Cisco Firewall :: DDNS Service For ASA 5505?
Oct 23, 2012I have found cisco's config for dynamic DNS on an ASA. However, I have seen many articles that the ASA doesnt support the HTTP update method that most dynamic dns services use.
View 2 Replies
ADVERTISEMENT
Cisco Routers :: RV180W To Use Another Ddns Service Other In The Default
Sep 26, 2012I am trying to set up DDNS for my network. Right now there are only RV180W for DDNS providers (DynDNS, TZO, and 3322).I wanted to use a free DDNS provider, however DynDNS and TZO are now pay only (or only a short free trial via credit card). 3322 seems untrustworthy, as Google is reporting that it is a security risk?Anyway, my question is: "Is there a way I use another DDNS service other than the ones offered by default in my RV180W?"
View 0 Replies View RelatedCisco Routers :: RV042 Setup To Use DDNS Service
Sep 1, 2011I am trying to set up my rv042 to use the ddns service. The rv042 is directly connected to the ISP provided modem on WAN port 1. The problem is that instead of seeing the internet IP the rv042 is using the ISP sub net assigned IP.
LAN IP : 192.168.1.1 WAN1 IP : 192.168.12.9 WAN2 IP : 0.0.0.0 Mode : Gateway DNS (WAN1) :DNS (WAN2) : 192.168.12.1 DDNS(WAN1 | WAN2) : Off | Off DMZ Host : Disabled
Cisco Routers :: DDNS Service Configuration String RVS4000
Apr 15, 2012How to to successfully configure and connect to a DynDNS account with RVS4000? This was working fine for me until recently when I think I upgraded the firmware to 1.3.3.5.I am trying to connecting to DynDNS.org service. In the past, I used the following string for the Hostname which worked: 'mysubdomain.domain.com&system=custom' (including small quotes). According to the RVS4000 documentation, all you should have to do is specify the host name with DynDNS but this clearly is not accurate.
View 1 Replies View RelatedCisco Firewall :: Understanding ASA 5505 Service Contracts?
Feb 18, 2013I currently have 2 5505 SEC BUN as Primary/FO Firewalls and I am considering purchasing the ASA5510-AIP10-K9 for use as a dedicated IPS device. Looking at [URL] I see that for service updates, CON-SU1-AS1A10K9 is available for this product, providing "IPS Signature and Engine Updates" and "OS Updates."It is my understanding that in the ASA5510-AIP10-K9 there are 2 OS:
1. ASA OS
2. AIP SSM-10 OS
My question is: Are both the ASA and AIP SSM-10 able to receive "OS updates" with this service contract?
Cisco Firewall :: 5505 With Security Plus Or 891 Integrated Service Router
Mar 15, 2011Have a customer who has two ISPs right now and only using one through a basic SOHO router. Looking to upgrade to something that supports dual WAN and allows connections from outside in on both WAN ports. There are 25-30 inside hosts.Requirements: Allow incoming connections on BOTH WAN ports to a single inside host
-This is a web app that needs as close to 100% uptime as possible
-Round robin DNS is set up
-Failover for internal people should one of the ISPs go down
Looking at either an ASA 5505 with Security Plus or an 891 Integrated Service Router.
Cisco Firewall :: ASA 5505 With Verizon Home Fios Service?
Feb 13, 2013connecting ASA 5505 with the Action Tech Router?
View 1 Replies View RelatedCisco Firewall :: Configure ASA 5505 With TimeWarner Business Class Service
Apr 30, 2013I'm trying to support a friend. They just switched to TWC Business Class from Megapath. They have a Cisco 5505 ASA and are trying to configure it to work with the new TimeWarner cable modem. But we can't get PCs behind the firewall out to the Internet.
We think it should be a pretty simple config. They have the ASA connected directly to the modem. The modem is running DHCP, and we''ve configured the ASA to get its address via DHCP. We have a Windows server behind the firewall; it can't get out the Internet either. It's set up to be a DHCP server and is giving IP addresses to the PCs on the network.
