D-Link DIR-655 :: Rev B. 2.00 DDNS And NTP Time Conflict?
Dec 23, 2010
Hooked up this router the other day to replace my old Linksys G - which has been bulletproof for 8 years. I am now wondering if I made a mistake with this unit.
I set up DDNS - after much trial and error with dyndns it now works fine.I tried to set up NTP time function - does not work. Then I set time manually. Of course on reboot it looses the time since there is no internal time function. So I need NTP.In the course of troubleshooting I turned off DDNS and behold the NTP time function now works. I turn DDNS back on and NTP does not work.
I see no logical connection between these two functions, yet the seem to interact (or not) somehow.When the NTP is not working, on reboot the time displayed in the router is the last time that I MANUALLY set the time, even though that is grayed out since I have (supposedly) activated NTP.
If I do NOTHING to NTP and uncheck DDNS, after reboot the time is correct.I tried many different NTP servers all with the same result.Looking back on-line, I see the NTP function has been a continual problem with some folks (maybe those using DDNS?) in earlier firmware. Come on DLINK don't you think it's time to get this fixed?
View 6 Replies
ADVERTISEMENT
Mar 21, 2005
I am using an 831 router and am trying to get DDNS to work. Here is the debug output:
RESS_ASSIGN: Interface Ethernet1 assigned DHCP address 67.162.204.242, mask 255.255.254.0, hostname testlab831.xxxxxx.com
00:53:06: DYNDNSUPD: Adding DNS mapping for testlab831.xxxxxxxx.com <=> 67.162.204.242
00:53:06: DYNDNSUPD: Sleeping for 3 seconds waiting for interface Ethernet1 configuration to settle
00:53:09: HTTPDNS: Update add called for testlab831.xxxxxxxx.com <=> 67.162.204.242
00:53:09: HTTPDNS: Update called for testlab831.xxxxxxxx.com <=> 67.162.204.242
[code]....
what the problem is with the "Call returned Connection time out for update testlab831.xxxxxx.com <=>" line.
View 3 Replies
View Related
Jan 12, 2013
Region : Germany
Model : TD-W8961NB
Hardware Version : V1
Firmware Version : 1.0.0 Build 110707 Rel.32779
ISP : DTAG
would it be possible to add other DDNS providers to the router menu?E.g. I use dnsomatic.com as DDNS service (pretty much the same syntax/protocol as DynDNS, but free and more flexible).
View 2 Replies
View Related
May 4, 2013
Region : Others
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :
I just set up DDNS for my home, and also set forwarding port 5000 for my NAS with an specific IP address 192.168.1.xx. Then, I use my office Internet to call DDNS xxx.dyndns.org:5000 to connect the NAS in my home, It is working OK (from outside to home) However, if I call xxx.dyndns.org:5000 by my home Internet, it is not working (from inside home to home). But if I directly call NAS' IP address 192.168.1.xx:5000, it is OK to reach it. So I think, DDNS used behind TD-8970 (inside home) is not working. TD-9870 is not forwarding port.
I don't know what do I miss in setup this WD-8970.
My previous Zyxel wireless router modem can allow me to us DDNS behind it with out any extra setting. Is it possible that there is still some bug in Firmware of this TD-8970?
View 4 Replies
View Related
Sep 3, 2011
Everythings works great except thee fact that my DIR-615 router
(Hardware Version: H1 Firmware Version: 8.00) logs the following error :
[SYSTEM]: DDNS error connecting to members.dyndns.org:80
View 6 Replies
View Related
Mar 8, 2013
I just had to get rid of a bad DIR-825 that I replaced a trusty old DIR-655 with and now I'm back. Anyhow, I can't seem to make the DDNS setting stick in the router. All of the information is correct, but it doesn't seem to want to login. When I click the enable check box, it tries connecting and then greys out and doesn't connect.
View 3 Replies
View Related
Jan 30, 2013
Region : UnitedStates
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111130 Rel.54317n
ISP : century link
How do I test my routers ddns? My computer went down. So, my adsl ip address changed. I caused the modem/router to reboot. But the new ip wasn't sent to the Host (dyndns.org). I had to update my ip manually on [URL].
