Cisco Routers :: RV042 Setup To Use DDNS Service
Sep 1, 2011
I am trying to set up my rv042 to use the ddns service. The rv042 is directly connected to the ISP provided modem on WAN port 1. The problem is that instead of seeing the internet IP the rv042 is using the ISP sub net assigned IP.
LAN IP : 192.168.1.1 WAN1 IP : 192.168.12.9 WAN2 IP : 0.0.0.0 Mode : Gateway DNS (WAN1) :DNS (WAN2) : 192.168.12.1 DDNS(WAN1 | WAN2) : Off | Off DMZ Host : Disabled
View 1 Replies
ADVERTISEMENT
Sep 26, 2012
I am trying to set up DDNS for my network. Right now there are only RV180W for DDNS providers (DynDNS, TZO, and 3322).I wanted to use a free DDNS provider, however DynDNS and TZO are now pay only (or only a short free trial via credit card). 3322 seems untrustworthy, as Google is reporting that it is a security risk?Anyway, my question is: "Is there a way I use another DDNS service other than the ones offered by default in my RV180W?"
View 0 Replies
View Related
Apr 15, 2012
How to to successfully configure and connect to a DynDNS account with RVS4000? This was working fine for me until recently when I think I upgraded the firmware to 1.3.3.5.I am trying to connecting to DynDNS.org service. In the past, I used the following string for the Hostname which worked: 'mysubdomain.domain.com&system=custom' (including small quotes). According to the RVS4000 documentation, all you should have to do is specify the host name with DynDNS but this clearly is not accurate.
View 1 Replies
View Related
Feb 15, 2011
my RV042 is not able to propperly update my ddns. If you try to resolve my dyndns subnet kitus-network.dyndns.org you will get 192.168.0.2. How can I make the router update my ddns with the real public ip rather than the private ip it "sees" on the WAN interface?
View 5 Replies
View Related
Oct 23, 2012
I have found cisco's config for dynamic DNS on an ASA. However, I have seen many articles that the ASA doesnt support the HTTP update method that most dynamic dns services use.
View 2 Replies
View Related
Oct 24, 2011
I was wondering if I could setup my router CIsco RV120W to be able to connect to a VPN serice for my internet connection. Looking to give my small home netwok more sercurity. Is it possible with the Cisco firmware to be able to setup a connection to VPN serice. Do I have the compabilites with this router?
View 1 Replies
View Related
Jul 11, 2012
I have an rv180 and I'm trying to setup a custom service that contains both multiple disjoint ports (some UDP some TCP), as well as a TCP port range. This has lead me to a couple of questions.1) Is it even possible to have a single custom service with disjoint ports? Is it just going to be necessary to define multiple partial services for this?2) Is it possible to forward a range of ports? It's clear how to define a service with a port range, but the port forwarding table interface only allows me to select one LAN-side port for any service. Is there a secret notation that I need to do here that will just forward to the same LAN-side port as the WAN-side port---effectively one-to-one NAT forwarding, but just for the selected service?
View 8 Replies
View Related
Apr 7, 2013
I am trying to setup the following. We have an RV042 Router and are using it as our gateway at the office. In the office we are using a Windows Domain abc.lan with DHCP of 10.0.0 - 10.0.0.254. The Router/Gateway is setup with a Static IP of 10.0.0.100.A couple of our office employees would like to work from home via VPN using their laptops. With the many options available for this router, I am not clear as to which options and what settings I should set.
View 2 Replies
View Related
Oct 13, 2012
I need DHCP Option 66 to be enabled my small business RV042 router, so the IP phones could know where is the TFTP server.
View 1 Replies
View Related
Apr 5, 2013
We are currently running Windows 2003 Domain in our network with DHCP turned on the Server. We have turned off the DHCP on the Router. We are using RV042 as out Gateway to the internet and everything is working fine. We would like to allow a couple of our users to be able to VPN into the network so that they can use Outlook and be able to access their files on the Shared Folder. The users would be using their laptops from their homes to connect via VPN using the standard Windows 7 VPN connection.