Laptops connected via wifi to a wireless router attached to the modem are able to connect to the internet, thus we know the modem is up and running fine.
Here's our running config:
ASA Version 8.4(1)!hostname ciscoasadomain-name opanslab.comenable password yYME2neTGgA0S1./ encryptedpasswd yYME2neTGgA0S1./ encryptednames!interface Vlan1nameif insidesecurity-level 100ip address
[Code].....
Cisco Firewall :: ASA 5505 / Track How Much Time User Spends Using Service Based On Port Number
Apr 26, 2012I want to be able to gather some time metrics based on source IP, and destination port. Is it possiable to track how much time a user spends using a service based on it's port number. I have figured out how to capture all the data, and I can then look at timestamps, but I would like a better way if possible. Can this be done at the firewall, or do I need a different appliance?
View 1 Replies View RelatedCisco Firewall :: ASA 5510 / Ip Service Object And Service Group
May 16, 2011When I create a service object or group and add the object to a new rule it never works.I mean the traffic match not the rule. I see not hits.I placed the rule on top of my access list to check if I do somethink wrong but it is not working. When I place only a service for example tcp/23 it is working.
my ip service object
object-group service g-as400 description access client 2 as400 machine service-object tcp-udp destination eq 397 service-object tcp destination eq 137 service-object tcp destination eq 2001 service-object tcp destination eq 3000 service-object tcp destination eq 445 service-object tcp destination range 446 447 service-object tcp destination eq 449 service-object tcp destination eq 5010 service-object tcp destination eq 5544 service-object tcp destination eq 5555 service-object tcp destination range 8470 8476 service-object tcp destination eq 8480 service-object tcp destination eq
[code]...
Cisco VPN :: Configure L2L VPN Tunnel To Service Provider Using ASA 5505
Jun 3, 2012I am trying to confgure a L2L VPN tunnel to a service provider using an ASA 5505.My problem is that the service provider will not accept traffic from a LAN subnet, they will only accept traffice from a public IP.We have a small public subnet of x.x.x.50/255.255.255.248, our public IP (outside interface IP on the ASA 5505) is x.x.x.50 and the service provider wants to see traffic coming from us on x.x.x.51How can I NAT our LAN subnet (10.0.0.0/24) to one public IP (x.x.x.51)?
View 14 Replies View RelatedCisco Application :: ACE 20 Service-policy Out Of Service / Still Able To Connect To VIP
Feb 28, 2012We have a situation where services are stopped on the real servers. The probes fail and we confirm the services are not running on the server. We cannot access the ports from the ACE directly. We can still however acces the VIP on the TCP port (L4 VIP class-map). So we can still telnet to the VIP on the port from thr Client side of the network.This is on ACE 20 Modules deployed in Routed mode. The version of software is A2(3.3).
Tried removing multi-match and loadbalance policies as well as class-map and re-applying then re-appyling the service policy to interface. Same behavior,This is a problem at another level as some services are being monitored by GSS via TCP keep-Alive and this obviuosly causes a problem as the service then never goes off-line.
Cisco Firewall :: ASA5520 - SSL VPN Service Groups?
Aug 12, 2012how to change the order of the groups that are displayed at the SSL VPN sign in page? I am using an ASA-5520. Right now the anyconnect client group displays above the clientless SSL intranet group and I want it reversed.
View 6 Replies View RelatedCisco Firewall :: How To Create Mixed Service Ports On ASA 8.4(2)
May 14, 2013How to create a mixed service ports on ASA 8.4(2)?I need to create a service group which has ICMP, TCP ports and also different UDP ports.Normally you would create different service group based on TCP/UDP/TCP-UDP/ICMP/Protocol and add then to new nested service group.But I want to create a new service group where you can define everything without the need to different service groups and nesting them into a new one.
View 1 Replies View RelatedCisco Firewall :: Upgrade ASA Service Module On Cat 6504?
