4402 Wireless LAN Controller running 7.0.116.0 versión. The equipment is working fine, but after a hard reset i lost date and time configuration.No other configuration is affected, only date and time. What can be the cause of this?
View 18 RepliesSetting date and time on WRT110
View 9 Replies View RelatedI have a E3000 with newest firmware that has a VOIP by Velcom. It's a Grand stream HT–286.My device is working perfectly with the router. Can call and recieve calls. the caller ID (Name and number that appears is accurate). The only problem is the caller ID's time and date are always wrong.When I unplug device, it goes back to Jan 1 and time 12:00am.Any call I then get is wrong.
In the router, I've enabled SIP ALG. And the firewall is only filtering ident (port 113) and Anonymous Internet requests.The device has a hard coded internal IP (192.168.123.110). and I reserve the IP using mac filtering.The device has an administration page that is unavailable to users as it's locked by a password. On this page has an NTP server setting that the device uses to get it's time/date.I see on the information page of the device that iot's registered to a sip server.The company is saying that it's a firewall issue. I'm not too sure how to proceed.
I just got my ea4500. the 50 Mbs from Comcast was killing my old wrt54gl. the thing where cisco connect and access thru the web interface step on each other, or when the web interface does not expose all the settings is annoying. because i didn't want a guest network, i had to go back to Cisco connect. and things did not work well. i ended up re-doing the whole thing, because i did not want a guest network and wanted diff settings for 2.4 and 5 Ghz.and logging after so many years and Linksys still does not include a date/time stamp for the events. logs without date/time are not very useful.
View 6 Replies View RelatedRegion : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
Seems that Daylight Savings Time starts on March 10th, 2013 this year. The drop-down menu only goes up to 6.
if there's any way to track the time or date when my modem was used. I have a TP Link modem/router.
View 1 Replies View Related2 days ago bought 2 dlink 930l camera's. Everytime a reset or reboot the camera or maybe not even reboot the date and time for the camera is far away, so it is not saved. I am not using yet a ntp server because i don't now which one yet.
View 3 Replies View RelatedHow to keep the time and date field (in camera settings) to stay? All my other settings seem to be working (and staying) but unless my camera is on all the time, it reverts to 01-01-2011 with a 12:00 am time once I plug it in. I only hook the camera up during the day while I'm at work, so I can keep an eye on my older dogs. I'm not able to view the live video at work (ActiveX issues) so I tried to set up an email schedule so I would be sent pictures.
As a last resort, I went through the wizard set up one more time, thinking I missed something the first time around, but that didn't work either. I am not impressed with D-link support so really don't want to call them unless I absolutely have to.
Last night, I lost my NetFlix connection. It was no biggy, I just restarted the Cheers episode that I had been watching. This morning, I checked the DIR-655 log and the following is what I had found (date and times aren't accurate).
May 24 03:22:33 info [1076865.190000] device br0 left promiscuous mode
May 24 03:22:29 info [1076861.620000] device br0 entered promiscuous mode
May 24 03:20:20 info [1076732.020000] device br0 left promiscuous mode
May 24 03:20:16 info [1076728.140000] device br0 entered promiscuous mode
May 24 01:45:42 info [1071054.590000] device br0 left promiscuous mode
[code]....
Promiscuous Mode is usually the result of sniffing according to Wiki. Whatever is promiscuous mode. Also, I don't know what device br0 is. I do have my Brother wireless printer connected to the DIR-655 but it's device name is BRW0022581FB096. I was wireless at the time of connection problem, and the wired computer connected to the DIR-655 had been off.
I have a DIR-825 router connected to my cable modem. The 2.4ghz constantly goes down but not the 5.0ghz. Our wireless devices will see the connection but we are unable to connect.We only have one device that uses the 5.0 and multiple devices that use the 2.4 and none of them can connect.I am currently running firmware 2.02. I also notice that the time changes and I have to reset the time/date.I have tried rebooting the device, resetting the router, changing the network key, updated the time/date, renewed the DHCP...I don't know why it keeps going down, why the time/date keeps changing, and why I cannot get the 2.4 working.
View 13 Replies View RelatedIs it possible to get a time and date stamp on the image when using the FTP on a schedule? The time and date stamp is shown on a live video image on pages 20 and 21 of the manual but I'm not seeing how to get it on snapshots.
