies
View Related
Apr 9, 2012
ok when i'm playing my xbox 360 my brothers sister and my dad are on computers playing games and watching netflix and i lagg alot is there any way i can get my own network connection my internet provider is century link.
View 3 Replies
View Related
Oct 11, 2011
I have a dual wan router with a main cable modem for high speed and a backup adsl modem hooked just in case. The problem is that quite often it seems that my ISP loose his connection to the internet but communication is not lost between my ISP and my modem and router. Because of this, my router doesn´t do the automatic changeover from my WAN 1 to my WAN 2 hooked slower ADSL modem. My router has the ping to keep alive option checked on the WAN 1 setings using my Cable ISP provided IP address.How can I force my router to notice that my cable ISP lost his connection to the internet and do right away the changeover from his WAN 1 to his WAN 2 input?
View 1 Replies
View Related
Sep 7, 2011
What are my best options to secure branch office connection to HQ over Provider MPLS cloud. Our existing Setup
<<HeadQuarter>> :: DataCenter hosting Email, ERP, Intranet, Voice Services 10mb link to Service Provider over MPLS CloudMPLS is terminated on a 3825 Router running advance Services
<<BrancOffice>>::Total 10 In Country Branch Offices2mb Link to Service Provider over MPLS CloudTotal users in each branch : 20 MPLS is terminated on a 2811 Router running advance Services
View 1 Replies
View Related
Feb 2, 2013
Region : Germany
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 120820
ISP : German university ISP
I have a big problem with several TP-Link routers (WDR3600, WR1043ND, WR741ND), always with the latest firmware and also with older ones. After a day or so, my internet & network connection will drop all of a sudden and all the routers need a reboot. There is no indication on what provoces these lock-ups. The routers can handle heavy traffic (bittorrent /w 100s of connections) but will stop working when browsing casually. The web-GUI will become unreachable. No pings to the outside are possible anymore, not even to direct IPs (8.8.8.8 for example). No pings to devices in the same network are possible either.
View 7 Replies
View Related
Apr 5, 2012
For some reasons my laptop "lost a wireless connection to the internet. Basically each time I try to connect I get the following message "The window wireless service is not running on this computer.On the other hand If I connect directly to the modem I get internet connection.
View 8 Replies
View Related
May 16, 2011
When I create a service object or group and add the object to a new rule it never works.I mean the traffic match not the rule. I see not hits.I placed the rule on top of my access list to check if I do somethink wrong but it is not working. When I place only a service for example tcp/23 it is working.
my ip service object
object-group service g-as400 description access client 2 as400 machine service-object tcp-udp destination eq 397 service-object tcp destination eq 137 service-object tcp destination eq 2001 service-object tcp destination eq 3000 service-object tcp destination eq 445 service-object tcp destination range 446 447 service-object tcp destination eq 449 service-object tcp destination eq 5010 service-object tcp destination eq 5544 service-object tcp destination eq 5555 service-object tcp destination range 8470 8476 service-object tcp destination eq 8480 service-object tcp destination eq
[code]...
View 8 Replies
View Related
May 14, 2011
Windows 7 with wireless adaptor connection
I switched to Win. 7, because XP getting slow in general. I've using the brand new Netgear wireless adaptor on Win.7 while the older wireless adaptor is still on XP, but I never use XP after switch to Win.7.
On XP, Wireless connection had no issue at all, however on Win.7, the wireless connection often saying 'not service available' at the right bottom corner.
On XP, Netgear was 150 and Win 7 is 300.
Just wonder whether I should take off the wireless-adaptor from the XP if that would work to boost the wireless connection on Win.7?
View 1 Replies
View Related
Feb 5, 2013
Since a few days, when I go on Web with my cable connection, the pages of sites stay on a blank page and that does not connect. Having made diagnose, I had the following message:The distant ring road(peripheral) or the resource does not accept the connection.The ring road(peripheral) or the resource [URL] is not configured to accept the connections on the port " Web Service (HTTP) ".I phoned at my FAI ( Videotron) and having discussed for a long time, it happened at the conclusion that it was a problem of router (when I connect the computer directly on the modem, that works very well).Of an other one quoted(esteemed), a connection Wireless telegraphy works with no problem at all, fortunately because I shall not be here.I am to go to my router D-Link Dir-835 and I returned to the former(old) protection(saving) of the configuration. And now that re-works again. But the enjoyment was short-lived because this morning, the problem returned.What do you think about it? I Should make a reset of my router even if it means re-configuring everything again?
[URL]
View 2 Replies
View Related
Feb 28, 2012
We have a situation where services are stopped on the real servers. The probes fail and we confirm the services are not running on the server. We cannot access the ports from the ACE directly. We can still however acces the VIP on the TCP port (L4 VIP class-map). So we can still telnet to the VIP on the port from thr Client side of the network.This is on ACE 20 Modules deployed in Routed mode. The version of software is A2(3.3).
Tried removing multi-match and loadbalance policies as well as class-map and re-applying then re-appyling the service policy to interface. Same behavior,This is a problem at another level as some services are being monitored by GSS via TCP keep-Alive and this obviuosly causes a problem as the service then never goes off-line.
View 10 Replies
View Related
Sep 14, 2011
How to merge two Internet connection services to one faster Internet connection service?
View 3 Replies
View Related
Sep 16, 2011
I have a work computer...Dell Latitude 6400, AT&T Global Network Client (Company VPN service), using Novatel USB551L from Verizon, with their new 4G LTE. First connect to Verizon, then it automatically launchs ATT Global Network Client, once connected, the system automatically maps drives. I stay on for about 15 minutes average to 40 minutes that's when the Verizon drops/disconnects. This consistantly happens throughout the day!
1. If I connect to a "local" wireless signal NO dropping.
2. If I tether my Sprint Android, NO dropping.
Only dropping with the Verizon. I MUST have the Verizon dedicated to this work computer to run the VPN and hopefully (very soon) a mandated VOIP with Avaya!Called Verizon- they sent me a new USB thinking that might fix it. But same thing. They are showing signal strength 4G. Nothing on their side.
View 1 Replies
View Related