Mar 20, 2013I just got 2 Cat6504 Chassis and 2 ASASM pluged in them. show version from submodule ASA as follow:
SVC-APP-HW-3#show ver
Cisco IOS Software, trifecta Software (trifecta-SP-M), Version 15.1(1)SY, RELEASE SOFTWARE (fc2)
[Code].....
I want to upgrade new OS for ASA to 8.5 (asa851-smp-k8.bin) but after copy this soft to the module, I can not "write" command or when I reload this box, everything was no changed. SVC-APP-HW-3#write startup-config file open failed (No such device)
Cisco :: Topology Service In LMS 4.0 / ANIServer Service May Be Down
Mar 25, 2013I have a fresh installation of LMS 4.0 on windows server 2003, when i click to open topology i get error message : ANIServer service may be down or Host name isn't DNS resolvable
i tried pdshow -brief ANIServer ===> service UP
DNS is working using host file in driversetc i restarted the server
restared the crmdmgtd
unistall / install java plugin
pdterm ANIServer
pdexec ANIServer
NO change ..
Cisco Firewall :: ASA5540 Can't Get DHCP Service From Outside To Inside Network
Jun 13, 2012I have an inside network using PAT to one outside address. Our DNS server is on another local, but outside address. I can't get the inside network to successfully get addresses.I have another inside address that just uses the wirewall and gets addresses just fine from the same server.I have the box checked in ASDN that enables DHCP on the inside interface and points to the correct DHCP server,PAT service is working properly if I use a hard coded address for a machine on the inside network.This is an ASA5540 with 8.3(2)
View 2 Replies View RelatedCisco Firewall :: Are Both ASA5505 / AIP SSM-10 Able To Receive OS Updates With Service Contract
Mar 8, 2013I currently have 2 5505 SEC BUN as Primary/FO Firewalls and I am considering purchasing the ASA5510-AIP10-K9 for use as a dedicated IPS device. Looking at url... I see that for service updates, CON-SU1-AS1A10K9 is available for this product, providing "IPS Signature and Engine Updates" and "OS Updates."
It is my understanding that in the ASA5510-AIP10-K9 there are 2 OS:
1. ASA OS
2. AIP SSM-10 OS
My question is: Are both the ASA and AIP SSM-10 able to receive "OS updates" with this service contract? Essentially, I want to make sure that when I submit by budget, there isn't another contract that I also need.
Cisco Firewall :: SNMP Service Active On ASA2 With 8.3 ASA Version
Jul 3, 2012we have two ASA (ASA2) with 8.3 version and ASA 7.2 (ASA1) , we have SNMP service active on ASA2 with 8.3 ASA version.Usually we do SNMP request from devices behind NAT on the ASA1 to the ASA2 SNMP service , two weeks ago suddenly we could not do request from devices behind NAT.
We check process (Sh process) from ASA2 and SNMP is running, we run "no snmp server" , and we reconfigure it on ASA2, ACLs to access SNMP seems well, and shun table seems ok too, to finish we check with packet tracer from ASA1 to ASA2 in ASA2 wizard and it seems well.We check SNMP UDP request from ASA1 to ASA2 in ASA1 wizard with packet tracer and it seems OK.Are there any automatic traffic rule ACL on ASA to protect to from multiple request ?
Cisco Firewall :: ASA5510 Delete Default Service Policy Rules?
Jan 7, 2013We have a problem with some websites being blocked every now and then. Everyone inside can access this external website for weeks, and then suddenly it's not available for a few hours, and then it comes back. All without me making any changes to the firewall, ASA5510. The external website that has nothing to do with us can be accessed from anywhere outside our network, example on my iphone through Verizon.
We have not set up any rules about blocking websites, all I found was the Default Service Policy. After backing up and then deleting the rule we are able to access all sites.