View 3 Replies View RelatedThe DCS-930L provides no date & time on video stream at mydlink, but does display those when accessing on the LAN. Is there a way to force the date/time tag to show over the web? Otherwise, remote recording might not know when an event happened?
View 1 Replies View RelatedTime shows as: Current Time: 2011/09/03 Sta 20:53:36 (-08:00) "Sta" day? Also, the timezone is incorrect... I did select GMT -8:00 Pacific Time, and also the "Adjust for Daylight Savings time) So, the above time SHOULD be displayed as 2011/09/03 Sat 20:53:36 (-07:00) If the intention is to show the difference from UTC/GMT. I tried the newer version but it's broken big time. :-( I could not use it at all. None of the configuration changes I made would "stick".
View 2 Replies View RelatedWe have a WLC 4402 controlling 40+ LWAPs. Is there a way to keep Tx power level assignment dynamic, but set the time of day it does it? I'd like to minimize user impact. (Firmware v. is 7.0.116.0)
View 2 Replies View RelatedSG200-08 and SG200-08P fail to hold or update Date/Time.(New installation for a UC320 setup.)I've got both an SG200-08 and SG200-08P that are failing to maintain date/time when set with "Use Local Settings". Every restart/powercycle causes them to reset to Dec 31 1969. Other settings save fine.I first tried to set time via SNTP Unicast using a variety of public time server addresses including the 3 hard coded to the SG200-08 firmware:
Sadly though it always just shows "Active Server Server Host Address: 0.0.0.0" and continues having 12/31/1969 as the date. Both after a config save and a reboot.I can ping the NTP servers just fine from the switches either by IP or by hostname.At this point I've decided that I must be missing something simple. At least I hope so... otherwise it's a firmware bug which means waiting for a fix.Other devices behind the same firewall/gateway (RVS4000) are updating NTP
We got WLC 4402 running software 7.0.235 and would like to backup the configuration and restore on 5508. Is this doable? Do we need to be on the same version as WLC 4402. How to get cisco document to follow the steps if the above is doable,5508 is new with no setup.
View 6 Replies View RelatedI have been working on my ASA 5510 version 8.2(1) trying to change the maximum connection time. Originally the custom "Group Policy" for IPSEC (Remote Access VPN) was set to inherit the settings from the default system Group Policy (DfltGrpPolicy). The custom group policy for the sake of this discussion is called "ABCD". I have modified the settings on the default (DfltGrpPolicy) as the custom policy (ABCD) was inheriting the configuration from default to disconnect after 1200 minutes. I changed the setting "maximum connection time" to 1200 minutes. I saved the configuration and what not then connected my VPN client, after two (2) hours I was disconnected. Something just doesn't add up.
I went ahead and deselected all inherited properties and manually configured them for the ABCD custom policy. No longer was the ABCD custom policy configured to use the inherited properties/settings. I saved the configuration again tested but instead of having a 1200 minute connection limit, I have 120 minute connection limit. Inside Monitoring --> VPN --> Sesssions : I can click on my session and see Session details". The Group Policy and Connection Profile properly list the "ABCD" custom profile. However, the "Conn Time Out" setting is: 120 minutes. I am completely stumped as to what is going on.
In the actual running config I see:
group-policy abcd attributes
banner none
wins-server value 123.123.123.123
dns-server value 123.123.123.123
dhcp-network-scope none
vpn-access-hours none
vpn-simultaneous-logins 3
vpn-idle-timeout 60
vpn-session-timeout 1200
What I need to do next to get this working short of a recycle of the ASA.
My wife had someone at her school make changes to her laptop (she dosn't know what) so that she could use the school's network (it did not work). Now that she is at home the laptop will not connect to the wireless home network. Is there a way to restore the laptop to a date before the changes were made ?
View 1 Replies View RelatedI need to estimate the installation and configuration time of Cisco NAC (NAC Network Module spare for 2800, 3800 ISR) and Cisco NAC Manager(NAC Appliance 3315 Manager -max 3 Servers. There is some Cisco tool to estimate the installation and configuration time?
View 3 Replies View RelatedWe have ASA running code 8.0.4 with Active/Standby for quite long time. Today when we gave the command wri standby it started sync the config to standby ASA but waited forever.when we checked the show failover, we got the following result.
This host: Secondary - Active
Active time: 1928633 (sec)
slot 0: ASA5540 hw/sw rev (2.0/8.0(4)) status (Up Sys)
Interface PERIMETER-MGMT (10.12.8.1): Normal (Not-Monitored)
Interface OUTSIDE (86.36.xx.xx): Normal (Waiting)
[code].....
When we console to Standby ASA and tried to save (wri mem), we got the following error and also please note the hostname has become default...?
ciscoasa(config)# wri memory
Building configuration...
Command Ignored, Configuration in progress...
[FAILED]
and when we tried to give following command we got this error:
ciscoasa(config)# copy running-config startup-config
Source filename [running-config]?
%Error reading system:/running-config (Configuration temporarily locked)
ciscoasa(config)#
I see here the standby ASA IPS module is down, but can that issue cause not sync the config backup and writing to nvram (save config)..?
I am looking to add a new wireless network for our customers to use.I would like to cover multiple areas of the site. And if cheap enough the whole site.Ideally I would like a control panel I can use to create new passwords for every customer that wants to connect. I can then set an expiry date on the password after that it deletes the password.An extra would be if the person would have to sign an e-policy before being allowed to browse.
View 9 Replies View RelatedI have a network with static routes witch I need to convert to OSPF.Never used OSPF, and do not have much experience in routing in general.The netvork is connected via some fiber links, but moastly wireless bridges.I have attached a drawing of how the network is.Routers are 3550, 3560 and 3750s.Each router is on a different physical site.
View 2 Replies View RelatedI bought a new E1200 this fall when I got a new Internet provider who recommended it to replace my really old one. It worked fine until a month or so ago when it would occasionally disconnect. At first I thought it was my Internet company but I started using the Cisco Connect app to fix it after restarting the router. The first time it worked great for about 2 weeks, but a few days ago it started disconnecting several times a day. Now it doesn't last 10 minutes before it quits. It tells me the firmware is up to date
View 5 Replies View RelatedI just bought a WAP321 Wireless AP. I wonder why it cannot sync with our time server automatically. Every time I reboot it, the system time become "Fri Dec 31 1999 12:00:00 UCT". I have to do the sync manually by clicking on the "Save" button under the menu Administration > Time Setting.
View 5 Replies View RelatedI have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies View RelatedAI have a Dir-825 router. The 5GHz is turned off and the wirless is on G/N. I have shawcable for my isp and my firmware is 2.06 and its a Rev B Router. I also have Qos Engine on for allowing me to have 2 xboxes on Open NAT.problem is my wireless signal for some wired reason is VERY weak. A while ago it used to work really far way outside. It was around 150ft distance at 4 bars. Now for some reason I can't even go upstairs without getting a 1 or 2 bar signal.
View 3 Replies View Relatedi have had my dir-655 one year now, have never had wireless problems with it until now.my notebook's internet gets very slow somedays, i just restart my router and then internet speed works normally.i have:
Hardware Version: A4 - Firmware Version: 1.32EU
how to ftp a file with date in it's name. for ex.reportname filename yyyymmdd.cvname with space
View 3 Replies View RelatedI am trying to restore my pc to a previous date but the calendar that displays will not go back to December - it is stuck on January.
View 1 Replies View RelatedCisco equipment without RTC defaults to "1 Mar 1993" after the reload. Why this date was chosen?
View 3 Replies View RelatedMigrating from 4.2 to 5.2 acs and have noticed there is no expiration date per internal user added. We expire users at different times due to their time on site. Is there something that has to be added to get back this basic feature we had before?
View 6 Replies View RelatedI have seen this on 4 ASA devices:At devices running older versions than 8.4(5) it is possible to update to 9.1.1 but after updating to 8.4(5) the devices tells me that "There are no upgrades available, your system is up to date" when I "Check for ASA/ASDM updates". I downgraded one device to 8.4.4 and tried to upgrade to 9.1.1 but the update was unsuccesfull (could not boot).
View 1 Replies View RelatedFor some reason this RV082 (code level v2.0.2.01-tm-20110308) has generated a SSL cert that is not valid till 2022?
How to regenerate the cert with a valid date?
SSL Certificate - Future Start Date
The SSL certificate is not valid before Mar 3 06:51:27 2022 GMT : Subject : CN=00:0c:41:92:41:71, OU=RV082, O=Cisco-Linksys, LLC, C=US, L=Irvine, SN=California Issuer : CN=00:0c:41:92:41:71, OU=RV082, O=Cisco-Linksys, LLC, C=US, L=Irvine, SN=California Not valid before : Mar 3 06:51:27 2022 GMT Not valid after .