D-Link DCS-930L :: Time And Date Settings?
Aug 26, 2011
How to keep the time and date field (in camera settings) to stay? All my other settings seem to be working (and staying) but unless my camera is on all the time, it reverts to 01-01-2011 with a 12:00 am time once I plug it in. I only hook the camera up during the day while I'm at work, so I can keep an eye on my older dogs. I'm not able to view the live video at work (ActiveX issues) so I tried to set up an email schedule so I would be sent pictures.
As a last resort, I went through the wizard set up one more time, thinking I missed something the first time around, but that didn't work either. I am not impressed with D-link support so really don't want to call them unless I absolutely have to.
View 2 Replies
ADVERTISEMENT
Mar 4, 2013
2 days ago bought 2 dlink 930l camera's. Everytime a reset or reboot the camera or maybe not even reboot the date and time for the camera is far away, so it is not saved. I am not using yet a ntp server because i don't now which one yet.
View 3 Replies
View Related
Sep 29, 2011
Is it possible to get a time and date stamp on the image when using the FTP on a schedule? The time and date stamp is shown on a live video image on pages 20 and 21 of the manual but I'm not seeing how to get it on snapshots.
View 3 Replies
View Related
Mar 17, 2011
The DCS-930L provides no date & time on video stream at mydlink, but does display those when accessing on the LAN. Is there a way to force the date/time tag to show over the web? Otherwise, remote recording might not know when an event happened?
View 1 Replies
View Related
Apr 27, 2012
Last night, I lost my NetFlix connection. It was no biggy, I just restarted the Cheers episode that I had been watching. This morning, I checked the DIR-655 log and the following is what I had found (date and times aren't accurate).
May 24 03:22:33 info [1076865.190000] device br0 left promiscuous mode
May 24 03:22:29 info [1076861.620000] device br0 entered promiscuous mode
May 24 03:20:20 info [1076732.020000] device br0 left promiscuous mode
May 24 03:20:16 info [1076728.140000] device br0 entered promiscuous mode
May 24 01:45:42 info [1071054.590000] device br0 left promiscuous mode
[code]....
Promiscuous Mode is usually the result of sniffing according to Wiki. Whatever is promiscuous mode. Also, I don't know what device br0 is. I do have my Brother wireless printer connected to the DIR-655 but it's device name is BRW0022581FB096. I was wireless at the time of connection problem, and the wired computer connected to the DIR-655 had been off.
View 6 Replies
View Related
Jul 17, 2011
I have a DIR-825 router connected to my cable modem. The 2.4ghz constantly goes down but not the 5.0ghz. Our wireless devices will see the connection but we are unable to connect.We only have one device that uses the 5.0 and multiple devices that use the 2.4 and none of them can connect.I am currently running firmware 2.02. I also notice that the time changes and I have to reset the time/date.I have tried rebooting the device, resetting the router, changing the network key, updated the time/date, renewed the DHCP...I don't know why it keeps going down, why the time/date keeps changing, and why I cannot get the 2.4 working.
View 13 Replies
View Related
Nov 27, 2011
i installed cameras but want to set up for motion. I have 2 dcs 930l cameras and I can see them live i have only 2 settings live video and camera info i also downloaded the link from support.dlink.com i have a new windows 7 laptop and it keeps tryng to download java app problem is now computer keeps asking for a username and password and I have no idea what username and pw it wants as it says in the box it is unsecure
View 1 Replies
View Related
Jan 14, 2013
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
Seems that Daylight Savings Time starts on March 10th, 2013 this year. The drop-down menu only goes up to 6.
View 1 Replies
View Related
Apr 1, 2013
Due to problems with the D view cam, I have reset my IP camera DCS-930L but I can't register the password, it says "There was a problem saving your settings. Press next and try again." I can't get pass saving password, tried all the previous passwords but none works.
View 2 Replies
View Related
Apr 6, 2013
I just got a DCS-930L camera. I was able to set the password (10 characters) and complete the setup. It then said I needed to update the firmware which I did and it successfully completed. I was able to access it through the mydlink web page but when I clicked on the advanced settings, it wouldn't log in. I tried running the setup from the CD but it said "There was a problem saving your settings. Click Next to try again." That never worked. I tried a hard reset, no luck.
