Cisco Firewall :: ASA 5510 / Ip Service Object And Service Group

May 16, 2011

When I create a service object or group and add the object to a new rule it never works.I mean the traffic match not the rule. I see not hits.I placed the rule on top of my access list to check if I do somethink wrong but it is not working. When I place only a service for example tcp/23 it is working.
my ip service object
object-group service g-as400 description access client 2 as400 machine service-object tcp-udp destination eq 397 service-object tcp destination eq 137 service-object tcp destination eq 2001 service-object tcp destination eq 3000 service-object tcp destination eq 445 service-object tcp destination range 446 447 service-object tcp destination eq 449 service-object tcp destination eq 5010 service-object tcp destination eq 5544 service-object tcp destination eq 5555 service-object tcp destination range 8470 8476 service-object tcp destination eq 8480 service-object tcp destination eq


View 8 Replies


Cisco Firewall :: Object Group Network Limit With Asa 5510

Oct 29, 2012

We have Cisco ASA 5510, I am about to add another 2 Objectgroup network  groups on the firewall to our already growing list. Under this Object-group Network xxxx , we are planning to add about about 500 network-object host . This objectgroup will then be applied to an ACL. Just wanted to know if thats possible - meaning addnig 500 hosts? If it is whats the limit?
Also are there any other things to keep in mind before i go-ahead with this huge object group?

View 3 Replies View Related

Cisco Firewall :: 5520 - Object-group With Network-object Containing IP Address Range

Apr 7, 2013

Does the ASA treat an object-group with a network-object containing a range of IP addresses as a netmask? For example, I can apply this configuration without the ASA throwing any errors though the configuration calls for a 'net mask':
object-group network test
network-object-group mode commands/options:
A.B.C.D  Enter an IPv4 network mask
sh run ob id test
object-group network test
I found that in the documentation it requires a netmask as oppose to a range. Is this a bug in the code? I am running code version 8.0(5)23 on a 5520. If this is not a bug how does the ASA treat this type of configuration when applied to an access list? When I ran a quick packet trace and denied access from that range it looks like the ASA doesn't read that configuration properly.

View 5 Replies View Related

Cisco Firewall :: Negative Counters In ASA 5510 (show Service-policy)

Feb 7, 2012

In my Cisco ASA 5510 in release 8.2, I have an extrage behavior in the output of "show service-police" command. The issue is that I create a class-map to limit trafic in one of ASA interfaces and I applied in a service policy. This is the configuration: 
access-list ACL-Limitada extended permit ip host srv-proxy any
access-list ACL-Limitada extended permit ip any host srv-proxy
access-list ACL-Limitada extended permit tcp any eq ftp-data
access-list ACL-Limitada extended permit tcp any eq ftp
access-list ACL-Limitada extended permit tcp any eq ftp-data
access-list ACL-Limitada extended permit tcp any eq ftp


View 1 Replies View Related

Cisco Firewall :: ASA 5510 / Blocking / Shunning Hosts With Service Policy Rules?

Dec 20, 2012

I have an ASA 5510 deployed and we are getting a tonne of port scanning traffic (who isn't these days) and ping traffic.The threat scanning thresholds seem a bit too high and was wondering if there is a way to use a Service Policy Rule to perform a Shun/Block of the hosts rather than the firewall simply blocking the request via the ACL and sending a reply.
In other words, if I do nothing, I know the ACL is protecting the resources but it is still replying to the client connection. I want the end result to be the same as a "Shun" where the connection is dropped and no reply is sent. how to employ Service Policy Rules to thwart Port Scanning and/or IP Spoofing? 

View 2 Replies View Related

Cisco Security :: ASA 5510 Object-group And Range Option

Feb 6, 2013

I have 3 ASA 5510s; two of which are in production and the 3rd one is new. I inherited the two in production and was trying to configure that 3rd one using some of the existing object-group network statements.  The problem is that when I try to create a range of IPs in one of the object-groups; the range command is not available. Here is one of the statements extracted from one of the production ASAs:  object network REMOTE range ASAs have the same image ver (asa842-k8).  Is there something that I am missing to be able to enable the range option on the new ASA?

