When I access setup on an RV220W with Internet Explorer, Mozilla or Safari the following message always displays:
"There is a problem with this website's security certificate. The security certificate presented by this website was not issued by a trusted certificate authority. The security certificate presented by this website was issued for a different website's address."
I access the router by clicking on "Continue to this website (not recommended)."
This also happens anytime a URL filter is triggered by a client. I.e., clients do not see the "Blocked by Cisco Firewall" message unless they also click on the "Continue to this website (not recommended)." option.
Even worse, when I attempt to connect as a VPN, the SLLVPN applet gets java connection refused. This is why I bought this thing!
What do I need to do to fix all these certificate related errors?
I am getting the following flooding the logs on my RV220W (IP Address replaced with X.X.X.X)
2011-09-12 00:58:54: [rv220w][IKE] ERROR: Invalid exchange type 243 from X.X.X.X[500]. 2011-09-12 00:58:54: [rv220w][IKE] ERROR: Could not find configuration for
[Code].....
These are all coming from the same IP Address which is running Windows 7 Enterprise X64 using a WIRED connection.
I recently replaced my RV042 with an RV042G. I did an export of the RV042 Config and used the Config Migration Tool to upgrade the file to v3 (I had an old v1 RV042). When I first logged in to the RV042G it was quite happy and I imported the config file successfully.After installing the RV042G in my system it fired up and worked perfectly. Unfortunately when I now try to log in via the web interface it comes up with 'Invalid Site Certificate' each time. I've tried importing the certificate but that does not work as it is flagged as invalid.All I can assume is I have either imported the origional RV042 certificate as part of the config or importing the config has corrupted the original RV042G site certificate. I assume this is a generic issue and not specific to the RV042G as I have had this problem before but cannot remember how I solved it.The bottom line would be a hard reset and load all my settings manually but I can't spare the time just now.
I have a RV220W running 1.0.1.0. When trying to upgrade to 1.0.4.17 I receive an error: "Upgrade failed due to invalid/corrupted firmware".
I found this article: [URL]
I assume I have to do a factory reset then an upgrade in order to upgrade properly.
If I do a backup running 1.0.1.0, then upgrade to 1.0.4.17, then do a restore, would that put me back to 1.0.1.0? I'm trying to avoid configuring the router manually all over again.
The establishment of IPSEC tunnel between the RV220 and QuickVPN client works properly with the security certificate of origin of the router.RV220 V1.0.3.5QuickVPN V1.4.2.1
Since the establishment of a security certificate self-signed, the RV220 and QuickVPN client refuses to work together .
Here are the log of the QuickVPN client
2011/09/27 12:45:14 [STATUS]OS Version: Windows 7 2011/09/27 12:45:14 [STATUS]Windows Firewall Domain Profile Settings: ON 2011/09/27 12:45:14 [STATUS]Windows Firewall Private Profile Settings: ON 2011/09/27 12:45:14 [STATUS]Windows Firewall Private Profile Settings: ON
I do not have a valid SSL Certificate on my firewall but I want to use SSLVPN.
If I connect to the IP adress and the SSLVPN Portal I can choose the sslclient launcher but after that I get a error that I need a internet explorer 64bit or that the active I was blocked because of a unsecure publisher.
When I attempt to export the certificate for the quickvpn client via the router web interface, it looks as if the export works, and it asks me to save the zip file. However, upon opening the zip file I receive the error: The compressed folder is invalid or corrupted.
This happens in multiple browsers, from multiple machines.
I just received and installed my RV220W today. Everything was working fine. I was down to configuring SSL VPN as my last step. I was reading through the documentation and than went back to the management console to make a change. The session timed out. When it prompted me to login again I keep getting a message on the screen "i18nHTMLMissing", nothing else. (Ruby on Rails Error?) I can't seem to login anymore. All logins result in this message. I have tried from multiple devices with the same result.
I am locked out of the rv220w. After typing in username and password into the admin page I get "i18nHTMLMissing". I can't clear the error, even after a reboot/reset of the router. Any wat other than a factory reset? This is a brand new box .
What does this error message mean? What is wrong? Appears when adding a new One-To-One NAT rule. The first rule is OK. When I try to add a rule nr. 2, this error message occures.
I just got myself a Cisco RV220W, connected my laptop to configure it. I receive an IP adress by DHCP (192.168.1.x) and can ping the router (192.168.1.1). However, when I try to connect to the router by the web interface, I receive this message in my browser (Chrome):
The webpage at https://192.168.1.1/ might be temporarily down or it may have moved permanently to a new web address. Error 113 (net::ERR_SSL_VERSION_OR_CIPHER_MISMATCH): Unknown error.