In the RV042 Interface there are many options and I am not sure I understand which setting would allow them to connect successfully to the network, be authenicated as a domain user.
View 1 Replies
View Related
Jul 12, 2009
I am trying to setup a VPN using an RV042 (fw ver: 1.3.12.6) to access a VISTA computer over the internet using a laptop using QVPN's latest version. I finally got it to connect but then hang's with error " Gateway is not responding, do you want to wait?". If I say yes it go through the login again and hangs. If I say no, it hangsup. I've tried a couple different ideas using tunnelling and static IPs in the router but nothing. All I want is to be able to access one computer through the RV042 over the internet from any other computer using the QVPN.
View 6 Replies
View Related
Nov 19, 2011
I have 2 VLANs set up and I know they are set as default to not allow one to communicate to the other. Is there a way to set a rule to allow that? I'd like VLAN1 to be able to access VLAN2, but not the other way around.
View 1 Replies
View Related
Oct 25, 2011
I am trying to connect computers through internet connection.When I type the address on a browser (google chrome or mozilla) it says that the address is unreachable.[URL]"An attempted connection to 112.201.9.206:80 was refused. This typically indicates that there are no services available on that port, but that it is NOT being blocked by a firewall or your ISP."
Heres what I have done so far.
* Registered at DynDNS
* set-up/log-in DDNS on my router (D-Link WBR-2310). enter DDNS address, enter username and password.
* Set-up port forwarding (port 80(http) and port 443 (https)) on router
* open both port (80 and 443) on my computer and exmy windows firewall
View 7 Replies
View Related
Jul 24, 2011
I am trying to set up my router to grant http traffic a minimum bandwidth of - for example - 5,000 kBit (if there is any http traffic).
So I set http min. rate to 5,000 while I set nntp min. rate to 1 However, when I run nntp downloads on several connections (e.g. 10) my single http download never goes above 1,000 kBit. Without any other connections I reach 8,000 kBit.
I am using a single 12 MBit line.
View 4 Replies
View Related
Nov 26, 2011
I just purchased a RV016 router, upgrading from an older Linksys router only to find out that there was no support for TZO DDNS. I have used TZO for years now and don't really want to change to another service. Any way to request this from Cisco engineers for future firmware upgrades?
View 2 Replies
View Related
Apr 19, 2013
I have two of the Wrvs 4400n V2 VPN (V2.0.2.1-ETSI) routers in different countries, one in the UK and one in Australia. They are permanently linked using the IPSec VPN tunnel and the dynamic DNS feature (DynDNS.org). I have found that the router in the UK does not update its IP address automatically to the dns website when the UK Internet service provider changes the WAN IP of this router. This makes the IPSEC tunnel go down until I telephone the UK location and ask to force the router to update its IP address with dyndns by restarting it or by using the routers configuration to re-save the password for dynamic dns.
View 2 Replies
View Related
Jan 30, 2013
Region : UnitedStates
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111130 Rel.54317n
ISP : century link
How do I test my routers ddns? My computer went down. So, my adsl ip address changed. I caused the modem/router to reboot. But the new ip wasn't sent to the Host (dyndns.org). I had to update my ip manually on [URL].
View 2 Replies
View Related
Mar 24, 2013
Recently I wanted to setup IPv6 for my home network. I signed up for tunnelbroker.net service and was provided with IPs. Then I configured the IP address in my DIR-615. But It's not working..
Screenshot of IPv6 config (router) : Screenshot of my Win 8 network Config : I also tested at [URL] but failed...
View 3 Replies
View Related
Mar 15, 2013
Region : Austria
Model : TL-MR3420
Hardware Version : V1
Firmware Version :
ISP : orange.at
When I first installed the router I used the built-in provider settings for "ONE" which used to be the name of the provider before it was taken over by orange.at. It seemed to work fine but I experienced some funny server errors with certain web services. I contacted orange.at about this and they told me to adjust the provider settings in the router as follows:
Dial number: *99#
APN: fullspeed
The reason for the problems was that they use different proxy servers for their services and applications. Now it works fine (so far).