View 2 Replies View Related

Dependency Group Or Service Has Failed Vista

May 18, 2012

My connection status icon has a big red x on it. I can't get on the internet. I tried the cmd stuff( ipconfig,netsh renewand release, and all the other jazz to do) my ip address starts with a 169 # I know that's not good. I go into my networks and I have no network. I go into my LAN ip4 and ip6and there are no addresses no were.I checked the LAN area status and it says not connected.

View 8 Replies View Related

Windows 8 Pro - The Dependency Service Or Group Failed To Start

Feb 23, 2013

I've been working on my laptop recently, once finished i turned my computer off like most people do. After turning it back on hours later, i noticed that my laptop was connected to the internet router but had limited access which ment i could'nt get onto the internet ! So when I went onto Network and sharing center and nothing came up apart from ''the dependency service or group failed to start'' ...I don't want to use system restore or reset tools of windows

Current OS: Windows 8 PRO
Model: ASUS K43SV

View 1 Replies View Related

Dependency Service Or Group Failed To Start - Error 5

Jul 20, 2011

DHCP Client and Network Location Awareness aren't working. When I tried to start DHCP Client, I got Windows could not start the DHCP Client service on the Local Computer.Error 5: Access is denied. I checked the dependencies and all of them were on. For Network Location Awareness, I got the error Windows could not start the Network Location Awareness on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service cendor, and refer to service-specific error code -1073741288. One of its dependencies is fine, but I don't know how to check the other two, Ancillary Function Driver for Winsock and NetIO Legacy TDI Support Driver. Also, how do I check the event log?Everything on the list that was said to check is running expect these two the lisie was having problems with. I have not had anything with memory recently and have not been able to successfully go through a system restore. I have tried many of the suggestions and just am not sure what to do anymore. The computer works perfectly fine, minus it cannot get on the internet.

View 1 Replies View Related

Cisco Application :: ACE 20 Service-policy Out Of Service / Still Able To Connect To VIP

Feb 28, 2012

We have a situation where services are stopped on the real servers. The probes fail and we confirm the services are not running on the server. We cannot access the ports from the ACE directly. We can still however acces the VIP on the TCP port (L4 VIP class-map). So we can still telnet to the VIP on the port from thr Client side of the network.This is on ACE 20 Modules deployed in Routed mode. The version of software is A2(3.3).
Tried removing multi-match and loadbalance policies as well as class-map and re-applying then re-appyling the service policy to interface. Same behavior,This is a problem at another level as some services are being monitored by GSS via TCP keep-Alive and this obviuosly causes a problem as the service then never goes off-line.

View 10 Replies View Related

Cisco Firewall :: 5510 Vpn Client Groups Configured / DHCP Server Stops Giving Network Service

Feb 20, 2013

I have a asa 5510 vpn client groups configured and connected to the internal network DHCP server stops giving network service dhcp and the network goes down.

View 6 Replies View Related

Cisco :: Topology Service In LMS 4.0 / ANIServer Service May Be Down

Mar 25, 2013

I have a fresh installation of LMS 4.0 on windows server 2003, when i click to open topology i get error message : ANIServer service may be down or Host name isn't DNS resolvable
i tried pdshow -brief ANIServer ===> service UP

DNS is working using host file in driversetc i restarted the server

restared the crmdmgtd
unistall / install java plugin
pdterm ANIServer
pdexec ANIServer
NO change ..

View 6 Replies View Related

Cisco Application :: 3945 - WCCP Redirection For WAAS On Same Platform Using Different Service Group?

Nov 9, 2011

if a Cisco router or switch can handle wccp redirection enabled for both waas and some other web content filtering appliance using a different service group?
seems like the priority value would come into play determining which service group gets handled first?
we currently do WCCP for WaaS on our 3945s.
I am going to advocate to my customer that we separate this out for CPU load issues, config complexity issues, IOS issues, etc... but the question is going to come up - "can we do WCCP for different applications on our Catalyst 3750 core switch, or our 3945 WAN routers?"