In FireFox: Secure Connection Failed An error occurred during a connection to 192.168.1.1. Cannot communicate securely with peer: no common encryption algorithm(s). (Error code: ssl_error_no_cypher_overlap)
In IE9: I get no error message, the page never loads
Is it DoA or how to get connected to the web interface?
I try to connect to RV220W with windows 7 client but I fail : error 789. I compare again and again pre shared key, but it doesn't change anything. How to connect to RV220W with IPsec client ?
I am having some problems with my AnyConnect configuration.I have configured AnyConnect (ssl vpn / webvpn) on my Cisco 1841 Router, and I can access it from a web browser and start the tunnel, then anyconnect starts up and then the problem come, because when AnyConnect is trying to connect it comes with an error saying "The certificate on the secure gateway is invalid".
I have read almost all of the threads in here about the problem also tried to make a new certificate, but nothing is working?
i just deployed Cisco NAC version 4.8.1 Virtual Gateway OOB on a LAN envieronment and on a WLAN envieronment, it works fine for some users , they can authenticate via the agent or web page, and then they are redirected to the access vlan, But for some other users in LAN and WLAN , when they try to authenticate via agent or web page the following error appears:
Invalid switch configuration-OOB Error:OOB client "mac/ip" not found.
I tried to find some pattern for the users but it dont match any pattern.
Whenever I use the following command I get an invalid input error
ciscoasa#conf t ciscoasa (config) # crypto isakmp enable outside ciscoasa (config) #object network net-local ciscoasa (config-network) # subnet 192.168.101.0 255.255.255.0 ^ I have reset the firewall (cisco 5505) to factory default. The marker ^ is under the subnet
I am having the Cisco NAC enviroment (Software Version is 4.9.1) and OOB VG.
We are getting the below and attached Error while deploying on some machines.
"Invalid switch configuration-OOB Error:OOB client "mac/ip" not found."
Some users on same switches are working fine but some are not....
What would be the possibilities and any work around? other than keeping the port shudown for long time means that atleast 10 - 20 secs or more or a PC restart. Customer is not feeling comfortable with the current situation.
one of our customers wants to update the firmware of a 5508 wlc, but always gets the following error message:
Error Message %UPDATE-3-INV_FILE_SIGN: Error! Invalid image signature!. Image may be corrupt.
but the same image works fine on another 5508.the update was downloaded via a smartnet for the wlc, on which the update works fine. does the customer has to download another image for the second controller, or should the image work on both wlc?
I have connected an ASA 5505 to an ADSL router that is able to assign the IP address and the also the DNS servers for the ISP for the outside interface. The ASA is loaded up with IOS "asa842-k8.bin"
I am using vpnclient with a hostname as oppose to an IP address to connect to a headend remote server. If I hardcode the DNS servers IPs in the "dns server-group DefaultDNS" I am able to resolve the hostname. If I then remove the IPs from the group and rely on the dhcp to assign them, when I try to resolve the name I have an error at the console "ERROR: % Invalid Hostname"
computer was working fine a few days ago, all of the sudden not able to get online anymore at all,recieve error message 651 with dsl connection, and when trying to connect to wireless get an error message saying invalid ip adress configuration,
ipconfig/all reveals: C:Usersygydfre>ipconfig/all Windows IP Configuration Host Name . . . . . . . . . . . . : bygydfre-PC[code]......
I recently bought the E2500 Router and I am using the EA2500 Adapter with it . I have this set-up on 2 Desktop PC's . 1 Pc is working just fine with this set-up . The other keeps giving me an Error message of "Invalid Key Manual" . What does this mean ? The adapter is working because it does find the Router as a usable connection . It just isn't able to connect to it and keeps giving me the same Error message .
"The license is invalid." (Error code:2268435460) it happens with all versions tested on several PCs (Win2003 Server, WinXP). Already tried to reboot, edit the registry, etc but no luck. Using 3 dcs 2121?
I've recently installed ssl certificates for our web auth guest interface on our WLC's. I discoverd the they required a Level 2 certificae to work properly. We are getting an untrusted certicate on our 802.1x ssids that authenicate against a 5500 ASA..A certificate was insatlled and has an error, show the certificate as untrusted, my questionis, does the 5500 ASA require a level 2 certifate as well?
Cisco ISE 1.1.1 is given Certificate error while trying to access any of nodes. It is started after adding other nodes in to primary node. Accessing by IP's redirect to other nodes suppose if we accessing primary admin node by IP, it redirect to other nodes (secondary nodes or other nodes).
I just upgraded our AnyConnect package on our ASA5510 from 3.06xxx to 3.1. When I tried to log in to the website to automatically install the client, it showed me a big error saying the Certificate is untrusted and I have to explicitly accept it. After accepting it, I had to restart the installation.Is there a way to disable this strict certificate trust setting? We don't have a valid SSLVPN certificate yet, but this big error will confuse endusers.
When I get the web authentication dialog from 1.1.1.1 it starts of with a certificate error. Is there a way to prevent this certificate error while using the self signed certificate? I have not been successful installing certificates on my WLC - problems with OpenSSL and others. Want to get this deployed but don't want users to have to encouter that error.
We find ourselves in a difficult situation with the Cisco VPN Client version 5.0.07.0290 where it keeps giving us an
"Error 42: Unable to create certificate enrollment request"
When we attempt to use the Online enrollment method to create and enroll a new certificate. There is no additional information in the VPN client logs where we have set 3-High for all logs. In addition, Wire shark does not show any packets sent from the machine running the client to the Cisco 3825 router which runs the Cisco CA.
To create and enroll a certificate we do the following:
1. Click on the Enroll button to show the Certificate Enrollment dialog 2. Select Online 3. Select <New> for Certificate Authority 4. Enter http://192.168.120.1 as CA URL (note, 192.168.120.1 is the IP of the Cisco 3825) 5. Click Next to display the dialog where we can enter certificate details 6. Enter details in all fields except IP Address and Domain 7. Click Enroll which shows a dialog with the Error 42 ... message in it.
If we attempt to create a request by using the File method, all works fine, that is, the client creates a file with the enrollment request. The fact that the client does not send any messages to the Cisco CA leads us to believe that we have a problem on the client machine. However, the client does not write any information in the logs, so it is a bit hard to fix the problem. I can provide additional configuration information if required for both the client and the Cisco CA. Note that we have not modified any client configuration. Basically, we installed the client on a Windows 7 64bit machine and attempted the steps listed above.
We purchased a Cisco 541w router for one of our customers.
The main reason was to provide them with 3g backup solution for their business.
In order for the router to recognise the 3G router the firmware was upgraded SRP540_1.02.01_023_081211_1136.
We arrived on site last night to do the install but couldn't make any changes to the already configured router. Every time we attempted add a vlan or adjust the dhcp scope the router would return "The values are invalid".
Worked at this for over 1 hour and then decided to factory reset the router to see if that would revert the router to use the original firmware.
This didn't revert to the previous firmware but we magically could now make network changes without problem.
So everything was good, we reconfigured the router, tested 3G and failed the wan1 interface back and forth and the customer was very happy.
Customer arrived onsite this morning and the router was running on 3G. Every 8 - 10 minutes it was attempting a failover between connections.
I decided to turn off the failover for the time being and investigate further but yet again i was back to "the values are invalid"
We've had to pull the router as the customer is about 2hours away and revert back to their BT router.
Found this document for another SRP model - A warning message may appear in the Basic Wireless Settings screen with the text “The values are invalid” when modifying the wireless profile. Set the SRP 521W to its default setting (CSCtd49614).
[URL]
Will firmware SRP540_1.2.4_003_011112_1847 released only 2 days ago cure the problem?
Just bought the N150 router. Trying to enter the router setup for the first time. I leave the password blank like it tells me to, but it says i have an incorrect password. Tried pressing reset button for 10 seconds, but get same result.
I'm tryng to configure a vpn with a cisco small business pro router, model srp527W-k9-g5 But when i try to set the “remote ip” in Remote traffic selection a I have to set (10.0.0.0) a message said:
“Invalid IP Address Format”
If i change the ip and i put 10.0.0.1 i have not error but I have to put 10.0.0.0 and if i configure it on a cisco WRV210 (por example) i have no error.
There is ASA with remote access VPN and users are authenticated using third party signed certificates (CA is not local in ASA).When user certificate expires i can see it in syslog messages. For example:
%ASA-3-717009: Certificate validation failed. Certificate date is out-of-range, serial number: (...)
I would like to know if there is an opportunity to view user's certificate expiry date beforehand, say, 3 days before?