View 2 Replies
View Related
Sep 6, 2011
I have two networks in same ip address sys 1 in 192.168.1.xxx sys 2 in 192.168.1.xxx where XXX = 0 to 254 i want to make a link between sys 1 and sys 2 without ip address conflict. is it possible to do so ??
View 4 Replies
View Related
Jan 6, 2012
I am having issues with wireless connections with my laptop but I can connect with my phones and iPod, however wired connections work perfectly.
The moment I attempt a wireless connection I receive continuous error messages saying that there is an ip-address conflict with another system on the network and i lose all internet access.I have already tried adding a dhcp reservation?
View 1 Replies
View Related
Jan 10, 2012
AI have a Dir-825 router. The 5GHz is turned off and the wirless is on G/N. I have shawcable for my isp and my firmware is 2.06 and its a Rev B Router. I also have Qos Engine on for allowing me to have 2 xboxes on Open NAT.problem is my wireless signal for some wired reason is VERY weak. A while ago it used to work really far way outside. It was around 150ft distance at 4 bars. Now for some reason I can't even go upstairs without getting a 1 or 2 bar signal.
View 3 Replies
View Related
Sep 1, 2011
i have had my dir-655 one year now, have never had wireless problems with it until now.my notebook's internet gets very slow somedays, i just restart my router and then internet speed works normally.i have:
Hardware Version: A4 - Firmware Version: 1.32EU
View 5 Replies
View Related
Jul 21, 2010
my router internal time somehow will not working on manual config it will stop after certain period now im trying to use NTP
[code]....
View 2 Replies
View Related
Mar 4, 2012
I have DIR-655, 1.33NA. Recently, I noticed the clock in the router was off, so I wanted to correct it. Each and every time I go through the steps to reset the clock, using time server or clone computer time, or manual reset, after the save settings and reboot of the router, i find the router still displays the wrong time, and frequently reverts itself to a time on Feb 22, 2012. Same problem for trying to reset the DST settings, turning automatic time from server on and off, changing the time server polled. Additionally, I have forced the router to factory settings and rebuilt all of my configuration no less than 4 times.
So, since I recently had to trade out the cable modem because Cablevision fried it with their 'system upgrade', I'm also wondering if the same shenanigans also damaged the router.
View 4 Replies
View Related
Jun 12, 2011
Set my DIR-655 to limit my son's time on the Internet. I have all the connections set to the MAC Addresses
View 4 Replies
View Related
Jan 19, 2011
Internet cable to dir655 and cat5 to master computer with slave using wireless. Network between them always works fine. But if master connects to internet the slave will lose the internet until the master disconnects. like it won't share the signal.
View 1 Replies
View Related
Nov 24, 2012
I starting having really bad lag when playing games or just surfing. I put on wireshark and can see my router is broadcasting all the time. here is part of the wireshark log
"1","0.000000000","D-Link_**:**:**","Broadcast","ARP","60","Who has 192.168.0.172? Tell 192.168.0.1"
"2","0.000737000","D-Link_**:**:**","Broadcast","ARP","60","Who has 192.168.0.171? Tell 192.168.0.1"
"3","0.001469000","D-Link_**:**:**","Broadcast","ARP","60","Who has 192.168.0.170? Tell 192.168.0.1"
"4","1.002284000","D-Link_**:**:**","Broadcast","ARP","60","Who has 192.168.0.169? Tell 192.168.0.1"
it does this for the whole subnet then starts over. i turned off all the broadcasting in all the menu and it still doing it. i upgraded to 2.10NA, but it did not seem to do anything to it. I bought this router on 3-5-11. I have not tried resetting it to factory settings. I wanted to see if i missed something first. Router is on a APC UPS with the modem and the switch.
Hardware version is dir-655 B1
firmware is 2.10NA
cox cable is my ISP
View 14 Replies
View Related
Nov 1, 2011
When I first got my DIR-655 (Hardware version B1) the Wireless would keep on turning itself off, and it needed a reboot of the unit to turn it back on again.After having upgraded to the 2.03NA version of the Firmware it seems to be working correctly and hasn't turned off for a few days now.