View 2 Replies View Related

Computer Won't Detect Ethernet Cable - Dependency Service Or Group Failed To Start

Mar 7, 2012

My roommate and I are trying to set up the internet, but my computer won't detect the Ethernet Cable. Whenever I go to Network and Sharing Center and try connecting to the internet, the computer simply says "Windows did not detect any networking hardware", even though the light is clearly on and should be working. The cable is also new so it should be fine. I've also been looking around on the internet a bit, and in trying to fix the problem it looks like some of my Services are turned off, which seems to be causing the problem. However, whenever I try and turn them on, I get an error message saying "The dependency service or group failed to start".

View 5 Replies View Related

Cisco Firewall :: Internet Access Through ASA 5540 For Specific Network Object Group

May 2, 2011

I have a 5540, and i am trying to allow access to internet for an specific network object group, who has inside a bunch of users, who needs direct internet access without any restrictions, i have tried with dynamic NAT, but that configuration ask for a specific IP o a Network range, and is not permitted to configure an  object group as a source
The group is located in LAN zone, so a permission from one zone to another zone is needed i think, but i can allow the internet acess to that group Is there another way to get that , different from NAT ?

View 5 Replies View Related

Cisco VPN :: 5510 VPN Filter And Service From Remote Clients

Mar 21, 2012

We have remote VPN setup with Cisco ASA 5510. By using VPN filter, I can follow the guide and make client to use all necessary server services. (dns, ssh etc). However, is there any way that allow inside server access remote VPN client's services, ex. let inside server ssh to remote VPN client? Consider remote access VPN filter ACL's syntax, I have to always let source be the "remote VPN client PC", the dest is "inside firewall server", how can I let the other way traffice going?

View 1 Replies View Related

Cisco Firewall :: ASA 5510 Object Groups / Creating New ACL

Jul 20, 2011

I have an ASA5510 where I have defined object-groups and then associated them with a specific ACL.  Our ISP is pulling their point of presence from where I live and I am force to move to a new ISP.  I am in the process of setting up another interface for the ASA5510 to connect to the new ISP.
My questions is can I create a new ACL lets call it new_access_in and use it with the same object groups that I have already defined?  I know that I can only have one ACL bound to an interface, and will bind this new ACL to the new interface I am setting up, but I wasn't sure if I could use the same object groups and connect them to a different ACL.  I really don't want to have to create new object groups if I don't have to.

View 2 Replies View Related

Cisco Firewall :: 5510 - Create Network Object For IP To NAT Through? 

Jan 30, 2012

I have recently upgraded my ASA 5510 to 8.3 code and honestly I am confused on the best and most efficient way to do many nat translations through it.  I have a group of about 100 IP's that need http/https/and sqlnet allowed through for our web farm.
I have a text file with the real and translated IP addresses and in 8.2 I could simply modify it and dump the thing in and make the NAT rules and access-lists.  Now with the new object based model I am having a hard time wrapping my brain around how to do this using as few lines of code as possible.
Do I have to create an network object for each and every IP i want to nat through? 

View 1 Replies View Related

Cisco Firewall :: ASA 5510 Object-Groups Not Working

May 9, 2012

I have an ASA 5510 and have just started using object-groups which are super handy in theory, but not working in reality. I have a service object-group with a mix of tcp, icmp, and udp ports. Let's call it Sample_Port_Group. I'm trying to apply it to my dmz_access_in ACL. Here's the line giving me problems:
access-list dmz_access_in extended permit object-group Sample_Port_Group any
The asa throws up an error between and any. When I put up a ? after Sample_Port_Group, it gives me the option of putting in an IP address, any, etc. When I put in a ? after, it only gives me the option of putting in an IP address.URL

Those posts gave me the impression my line was possible, especially the "access-list outsideacl extended permit object-group myaclog interface inside any" line, which is at the end of the 2nd article linked.