View 1 Replies
View Related
Nov 2, 2011
How do you setup a Clint VPN on a RV042
View 1 Replies
View Related
Oct 24, 2011
I'm a bit new at this and I wanted to know if this is possible with the RV042 or if there's a better product to use. Our server is at located at location A and locations B and C telnet to the server via a VPN. We're looking at getting another ISP at each location as a backup and abandon older modem backups.
Would I setup a VPN tunnel between (A and B) and (A and C) for each ISP? Also I had a question on local IP addresses and if this would work
location A, ISP 1 -> location B, ISP1
local IP 192.168.1.1 remote IP 192.168.2.1
Public IP aa.aa.aa.aa Public IP bb.bb.bb.bb
[ code]....
View 2 Replies
View Related
Nov 10, 2011
I am trying to configure a Linksys RV042 VPN router as a simple router. I want to connect it to one of the ports from a CiscoASA5505 router because I need to connect 4 additional PC's and the ASA is out of available ports.I am trying to connect it through an ethernet port from my laptop.At first I configured the TCP/IP settings as getting the IP and DNS's automatically and but I was able to enter the setup by entering the default IP address (192.168.1.1).After 10 minutes it got disconnected and could not connect again.I get Status: Limited or no connectivity.If I try to type the IP address manually (192.168.1.1) I can ping the router successfully but the setup webpage never opens.what I need to do in order to access the setup webpage when I connect the router directly to my laptop?
View 10 Replies
View Related
May 19, 2012
We have 36 cctv cameras slowing down our oracle network pc's all in same subnet. I want to remove the dvr's of cctv to a separate network to improve performance. How to accomplish that with a Rv042 linksys router? Or is there any other better way around. 5 Users access the cctv cameras all the time.
View 2 Replies
View Related
May 3, 2012
I have the rv042 vpn router which is the main gateway for our internet, connected to the vpn is one server for a software and then another computer is connected for a web server software, well i need to get these setup like so
Setup firewall rules that will block all inbound Internet access to the web server except port 443Setup firewall rules that will block all communication between the two internal networks, except ports 7000 and 1702These must be on two different internal networks
View 2 Replies
View Related
Jan 24, 2013
I have RV042 and E4200 routers . I tried the manual UPnP port forwarding using Rv042 router and was succesful ( by typing 192.168.1.1 in the explorer and logged in using user name and password )
I am using a linux embedded system whose Internal IP ,Internal port are mapped .This system is connected to one of the LAN ports
I want to try auto UPnP port forwarding both for RV042 router and Linksys E4200 routers
After enabling the Upnp option only and logging out ,Can i add a port mapping entry in this router without logging in using a C++ program which runs on linux embedded system .
View 2 Replies
View Related
Aug 22, 2012
I was looking for a small business router that has VPN support and dual WAN support for load balancing. Upon reading reviews, I think RV042/RV042G is a good choice. Now am thinking if it supports intervlan/ router-on-a-stick configuration?
View 5 Replies
View Related
Mar 16, 2011
We have a Network set up with a RV042 router. Router is hooked up to Cox Cable and ATT DSL. Currently have 20 computers hooked up to the router all using Static IP addresses. Setup has been in place for over 7 years. I want to set up a Wireless Access point on this network. The problem is, I can't seem to get DHCP to work right even WITHOUT the Wireless Access Point. I have taken one of the computers that works great with a static IP and changed it to be DHCP, I have enabled DHCP on the router and set the from and thru parameters for the IP assignment. The computer will connect and get an IP address and it allows me to see all the INTERNAL servers on the network but going to the Internet is REAL FLAKY. I usually have to refresh 5 or 6 times to get a web page and sometimes even that don't work. If I do get a page to come up there is about a 10% chance that it will bring up a subpage of that page without doing a refresh 5 or 6 times. Its like it won't hold the connection to the Internet. I did notice one thing different in the User Manual of the RV042 that is different than all the other Linksys routers I have worked with. It says that when you enable the DHCP on the router, you then make sure ALL computers hooked to it are set for DHCP. All other routers I have worked with do NOT use that word ALL. Am I missing some setting or is this a binding thing where you are either ALL static or ALL DHCP?
