Cisco Routers :: Self-signed Certificate With RV220W And QuickVPN Client?

Nov 21, 2011

The establishment of IPSEC tunnel between the RV220 and QuickVPN client works properly with the security certificate of origin of the router.RV220 V1.0.3.5QuickVPN V1.4.2.1
 
Since the establishment of a security certificate self-signed, the RV220 and QuickVPN client refuses to work together .

Here are the log of the QuickVPN client

2011/09/27 12:45:14 [STATUS]OS Version: Windows 7
2011/09/27 12:45:14 [STATUS]Windows Firewall Domain Profile Settings: ON
2011/09/27 12:45:14 [STATUS]Windows Firewall Private Profile Settings: ON
2011/09/27 12:45:14 [STATUS]Windows Firewall Private Profile Settings: ON

[code].....

View 4 Replies


ADVERTISEMENT

Cisco Routers :: RV120W - Create New Unique Self-signed Certificate?

May 9, 2012

how to create new unique self-signed certificate on RV120W? I can create request for singning by external CA, but I cannot create new unique self-signed certificate itself.

View 2 Replies View Related

Cisco Routers :: RV220W / What Exactly Is QuickVPN

Apr 2, 2012

what exactly is QuickVPN?Is it a IPSec VPN?Is it a PPTP?Is it a SSLVPN?can I resolve my local hostnames? That means, can I configure a lokal DNS Server?

View 3 Replies View Related

Cisco Routers :: RV220W QuickVPN Limited To 10 User Instead Of 25?

Oct 11, 2011

I just bought a RV220W for my small company. I have read everywhere that this model come with 25 license for QuickVPN/IPsec.But when I tried to create all my account I had a bad surprise. The firmware tell me that the maximum number of user that I can create is 10! I dont see anywhere in the firmware where I can upgrade for another licence. I have the last firmware.

View 7 Replies View Related

Cisco Routers :: QuickVPN From One RV220W To Other - No Webpage Access?

Dec 19, 2011

Using QuickVPN from one RV220W to another RV220W I cannot access the Webpage of the remote router.  Goes to "CERTIFICATE NOT VALID" then click through that, and the the login page will not come up.  Sceen flashes a hint of blue background, then turns white, then just sits there saying "Waiting for response from ???.???.QuickVPN will sucessfully connect and I can use all computers behind the router.  Just cannot access the Webpage of the remote router.  I can access the Webpage of the local router.Also, when I hookup using QuickVPN from an "Internet Cafe" that is using a Netgear router.  I can then access the webpage on both remote routers (of course, depending on whom I QuickVPN'd into at the time).
 
Location #1
Office #1
RV220W:  RV220W-A-K9-NA    SER: SER15140314Firmware:  1.0.3.5
IP: 192.168.63.1
 Location #2
Office #2
RV220W: RV220W-A-K9-NA SER: SER151600R2
Firmware: 1.0.3.5
IP: 192.168.2.1
 
I have called Cisco on this with no luck.  They said to update my JAVA.  I am currently JRE 6 Release 30 and still no luck.  The Log files reveal nothing and are darn near unreadable since there is no line breaks in the log file.  Have to manually edit the log to pick stuff out.

View 1 Replies View Related

Cisco Routers :: RV110W And QuickVPN - Servers Certificate Doesn't Exist

Dec 19, 2011

After a day of troubleshooting I have finally got the QuickVPN client to work.  I connect however during the connection I get: "Server's certificate doesn't exist on your local computer.  Do you want to quit this connection?" I click no and it connects fine other than this error.  So how do I get rid of this error? Also I have exported the client certificate from the RV110 and put it in the quickvpn directory as I saw suggested elsewhere.

Here is my log:
 
2011/12/21 00:39:44 [STATUS]Connecting...
2011/12/21 00:39:44 [DEBUG]Input VPN Server Address = ***.***.***
2011/12/21 00:39:45 [STATUS]Connecting to remote gateway with IP address: **.**.**.***
2011/12/21 00:39:50 [WARNING]Server's certificate doesn't exist on your local computer.
2011/12/21 00:39:56 [STATUS]Remote gateway was reached by https ...

[code]....

View 2 Replies View Related

Cisco Routers :: RV220W Suddenly Lost QuickVPN Connectivity?

Jan 15, 2013

RV220W worked good with QuickVPN, but suddenly lost such ability and doesn't allow connection from any Windows machine (Xp,Win7 32/64 bit)

QuickVPN is ver. 1.4.2.1
Cisco RV220W firmware is ver. 1.0.4.17
 
Client error on Windows XP in Log.txt :

[STATUS]OS Version: Windows XP
[STATUS]Windows Firewall is OFF
[STATUS]One network interface detected with IP address 10.1.1.165
[STATUS]Connecting...
[DEBUG]Input VPN Server Address = x.x.x.x

[code]...