View 2 Replies View Related

Cisco Firewall :: DDNS Service For ASA 5505?

Oct 23, 2012

I have found cisco's config for dynamic DNS on an ASA.  However, I have seen many articles that the ASA doesnt support the HTTP update method that most dynamic dns services use.

View 2 Replies View Related

Cisco Firewall :: ASA5520 - SSL VPN Service Groups?

Aug 12, 2012

how to change the order of the groups that are displayed at the SSL VPN sign in page? I am using an ASA-5520. Right now the anyconnect client group displays above the clientless SSL intranet group and I want it reversed.

View 6 Replies View Related

Cisco Firewall :: Understanding ASA 5505 Service Contracts?

Feb 18, 2013

I currently have 2 5505 SEC BUN as Primary/FO Firewalls and I am considering purchasing the ASA5510-AIP10-K9 for use as a dedicated IPS device.  Looking at [URL] I see that for service updates, CON-SU1-AS1A10K9 is available for this product, providing  "IPS Signature and Engine Updates" and "OS Updates."It is my understanding that in the ASA5510-AIP10-K9 there are 2 OS:

2. AIP SSM-10 OS
My question is: Are both the ASA and AIP SSM-10 able to receive "OS updates" with this service contract?

View 3 Replies View Related

Cisco Firewall :: How To Create Mixed Service Ports On ASA 8.4(2)

May 14, 2013

How to create a mixed service ports on ASA 8.4(2)?I need to create a service group which has ICMP, TCP ports and also different UDP ports.Normally you would create different service group based on TCP/UDP/TCP-UDP/ICMP/Protocol and add then to new nested service group.But I want to create a new service group where you can define everything without the need to different service groups and nesting them into a new one.

View 1 Replies View Related

Cisco Firewall :: Upgrade ASA Service Module On Cat 6504?

Mar 20, 2013

I just got 2 Cat6504 Chassis and 2 ASASM pluged in them. show version from submodule ASA as follow:

SVC-APP-HW-3#show ver
Cisco IOS Software, trifecta Software (trifecta-SP-M), Version 15.1(1)SY, RELEASE SOFTWARE (fc2)

I want to upgrade new OS for ASA to 8.5 (asa851-smp-k8.bin) but after copy this soft to the module, I can not "write" command or when I reload this box, everything was no changed. SVC-APP-HW-3#write startup-config file open failed (No such device)

View 2 Replies View Related

Cisco Firewall :: ASA5540 Can't Get DHCP Service From Outside To Inside Network

Jun 13, 2012

I have an inside network using PAT to one outside address. Our DNS server is on another local, but outside address.  I can't get the inside network to successfully get addresses.I have another inside address that just uses the wirewall and gets addresses just fine from the same server.I have the box checked in ASDN that enables DHCP on the inside interface and points to the correct DHCP server,PAT service is working properly if I use a hard coded address for a machine on the inside network.This is an ASA5540 with 8.3(2)

View 2 Replies View Related

Cisco Firewall :: 5505 With Security Plus Or 891 Integrated Service Router

Mar 15, 2011

Have a customer who has two ISPs right now and only using one through a basic SOHO router. Looking to upgrade to something that supports dual WAN and allows connections from outside in on both WAN ports. There are 25-30 inside hosts.Requirements: Allow incoming connections on BOTH WAN ports to a single inside host

-This is a web app that needs as close to 100% uptime as possible
-Round robin DNS is set up
-Failover for internal people should one of the ISPs go down
Looking at either an ASA 5505 with Security Plus or an 891 Integrated Service Router.

View 1 Replies View Related

Cisco Firewall :: ASA 5505 With Verizon Home Fios Service?

Feb 13, 2013

connecting ASA 5505 with the Action Tech Router?