View 1 Replies
View Related
Nov 24, 2009
I have a RV042 router and we are trying to set-up our OWA for outside access. I can't figure out which ports or which page those ports are on to open them. We are a small company and we do not have IT except for ourselves. The internal network works fine but i can't get the Exchange access from outside.
View 2 Replies
View Related
Nov 8, 2011
Is there a way to set up Quick VPN on the RV120W without changing the internal subnet? I have just taken over responsibility for a network and I don't know all of the nooks and crannies yet, so I'd rather not change the internal sub net. I've tried setting up a user then changing the LAN settings afterward, but it automatically removed the VPN user when I did so.
View 1 Replies
View Related
Jan 1, 2012
I've just purchased a couple of SRP527W routers. I've been unable to even browse to the default 192.168.15.1 to start my configuration. My local network is 192.168.1.x. At risk of showing my stupidity, what am I doing wrong.
View 5 Replies
View Related
Sep 16, 2012
Just purchased an RV220W for a customer to replace a WRVS4400N that had no support for One-to-One NAT and have found the One-to-one NAT for this router is only marginally better.
I have three WAN addresses and three devices to map them to. With the RV0xx I've used the following configuration over a dozen times.
WAN Address 1 - the router's public address Port forward HTTP, HTTPS, and SMTP to Windows Small Business Server 2011 Email and Remote Web Access are accessible at remote.company.com
WAN Address 2 One-to-one NAT to private IP address of Ubuntu Server Add the following access rules: Deny allAllow HTTP from any to private IP address of serverAllow SSH from my company's static IP to private IPAllow FTP from my company's static IP to private IPCompanies website is accessible at company.com and I can update the website with SSH and FTP
WAN Address 3 One-to-one NAT to private IP address of the Hyper-V server's Intel RMM module (Lights out remote management) Add the following access rules: Deny allAllow HTTP, HTTPS, and all RMM ports from my company's static to the RMM modules private IPI can access server at rmm.company.com from my companies network connection
My problems are as follows:
The One-to-one NAT option now requires you to specify the service you'd like to forward (Note: service, not services)If you select the Any service which is the only way I can see to have more than one service, there is no way to add any specific Allow or Deny rules because the Destination box is grayed out on the access rules page.This results in my Ubuntu server only having HTTP forwarded to it and my RMM module having all ports opened up to any IP address. There must be some way around this! I don't understand why the Destination IP option is greyed out for all Inbound access rules. I have been using this same configuration with the Cisco RV0xx, many Sonicwall firewalls, as well as several Cisco ASAs. Obviously this is not an ASA but this implementation of One-to-one NAT is useless!
View 5 Replies
View Related
Jan 10, 2013
I have the following scenario: Pair of Cisco 887VA routers acting as Layer 3 for Voice/Data VLANs with a pair of 2960 LAN Base switches acting as Cores and possibly then 2960 LAN Lites hanging off them as access switches. Our Service Provider has provided an example config where the class-maps match based on dscp values for the QOS policy applied to the DSL circuits. We can obviously trust the attached phones but I want to be able to mark data traffic on my core switches based on destination IP/port to allow application definition. My major question is can I have a service policy on my Layer 2 uplinks to the routers where the linked classes setting dscp vlaues are based on class-maps matching on the contents of IP access lists based while at the same time not remarking the EF marked packets from the phones?
View 7 Replies
View Related
Dec 5, 2011
I have some confusion about some hardware components. I watched the video datasheet of cisco routers and switches. In cisco 2901 and 2911 models of routers there is service module . What is meant by service module. what does it do ? If we buy a new 6500 switch, what are the components we get bydefault. Is there any special configuraton to be done for 6500 . like Sup engine config etc. What is the difference between ASIC and Sup engine ? In which slots, we need to insert Supervisor Engine ? does it vary with the model . (6503, 6505, 6509, 6513 etc).
View 6 Replies
View Related