View 14 Replies
View Related
Oct 21, 2011
I have one Cable Modem/Router built in (Netgear CGD24N) and I wish to use two routers (the other being the DIR-655). The Netgear is a fantastic Cable Modem but a ****py router, but I wish to use both. One will be situated upstairs and the other downstairs.I have connected the two at different locations via the wall and the DIR-655 successfully went to the Netgear login page (as I went to 192.168.0.1) but internet connection was not working, whereas the Netgear internet was working. This was connected LAN to LAN.
Another procedure I have tried was connecting to them LAN - INTERNET (INTERNET being the D-link one) and received the following message: "The addressing of the Internet side learnt thru DHCP conflicts with the addressing selected for the LAN side. Internet communications will be disabled until you have changed the LAN side addressing to resolve the problem."
View 1 Replies
View Related
Aug 13, 2011
My kid is heading off to college with a Toshiba Satellite E-205 laptop and a Kodak ESP Office 2150 printer. She would like to use the wireless printer option on the Kodak, which requires a wireless router. I have a D-Link DIR-655 wireless router that I can send with her.
I know her university has a very robust wireless system for Internet access, so she is going to want to use their wireless access.
So, the DIR-655 sole use will be to allow access to the printer. It will not be accessing the Internet or be cabled into the university's network.
Is it possible to operate TWO wireless connections at the same time so she can hit her university wireless and the DIR-655 so she can print wirelessly?
how do I configure the laptop and the DIR-655 to allow this kind of access?
View 2 Replies
View Related
Feb 27, 2011
Is there a device, which is able to produce a time delay on fiber optical link? I mean for example if one would like to reduce the power level of an optical signal, he could use simple air-gap optical attenuator on optical link. However, has somebody seen a device, which is able to introduce a time delay on optical link?
View 6 Replies
View Related
Mar 14, 2011
The version of my DIR-655 is 1.32NA. Entries in the column of Time for LOG DETAILS are incorrect. How can I correct them?
View 3 Replies
View Related
Sep 30, 2011
I have copied my computer's time in the router time setup under Time in the "tools" section of the router setup. After a few days of the router being up without a hard restart, it has lost 10 minutes somehow. I went to the logs and cleared them out and then looked at the entry showing that the log was cleared and looked at my computer clock and the time stamp of the log entry, and it was 10 minutes slower than my computer clock that I had originally set it from. I have a clock plugged in by the computer, and my computer always matches the clock that it plugged in, so I know it isn't my computer loosing time. What is going on here? Why does the router loose the correct time after it has been up and not unplugged or rebooted at all? I know that the router will loose the time if you unplug it, but this isn't the case here.
View 5 Replies
View Related
Feb 24, 2012
First I tried restricting all computers from accessing the internet from 11:00PM to 6:00 through access control. I enabled it and set up the schedule but it does not cut off the internet. I went through create a new schedule and did that but again it still connects. Then, in access control, I selected always and put in my son's IP address and created a schedule for him but it won't allow him any internet access.
View 2 Replies
View Related
Oct 30, 2011
I have the DIR-655 rev B1 with 2.03NA firmware. After 7 days the system time falls back an hour. The timezone settings are correct and I have used both 0.us.pool.ntp.org and DLink's time servers.
View 6 Replies
View Related
Mar 4, 2013
2 days ago bought 2 dlink 930l camera's. Everytime a reset or reboot the camera or maybe not even reboot the date and time for the camera is far away, so it is not saved. I am not using yet a ntp server because i don't now which one yet.
View 3 Replies
View Related
Mar 23, 2012
On one of my cameras time keeps resetting as if power was turned off then on again. It happens 2-3 times a day. I think there is no way to resolve it other than replace the camera.
View 6 Replies
View Related
Nov 23, 2012
I have had a DIR-655 router for a few years now, but slowly over time the wireless output has gone down. I have tried changing parameters to only-g or only-n, rebooted, changed other parameters based on what I have read in some of the forums, but have not been able to restore the power. It has an ANT24-230 antenna, and the latest firmware update 1.35NA. Different devices all show the same thing, that even next to the antenna the strength is only 80% in spite of the fact that the wireless output is set to max.
even though I have been working on this for a couple of months now, and am considering buying a new 11AC or 900N router if this is not fixable.
View 2 Replies
View Related
Aug 26, 2011
How to keep the time and date field (in camera settings) to stay? All my other settings seem to be working (and staying) but unless my camera is on all the time, it reverts to 01-01-2011 with a 12:00 am time once I plug it in. I only hook the camera up during the day while I'm at work, so I can keep an eye on my older dogs. I'm not able to view the live video at work (ActiveX issues) so I tried to set up an email schedule so I would be sent pictures.
As a last resort, I went through the wizard set up one more time, thinking I missed something the first time around, but that didn't work either. I am not impressed with D-link support so really don't want to call them unless I absolutely have to.
View 2 Replies
View Related
Mar 19, 2012
I bought a HooToo IP Camera (HT-IP212) to monitor my garden activities from my laptop at home. Everything so far is going as normal as it shall be. The wired connection was fine and is providing steady image and video output. Question 1# is i can't figure out how to configure the wireless section. Shall I set up the DDNS for the Cam as per the instruction? Question 2# Can I monitor my garden using the laptop in my office (not the one in my house), how can i set up the procedure?
View 1 Replies
View Related
Oct 21, 2012
i have a cisco 892 router that is behind a NAT/ROUTER/DHCP device of the ISP.i need to configure DDNS but i get a privat ip on the Cisco "WAN" interface. i need a local ip/port to be available from the outside.i have configured de ddns service methode (Dyndns) [code] This wil send the private ip of de "wan" interface and that wil not work. <A> in de connection string wil be my private wan ip i get from the dhcp of the ISP .... ik can add a static rout on the ISP, but can not disable the router function (like bridging....) is it possible (with script or someting, MY IP LOOKUP) that the cisco router know's his real public ip, and that this ip is used to update Ddns ?
View 4 Replies
View Related
Jan 27, 2011
I am trying to set up a d-link router with a modem provided by time warner cable. I've powered down, reset the router, and I've put it on dynamic settings (sorry if that's incorrect terminology... not a comp. buff). I can't get my wireless to connect to internet.
View 1 Replies
View Related
Apr 27, 2012
Last night, I lost my NetFlix connection. It was no biggy, I just restarted the Cheers episode that I had been watching. This morning, I checked the DIR-655 log and the following is what I had found (date and times aren't accurate).
May 24 03:22:33 info [1076865.190000] device br0 left promiscuous mode
May 24 03:22:29 info [1076861.620000] device br0 entered promiscuous mode
May 24 03:20:20 info [1076732.020000] device br0 left promiscuous mode
May 24 03:20:16 info [1076728.140000] device br0 entered promiscuous mode
May 24 01:45:42 info [1071054.590000] device br0 left promiscuous mode
[code]....
Promiscuous Mode is usually the result of sniffing according to Wiki. Whatever is promiscuous mode. Also, I don't know what device br0 is. I do have my Brother wireless printer connected to the DIR-655 but it's device name is BRW0022581FB096. I was wireless at the time of connection problem, and the wired computer connected to the DIR-655 had been off.
View 6 Replies
View Related
Jan 19, 2013
This appears to be a different issue than the one described in the sticky above. I have two DAP-1533's. Both are running firmware 1.02 from the Taiwan website. I am running both in Bridge mode at 5 GHz only. They both exhibit the same problem. If you go to "Maintanence > Time and enable NTP it never updates to the correct time. Also, after "saving" the time gets set to the same time as shown grayed out in the "Set the time manually" window. I am using this time server: ntp1.dlink.com and tried others and have tried time server ip address in case it was a DNS issue. Also, why is there no DAP-1533 section on the forum?
View 9 Replies
View Related
