Cisco Routers :: RV082v2 SSL Certificate Future Start Date
Mar 27, 2013
For some reason this RV082 (code level v2.0.2.01-tm-20110308) has generated a SSL cert that is not valid till 2022?
How to regenerate the cert with a valid date?
SSL Certificate - Future Start Date
The SSL certificate is not valid before Mar 3 06:51:27 2022 GMT : Subject : CN=00:0c:41:92:41:71, OU=RV082, O=Cisco-Linksys, LLC, C=US, L=Irvine, SN=California Issuer : CN=00:0c:41:92:41:71, OU=RV082, O=Cisco-Linksys, LLC, C=US, L=Irvine, SN=California Not valid before : Mar 3 06:51:27 2022 GMT Not valid after .
There is ASA with remote access VPN and users are authenticated using third party signed certificates (CA is not local in ASA).When user certificate expires i can see it in syslog messages. For example:
%ASA-3-717009: Certificate validation failed. Certificate date is out-of-range, serial number: (...)
I would like to know if there is an opportunity to view user's certificate expiry date beforehand, say, 3 days before?
Time shows as: Current Time: 2011/09/03 Sta 20:53:36 (-08:00) "Sta" day? Also, the timezone is incorrect... I did select GMT -8:00 Pacific Time, and also the "Adjust for Daylight Savings time) So, the above time SHOULD be displayed as 2011/09/03 Sat 20:53:36 (-07:00) If the intention is to show the difference from UTC/GMT. I tried the newer version but it's broken big time. :-( I could not use it at all. None of the configuration changes I made would "stick".
I purchased a new BelkinN750 DB router on 2/12/2013. It seems to think the date is Jan. 1 1970. How can i fix this problem or should I just return it and buy another brand?
I am purchasing an older home and I am going to have to rewire the networking to the house. I have decided that I am going to push forward with Fiber Optics as my main networking vehicle. As a side I am going to run COAX and Cat-6 along the same cabling routing. The Ethernet and Coax are fairly straight forward, as long as I don't go over 100meter's Cat-6 will do just fine, and can be terminated to a traditional router. The Coax will be to a splitter for television purposes only. Now the difficult and hard to find information on: My plan for the fiber is to run a zipcord Single Mode fiber line to each room of the home. I am using Single Mode Fiber because it has the highest bandwidth for future applications. These runs will be homerun back to a distribution box next to the other comms where it will plugged into a Fiber Optic Switch to network the rooms together. I am going to run 3 lines to my basement (for a home server, office, and HTPC for the basement theatre.), One line to each of the following rooms: Kitchen, Living Room, and Bedrooms. I have bought off the internet the following: 1000ft of SM Zipcord fiber ($199), 4 Fiber Optic Nic's with PCI-Express 1 connections (for $20 a piece, they only run at about 2GB/s, but I can upgrade these in the future as price comes done), 1 16-port 10GB Fiber Optic Switch with trancievers ($140), Terminals and tools: $300.
I have is about connecting my Home Fiber to the internet. I am going to start running Verizon Fios, and that is not a true fiber optic solution because they run a Fiber to their Media Converter and then Coax from there into the house, but I have talked to them and they said they can run the fiber cable into the home. I am wanting to connect that cable straight to my Fiber Optic Switch which would then be connected directly to my computers, as well as a fiber optic wireless router, and then from my switch to their ONT for tv and phone. My question is will this work? What kind of problems will I run into, and what other hardware do I need to get this up and running. I basically do not want to run copper to any of my devices..I either want them to network wirelessly or with a fiber line. (even the wireless will be running fiber since will connect directly to the fiber line via the fiber switch.)So it is expensive, but I believe it is worth it. 200ft of Cat-7 copper costs $199 vs 1000ft Fiber at the same price..and the fact that Cat-7 does have a life-limit on it's bandwidth where as fiber is the future.
we need to interconnect multiple branch office (CISCO 1841 with VWIC-1MFT-E1 ) via E1 links to the main site (CISCO 3745 with NM-8E1 IMA ). We succeeded to connect them using the same VWIC-1MFT-E1 at both sides (Branch / HQ), but I need to connect up to 10 sites in the future, so we thought that may be we can use ( NM-8E1 IMA) to make it possible and to save some space for any future upgrades. Honestly, we couldn't find any E1 related commands to configur this card (NM-8E1 IMA). Did we choosed the wrong card (NM-8E1 IMA).?
future support for IP Sla on the nexus 7000. The latest info that I've seen is that it will/could be supported in release 6.2, scheduled for mid 2012. Does this still accurate?