View 3 Replies
View Related
Sep 4, 2011
We nave a new DCS-932L, and a several month old DCS-930L, both with latest firmware.I have set up both the same, enabled Motion detection across the two middle horizontal bands (fully across); no email; ftp enabled; Video set to 1 fps, quality="high", java.The DCS-932L seems to ignore the frames per second settings; motion brings several seconds of 15 fps, generating maybe 50 image files in a burst.The DCS-930L on the other hand also seems to ignore the settings in the opposite direction, and sometimes has trouble providing even one complete frame.
View 4 Replies
View Related
Nov 18, 2011
just bought DCS-930L few days ago, the manual sounds so easy (but it's hard than it looks) i stuck on the setting-up, here is my problem: unable to connect to mydlink web site and there was a problem saving my settings. seems like internet connecting problem, the software just couldn't connect to internet.i have already registered, i got my device number and it couldn't be find in my device on mydlink.
View 5 Replies
View Related
Oct 19, 2011
I upgraded the firmware per one suggestion, but no difference.I am going thru the setup wizard with ethernet cable attached. I want to use them wirelessly so I clicked wireless setup, and entered my network info. At that point I get an error message saying it failed to save settings. I know the ID and password are correct.I have tried exiting the setup wizard and accessing the camera thru the web interface. All wireless settings are correct. The camera works FINE on web browser, myDlink, and even my iPhone app as long as the ethernet cable is attached.Other wireless devices have no trouble connecting to my router. Is there some setting on the router that can be preventing the connection? I've done some trial-and-error changes, like different ports and enabling/disabling UpNp on both camera and router.Oh and almost forgot to mention.I did call tech support, which was a joke. Some foreign lady was reading off a script that told me to reset, unplug, reboot everything. Then she gave me a case# and said upgrade the firmware.
View 11 Replies
View Related
Dec 3, 2012
if there's any way to track the time or date when my modem was used. I have a TP Link modem/router.
View 1 Replies
View Related
Jan 23, 2012
4402 Wireless LAN Controller running 7.0.116.0 versión. The equipment is working fine, but after a hard reset i lost date and time configuration.No other configuration is affected, only date and time. What can be the cause of this?
View 18 Replies
View Related
Aug 28, 2008
Setting date and time on WRT110
View 9 Replies
View Related
Feb 29, 2012
I have a E3000 with newest firmware that has a VOIP by Velcom. It's a Grand stream HT–286.My device is working perfectly with the router. Can call and recieve calls. the caller ID (Name and number that appears is accurate). The only problem is the caller ID's time and date are always wrong.When I unplug device, it goes back to Jan 1 and time 12:00am.Any call I then get is wrong.
In the router, I've enabled SIP ALG. And the firewall is only filtering ident (port 113) and Anonymous Internet requests.The device has a hard coded internal IP (192.168.123.110). and I reserve the IP using mac filtering.The device has an administration page that is unavailable to users as it's locked by a password. On this page has an NTP server setting that the device uses to get it's time/date.I see on the information page of the device that iot's registered to a sip server.The company is saying that it's a firewall issue. I'm not too sure how to proceed.
View 3 Replies
View Related
Sep 11, 2011
Time shows as: Current Time: 2011/09/03 Sta 20:53:36 (-08:00) "Sta" day? Also, the timezone is incorrect... I did select GMT -8:00 Pacific Time, and also the "Adjust for Daylight Savings time) So, the above time SHOULD be displayed as 2011/09/03 Sat 20:53:36 (-07:00) If the intention is to show the difference from UTC/GMT. I tried the newer version but it's broken big time. :-( I could not use it at all. None of the configuration changes I made would "stick".
View 2 Replies
View Related
Mar 29, 2011
I'm using a Verizon DSL router, Mac D-Link Camera Setup Utility (BETA), and Mac OS X 10.6.7. Configuration of camera is as recommended in manual with CAT-5 cable. Green light blinks irregularly in a communicating-with-router manner. The setup utility won't recognize the camera
View 1 Replies
View Related
Sep 10, 2012
I just got my ea4500. the 50 Mbs from Comcast was killing my old wrt54gl. the thing where cisco connect and access thru the web interface step on each other, or when the web interface does not expose all the settings is annoying. because i didn't want a guest network, i had to go back to Cisco connect. and things did not work well. i ended up re-doing the whole thing, because i did not want a guest network and wanted diff settings for 2.4 and 5 Ghz.and logging after so many years and Linksys still does not include a date/time stamp for the events. logs without date/time are not very useful.
View 6 Replies
View Related
May 24, 2011
SG200-08 and SG200-08P fail to hold or update Date/Time.(New installation for a UC320 setup.)I've got both an SG200-08 and SG200-08P that are failing to maintain date/time when set with "Use Local Settings". Every restart/powercycle causes them to reset to Dec 31 1969. Other settings save fine.I first tried to set time via SNTP Unicast using a variety of public time server addresses including the 3 hard coded to the SG200-08 firmware:
Sadly though it always just shows "Active Server Server Host Address: 0.0.0.0" and continues having 12/31/1969 as the date. Both after a config save and a reboot.I can ping the NTP servers just fine from the switches either by IP or by hostname.At this point I've decided that I must be missing something simple. At least I hope so... otherwise it's a firmware bug which means waiting for a fix.Other devices behind the same firewall/gateway (RVS4000) are updating NTP
View 2 Replies
View Related
Apr 24, 2012
time capsule can be the same as the router settings?
View 1 Replies
View Related
Jun 12, 2011
if you bring your new firmware, please verify the small bug in 'Time Settings': If you choose CET (GMT +1h) AND enable 'daylights saving time' the time goes back 6 hours instead of forward 1 hour.Firmware of RV120W: 1.0.1.3
I'm surprised that CISCO needs such a long time to solve such an issue... I thought I bought the new router from a leading network provider
View 4 Replies
View Related
Jan 10, 2012
AI have a Dir-825 router. The 5GHz is turned off and the wirless is on G/N. I have shawcable for my isp and my firmware is 2.06 and its a Rev B Router. I also have Qos Engine on for allowing me to have 2 xboxes on Open NAT.problem is my wireless signal for some wired reason is VERY weak. A while ago it used to work really far way outside. It was around 150ft distance at 4 bars. Now for some reason I can't even go upstairs without getting a 1 or 2 bar signal.
View 3 Replies
View Related
Sep 1, 2011
i have had my dir-655 one year now, have never had wireless problems with it until now.my notebook's internet gets very slow somedays, i just restart my router and then internet speed works normally.i have:
Hardware Version: A4 - Firmware Version: 1.32EU
View 5 Replies
View Related
Aug 26, 2012
why my device "cisco RVS4000" loses settings after some down time without electricity?
View 2 Replies
View Related
Feb 22, 2011
When i reboot asa 5540 firewall times settings to default
View 12 Replies
View Related
Jul 7, 2011
Can the client lease time be set to never expire to prevent loss of connection for wireless printer with a permanent ip address on E3200? Or is there another way to ensure continuous connection?
View 6 Replies
View Related
Mar 21, 2011
I would like to share my live video from my dcs-930L camera but don't want to give out my password that would allow people to change settings..
View 3 Replies
View Related
May 5, 2011
i was playing back the recording,when i skipped ahead, the sound disappeared. I am recording 10 hours worth everyday, most of the time i just need to skip to a certain time to see and hear what was going on,
View 2 Replies
View Related
Feb 12, 2013
How to add an external antenna? I'd like to mount a DCS-930L in a location (inside a metal housing) that would need the antenna to be a few inches away. Any internal layout information?
View 3 Replies
View Related
Aug 31, 2012
I just brought this D-Link DCS-930L. I insert the disc and follow the instruction and select the option of without WPS and follow the step of connecting the lan cable and power point but at Step 2, after the green light, it keep prompting me that it can't find the camera. it connected to the router where there is a lan cable connected to my pc.
View 1 Replies
View Related
May 12, 2011
I had to get a new router from verizon cause the old one died. so i reset the camera and wipe all the dlink software and settings. I then start fresh. i get all the way to choosing wireless and input the password. It states that there is a problem saving your settings. I tells me nothing more. I spent 4 hours on the phone with tech support and i can get it working through wired but I can't put it in my childs room wired. it worked perfectly before the router switch. funny thing is that its the same brand and model router.
View 4 Replies
View Related