View 4 Replies View Related

Cisco Routers :: WRVS400n - QuickVPN Server's Certificate Doesn't Exist On Local Computer

May 7, 2012

I bought a new WRVS400n recently because it had Gigabit speed, wireless n and a built in VPN server.  The device works perfect except for the Quick VPN client.  I'm a system engineer so I thought I could set it up quite easy just like any other device I configured in the past.  Painfull but it isn't like this.
 
  I set up the VPN on the WRVS4400n and generated a certificate.  I saved both the client and admin certificate to my pc, I gave them a name to easily make up the difference between both of them.  When placing the certificate in the installed QuickVPN folder, it doesn't seem to get recognised by the QuickVPN software. When I try to connect, it says 'Server's certificate doens't exist on your local computer'.  I guess the naming convention must meet some kind of format, is that correct?  If so, this should have been described in the documentation.
 
Besides that I checked if the required ports used by the VPN server are open on the public port of the device, that is the case.  So It seems I'm quite close to get it working.
 
The version of QuickVPN I used is 1.4.2.1.  The WRVS4400n has the latest firmware loaded.

View 1 Replies View Related

Cisco :: Can LMS 4.0 Use CA Certificate Instead Of Self-signed

Apr 4, 2012

I've been reading over the documentation, but only see instructions for using a self-signed certificate for SSL.  Or even trusted certificates between LMSes.  But I can't seem to find anything on LMS 4.0 using a Certificate Authority.  And I have a security requirement to do so.
 
Is this possible in LMS 4.0?

View 3 Replies View Related

Cisco Routers :: RV220W Invalid Certificate Error

Oct 15, 2012

When I access setup on an RV220W with Internet Explorer, Mozilla or Safari the following message always displays:
 
"There is a problem with this website's security certificate. The security certificate presented by this website was not issued by a trusted certificate authority. The security certificate presented by this website was issued for a different website's address."
 
I access the router by clicking on "Continue to this website (not recommended)."
 
This also happens anytime a URL filter is triggered by a client. I.e., clients do not see the "Blocked by Cisco Firewall" message unless they also click on the "Continue to this website (not recommended)." option.
 
Even worse, when I attempt to connect as a VPN, the SLLVPN applet gets java connection refused. This is why I bought this thing!
 
What do I need to do to fix all these certificate related errors?

View 3 Replies View Related

Cisco VPN :: 871 - Import A Self Signed Certificate

Sep 27, 2012

Can I import a self signed certificate from a Cisco 871 router to a Cisco ASA 5505? The 5505 replaced the 871 and I have a VPN that goes to another company that we have a connect to. The device on the other end is a VPN concentrator ( I do not have access to modify this device without going through multiple channels.) I only need to mimic this device for the site to site VPN tunnel only. It appears that there are no pre-shared keys only a self signed certificate.         

View 1 Replies View Related

Cisco :: ACS 5.3 / Self Signed / Certificate Base Authentication

Oct 17, 2012

Our ACS (5.3) has self signed certificate, we have exported it and declared it in Certificate Authorities.We have exported it to have a Trusted Certificate for client machine.
 
This certificat has been installed on a laptop.The wlc is successfully setup for eap (peap & eap-fast has been tested > ok)I have this error in the log:
 
12514 EAP-TLS failed SSL/TLS handshake because of an unknown CA in  the client certificates chain.I think the Access Policies (identity & authorization) are misconfigured: [code]

View 1 Replies View Related

Cisco Routers :: RVS4000 - VPN Client And QuickVPN On Same Windows PC

Sep 21, 2011

Is there a safe way to use the Cisco VPN Client (V5.x) and Cisco Quick VPN (V1.4.1.2) on the same Windows PC?  I need to access my office RVS4000 and my customer's PIX 506 from the same laptop (but not at the same time).
 
Perhaps I should be asking "Is there a single Windows VPN client that works with both the Cisco RVS4000 and Cisco PIX 506? I have seen these questions asked on various forums but have yet to see a definitive answer. 

View 2 Replies View Related

AAA/Identity/Nac :: ACS V5.2 New Self Signed Certificate Not Showing In Browser

Nov 11, 2012

I have just renewed the self signed certificate on a v5.2 ACS and expiry date of 2013 is showing in the ACS GUI. However, when I start an ACS Admin session and view the certificate information in the browser it is showing the old expiry date of 2010. I have tried this in IE and Firefox and the certificate information is the same.
 
Is there a way I can get the browser to pick the new certificate ?

View 1 Replies View Related

Cisco Routers :: RV220W SSLVPN - Don't Have Valid SSLA Certificate On Firewall

Apr 3, 2012

I do not have a valid SSL Certificate on my firewall but I want to use SSLVPN.
 