Our clients claims the problem of loss startup configuration with power outage especially with 877 series , all the router are configured to store configuration in NVRAM ( confreg = 0x2101),
Region : Ukraine Model : TL-WR1043ND Hardware Version : V1 Firmware Version : 3.13.11 Build 121102 Rel.51321n ISP : Volia
Is it possible to extend the functionality of USB in future firmware for data transfer? More detail about the problem [URL]can at least in beta partially implemented increase data transfer USB?I bought this router, and as all users lose .... With the Internet, download files faster than with external screw via USB.
When I try to export an SSL Certificate for a Client I get a htps . CSR file instead of the .PEM file. So, I can't update the client computer with the correct certificate.
RV042 router is giving out the outer certificate instead of server certificate. Outlook anywhere is failing and we are receiving certificate errors for any secure site behind this firewall. I'm not talking about remote management. I'm talking about people trying to access our web site, which is secured, and getting an error because the RV042 is giving its own SSL certificate instead of the Server's certificate. Firmware Version: 1.3.13.02-tm. I don't see any updates for that hardware. I do have it working on an RV042 with the same firmware at a different location. How do we turn that off or keep it from happening? Output from a test site Attempting to resolve the host name xxxx in DNS.The host name resolved successfully. Additional DetailsTesting TCP port 443 on host xxxx to ensure it's listening and open. The port was opened successfully. Testing the SSL certificate to make sure it's valid. The SSL certificate failed one or more certificate validation checks. Test Steps ExRCA is attempting to obtain the SSL certificate from remote server xxxx on port 443. ExRCA successfully obtained the remote SSL certificate. Additional Details Remote Certificate Subject:
SN=California, L=Irvine, C=US, O="Cisco-Linksys, LLC", OU=RV042, CN=68:ef:bd:b8:0f:78, Issuer: SN=California, L=Irvine, C=US, O="Cisco-Linksys, LLC", OU=RV042, CN=68:ef:bd:b8:0f:78.Validating the certificate name. Certificate name validation failed. Tell me more about this issue and how to resolve it Additional Details Host name xxxx doesn't match any name found on the server certificate SN=California, L=Irvine, C=US, O="Cisco-Linksys, LLC", OU=RV042, CN=68:ef:bd:b8:0f:78.
When I access setup on an RV220W with Internet Explorer, Mozilla or Safari the following message always displays:
"There is a problem with this website's security certificate. The security certificate presented by this website was not issued by a trusted certificate authority. The security certificate presented by this website was issued for a different website's address."
I access the router by clicking on "Continue to this website (not recommended)."
This also happens anytime a URL filter is triggered by a client. I.e., clients do not see the "Blocked by Cisco Firewall" message unless they also click on the "Continue to this website (not recommended)." option.
Even worse, when I attempt to connect as a VPN, the SLLVPN applet gets java connection refused. This is why I bought this thing!
What do I need to do to fix all these certificate related errors?
Just installed RV042 router. And it's giving out router certificate instead of server certificate so people who are trying to access our secured server are getting errors. I'm not talking about remote management. I'm talking about people trying to access our web site, which is secured, and getting an error because the RV042 is giving its own SSL certificate instead of the Server's certificate. How do we turn that off or keep it from happenning?
The RV042 firm version is v4.0.0.07-tm (Aug 19 2010 19:19:50)
how to create new unique self-signed certificate on RV120W? I can create request for singning by external CA, but I cannot create new unique self-signed certificate itself.
When I attempt to export the certificate for the quickvpn client via the router web interface, it looks as if the export works, and it asks me to save the zip file. However, upon opening the zip file I receive the error: The compressed folder is invalid or corrupted.
This happens in multiple browsers, from multiple machines.
I like to use "URL Blocking" with keywords in the firewall properties. When I activate this feauture, I get errors from the router certificate when I browsing to any site in the Internet. Is there a way to manage this problem without using a public certificate?
The establishment of IPSEC tunnel between the RV220 and QuickVPN client works properly with the security certificate of origin of the router.RV220 V1.0.3.5QuickVPN V1.4.2.1
Since the establishment of a security certificate self-signed, the RV220 and QuickVPN client refuses to work together .
Here are the log of the QuickVPN client
2011/09/27 12:45:14 [STATUS]OS Version: Windows 7 2011/09/27 12:45:14 [STATUS]Windows Firewall Domain Profile Settings: ON 2011/09/27 12:45:14 [STATUS]Windows Firewall Private Profile Settings: ON 2011/09/27 12:45:14 [STATUS]Windows Firewall Private Profile Settings: ON
I have set the RV042 up for QuickVPN access. The router config recommends turning HTTPS on in the firewall when using QuickVPN. The side effect to this is any web browser throws me certificate errors and warns me not to continue logging in to the router's config. How do I fix this so the browser does not throw these messages?
Router is Linksys-branded, using latest firmware for this hardware (1.3.13.02-tm)
After a day of troubleshooting I have finally got the QuickVPN client to work. I connect however during the connection I get: "Server's certificate doesn't exist on your local computer. Do you want to quit this connection?" I click no and it connects fine other than this error. So how do I get rid of this error? Also I have exported the client certificate from the RV110 and put it in the quickvpn directory as I saw suggested elsewhere.
Here is my log:
2011/12/21 00:39:44 [STATUS]Connecting... 2011/12/21 00:39:44 [DEBUG]Input VPN Server Address = ***.***.*** 2011/12/21 00:39:45 [STATUS]Connecting to remote gateway with IP address: **.**.**.*** 2011/12/21 00:39:50 [WARNING]Server's certificate doesn't exist on your local computer. 2011/12/21 00:39:56 [STATUS]Remote gateway was reached by https ...
i was connected to my rv042 via remote management / browser, and tried to add vpn clients. i generated a new certificate and then i clicked on export for clients. by doing this, the remote management disconnected and i cannot access the router anymore.
how can i get the new .pem file from remote? do i have to make somebody turn off and on the unit to get back remote access??
p.s.: after turning off an on i tried the same steps again: everytime i click on "export for admin" or "export for client", this kills the remote management and the unit must be hardreset. now: how do i get the newly created client certificate off that unit ?? otherwise i will have to drive 350 km just to grep that file ?!?!
I do not have a valid SSL Certificate on my firewall but I want to use SSLVPN.
If I connect to the IP adress and the SSLVPN Portal I can choose the sslclient launcher but after that I get a error that I need a internet explorer 64bit or that the active I was blocked because of a unsecure publisher.
I recently replaced my RV042 with an RV042G. I did an export of the RV042 Config and used the Config Migration Tool to upgrade the file to v3 (I had an old v1 RV042). When I first logged in to the RV042G it was quite happy and I imported the config file successfully.After installing the RV042G in my system it fired up and worked perfectly. Unfortunately when I now try to log in via the web interface it comes up with 'Invalid Site Certificate' each time. I've tried importing the certificate but that does not work as it is flagged as invalid.All I can assume is I have either imported the origional RV042 certificate as part of the config or importing the config has corrupted the original RV042G site certificate. I assume this is a generic issue and not specific to the RV042G as I have had this problem before but cannot remember how I solved it.The bottom line would be a hard reset and load all my settings manually but I can't spare the time just now.
I bought a new WRVS400n recently because it had Gigabit speed, wireless n and a built in VPN server. The device works perfect except for the Quick VPN client. I'm a system engineer so I thought I could set it up quite easy just like any other device I configured in the past. Painfull but it isn't like this.
I set up the VPN on the WRVS4400n and generated a certificate. I saved both the client and admin certificate to my pc, I gave them a name to easily make up the difference between both of them. When placing the certificate in the installed QuickVPN folder, it doesn't seem to get recognised by the QuickVPN software. When I try to connect, it says 'Server's certificate doens't exist on your local computer'. I guess the naming convention must meet some kind of format, is that correct? If so, this should have been described in the documentation.
Besides that I checked if the required ports used by the VPN server are open on the public port of the device, that is the case. So It seems I'm quite close to get it working.
The version of QuickVPN I used is 1.4.2.1. The WRVS4400n has the latest firmware loaded.
Migrating from 4.2 to 5.2 acs and have noticed there is no expiration date per internal user added. We expire users at different times due to their time on site. Is there something that has to be added to get back this basic feature we had before?