View 1 Replies View Related

Cisco Firewall :: Are Both ASA5505 / AIP SSM-10 Able To Receive OS Updates With Service Contract

Mar 8, 2013

I currently have 2 5505 SEC BUN as Primary/FO Firewalls and I am considering purchasing the ASA5510-AIP10-K9 for use as a dedicated IPS device.  Looking at url... I see that for service updates, CON-SU1-AS1A10K9 is available for this product, providing  "IPS Signature and Engine Updates" and "OS Updates."
It is my understanding that in the ASA5510-AIP10-K9 there are 2 OS:

2. AIP SSM-10 OS
My question is: Are both the ASA and AIP SSM-10 able to receive "OS updates" with this service contract? Essentially, I want to make sure that when I submit by budget, there isn't another contract that I also need.

View 8 Replies View Related

Cisco Firewall :: SNMP Service Active On ASA2 With 8.3 ASA Version

Jul 3, 2012

we have two ASA (ASA2)  with 8.3 version and ASA 7.2 (ASA1) , we have SNMP service active on ASA2 with 8.3 ASA version.Usually we do SNMP request from devices behind NAT on the ASA1 to the  ASA2 SNMP service , two weeks ago suddenly we could not do request from devices behind NAT.
We check process (Sh process)  from ASA2 and SNMP is running, we run "no snmp server" , and we reconfigure it on ASA2, ACLs to access SNMP seems well, and shun table seems ok too, to finish we check with packet tracer from ASA1 to ASA2 in ASA2 wizard and it seems well.We check SNMP UDP request from ASA1 to ASA2  in ASA1 wizard with packet tracer and it seems OK.Are there any automatic traffic rule ACL on ASA to protect to from multiple request ?

View 5 Replies View Related

Cisco Firewall :: Configure ASA 5505 With TimeWarner Business Class Service

Apr 30, 2013

I'm trying to support a friend. They just switched to TWC Business Class from Megapath. They have a Cisco 5505 ASA and are trying to configure it to work with the new TimeWarner cable modem. But we can't get PCs behind the firewall out to the Internet.
We think it should be a pretty simple config. They have the ASA connected directly to the modem. The modem is running DHCP, and we''ve configured the ASA to get its address via DHCP. We have a Windows server behind the firewall; it can't get out the Internet either. It's set up to be a DHCP server and is giving IP addresses to the PCs on the network.
Laptops connected via wifi to a wireless router attached to the modem are able to connect to the internet, thus we know the modem is up and running fine.
Here's our running config:
ASA Version 8.4(1)!hostname ciscoasadomain-name opanslab.comenable password yYME2neTGgA0S1./ encryptedpasswd yYME2neTGgA0S1./ encryptednames!interface Vlan1nameif insidesecurity-level 100ip address


View 5 Replies View Related

Cisco Firewall :: ASA5510 Delete Default Service Policy Rules?

Jan 7, 2013

We have a problem with some websites being blocked every now and then. Everyone inside can access this external website for weeks, and then suddenly it's not available for a few hours, and then it comes back. All without me making any changes to the firewall, ASA5510. The external website that has nothing to do with us can be accessed from anywhere outside our network, example on my iphone through Verizon.
We have not set up any rules about blocking websites, all I found was the Default Service Policy. After backing up and then deleting the rule we are able to access all sites.

View 2 Replies View Related

Cisco Firewall :: Catalyst 6509E / Migrating From FWSM To ASA Service Module (ASASM)?

Jun 6, 2013

I'm migrating from a failover pair of FWSM modules across to a failover pair of ASA Service Modules. In order to avoid a "big bang" switchover I intend to migrate subnets from one to the other over a protracted period.With that in mind, whether there is any restriction on having FWSM and ASASM modules in the same chassis? A trawl of the relevant documentation hasn't revealed anything.In this specific case it is Catalyst 6509E VSS chassis pairs with Sup-2T.

View 1 Replies View Related

Cisco Switching/Routing :: Cat4500 With IOS-XE And Object Group ACLs

Feb 5, 2013

Any one know when object-group ACLs will be supported in cat4500 IOS-XE ?? Doesnt seem to be supported now.

View 1 Replies View Related

Copyrights 2005-15, All rights reserved