If I connect to the IP adress and the SSLVPN Portal I can choose the sslclient launcher but after that I get a error that I need a internet explorer 64bit or that the active I was blocked because of a unsecure publisher.

View 1 Replies View Related

Cisco :: 5508 Unable To Upload Signed Certificate

Jul 1, 2012

I have two Cisco WLC 5508 controllers that I'm trying to set-up for our new corporate WLAN. I've gone through most of the configuration fine but have ran into an issue uploading a signed certificate to one of my controllers. I should point out that I have managed to upload the certificate successfully to one of the controllers, I just can't seem to upload it to the second.The issue is as follows:
 
- I've logged into the controller, gone to Security -> Web Auth -> Certificate -> Download Certificate
- I've specified my tftp server details and selected apply
- the process begins and I can see through my tftp client that the controller is attempting to copy and install the certificate
- The controller tries to install the certificate but fails, reporting the same

View 9 Replies View Related

Cisco :: 2048 - Self-Signed Certificate And Init 6 Process

Feb 16, 2012

I have a doubt about CiscoWorks. I need to generate the self-signed certificate with a key of 2048 bits to generate a CA with VeriSign. CiscoWorks do this automatically with a key of 1024 bits and I do not find a form to elect a a diferent key. Is it possible to generate a certificate with 2048 bits key?

Another problem is that I have CiscoWorks installed on Solaris. Many times at day the web application does not work and the only way to recuperate it is with the command "init 6" and I have to way 15 minutes until I can have access again. Why is produced this error? Who can I fit it?

View 1 Replies View Related

Cisco Routers :: RV042 - QuickVPN Versus Standard VPN Client

Nov 15, 2011

I have a RV042 router setup with Client to gateway VPN access, and am connecting with a W7 PC running QuickVPN. We have many PC's that already have the standard CiscoVPN client on them, is it possible to configure the RV042 to allow these clients to conenct? I'm not sure how to get the Mutual authentication to work, or how to import the PEM certificiate into that client. It seems to allow it to import, but I can never select it.

View 2 Replies View Related

Cisco Routers :: RV082 - QuickVPN Client Causes Windows 7 Bluescreen

Nov 21, 2012

I have a Cisco RV082 and can successfully connect with the Cisco QuickVPN Client, 1.4.2.1. However, after 1 to 5 minutes I see the Windows 7 bluescreen indicating that the system has halted due to a problem with a driver. I have installed the latest Windows updates and reinstalled the client.
 
The bluescreen only occurs if I use the Cisco QuickVPN Client.

View 4 Replies View Related

Cisco Wireless :: RV180W - Generate Proper Self Signed Certificate?

Dec 19, 2012

Right now the Self-signed Certificate on my RV180W generates errors as it was issued to the MAC address instead of the current IP address. Need instructions on Generating a Self-Signed certificate (or 1 from my Windows Server 2012 Certification Authority) that will eliminate the constant barreage of certificate errors I get when trying to access the management interface of my device?  the internal domain is mythos.local, netbios name of MYTHOS, and the device name in question is surtur.

View 2 Replies View Related

Cisco Routers :: Quickvpn / Client To Gateway Vpn Rv042 Can Only Ping Router?

Jan 27, 2012

I am setting up remote access using an RV042 router.  Using quickvpn or a client-to gateway vpn and shrewsoft client,  I can only access/ping the LAN side of the remote router and one machine on the remote network.  The PPTP server and native Windows 7 connection provide access to all machines on the remote network.I have 2 possible reasons for this and would like to find the real reason:
 
1) The remote RV042 is behind another router, and that router restricts access other than the PPTP traffic.

2)  The VPN tunnels other than PPTP only allow access to the remote LAN side of the router and remote machines that have the remote router defined as their gateway in the IP configuration.

View 2 Replies View Related

Cisco Routers :: RVS4000 - QuickVPN Client / Cannot Connect To Drive Or Computer

Sep 1, 2011

I have a RVS4000 router, and using Quick VPN client (latest version, 1.4.2.1?) on a computer with Windows Vista.  I can connect to the router, and I can see computers, and drives on the network. When I click on a drive or computer, I can't connect to the devices.  Local IP address are 192.168.1.x, remote is 192.168.2.x.

View 9 Replies View Related

Cisco Firewall :: ASA5520 HTTPS SSL Certificate Signed Using Weak Hashing Algorithm

Oct 18, 2011

I am support one client for,  whom falls under Security  scans mandatory for new implementation of ASA 5520 device.  The client uses Nessus Scan and  the test results are attached.The Nessus scanner hit on 1 Medium vulnerabilities.