Cisco Firewall :: Negative Counters In ASA 5510 (show Service-policy)
Feb 7, 2012In my Cisco ASA 5510 in release 8.2, I have an extrage behavior in the output of "show service-police" command. The issue is that I create a class-map to limit trafic in one of ASA interfaces and I applied in a service policy. This is the configuration:
access-list ACL-Limitada extended permit ip host srv-proxy any
access-list ACL-Limitada extended permit ip any host srv-proxy
access-list ACL-Limitada extended permit tcp 192.168.10.0 255.255.255.0 any eq ftp-data
access-list ACL-Limitada extended permit tcp 192.168.10.0 255.255.255.0 any eq ftp
access-list ACL-Limitada extended permit tcp any 192.168.10.0 255.255.255.0 eq ftp-data
access-list ACL-Limitada extended permit tcp any 192.168.10.0 255.255.255.0 eq ftp
[code]...
Cisco Firewall :: Catalyst 6509E / Migrating From FWSM To ASA Service Module (ASASM)?
Jun 6, 2013I'm migrating from a failover pair of FWSM modules across to a failover pair of ASA Service Modules. In order to avoid a "big bang" switchover I intend to migrate subnets from one to the other over a protracted period.With that in mind, whether there is any restriction on having FWSM and ASASM modules in the same chassis? A trawl of the relevant documentation hasn't revealed anything.In this specific case it is Catalyst 6509E VSS chassis pairs with Sup-2T.
View 1 Replies View RelatedCisco Firewall :: ASA 5510 / Blocking / Shunning Hosts With Service Policy Rules?
Dec 20, 2012I have an ASA 5510 deployed and we are getting a tonne of port scanning traffic (who isn't these days) and ping traffic.The threat scanning thresholds seem a bit too high and was wondering if there is a way to use a Service Policy Rule to perform a Shun/Block of the hosts rather than the firewall simply blocking the request via the ACL and sending a reply.
In other words, if I do nothing, I know the ACL is protecting the resources but it is still replying to the client connection. I want the end result to be the same as a "Shun" where the connection is dropped and no reply is sent. how to employ Service Policy Rules to thwart Port Scanning and/or IP Spoofing?
Cisco WAN :: DDNS 892 Router Behind Nat ISP
Oct 21, 2012i have a cisco 892 router that is behind a NAT/ROUTER/DHCP device of the ISP.i need to configure DDNS but i get a privat ip on the Cisco "WAN" interface. i need a local ip/port to be available from the outside.i have configured de ddns service methode (Dyndns) [code] This wil send the private ip of de "wan" interface and that wil not work. <A> in de connection string wil be my private wan ip i get from the dhcp of the ISP .... ik can add a static rout on the ISP, but can not disable the router function (like bridging....) is it possible (with script or someting, MY IP LOOKUP) that the cisco router know's his real public ip, and that this ip is used to update Ddns ?
View 4 Replies View RelatedCisco WAN :: 2800 Configuration For DDNS
Feb 6, 2013My client has about 15 public IP addresses for their WAN network. All the internal network IP will be dynamic NAT to these 15 IP addresses to communicate to Internet. Since they are dynamically NAT, if anybody want to access my client internal network from outside internet, we usually advise them to use the whole range of IP.
The modem router used to dynamically NAT these 15 IPs are Cisco 2800.
I am thinking of the configuration using WAN DDNS on this Cisco 2800 for combine these 15 IPs to a DNS name by DDNS method (or any other way beside the DDNS) so that outside people can use one DNS name instead of whole range of IP. In case there is limitation of configuration of some outside people can use only one setting instead of one whole range of IP, they still can access by using one DNS name.
How to implement this on Cisco 2800?
Cisco WAN :: 1941 - TZO DDNS Configuration
Feb 1, 2012I am trying to configure TZO DDNS on my 1941. The DDNS lines in the configuration file were provided one year ago by TZO support for a 1811W router, which was working befor i migrated to the 1941. I have attached a config file and a debug file. The unusual part of the debug file is session id 0x95. I thnk this is the format the router would use if it had been configured using CCP. I had tried CCP initially but it didnt work, so I deleted it from the configuration and used CLI instead. Session ID 0x96 is the call the router is making using the CLI configuration, as seen in the attached config file.
I am not sure where the problem is here. it appears to be logging on to TZO. It also appears that the router name is being added to the logon ID in session 0x95...ie instead of myname.net the router is sending cisco1941.myname.net ---not sure if this is relevant or not. It also appears that the update happens? At least that'w what I can garner from the log file.
Configuring The DDNS For IP Camera?
Mar 19, 2012I bought a HooToo IP Camera (HT-IP212) to monitor my garden activities from my laptop at home. Everything so far is going as normal as it shall be. The wired connection was fine and is providing steady image and video output. Question 1# is i can't figure out how to configure the wireless section. Shall I set up the DDNS for the Cam as per the instruction? Question 2# Can I monitor my garden using the laptop in my office (not the one in my house), how can i set up the procedure?
View 1 Replies View RelatedCisco Firewall :: 5510 Vpn Client Groups Configured / DHCP Server Stops Giving Network Service
Feb 20, 2013I have a asa 5510 vpn client groups configured and connected to the internal network DHCP server stops giving network service dhcp and the network goes down.
View 6 Replies View RelatedCisco WAN :: Failed DDNS Configuration 1811W
Jan 9, 2011I am attempting to configure DDNS on an 1811W, but my configuration fails. Apparently,it is not connecting to the TZO server, because when I run <show ip ddns update> in telnet, the message "update destination not available, although rh.tzo.com can be pinged. I am attaching a copy of the config file. the ip name-server entries are my IP DNS, and the url/user name/ key entry was provided by TZO support.
View 3 Replies View RelatedCisco Routers :: RV016 - No Support For TZO DDNS
Nov 26, 2011I just purchased a RV016 router, upgrading from an older Linksys router only to find out that there was no support for TZO DDNS. I have used TZO for years now and don't really want to change to another service. Any way to request this from Cisco engineers for future firmware upgrades?
View 2 Replies View RelatedDDNS Setup For Computer Networking?
Oct 25, 2011 I am trying to connect computers through internet connection.When I type the address on a browser (google chrome or mozilla) it says that the address is unreachable.[URL]"An attempted connection to 112.201.9.206:80 was refused. This typically indicates that there are no services available on that port, but that it is NOT being blocked by a firewall or your ISP."
Heres what I have done so far.
* Registered at DynDNS
* set-up/log-in DDNS on my router (D-Link WBR-2310). enter DDNS address, enter username and password.
* Set-up port forwarding (port 80(http) and port 443 (https)) on router
* open both port (80 and 443) on my computer and exmy windows firewall
D-Link DIR-655 :: Rev B. 2.00 DDNS And NTP Time Conflict?
Dec 23, 2010Hooked up this router the other day to replace my old Linksys G - which has been bulletproof for 8 years. I am now wondering if I made a mistake with this unit.
I set up DDNS - after much trial and error with dyndns it now works fine.I tried to set up NTP time function - does not work. Then I set time manually. Of course on reboot it looses the time since there is no internal time function. So I need NTP.In the course of troubleshooting I turned off DDNS and behold the NTP time function now works. I turn DDNS back on and NTP does not work.
I see no logical connection between these two functions, yet the seem to interact (or not) somehow.When the NTP is not working, on reboot the time displayed in the router is the last time that I MANUALLY set the time, even though that is grayed out since I have (supposedly) activated NTP.
If I do NOTHING to NTP and uncheck DDNS, after reboot the time is correct.I tried many different NTP servers all with the same result.Looking back on-line, I see the NTP function has been a continual problem with some folks (maybe those using DDNS?) in earlier firmware. Come on DLINK don't you think it's time to get this fixed?
Cisco Security :: IOS Router 837 - Configure DDNS / Dynamic DNS?
Aug 22, 2012I have an Internet link, connected to my Cisco Router. The package I subscribed for comes with a dynamic IP Address. I was told, if I need to remote access into the Cisco Router, I need to enable the DDNS feature. Can this be done on a Cisco Router?
View 1 Replies View Related