View 2 Replies View Related

Cisco Routers :: Stuck At Verifying Network QuickVPN Client RV 120W - Windows Vista

Sep 15, 2011

I recently installed a new RV120W router at one of my customer's office. I have 2 users connecting using the Quick VPN software.The first one is running on a Windows XP Pro SP3. Everything works great on this PC.The second PC is running on a Windows Vista - The QUICKVPN client stays at Veryfing Network and Eventually I get an error " The remote gateway is not responding. Do you want to wait?I have disabled Firewall on both PCS for troubleshooting purposes.

View 1 Replies View Related

Cisco Routers :: RV120W - SSL Certificate For Client

Oct 30, 2011

When I try to export an SSL Certificate for a Client I get a htps . CSR file instead of the .PEM file. So, I can't update the client computer with the correct certificate.

 Firmware: 1.0.2.6 

View 3 Replies View Related

Cisco Routers :: WRVS4400N - Server Certificate To Get VPN Client To Work?

Dec 12, 2011

WRVS4400N Where is the Server Certificate located to get the VPN Client to work?

View 2 Replies View Related

Cisco Routers :: RV082 VPN Client Certificate Export Error

Jan 26, 2012

When I attempt to export the certificate for the quickvpn client via the router web interface, it looks as if the export works, and it asks me to save the zip file.  However, upon opening the zip file I receive the error: The compressed folder is invalid or corrupted.
 
This happens in multiple browsers, from multiple machines.

View 1 Replies View Related

Cisco Routers :: PPTP VPN Client To RV220W?

Aug 8, 2012

I Have RV220W Rev 1.0.3.5/I want to create 5 users adn connect remotely to the office network using a PPTP connection.
 
I have enabled the PPTP server and created users.From a remote location (WAN) on Windows 7, I have created a PPTP connection and I can connect however I can not ping or map to the office network.

View 13 Replies View Related

Cisco VPN :: Using The QuickVPN With RV220W?

Jul 13, 2011

I have configured the RV220W based on the user guide (which doesn't say much), created IPsec User and installed QuickVPN 1.4.1.2 on a remote computer. I launched the application filled out the login info and it connects but what's next?I can not ping any IP from the LAN attached to the remote router nor map any shared devices.I was hoping after a succesful connection to see my local IP address change to the one from the LAN I am remotely connected to...

View 4 Replies View Related

Cisco Routers :: Setting Up Static IP For Client Rv220W

Dec 16, 2011

Initial setup with RV220W completed without difficulty,Need to set up static IP for one of the machines in the LAN (not static IP for WAN),I presume I use the static DHCP option, which allows me to select a particular IP for the machine I select based on it's MAC,1. My confusion stems from the manual stating that "the IP address that you pick should be outside the DHCP address range specified on the Networking> LAN(local network)>IPV4(local network)page".,Does that mean that the range on the IPV4 local network page should be modified to exclude the IP address that I want to use for the static IP..e.g. change the range from 1-255 to 1-200 and then use an IP of XXX.XXX.X.201 for instanceor does that mean that as soon as I choose an IP on the Static DHCP page, that if will reserved for use only on that machine and not used for another machine on the LAN, without me having to do something else to exclude it's use (i.e. does reserving a static IP automatically remove it from the range of IPs available to other machines)If I simply set a static IP on the local machine by going to "change network adapter" settings, what's the liklihood that the router might use the same IP on another machine.

View 2 Replies View Related

Cisco Routers :: RV220W SSL Connection Via Open VPN Client

Sep 27, 2011

I'm wondering if it's possible to setup SSL VPN connection via OPEN VPN client?I'm a Mac OS 1.7 user with Tunnelblick.
 
I tried to use "built-in" SSL VPN Tunnel client but unfortunately it's not working - during installation Java exception appears saying that either I don't have admin privileges or there is not enough space.. Of course I'm admin and there is plenty of space...

View 5 Replies View Related

Cisco VPN :: RVS4000 / QuickVPN Certificate Doesn't Exist

Jul 26, 2011

I have created a VPN client account on my RVS4000 router. I have installed Quick VPN on my laptop in the default directory -- Program Files (x86) / Cisco Small Business / Quick VPN Client
 
I have generated and exported a certificate -- RVS4000_Client.pem -- and placed that in the  Program Files (x86) / Cisco Small Business / Quick VPN Client directory. When I attempt to connect using the Quick VPN client, I get the warning "Server's certificate doesn't exist on your local computer."
 
If I ignore the message I can log in, and ping resources inside the network and log into the router. However, I cannot mount any drives and the router shows that no VPN tunnels exist. I've read several posts here and elsewhere and can't seem to see where I've gone wrong.

View 1 Replies View Related

Cisco Routers :: Windows 7 32 Bit IPSec Client To RV220W Error 789

Oct 9, 2012

I try to connect to RV220W with windows 7 client but  I fail : error 789. I compare again and again pre shared key, but it doesn't change anything. How to connect to RV220W with IPsec client ?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved